Subcontracting error - MIGO posting
Dear SAP Gurus,
I have raised the sub contract PO and have posted subcontracting challan using J1ifo1 for which i have configured CIN setting for this. while posting J1IF01 i was getting error "excise modvat account not defined for 57FC and for P2 excise group which has been resolved. I have configured the setting for 57FC, 57CM and 57 NR with ETT and Sub Trxn type and assgined the same in specify the excise trnx and G/l accouts.
Now I want to post goods receipt from subcontract using MIGO, system is giving the error -* "excise modvat account not defined for GRPO and for P2 excise group"*
I am executing the sub contracting without payment of excise duty secenario.
Also, I have maintained all the G/L account setting for GRPO such as
1) GRPO CR Cenvat clearning account
2) GRPO DR Cdenvat onhold account
3) GRPO DR RG23 AED account
4) GRPO DR RG23 SED account
5) GRPO DR RG23 BED account.
Please suggest any other accounts need to be maintained in ETT, subtransaction type, subcontracting sattributes and G/L account.
REgards,
Prashanth
Yes, I have maintained,
1) Subtransaction type 01.
2) Subcontracting attributes with GRPO for cenvat clearning a/c, cenvat hold , RG23D AED, SED, BED.
3) Maintained specify excise transaction per excise invoice for GRPO.
4) In specify G/l a/c for excise tranasction - for the combination of ETT, SType, CC and INT - I have maintained Modvat clearing a/c
Same error...
Similar Messages
-
Hi Experts,
In T code oby6 I have activated purchase account procesing and assigned G/L account in T code OBYC to EIN one P & L account. While posting MIGO I am getting a error that Field Text is a required field for G/L account 1000 49820101 Please explain me how to eliminate this error.
Thank you
Sap MMHi,
In this error itself you can see the option to go for changes in to Config by clicking on Proceed.
In your case the field selection is not same for movement type and GL account.Please make the text field optional for field status group and for the movement type also.
Regards,
Manish -
MIGO error while posting..!!!
H Alli,
Getting below error while posting in MIGO:
"Account 413501 requires an assignment to a CO object"
Regards,
AmitHi
Check whether profit centre is assigned to your material at sales general plant data
If not , then give profit centre and create a fresh cycle and see
Regards
Raja -
Account Determination error during MIGO Posting
Dear All,
Kindly help resolve error duirng MIGO posting "ACCOUNT DETERMINATION FOR ENTRY GBB____ZOB TF01 not possible". This is Message no. M8 147.
The error happens once the transaction is being saved.
Hoping for your positive response.
Thanks and regards,
chingHi,
Goto OBYC Transaction.
Select the Procedure as ' GBB" and enter the Chart of Accounts ( for Your Company code)
Enter the Valuation modifier as assigned to others.
Enter the General modifier as ZOB
Enter the Valuation class ( with respect ROH/SFG others)
Enter the Debit/ Credit G/L account
save then proceed your transaction MIGO.
rgds
Chidanand -
Hi Friends ,
Following error i am geting in MIGO posting for assets....please help
Authorization missing for Company code 1000 Asset class IN4200
Message no. AA048
Diagnosis
Authorization for Company code 1000 with Asset class IN4200 is missing.
System Response
You cannot create, change or post data in this object.
Procedure
If you want to create or change, use an object for which you have authorization. The display transaction will indicate your missing authorization in the initial request screen.
If you need the authorization for this object, contact your Systems SpecialistHie Balegar.
How did you resolve your error? My client is experiencing the same error AA048 but using t-code SU53 reports missing authorisations which are maintained, have even went further to re-transport the role to no avail. Can you assist with possible solution. -
Error while posting batch managed stock in 107 movement type?
Hi All,
Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
regards,
SanjanaHi,
spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
107 SGTXT
107 WEMPF
Check here 107 mvt type there or not if not then put.
