Subcontracting with mat type UNBW

hi
system ask me for the gl acct in one scenario and i want to know why
scenario is as follows
this is make to order scenario
using sales order with job work money
now i am giving the mat for sub subcontracting  with out price (free)
mat is unbw fin and raw
acct assignment E and item cat L
system now asks me for the gl account
now my question is why sys asks for the gl account as its a free order

Hi,
If you are sending the material for subcontracting with account assignment "E" , G/L account is mandatory even though it is free goods  issue. In Automatic Accoutn determination(AAD) system SAP std configuration.
Please give the G/L account and proceed.
(or  )
please raise a service order
G.Ganesh Kumar

Similar Messages

  • Repair / Subcontracting with non standard mov types.

    Dear friends,
    I have copied mov type 541 to 941 , 542 to 942 and 543 to 943.
    When I post trhu MB1B .. with mov.type 941 , and receive it via MIGO with mov type 101 the system is determining the mov type 543 and not the 943 as we do need.
    Does anyone knows if I got to change this behavior ?
    This scenario is to use the same functionality of Subcontracting to repair materials. Other Ideas ?
    best regards,
    Ale

    Hi,
    Please go to the transaction code- ' OPKA ' and in the 'Parts Provided' column of the table replace 543 with 943 movement type for the movement type 101.Save your data and try again the process.
    Please note that, the standard Sub-contracting procedure (541-101(543)) will be impacted with this change.
    Regards,
    Narayana.

  • Mat type setting for UNBW and NLAG

    In std SAP system, For material types UNBW (non-valuated) there is no value update so Accounting screen is not required.But account category reference is assigned. Y it is required.
    For NLAG( non-stock), both Qty and value updated are not required, but for this material Accounting screen is defined but account cat reference is not assigned.
    Plz whether the above settings are std settings.
    My clarification is whn value updated is not required, materia wont need accounting secreen and hence no a/c cat ref is requried.( for UNBW) so we need to define accounting screen for this mat type.
    Similarly for NLAG, as value update is not required, no accounting screen is reaquired for mat master.
    plz clarify

    hi,
    In addition to the Mr. Pankaj's reply...
    You would have noticed that the gr also become the non-valuated when there are n number of the g/l accounts...
    The same is the reason here also...as there is no account updated in the UNBW....but on the other hand, there could be qty update....for which the acocunt asignment wuld be required, so that the material may be used as a consumable material...
    Hope its clear....
    Regards
    Priyanka.P

  • MM Transfer material UNBW with movement types

    Dear friends !
    I would like to know if is it possible to transfer material UNBW thru MM ?
    Could I use movement type 303 - 305  or 641 and 101 ?
    best regards
    Ale

    HI,
    You can use any movement type UNBW. For UNBW account assignment is mandatory so when you post UNBW material reciept it will directly post to comsumption account not to stock account.
    Regards,
    Chetan.

  • Subcontracting with slaes order

    hi i want to know
    how can we do the subcontracting with sales order
    i got a process using 311 e movemnt when i search on SDN
    plz let me know if this process is correct how can i  have subcon challan
    Subcontracting scenario(Sale Order wise)
    Subcontracting For Sales order.
    Subcontract Account assigned PO
    how can i create storage loc as vendor
    plz help
    regards
    raj

