Subcontracting challan print preview problems
Hello sir,
i am having a problem when i create subcontracting challan from j1if01 for a vendor 'S' item 'x'.
material details for 'X' is shown for vendor 'S' in challan print preview.
again when i crete second challan from j1if01 for the same vendor 'S' item 'y'
material details for 'y' is not shown for the same vendor 'S' in challan print preview.
i have maintained chapter id for both material.
regards
sanjay
Hi Sanjay,
Your problem is not clear. IS it that you have two materials in BOM and you are transferring these two materials to the vendor but only one item is printing and not the second one.
Pls check your settings under logistics General> Tax on goods movement>India--> Subcontracting attributes in that EI items. What is the number selected there. If it is one it will print different challan per item.
Regards
Sangeeta
Similar Messages
-
Subcontracting challan Print Out Perview
Hello Everybody,
I want to take print out of subcontracting challan.For that while creating subcontracting challan i am selecting print immediately option. What system is doing while saving this challan system creats spool request automatically. But my requirement is i just want to preview subcontracting challan print out.How can i achieve this.
Regards
VivekHi
Please that for the message output you have requested processing as 4- send immediately and in the communciation you have ticked print immed.
Sunny -
Delivery challan print preview for transaction j1if01 problem
hi , i have problem with print preview of delivery challan. after creating it from j1if01 im unable to get a print preview of it
as i dont find any tab or button for print preview .
plz guide me how can i get an output . also plz give form name for it . thanks !!In u2022 SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes maintain the Output type. Other attributes are as under fyi
Excise Group XX
Excise TT 57FC
Subtransaction Type 01
Subtran Type Text 57FC CHALLAN
Subc. Period 180
Rate-subcontracting
Mvt Grp Issues 0001
Mvt Grp Receipt 0002
Filter Non exise X
EI Items 10
No. range no. 01
***. Val. /Exc Inv
Subcon Output Type J1IF -
Crystal Reports print preview problem
Hello
The problem is that print preview of a report using crystal Report dotnet Print Preview is making u201Cblank signsu201D inside words. The blank signs occurs near Swedish special signs like u201Cåu201D, u201Cäu201D and u201Cöu201D. Also near u201C.u201D (dot). Maybe there are more signs making this problem.
The problem occurs for those who have .NetRuntime, or a full installation of Crystal Reports
The problem started when we installed Crystal Reports 12. In earlier versions we had no problem with this.
It feels like Crystal Report have some bug in the u201Ctext rendering engineu201D. This is obviously a problem when a customer previews a text before printing it. This preview should look like the printout. Even if the room between two letters not is a space, there still is a room that is interpreted as a space by a human.
However, if we zoom to larger % (200%) the preivew is matching the report.
Regards
KamleshMake sure you have SP 2:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
with FP 2.5 on top:
https://smpdl.sap-ag.de/~sapidp/012002523100002975192010E/cr2008fp25.exe
If the issue persists, since it is in the CR designer, post to the CR design forum:
SAP Crystal Reports
You need to resolve this in the designer, before trying to resolve it in a .NET application.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Credit memo print preview problem
Hi Friends,
The present process is return sales , in which return sales order created with reference to sales order, Credit memo request created and Credit memo also created.But the problem is not getting print preview.Error message is Excise invoice corresponding to the document type is not found.
We are generating Excise invoice Automatically, Is there any effect of this on the present issue.Please give some hint.
Thanks
ChetanHi,
See normally we have excise invoice creation automatic when invoice is saved. In such cases we have a check in the print program of invoice, which prevents its printing if excise invoice is not created.
In case of credit memo, you might not be creating any excise invoice, but the print program attached might be preventing its printing also.
Check that such a check is given in print program for credit memo output, if yes you may have to remove it.
Hope this helps you.
Regards,
Dhananjay -
Purchase order Print preview Problem in ME23N
Hi all,
We are trying to see print preview of purchase order in ME23N, but, when we press print preview button another window named "SAPLPD" is poping up. The pop-up window looks like command propmt window and contains lines like
"(11:25:54 AM) Icon DLL loaded.
(11:25:54 AM)
(11:25:54 AM) Network Communication via SAP-NiLib
(11:25:54 AM) Hostname: L04WSChe0300
(11:25:54 AM) IP Address: 10.87.7.11
(11:25:54 AM)
(11:25:54 AM) SAPLPD Version 6.28 for Windows/NT (OPT) is listening
(11:25:54 AM) OS-Info: version = 5.1, build = 0/2600, text = Service Pack 2
(11:25:54 AM) Copyright © 1992-2001 SAP AG
(11:25:54 AM)
(11:26:04 AM)
(11:26:04 AM) Receive job for printer __DEFAULT (Berkeley LPD protocol / RFC1179)
(11:26:04 AM) send_status called
(11:26:05 AM) send_status called
(11:26:05 AM) send_status called
(11:26:07 AM) send_status called
(11:26:07 AM) send_status called
(11:26:07 AM) Job 000jgjJp.DEV for user DEV2 queued.
