Subcontracted Stock at Vendor has quality problem - must be blocked

We have stock at a Vendor (Special Stock Type O) that has a possible quality problem. It must be put on hold until we determine the extent of the problem.
It is still showing up in MD04 as available stock. I tried to move it to QI with movement 322 but it still shows up as available.
How can I block that stock from consideration by MD04 without physically removing it from the Vendor?
Thanks in advance.
Best regards to all!

Hi ppkk,
Thanks for your thoughts.
The problem is that this stock is at the vendor, so there is no storage location. We have Quality related Storage Locations for stock in the plant, and if we move parts to those storage locations they do not show up as available stock in MD04.
But the Special Stock type O is just "Stock at Vendor" with no Storage Location.
I think that we would have to receive the stock back into our plant in order to move it to a Quality related Storage Location.
Does that make sense?
Thanks again.

Similar Messages

Subcontracting stock at vendor

Hi SAP Gurus,
I have an issue with subcontracting stock at vendor. The scenario is we sent materials for subcontractor processing and we also did a GR against the subcontracting PO. now in MMBE, the unrestricted stock is shown in current quantity but it is also showing that stock is still with the subcontractor( the quantity which we initially sent with subcontracting PO for processing). Why is it so? can anybody pl help me on this.
Thanks in advance
Anusha

Hi Srinivas,
Thanks so much for the reply. I just had a quick question. When we receive the goods from the subcontractor, i mean after the GR, when we go to ME2o, do we still see the stocks at subcontractor? becuase we have completed the GR process and also do we see the stocks in MMBE? please lemme know. Thanks in advance
Anusha

Problem in issuing RM's in spcl stock to vendor in subcontracting scenario

Hi all,
Scenario:
I am working with Make to order scenario. In this scenario, the client is sending 2 raw materials to the vendor and the vendor is adding 2 more raw materials and assembles all the RM's to manufacture semi finished product. After that, our client will do GR for that semi finished and use that SFG for finished goods production. I will run MRP against sales order in MD50 so that all the raw materials procured will come under special stock.
Issue:
Now my problem is i am not able to issue the raw materials under special stock to the vendor. Is there anything to do from PP point of view to solve it.
Please let me know in case of any clarifications.
Regards,
Krishna Chandra

Hello,
You can use operation subcontracting.
Please find the the link below to see operation subcontracting in detail:
http://www.sap-img.com/production/two-types-of-subcontracting-relevant-for-pp.htm
Regards,
Alok Tiwari

TS1538 I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions

. I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions?

Hello Alexdad,
We've an article that can help get your iPod Nano working with your computer.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Cheers,
Allen

How to clear the stock of material provided to vendor(subcontracting stock)

Hi SAP Gurus,
Please let me know how to clear the stock of material provided to vendor(subcontracting stock) and need your help in what senario this stock will show in " Matl prov. to vendor "
Thanks and Regards,
SHARAN.

Hi Sharan,
Matl Povided to Vendor stock will appear in Subcontracting scenario.
If at all you have given some material to a subcontractor , this will be consumed automaticaly when you will recieve the ordered material from subcontractor.that is 543 movement will take place in the backgroung when u do the GR.
In case if u need to clear the stock u can do 542 and take the stock back to unrestricted.
Edited by: Donsandy on Jan 21, 2009 6:19 PM

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

Customer's Subcontracting Stock

Hi friends,
I need to take the Customer's subcontracting mateial in my SAP system, howcan I take the goods in system and what will be the further process uptill delivery to customer.
Please suggest the solution.
KRaheja.