    Hi,
    Subcontracting for Project Stock: -
    Purpose: - Subcontracting is also possible in conjunction with Project stocks. The subcontracting orders are account-assigned to a Project. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the Project stock the time of the goods receipt. The material manufactured is also posted to the Project stock.
    The cost of subcontracting is then debited to the Project.
    Since the components are not transferred to the "stock of material provided to vendor", it is recommended that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the Project stocks.
    Features: -
    Withdrawal from Stock of Mat. Provided for Project: -
    For components that are managed in Project stock, you can define whether the components are to be withdrawn directly from each Project or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
    You can maintain this indicator in the following places:
    In the MRP view of the material master record (MRP 4)
    In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
    Configuring the explosion types has priority over the configuration in Inventory Management.
    If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from Project stock.
    Regarding Subcontracting Challan: -
    Go to OMJJ, select the field "movement type" and press enter
    Enter movement type "311" and double click on "Field selection (Enjoy)" under Dialog Structure on left side.
    here "New Entries" and add field "LIFNR" (Vendor)
    Now in MIGO, at the time of transfer posting of components using movement type "311 Q", specify the vendor code of the Subcontracting PO (i.e. Subcontractor)
    Now create Subcontracting Challan in J1IF01 for material document of 311 Q movement type.
    Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0001", Movement Type "311 Q" should be maintained.
    Then do GR against PO and refer the Subcontracting Challan here.
    And then do reconciliation in J1IFQ for the GR Document against Subcontracting Challan.
    Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 Q" should be maintained.
    Follow the below mentioned process;
    Process Steps: -
    1. OX09 - Create Storage Location as "9999" for Subcontractor Location
    2. MB1B - Do Transfer Posting of material from RM Warehouse to this Storage Location via movement type "311 Q" (Instead of doing 541)
    3. Now go to J1IF01 - here use material document of movement type "311 Q" and create Subcontracting challan. (If required)
    Prerequisite: - In SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > Here for Movement Type Group "0001" (For issues), maintain movement type "311 Q" also along with 541.
    Rest all, refer subcontracting challan during GR and then reconciliation and completion, etc... will be same as usual.
    Note: - At the time of GR, consume components from storage location "9999" (for 543 movement type)

  • MB1B error with Movement type - 411 / E

    Hello MM Sapperu2019s,
    I have an issue in transaction MB1B where I need to move the sale order stock to unrestricted with movement type 411 /e I am getting the error,
    Dlv. type (dlv. catgry OD for mat. XXXX and BWART 411) cannot be determined
    Message to Moderator,
    I believe this issue has been discussed earlier in SDN but not with similar to my case. Hence not to close my thread as it has been disused earlier.
    I also refer the below links but couldnu2019t able to find the detailed root cause for my issue.
    Error in MB1B posting (Issue is related to 411/Q)
    Delivery Type cannot be determined in subcontracting (Issue related to Subcontracting)
    Also I have referred the OSS notes and my observation are as below,
    1238654 which has been mentioned by Jurgen and observe this is not relevant to my case as we are using the standard Ware house.
    540185 which has mentioned by kuberk and identified table T156Q is perfectly maintained.
    Hence please help me with your valuble inputs to identify the detailed rootcause for my issue.
    Br
    Kumar.S

    Dear Kumar,
    Can you tell me the exact error number like VF569........ please.
    So, I'll able to tell you exactly......
    Thanks
    Farrukh khan

  • Calculation for subcontracting item of type N (non stock) as it for type L(Stock)

    Hi Gurus,
    I have a Requirement for calculating the cost for Subcontracting  Non stock items N as it is getting calculated in standard functionality for subcontracting items of Type L.
    This will be done in CK11n ( used to calculate the standard cost estimate of the product) for header as well as component materials.
    please suggest the user exit or Badi where i can change.
    Please refer the below logic-
    BOM for the material 2000500 as Header and 1LPL0835298AB as a component and this component has an assembly with 7008508 as a component and this component is an Sub contracted item and this has an assembly with component 1LBA182151-3.
    Price calculation for the material 7008508 (Item Category as N). Since this is sub contracted item the price will picked from field EINE-NETPR.
    In EINA, pass the material (MATNR=7008508) to fetch the list of info records (INFNR) created for that material.
    Then it has to input those info records to EINE table along with Purchasing organization (EINE-EKORG=PT02).
    From the output of EINE table, it should compare the price (EINE-NETPR) of the PIR and should take the least price from those PIR`s.
    If the currency is other than PLN, then it should be converted to PLN based on conversion charges.
    For Material (MATNR=1LBA182151-3), it should pass the material number to table MBEW along with valuation area (BWKEY = WERKS).
    From the output, it should check the Price control (VPRSV) ‘V’ or ‘S’
    If ‘V’ the price will be picked from the field “VERPR”
    If ‘S’ the price will be picked from the field “STPRS”
    Also from the output, it should check the Price unit (PEINH) ‘1’ or other than ‘1’. If it is other than ‘1’ it should divide the VERPR or STPRS by PEINH. Then this is the price of the Material “1LBA182151-3”.
    The material (MATNR=1LBA182151-3) should be passed to table “MARA” and will take the Base unit of measure from that table “MEINS”.
    Br,
    Surya