101 CUSTNAME
101 GRUND
101 SGTXT
101 WEMPF
102 SGTXT
102 WEMPF
103 SGTXT
103 WEMPF
104 SGTXT
104 WEMPF
105 SGTXT
105 WEMPF
106 SGTXT
106 WEMPF
107 SGTXT
107 WEMPF
108 SGTXT
108 WEMPF
109 SGTXT
109 WEMPF
110 SGTXT
110 WEMPF
Regards
Rakesh -
MIGO - Posted lines can appear more than once
Hi Gurus,
when posting inb. dlvs. with MIGO, sometimes we get some of the lines posted multiple times, I guess we've understood the reason why but we're still looking for a solution (instead of saying to the user "leave the transaction and get back in later..."):
The "multiplication" of lines happens when MIGO is executed several consecutive times and at least one material/batch is still being processed by the previous MIGO posting:
1) start MIGO, key in inb. dlv. number, execute Post
2) perform the same as # 1 with a new inb. dlv. number and execute Post
if at least one of the materials/batch from inb. dlv. # 1 is also contained within inb. dlv. # 2, due to slow performance, you could get the following error message: "Batch xy of material abc is already locked by asdfg"; MIGO screen will remain empty, field to key in inb. dlv. number will be cleared.
At this point, if the user will type in (again) the same inbound delivery number + F8, assuming the lock had been removed in the meantime, the program will "double" the lines (or add the lines up to the one the program reached before to raise the error message).
Sounds like a program bug, error message M3682 should stop the program or clear the buffers, otherwise there's no way the use can know something was read and stored "behind the scenes" and is going to be used as soon as the lock will disappear.
Any help/suggestion will be really appreciated.
EnricoPlease, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window. -
Error in posting purchase order delivery
Hi
I got an error while posting purchase order delivery through Tcode- MIGO
This is the Error Message:
Posting only possible in 2009/04 and 2009/03 in company code XXXX
I checked everything Fiscal year variant,Posting period variant,etc.
And in Tcode- OMSY.
Let me know as early as possible how to solve this issue.
Thanks and Regards,
Deepthi.Hi Deepthi,
You need to understand that posting periods 3 and 4 does not necessarily mean march and april in SAP.
Check your fiscal year variant for the months which correspond to periods 3 and 4. Then you will be able to solve your problem by yourself.
Open and close periods in FI - OB52
Close periods and open new periods in MM Side - MMPV
Hope this helps you....
Regards,
Sreekanth.... -
Hi all,
we are facing an error while created gr in migo.error is posting in this company is closed.
we have checked and closed period for 01/2010 in mmpv.what might be the issue.
regards
krishnaDear,
Posting period might set from April TO March so need to open Period 09/2009 to 10/2009 or ur FI period is closed
so need to open accordingly in OB52.
Regards
AJIT K SINGH -
Error while posting a write up for asset belonging to affiliated company
Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
PragyaHi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya -
Error while posting depot excise invoice
Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tusharhello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni -
Tax code error while posting Planned delivery costs in Import Scenario
Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
DurgaIs you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan -
Error while posting the parked document in ECC 6.0
Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks. -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu -
Error while posting asset aquisition
Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanujaHi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS
Maybe you are looking for
-
HT204053 I have an apple id but how do I get one for icloud?
I am trying to use photo stream and have an apple id but it just tells me it doesn't work for icloud, but doens't say how to get one.
-
/hi my ipad screen is not responding. Nothing appears. It seems to turn on but nothing appears on screen. maybe my niece of # years old that played with it entered too many tomes wrong passcode. Anyway, how can I restaure it? The itunes doesn't recog
-
Does SharePoint foundation supports Reporting services
Does user will be able to create Adhoc reporting services in SharePoint foundation 2010, our requirement is the SMDL created bit BIDS(Business Intelligence Development Studio) would be uploaded into the business intelligence site and user uses these
-
Como desbloquear pop en mi iPad y como instalar flash
-
Sizing an Applet, Need help.
The height parameter of the applet tag can be entered either in terms of number of pixels or % of the browser height. Is there a way to specify the height as the maximum of two: a fixed size, say, 500 pixels, and a fixed percent, say, 70%, of the bro