Dear,
In subcontracting, vendor receives the components used to manufacture a finished product. Your company then orders the finished product in a purchase order. The components required by, and subsequently provided to, the subcontractor to manufacture the ordered product are listed in the purchase order. A bill of materials is used to determine the required components.
In simple, subcontracting is the process in which a material or product consisting of certain components is procured from a vendor, where by these components are provided by the ordering enterprise, either directly or through a third party (another vendor).
The material subcontractor is to manufacture can be requested in a purchase requisition and ordered via a purchase order or scheduling agreement item category L (Subcontracting). Item category L enables you to create sub items covering the components to be provided to the subcontractor. The components can be entered manually or through a BOM if already exists for the ordered material.
The goods receipt for the requested material posted with reference to the subcontracting item. At the same time, consumption of components also posted.
Check stocks of material provided to subcontractor:
LOGISTICS u2013 MM u2013 PURCHASING u2013 PURCHASE ORDER u2013 REPORTING u2013 SC STOCKS PER VENDOR
You can store conditions and enter vendor dependant purchasing data in subcontracting info record or in outline purchase agreement (contract or scheduling agreement).
For an outline agreement with item category L, the fact is that you do not enter the components until you create a contract release order. Similarly in case of scheduling agreement, the components are pulled at the time the delivery schedule lines are created. In both cases the BOM is advisable. In quota arrangements you have to enter special procurement type L.
If you change the PO or scheduling agreement quantity, the quantities of components also changed proportionally u2013 provided that fixed quantity indicator has not been set.
If you change the delivery date, only the date on which the components are required are recalculated.
The item category L has the following effects:
The PO item can be created with or without a material master record. If a PO item created with material number, specification of an account assignment category is optional.
The indicators for goods receipt and invoice receipt are set on the basis of the Purchase order item Linked indicator.
The GR indicator cannot be changed. This means that a goods receipt must be posted against the purchase order. However the IR indicator can be unset.
The indicator for non-valuated goods receipt is not proposed; neither can it be set manually.
http://help.sap.com/saphelp_dimp50/helpdata/EN/bc/5bba42a75fc611e10000000a1550b0/content.htm
http://www.sap-basis-abap.com/pp/subcontracting-in-sap.htm
http://www.sap-img.com/materials/sub-contracting-cycle.htm
http://www.sap-basis-abap.com/sapmo005.htm
Regards,
Syed Hussain.

Returns sale order stock from returns to quality error

Dear All,
For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
kindly give your suggestion for this error.
Regards,
sakthivel

For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
SAP has returns set up to create 06 inspection lots. These are not stock relevant. In this case the inventory goes into the return stock category and another move must be done to move the material to unrestricted or blocked as needed it will not allow to move to QI
If the material should go into QI stock and be under QI control, then config must be changed to use the 05 inspection type instead of 06.
We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
In SPRO SD schedule line category for returns(DN) change movement type to 655 and make relevant settings for QM movement types.
Check below relevant thread for more information
sales return
Cheers
KK

Transfer posting of subcontracting stock with mvt type 541 from project stk

Hi,
we run project MRP and the requirement is raised for subcontracting item also ,after converting the PR into PO when I try to transfer post material in MB1B using 541 ,system shows Error Purchase order does not contain any item even I have material in my project stock,what may be the reason?
Regards
Kantha

Hello Kantha,
The components which you provide for a vendor are manged in a vendor-related special stock, O. This stock is updated at plant level, becuase material is actually not in your plant. If you want to provide stock to vendor the avialble stock types in subcontracting are from un restricted use and in quality inspection.
When you provide componets to vendor via transfer posting this needs to go from only unrestricted use stock to the stock of material provide to vendor movement type is 541.
So to execute the transfer posting for the stock of material provided to the vendor, you have to specify special indicator O, if not the transfer posting will not differ from normal transfer posting.
Also T-code MBLB will help you in evaluating the stock of material provided. So you need to transfer the stock from project stock to unrestricted stock to carry out the transfer.
Br,
Tushar

About Movement type used in Goods Issue from Subcontracting Stock directly

HI SAP MM Expert,
We have transfer material to subcontractor through transfer posting using Mvt. 541 and raised subtracting challan also. Material is not returned by Subcontractor and now we want to debit Subcontractor A/c . For w we want to mkae Goods Issue (Direct consumption) from Subcontracting Stock and raised debit note subcontractor through FI. In this case what movement type & Transaction code should be used to consume stock from subcontractor account and t.code for raising debit note to subcontractor in SAP R/3 system.
Pls. suggest the process.
Regards
VKM

For subsequent adjustment to subcontracting stock use transaction MB04
If the vendor informs you that a greater or smaller quantity of the components was actually consumed than planned in the purchase order, you must post a subsequent adjustment to correct the goods issue posting. The value of the goods receipt is recalculated to include the
subsequent adjustment quantity. (SAP transaction MB04)
Subsequent Adjustment to Subcontracting PO (Move 121/544)
Negative adjustment (Vendor Consumed Less but you Consumed
more in SAP and subsequently you did minus adjustment to component consumption
in SAP)
Debit
- Raw Material Inventory (S)
Credit
- Vendor Subcontracting Charges (H)
Subsequent Adjustment to Subcontracting PO (Move 121/543)
Positive adjustment (Vendor consumed more but you consumed
less in SAP and subsequently you added further component consumption in SAP)
Credit
- Raw Material Inventory (H)
Debit
- Vendor Subcontracting Charges (S)
Thanks
DD

How to ship back subcontracting materials from vendors to company .

