Subcontracting challan creation in current finacial year

hi sap expert,
when iam creating subcontracting challan it is giving error message no 8i374. For j_1i57fc i have created number range in 2009 year but it is taking 2008 year number range problem is that when iam creating the subcontracting challan it is taking number range from 2008 year and iam not able to do reconiliation. because according to system the excise year is 2008.
thanks
pramod

Hi,
Please note that Since the fiscal year is from April - March.
System will consider 2008 as the fiscal year for excise postings till you open new fiscal year.
Regards,

Similar Messages

Issue in Subcontract Challan Creation

Dear All,
We just started subcontractor challan process in sap for tracking the material supplied to vendor and finding the stock which will be laying at more than 180 days at vendor end.
The issue we found is while creating subcontract challan excise group and other details not stored, since we are doing testing and it would be resolve before implementing.
Regards,
Malini

Hi,
Please do the necessary settings if customization is missing then you need to do it. If your asking how to making the settings please sit with FICO consultant and Client Discuss it and come with your questions
Hope it is clear
Shiva
http://scn.sap.com/thread/1950603

Creation of subcontracting challan

Hi all,
I have done all the required customization settings,,,
procedure i followed is:
1. created two raw materials with material type ROH, - materials R1, R2
cretated a semifinished material with material type HALB- material S1
2.created a BOM for semifinished material S1 and assigned materials R1, R2 as components.
3. Created a PO with item category 'L', material S1, quantity 1, exploded BOM for assigning rawmaterials R1, R2.
4. Accessed t_code MB1B- movement type 541, with reference to purchase order for providing material to vendor.
5. Now I run t_code J1IF01 for creating subcontracting challan,,, there i had given material document, year, excise group, service group and executed the t_code,
and all the required fields in the transaction were filled and saved.
so finally system giving me this message:
Document 2007 10 created
problem is ,,, its not creating a number for subcontracting challan,,,
i had filled up all the excise data for the material,,,
someone can me help me out in this issue,urgent.
regards,
urendra

Hi Prasanna,
I had checked these number ranges viz. J_1IINTNUM, J_1IRG23A1,J_1IRG23A2, J_1I57FC all were maintained correctly,
System creating the subcontracting challan,, but it is not picking up the number range, I have selected the print immediately option and got the print with no subcontracting challan number...
as soon as I saved the Subcontracting challan, system gives this message
Document 2007, 50 created,,, here 2007 is the fiscal year, and 50 is the series group.
checked all the excise registers, excise group, material chapter id combination,,, everythings is ok,, kindly help me out in this issue.
regards,
urendra
[email protected]

Cancellation of Subcontracting challan of last fiscal year

Hi Masters
I have an issue in cancellation of a Subcontracting challan which is created in March 2009(fiscal year 2008).Our user forget to cancel the challan in last month(April 2009).When they try to cancel now(May 2008),it shows the following error
"Return date is lapsed and reversal of modvat credit is pending"
How to solve this?
-Mohan

Hi Masters
I have an issue in cancellation of a Subcontracting challan which is created in March 2009(fiscal year 2008).Our user forget to cancel the challan in last month(April 2009).When they try to cancel now(May 2008),it shows the following error
"Return date is lapsed and reversal of modvat credit is pending"
How to solve this?
-Mohan

MIGO with reference to Subcontracting challan

Dear Friends,
I have a couple of questions which u may be able to solve:-
1. In a MIGO for a subcontracting PO, i can select the option Refer subcontracting challan in the excise invoice tab. I wanted to know the purpose of this functionality. If i refer the subcontracting challan in the MIGO does it mean I dont have to reconcile the challan after MIGO.
2. When I refer the subcontracting challan in the GR and enter the challan no and year the system throws an error which says - Challan material is different from material document. i have checked the material document for the transfer posting made. But the material is the same in all the cases and flows from the PO itself. please help me out with this error.
Regards
Gurvinder

for point 2 do this
In spro --> taxon goods movemnt > indiac> business transaction --> subcontrcating --> maintain movement type grp
here miantain
0001 101 O
0001 122
0001 541
0001 544 O
0002 542
0002 543 O
Edited by: Kedar Kulkarni on Jan 27, 2010 7:53 PM
Edited by: Kedar Kulkarni on Jan 27, 2010 8:21 PM
Edited by: Kedar Kulkarni on Jan 27, 2010 8:26 PM

Sub contracting challan creation

HI,
ERROR:
when i gone to save the sub contracting challan system saying "Number range generation failure".
1)i maintained the number range in J1i9 for J_1i57fc component..
there is any other requirement for this..
thanks,
Mohan

go to SNRO
give the J_1I57FC give the serives group, then click intervals.
in that give
no: 01-it should start with 01 only if you give different it will give the error in creating.
year:2008
and give the form to TO number
while creating subcontracting challan use same series group.
regards
jrp

Challan creation screen(J1if01)

Hi,
if the user click the material document in the report it should take user to challan creation screen(J1if01)
i am capturing the values of Material Document & Material Document year but not capturing the Exercise Group.
below i am attaching the code.
       SELECT SINGLE *
       from J_1IEXGRPS
       into J_1IEXGRPS WHERE J_1IWERKS = wa_final-werks.
       exgroup = J_1IEXGRPS-J_1IEXCGRP.
       SET PARAMETER ID 'J2I' FIELD exgroup.
       SET PARAMETER ID 'MBN' FIELD WA_FINAL-MBLNR .
       SET PARAMETER ID 'MJA' FIELD WA_FINAL-MJAHR .
       CALL TRANSACTION 'J1IF01' AND SKIP FIRST SCREEN.