(11:26:07 AM) Start printing job 000jgjJp.DEV on printer MICROSOFT OFFICE DOCUMENT IMAGE WRITER
(11:26:13 AM) Error: Unable to start print job, Windows rc = -2, Error = Overlapped I/O operation is in progress.
(11:26:13 AM) Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
How can I fix this problem and see print preview of purchase order in ME23N.
Please help me!
Thanks,
Rajanhi,
DATA: w_compop TYPE ssfcompop.
w_compop-tdimmed = ' '. "Print Immediately control parameter should be empty..
Then only print preview pop-up will come..
then call your smartform like this..
CALL FUNCTION fnam
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
TABLES
it_vbdkr = it_tvbdkr[]
it_vbdpr = tvbdpr[]
it_zglentitycode = it_zglentitycode[].
regards
vijay -
Smart forms Print preview problem
Hi
Experts,
I am working in CRM2007. I am creating number of different type Smart forms for our client requirement. All Smart Forms working fine in WEB GUI. In Web GUI there have two buttons; one is print buttons and another one is Print Preview buttons. When we press print buttons it is directly go to printer for printing service order or service invoice or sales order or sales invoice whatever user is selected. Means working fine print buttons. And in case when we press print preview button it is open selected forms in PDF format; it is also work fine in our desire. But problem is here PDF format front size; which is very small. And after looking the PDF format if we select for print out of this PDF form; the print out orientation is Landscape and front size is very small. Now my question to all of experts u2026u2026u2026.How I change PDF front size and orientation? u2026u2026u2026u2026u2026u2026any type of BSP Enhancement or functional setting is required? Please Experts help meu2026u2026u2026u2026u2026u2026u2026u2026..
Regards
Tarapada D.please CRM Experts give me some answer!!!!!!!!!!!!!!!
-
Report 10g print preview problem
hi,
i use report 10g (HTMLCSS)
when send to printer i have problems as:
1- page stream should not show to print preview
2- page sizing changed in print preview
but when send directly to printer without page stream i have not problem with page sizing and margin just i have problem with page number i cant set page number as ( from page to page)
please help me.
thanksWhile printing report from the HTML page you can change the margin and header/footer setting by clicking or File>Page Setup>Margin & Header/Footer.
Just edit those property upon your requirement and then print report.
-Ammad -
Adobe PDF Form print preview problem
Hi All,
I am new to Adobe PDF form. I have created one small form using the t-code SFP.
I am testing this form directly from the T-code SFP.
When i use the print preview to see the fom output it is givine me below exception.
"Device type unsuitable for ADS documents"
I am using the printer LOCL.
Can you please help me to rectify this problem.
I am not able to undestand why i am getting this error as i am new to ADOBE form.
Thanks in advance
SachinHi
check this [LINK|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/other-topics/how%20to%20check%20if%20the%20adobe%20document%20service%20is%20running%20correctly.pdf] to check if ADS is working or not.
Thanks
Viquar Iqbal -
Sapscript's print preview problem
Hi everybody!
My problem is in sapscript's print preview.
When I call the transaction directly the print preview is ok. But when I call that same transaction through a CALL TRANSACTION command from others reports, the print preview is showed as a simple report output, like it's printed with WRITE commands.
Has anyone got an idea about this?
Thanks,
RaphaelHi Curtis!
Yes, I'd found the answer.
To solve that, when use the CALL TRANSACTION command, you have to set the parameter CTU_PARAMS this way:
CTU_PARAMS-NOBINPT = 'X'.
Doing that, the system knows that it isn't a batch procedure.
Regards,
Raphael -
I'm using PSE 8 with Vista home version. When I ask for a print preview I get a blank page. Any ideas what I might do? Thanks jft43
Which file type are you face this problem with? It works fine for me. Make sure that your thumb is selected
in left pane of the print dialog and the corrosponding preview should be shown accordingly.
~V -
Subcontracting Challan printing after reconciliation (status assigned)
Hi,
My requirement is to reprint the subcontracting challan after reconciliation (status assigned).
To reprint the challan we use the tcode j1if11 and tick print immediately. Spool is generated and we are taking printout.
But since the challan is reconciled system is not allowing to enter in tcode j1if11.
Please suggest how to get print in this case.
RegardsHi,
Thanks for the reply.
But this is business requirement in case if the challan need to be resend to vendor if the original copy is lost or business reporting is reqd or any other case.
Please suggest.................. -
Text in Subcontracting Challan Print Out
Dear Experts,
We have a problem, when we make subcontracting Challan thru J1IF01, and maintain text in option, subcontracting challan, subcontracting norms, shipping instructions, nature of processing etc. But it is not reflecing in the challan printout (J1IF11).
Kindly suggest what to do so that the text details will appear on the printout.
Full points will rewarded on helping answers.
Thanks in advance.
GR.Hi,
The same problem I had faced in the past.
I had done it on trial & error basis.(I don't remember exactly)
Goto TEXT tab, check all the options in that tab, any one frm it will work for you.
Try it.