Hi
Our client is delivering subcontracting materials to vendors using ME2O transaction .
She is asking me how can I ship back materials from vendors to company .
Example :
Shipped 236.C from company to vendor .
Now we need to ship back 236.K from vendor to company .
Could you brief me T codes to be used and entire process in step by step .
Thanks In Advance

hi jaya
check whether these points will help you
Item category: L
Order type: NB
In info record vendor should be maintained as subcontractor.
Vendor (Subcontractor) receives the components used to manufacture a finished product directly from your company or through third party.
Your company should place a purchase order for the finished product. In this manually you can enter the required individual components or it can be determined via the explosion of BOM (if exists).
Stock check at vendor level: ME2O
Company stock check: MMBE
GR for individual components through movement type: 501 or 561 (if with out PO or without reference).
GI to subcontracting vendor: through movement type 541.
GR from sub contracting vendor: through movement type: 101
Movement type 543 is displayed to cancel the material cost account.
If the subcontracting order has to be generated through materials planning,the special procurement key has to be set in MRP 2 screen.
regards
harish

IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
Marco

Hello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

Print quality problems on Fuji Xerox printers when printing from ArchiCAD and/or Preview.

Hello,
We experience major print quality problems when printing directly from Graphisoft's ArchiCAD, Nemetscheks Vectorworks and from Apple's Preview.
Basically we see various artefacts on our printed drawings, e.g. line thicknesses change and hatched patterns / fills are reproduced with patches where the lineweights and clours change completely... which is not acceptable.
This affects the following Fuji Xerox printer models on both 10.6.x and 10.7.x with the latest FJX PPDs:
ApeosPort C5540I
Xerox LF6605 MF
The workarounds for us are to either print PDFs from Adobe Acrobat Reader or via the rather dated Accxess Tools, besides that we prefer at times to print directly from a given Software it is also not always possible to generate a PDF and print it from Acrobat Reader... especially since the latest Adobe Reader update to its print dialogue makes printing from it extremely tedious - in fact we are considering going back to 9.5.2
Obviously, we have approached FJX Tech Support and are awaiting a reply - however we are disappointed that this is happening on relatively new equipment and wonder if anybody else has already found a solution.

The symptoms you mention could be related to the FJX engine and Acrobat is masking this fault. To test, you can create a Postscript file from the print dialog of ArchiCAD or VectorWorks and then download this to the Apeos RIP. If this produces the same result as when using the printer driver from the applications, then it would indicate that the engine is not capable of handling the data being sent to it from these applications.

Firefox was working on my new iMac but then, after switching on recently, won't connect to the web – whereas Safari has no problem.

===
Hi
I bought an iMac a week ago and installed Firefox via Safari. It worked fine for a while but, after a recently switching on, it won't connect to the web whereas Safari has no problems.
I've tried following the Firefox Help, looking into the iMac firewall, but still no luck.
I've no idea whether related or not but yesterday I had a system glitch where the iMac stated no wi-fi was installed and only connected via a physical lead to my house router. Also, there was no sound output via Safari. However, after booting up today all seems well – apart from Firefox still not working. It loads the start page but can't access the web.
I have Little Snitch running, and wonder if that's the culprit... but it's working fine with Safari, seemingly.
(Finally, how do I stop a dialogue box appearing on start-up saying that "To open “X” you need a Java runtime. Would you like to install one now?)
Any ideas anyone?
Cheers
Rob / Sheffield / UK
===

On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP. In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa. You may find the following Apple Support article helpful.

Subcontract Process with vendor supplied component

Hi,
We have a subcontracting process, when we send 3 components to the vendor, the vendor apply another component and return the semi finished to me.
I have a BOM of this semi finished Good that includes all the 4 components.
We sent the 3 components via mb1b.
We create a PO of the Semi Finished Good if we verified the components the 4 components are there.
When we try to receive via MIGO and click in verify The 3 itens that I send is OK ... But the item that is supplied by the vendor show me an error message that there is no stock.
What should I do to receive the component supplied by the vendor ?

Hello,
1. Create subcontracting with item category "L" and second line item in same PO enter with Item cateogroy means STD.
2. Item level of the Delivery address tab, tick SC Vendor and enter the same Vendor code there.
3.Go for GR for only for 2nd line item first. This stock will automatically picks 101 O Mvt, and u can view this stock as Vendor stock.
Check MMBE stock overview , Material is showing provided to Vendor at plant level.
4. Provide other 3 components with MB1B- 541 Mvt.
5. Go for second GR for finished Product.
4th Material shown as Material provided to Vendor in stock overview. if you want to get back that same material to your stock. reverse that stock use t code MB1B with help of Movement type 542.
Or else.
Through subsequnet settelement you can send the 4th Material to your subcontrcator MB04.
Regards
Mahesh Naik

Subcontracted Stock at Vendor has quality problem - must be blocked

Similar Messages

Maybe you are looking for