Hi,
What i understood with your question!!
Is it giving you error in that transaction of challan.
If it is a mandatory field without which you cannot move ahead than pass other group field
and check again.
Please specify the exact problem you are dealing with..
Regards,
Mayank

Problem while reconciling subcontracting challan

hi friends,
issue: while reconciling a challan im getting a msg saying that some qty of the material is not assigned fully.
but actually all the material was received.the only thing is in GR the mateerial was received in 2 batches so 2 line items. but while posting the GR itself i got a msg that po qty is deficit by the quantity i specified in the 2nd line item.but it was just warning . after posting the GR qty updation was for the whole 2 line items qty.
but what i understand is system takes the the 1st lineitem qty in GR, while reconciling the challan and says that the 2nd lineitem qty is still to be assigned.
any ideas to solve this pls
raja

hi, Raja just try reading this and do accordingly i think there should not be an error .
Once a subcontractor has processed your materials and returned them to you, you match the items in the challan against those that have been returned.
You have posted the goods receipt (or any other material document) for the returned goods.
1.From the SAP Easy Access screen, choose Indirect Taxes -.>Procurement -> Subcontracting -> Subcontracting Challans -> Reconcile Quantity.
2.Enter the following data:
a)In the Material Doc. and Mat. Doc. Year fields, enter the number of the goods receipt document and the year in which it was created.
b)In the table below, enter the challan numbers and the years in which they were created.
If the material document is a goods receipt document with movement type 101, you can enter the challans that were not captured when the goods receipt was posted. However, if all the relevant challans were entered during goods receipt, they need not be entered here
3.Choose Reconcile.
A new screen appears. At the top is the information about the goods receipt (or other document); at the bottom is the information from the challans that you have entered.
4.Specify which challans the materials in the goods receipt originated from:
a)If you have sent a subcontractor a number of different challans, all containing the same material, you can automatically specify that the materials should come from the oldest challans first, by choosing .
b)Otherwise, for each challan, enter manually the quantity of materials has been returned, and choose to refresh the display.
5.Once you have accounted for all the materials in the goods receipt, save the challan.
Result
The system changes the challans' status as follows:
1.)If you have accounted for all of the materials in a challan, the system sets its status to Fully Reconciled. In this case, you can complete the challan.
2.)If you have accounted for only some of the materials, it sets the status to Assigned. In this case, you must assign the remaining quantity of materials to another goods receipt later on.
3.)Scrap generated is assigned to a challan only if the percentage component scrap is specified in the bill of material for the parent material and this bill of material is assigned to the subcontracting purchase order.

Printing Subcontracting Challan

Hi,
How to print the subcontracting challan.
What are the settings for the same.
As i am not able to print some subcontracting challan , what could be the reason.
Regards,
ASHU

Hi,
During creation of 57F4 Challan in J1IF01, in Basic Data Tab Page, scroll down the screen, you will get a check box of "Print immediately" just activate it before saving, it will print the Subcontracting challan once you save it.
And to re-print the same go to J1IF11 and activate this indicator again and save.
Configuration Checks: -
SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes > Check whether Subcon Output Type - J1IF is maintained here.
Also check in M706 - For Output Type - J1IF should be in place.
Note: - There is no need of maintaining condition record for output type J1IF in MN21 and also no need to do any further configuration.

Referencing Subcontract Challan in MIGO (101)

Hello All
I have one Problem in Subcontract Challan,
When we make GR for subcontract Challan, We suppose take Ref in Excise invoice tab, Ref as Subcontract Challan.
But when we try make to reconcile the challan its giving as this challan allocated to GR
Not able to reconcile. we can delete the assignment while creating challan reconcilation but i dont want that.
and Even not able to Complete the challan giving error like Challan has to be reconciled first
PLease help me in this regards,
Thanks in advance
Abhinay Waikar
Edited by: Abhinay Waikar on Sep 9, 2009 9:44 AM

Thanks you very much for quick reply
But if enter the GR document number(101) and the year
Giving me error like document does not exist.
But GR doc exist.
Please reply
Abhinay
Edited by: Abhinay Waikar on Sep 9, 2009 10:50 AM
Edited by: Abhinay Waikar on Sep 9, 2009 11:33 AM