Regards,
Piyush -
Smartform All pages in one print preview problem
Hi
I am displaying the employee data in ALV with checkbox selection.. i put two user defined buttons like print and print preview. when user clicks on print button, smartform will call for very employee in loop and print it employee wise. But my problem is when user clicks on print preview by selecting multiple checkboxes , I need all pages(employee wise like page1,2,3..) in one print preview. I done but for every employee,i have to press the BACK button. But I need all pages in one preview. I'm pasting my code here. Can anyone suggest??
WHEN 'PREVIEW'.
w_cparam-no_dialog = 'X'.
w_cparam-preview = 'X'.
w_cparam-getotf = ' '.
w_outoptions-tddest = 'LOCL'.
w_outoptions-tdnoprev = ' '.
w_outoptions-tdimmed = 'X'.
* to reflect the data changed into internal table
IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
CALL METHOD ref_grid->check_changed_data.
ENDIF.
loop at i_data into wa_data where SEL = 'X'.
MOVE-CORRESPONDING WA_DATA TO WA_PRINT.
APPEND WA_PRINT TO I_PRINT.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZHRF1_PTAR1001'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
* EXCEPTIONS
* NO_FORM = 1
* NO_FUNCTION_MODULE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FM_NAME
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = W_CPARAM
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = W_OUTOPTIONS
USER_SETTINGS = 'X'
FR_DATE = PN-BEGDA
TO_DATE = PN-ENDDA
IMPORTING
* DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = T_OTF_FROM_FM
* JOB_OUTPUT_OPTIONS =
TABLES
ITAB = I_PRINT
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: WA_DATA,WA_PRINT.
CLEAR: I_PRINT.
ENDLOOP.Hi friend sure.
You need to increment the index only at the loop no where else and the variable for holding the index value is global.
If you create before the read every time it gets trigerred.
After each loop you assign the sy-tabix value to that variable.
Just like this ,
v_index = sy-tabix.
Then at the window just read the table as shown
READ TABLE t_chq INTO x_chq INDEX v_index.
This will do friend.
I will update the flow of my code here, then you many understand it much clear.
Page1
Main window (below page1)
Loop (inside Main win)
program lines. code : v_index = sy-tabix. v_lines = lines( t_chq ). (inside loop)
Condition (inside loop)
True
check the v_index < v_lines if true break page, for page break create a command and do it (Inside true condition)
false
blank.
Secondary window (below page1)
program line (inside sec wind)
Inside program lines the code is READ TABLE t_chq INTO x_chq INDEX v_index. (inside sec wind)
Secondary window2 (below page1)
program line (inside sec wind2)
Inside program lines some other code. (inside sec wind2)
This is my logic try like this friend.
I think for other records its coming fine because since it is an local variable its getting updated some where and also showing 1 bec its always initializing.
Try this you will get if any issues please revert back to me
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 6, 2012 11:04 AM
Edited by: srihari.kumar on Jan 6, 2012 11:05 AM -
When I select 'Print Preview', the Preview screen appears, but the document is blank. All pages print properly, however. This applies to all the apps I use mostly (maybe more) such as Word, Excel and Internet Explorer.
Spent 30 minutes with Chat, going through all the options, default and otherwise, before they hung up on me. No joy.
The last thing I want to hear is un/reinstall. That seems to be the usual solution to my problems. Hope this one is different.
Thx for any suggestions
HazQuote: When I select 'Print Preview', the Preview screen appears, but the document is blank. All pages print properly, however. This applies to all the apps I use mostly (maybe more) such as Word, Excel and Internet Explorer.
Yes, I get the same problem since installing Windows 7! If I wait long enough, the document is eventually displayed in the Print Preview screen!
But the question is why is this happening in Windows 7, when it did not happen in XP or Vista? I believe the answer is that there is still a fault in the OS that has not been corrected. The fact seems to be that we have all purchased an OS that was not fully ready for public release! And that is just not good enough MICROSOFT!
Maybe you are looking for
-
Problem with saving Parent - Child View Objects in ADF 11g.
Hi Every one, I have a requirment, something like I will be displaying some data on my jsff screen based on one Transient View Object. Whenever user clicks on Save button, I have to do following steps in my AMImpl. -> Preapre dynamically Parent View
-
i want to kno what the company plans to do to increase their chances of me signing another 2yr. i dont want the "sale price" with new 2yr due to the fact that im a returning customer intreristed in purchasing a second contract. i also dont want to ha
-
New OS x Maverick won't allow iPhone and iMovie updates. Why?
I have just downloaded OS X Maverick and now can't update or access my iphoto or imovie. why and what can I do about it?
-
As soon as I run Photoshop 2014 for the first time, it bombs without error code but saying that it has been forwarded to tech support. I have Photoshop CS6 installed as well as Photoshop CC. Now even CC doesn't connect to photoshop from Bridge
-
I have been getting "unsupported file format" messages from Aperture using ".CR2' files from my Canon EOS 350D. The Apple Aperture web site shows support for the "Digital Rebel XT" which is the US name for the same camera. Why does Aperture not suppo