    Hi Surya,
    Please put breakpoints in any of the below BADI's and check if any of them will trigger for your
    requirement:
    VALUATION_CK                            BAdI for Valuation in Product Costing
    CK_KALAMATCON2_CI                       BAdI for CI Fields for Table KALAMATCON2
    COSTINGRUN_CK                           Edit Costing Run
    COST_APPORTION_CK                       Maint Apportionment Structure Joint Production: Dist Rules
    CO_PROD_COSTING_CK                      Cost Management for Joint Products (Costing, Target Costs)
    DATA_EXTENSION_CK                       For Data Enrichment in Product Costing
    DYNPRO_EXTENSION_CK                     BAdI for Interface Enhancement in Costing
    ORDER_COSTING_CK                        Enables Header Data Changes in Preliminary Order Costing
    QUANTITY_STRUCT_CK                      Enables Quantity/Structure Changes in Costing
    SUR_STOCK_TRANSF_CK                     Overhead on Materials with Stock Transfer Between Plants
    Thanks
    Sri

  • Post a good issue against an outbound delivery with movement type 601 K

    Hello,
    according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
    Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
    To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
    In particular I've tried in two different ways:
    - setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
    - to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
    Can you suggest me how the system has to be setup in order to cover my requirements?
    Thanks in advance,
    Alessandro

    Hi,
    Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master.  Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you.

  • Goods Receipt through internal order with movement type 262

    Dear Friends,
    some of our users  making entries like the following
    1. created Internal Order 
    2. Creating Reservation with movement type 262 ( which not issued material through movemnt type 261)
    3. Stock  updated
    i just want to confirm, we not issued like X  material,  even stock not available,  we can make entries like the above, To receive X material from Internal order/ subcontractor using movement type 262.
    kindly advice please  if it is wrong then tell me the process.
    Regards,
    Rajesh G

    HI,
    if we receive material from subcontractor what process we can do...
    can you explain your issue exactly what problem you have at your end .
    I think you want to take subcontracting material inside which is not in sap system now,it may finished material or it may component.If you don't want to show this material as at vendor now
    then you can try movement type 501  or through physical inventory  t-code MI10
    Regards
    Kailas Ugale

  • Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

    Hi,
    I am working with MTO scenario.
    I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
    However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
    Below steps are being follow:
    Scenario is MTO ( special stock subcontracting)
    1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
    2. RM code - 61, available stock 100 TO & batch no.0000000127
    3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
    5. Item Data details tabs are blank.---This is the issue / error.
    Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
    Please have a look on attachment for SAP screen issue.
    Regards
    Mohit Jaiswal

    Hi Mohit ,
    please check below link , you need to perform steps as given
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
    also see the sales order subcontracting using the business addon
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

  • Issue material for Subcontracting with reference to PO for multiple batches

    Hi All,
    Issue: I want to issue 5-6 materials with reference to PO which have multiple batches. How can that be done?
    Thus, if my raw material in stock are:
    mat X   Batch 1    50 nos
    mat X   Batch 2    40 nos
    mat X   Batch 3     30 nos
    mat Y Batch 6    10 nos
    mat Y Batch 7    10 nos
    mat Y Batch 8    10 nos
    mat Y Batch 9    10 nos
    i f for semi finished material A, sub contractor order 45000009 is created, where raw material required are:
    Mat X      100 nos
    Mat Y      30 nos
    then how can I issue the raw materials wrt PO, and select multiple batches at the same time, without user entering the material again and again.
    I have gone through the SDN multiple times to see the probable solution exists, but I have not received any solution.
    Regards,
    Ankush

    DO MB1B transaction, with Movement type 541,
    Enter the material with different Batches for required qty. as different line items.
    e.g
    line item 1 : mat X Batch 1 50 nos
    line item 2 :  mat X Batch 2 40 nos
    line item 3 :  mat X Batch 3 10 nos
    line item 4: mat Y Batch 6 10 nos
    line item 5 :  mat Y Batch 7 10 nos
    line item 6 :  mat Y Batch 8 10 nos
    Edited by: sudhansu satapathy on Oct 21, 2011 7:29 PM