Subcontract Challan Reconciliation Problem

Dear Sir,
We are facing a probelm related to Subcontract Challan Reconciliation , problem scenario is as below :
a) We had created a Subcontract PO and transferred the relevant material to Vendor Stock against the PO reference .
b) During MIGO , by mistake we could not mention the Challan Number . So MIGO was done without Challan reference number .
As input material has already been received , so now we want to reconcile the challan (using Tcode J1IFQ) . Pl guide us as what steps need to be followed to address the problem .
With Thanks and Rgds
B Mittal

Hi,
There is no mandatry condition to ref challan while creating GR.
In J1IFQ , you can enter the Gr Number + Challan Number + Challan Year
With this process you will able to link the GR with challan.
Hope this is helpful
thanks

Subcontracting Challan Ref Error during GRN

Dear Friends ,
While entering GR for Subcontract Order I am getting this error :
Challan Material is Different from Material Document Message No. : 8I 572
We are in 4.6 C , the Relevant OSS note 817705 has already been applied.
The process I am following is :
1. Po : Item category L
2. MB1B Ok mov type :541
3. J1if01 Subcontracting challan: Ok challan number created :
4. MIGO for subcontract order : When I enter challan number for reference in pop-up , I am getting above error.
Can anyone please advise ?
Thks and Rgds/ Vinod
9867333819

Hi,
Along with note OSS note 817705, have you checked note 810083(This corrects the note 808541 released for the same problem. This note handles capture excise invoice for old challans with different fiscal year as well).
Just a final check, check in Tcode: J1ID,material & chapter id combination is maintained for the subcontracting material, with a check for subcontractor.
and in SPRO -- logistics general -- tax on goods movement - India - Business transactions -- subcontracting -- check Subcontracting Attributes and Maintain Movement Type Groups.
Hope this helps.
Thanks,
Viswanath

Subcontracting challan error

while creating subcontracting challan thru J1IF01
Please specify the number of line items for the challans.
Message no. 8I802
I am getting this error

Hi,
Please check the below links..
J1IF01 creation error
"Please specify number oflin items for the challans" in transaction j1ifo1
Hope it may helps you.
Kuber

Subcontracting Challan Error *showing error "The document doesn't exist"*

Dear Gurus,
When i run T-code j1ifq for quantity reconcilation for subcontracting challan .then i enter Mat. Doc(GRN document) and fiscle year 2009 and run F8 it's
showing error "The document doesn't exist" but it exist in system.How to resolve this problem pl provide needful method to solve this issue.
Thanks
Abhinav

hi,
have you typed the challan no or selected from the F4 list? please check that and the year of the challan document. then you should not have this error.

Excise Group in subcontracting challan

hi experts
while creating subcontracting challan nothing displayed in Excise Group
can u anybody explain how make excise group for singapore
thanks
ganesh

Hi,
First ensure following;
Configuration: -
- Go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction > Here maintain as following;
ETT Subtrn Typ DC ind Acct name
57FC            CR     PLABED
57FC            CR     RG23BED
57FC            CR     RG23ECS
57FC            DR     CLEAR
57FC 01         CR     PLABED
57FC 01         CR     RG23AT1
57FC 01         CR     RG23BED
57FC 01         CR     RG23ECS
57FC 01         DR     CLEAR
57NR            CR     CLEAR
57NR            CR     PLABED
57NR            CR     RG23BED
57NR            CR     RG23ECS
57NR            DR     REVERS
57NR 01         CR     CLEAR
57NR 01         CR     PLABED
57NR 01         CR     RG23BED
57NR 01         CR     RG23ECS
57NR 01         DR     REVERS
- And then go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction > Here do Account Determination for the above combination and Excise Group
Apart from above also do following configuration for Subcontracting;
- SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes
Here maintain following;
Excise Group         XX
Excise TT            57FC
Subtransaction Type 01
Subtran Type Text   57FC CHALLAN
Subc. Period        180
Rate-subcontracting
Mvt Grp Issues      0001
Mvt Grp Receipt     0002
Filter Non exise
EI Items            10
No. range no.       01
***. Val. /Exc Inv
Subcon Output Type J1IF
- SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups
Here maintain following
MVT. Grp. MvT S
0001      101 O
0001      541 O
0002      542
0002      542 O
0002      543 O
- J1I9 - maintain No range for object "J_1I57FC" for series group
Then follow the below process;
Subcontracting without Payment of Duty
- Creation of Subcontracting PO (ME21N)
- Transfer Posting of Components to Subcontractor (Mvmt Type - 541) (MB1B/ME2O/MIGO)
- Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01)
- Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and autoconsumption of components with 543 movement}
- Reconciliation of Subcontracting Challan (J1IFQ)
- Completion of Subcontracting Challan (J1IF13)
- Generation of Annexure IV (J1IFR)
Master Data
- MM01- Material Masters for Components and FG
- XK01 - Vendor Master (Subcontractor)
- CS01 - BOM for FG
- ME11 - Purchase Inforecord for Subcontracting

Subcontracting challan creation in current finacial year

Similar Messages

Maybe you are looking for