  • REVERESE SUBCONTRACTING WITH EXCISE DUTY

    Job Work done by Client with excise duty
    Business Process,
                                 Raw material got from the Customer & it is processed by Client finished goods are made the same will be delivered to the Customer with excise duty.
    Details:
    1     Sales order will be created with the details of raw materials that customer agreed to give & finished product that customer need after getting the P.O from the customer.
    2     Customer will send the material with excise invoice (paid by customer).
    3     Client receives the material post the customer excise invoice with part-1 & part-2 entry in the RG23A register.i.e Cenvat credit taken by Client for the customer material.
    4     The received Raw material processed by Client converted to finished product with RG1 entry.
    5     Finished send to the customer with excise duty paid by Client
    6     As excise duty liability is with Client every month excise duty difference between credit taken & paid is settled with customer.
    E.g. For August month
              Cenvat credit taken for raw materials Rs-10000
              Excise duty paid by the Client Rs-50000
              Difference to be paid by the customer to Client is Rs-40000
    Pl guide me how to map this process in cin
    Regards
    Umapathy.M

    Hai,
    The pre requisties for this scenario in CIN part is
    1. Create the input raw material with UNBW material type.
    2. Create the customer as a vendor.
    3. Maintain the input material in J1ID with material type raw material & chapter ID.
    4. Maintain the excise details for this vendor with excise indicator.
    5.Maintain the assessable value for this material in J1ID. This has to be flow for excise calculation.
    6.Maintain the excise tax rates for the Chapter id in J1ID.
    7.Mainain the 501 Mvt type in IMG - Logistics general - Tax on goods & movements - India - Business transactions - Incoming excise invoices - specify which mvt type involves excise invoices.
    8.Maintain the settings for register entries & GL accts in Acct determination in IMG - Logistics general - Tax on goods & movements - India - Acct determination for the excise transaction type EWPO.
    The steps involves are
    1.Create a sale order with excise tax code conditions for the processed fininshed product.
    2.Do the MIGO with other receipt for 501 Mvt type to receive the raw material. Capture the excise invoice in the MIGO itself.
    3.Post the excise invoice by J1IEX.
    4.Do the process with PP cycle.
    5.Send the finished product with SD route.
    6.Do the Billing & outgoing excise invoice.
    7.The SD  Pricing procedure has to be configured as per the requirement.
    8.Check the accting entries at the Customer acct.

  • PS subcontracting with external activity

    Hi,
    I have a couple of questions about "PS subcontracting with external activity" I have not found any information about this for PS subcon flow, I was looking for a subcon PS Wiki but no succeed.
    The scenario is to use a  external activity to a subcontractor and put the material components to deliver in the  external activity and check the subcon check box. Then use the valuated project stock for holding the materials.
    For material components there is an option in tab "Proc. Param" and fiel "Mat. Prov. Ind." = "Material Provision Indicator", do you know if this option can be use or be available in PS? This field is grey so I can not do anything with it, so my guess is that option use only by a BOM, could you confirm that for me?
    Right now I have a problem in the system so I can not save a project when creating a external activity and use the subcon check box, this is at OSS right now. But I was wondering if I put the material components in a external activity, how will it be represented in the PO?
    Will it be only one item in the PO, the service from the external activity? and inside this item will hold all my material components? this can be found in tab "Material data" -> "Components".
    Please share if you have some information about this,
    Regards
    Jose
    PS Note that this scenario is not a MM subcon

    abdul,
    I'm talking what you can do in the system, there is 3 posibilities I have in mind:
    Alternative 1 
    Is when I will send all the parts, thats right separated parts to be one. The material which will be the final material, is not in my stock/company. It is a new material Im manufacturing with the help of a subcontractor.
    In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will put it together to the final material.
    For this alternative I think I have to create the material which the subcontractor will put together and have it as a head material in a BOM. The BOM will represent the parts Im sending for assembly, so when the material is deliver back to me, I will do a goods receipt of the head material.
    My question is in this if I have thought this right, if you have experience of this please contact me.
    Alternative 2
    Is when I will send a existing material and all the parts which will be use to maintain/repair this particular material from my stock/company to a subcontractor who will do the work. This material will have the same material no. when I do the goods receipt.
    In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will maintain/repair the material.
    For this alternative I think I can use a BOM, create a BOM of this existing material which will be maintain/repair with the parts I will send.
    My question is in this if I have thought this right, if you have experience of this please contact me.
    Alternative 3
    This alternative is almost the same as alternative 2 with the exception that the material Im sending will change the material no when its back from the subcontractor. So I will send a existing material and all the parts which will be use to maintain/repair this particular material from my stock/company to a subcontractor who will do the work. This material will get a new material no. when I do the goods receipt.
    In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will maintain/repair the material.
    For this alternative I think I can use a BOM, create a BOM of this existing material which will be maintain/repair with the parts I will send. Then I have to put the new material in my external activity as a material component with negative quantity as part of the subcontracting delivery
    My question is in this if I have thought this right, if you have experience of this please contact me.
    I hope my question is now clear for you, we are using the defence and aero solution so what I know I do can use the subcontracting with valuated project stock

  • Subcontract with full payment of excise duty

    hi gurus
    Can any one provide me itutor link of subcontract with full payment of excise duty,import cycle,import under custom bonded ware house
    Thanks in advance
    Roc

    hi
    This is a subcontracting under full payment of duty scenario.
    Refer this link
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
    Subcontracting Under Full Payment of Duty
    Purpose
    This procedure illustrates how you use the system to send materials to your subcontractors for processing using normal excise invoices.
    Prerequisites
    You have created a condition type for manually entering excise duty in the subcontract order. In the standard system, you can use condition type JEXC, maintain in pricing procedure.
    Process Flow...
    1. Create a
    tract order for the subcontractoru2019s services.Enter excise manually in the condition type JEXC & take a tax code for VAT calculation.
    2. Do the transfer posting for the materials that you want to send to the subcontractor.
    3. Create an outgoing excise invoice for the materials by J1IS & J1IV.
    4. You send the materials to the subcontractor, together with the excise invoice.
    5. The subcontractor processes the materials and returns them to you, together with another excise invoice.
    6. Captures the subcontractoru2019s excise invoice, using the purchase order as the reference document.
    7. Do the goods receipt & refer excise invoice in excsie tab.
    8. Posts excise invoice.
    9. The accounts payable clerk posts the subcontractoru2019s invoice.
    for imports
    Import scenario
    To map Import procedure into SAP , follow the following steps :
    1.Create material master of import goods.
    2.Create vendor master record of import vendor and Customs clearing vendor.
    3.Maintain CIN settings.
    4.Maintain J1id.
    5.Maintain Pricing procedure SAP standard JIMPOR..,maintain required conditions..JCDB,JCV1...
    6.Assign the schema to respective import vendor in Purchasing view of VMR.
    7.Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned..This can be done by In condition tab select condtion then click on display,then enter.
    Save the PO.
    8.MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
    9.Capture Excisse invoice--j1iex.
    10.MIGO.
    12.Post Excise Invoice.
    13.MIRO...Payment to vendor(import vendor)
    http://help.sap.com/erp2005_ehp_01/helpdata/en/95/3ca40a110511d4b5ae006094b9ec21/frameset.htm
    regards
    kunal
    award if helpful

  • Subcontracting with pay of Excise Duty

    Dear All,
    In Subcontracting with pay of Excise Duty,
    How much % i have to maintain in Condition Type JEXC & how could i get the accounting entry mention below in MIGO & Excise flow in BED,ECS & SECS fields.
    CENVAT Input BED - Dr
    CENVAT Input ECS - Dr
    CENVAT Input SECess - Dr
    CENVAT Clearing A/c - Cr
    Plz suggest...........
    Thanks

    Hi,
    Indeed, in subcontracting process u donot need to pay any excise despite the material sending to the vendor is excisable one. Here in this process:
    1. U have to create a subcontract  challan with J1IF01 and take a print out of the challan with j1if13 and send with subcon material.
    2. Transfer the material from our stocks to subcontractor vendor with 541 movement type.
    If the material is not received from  the vendor with in 180 days u have to pay the CENVAT credit amount taken at the time of  purchasing.
    And, u can take the credit again after receiving the material again using J1IFQ.
    If it is of  inventorised excise type, u donot need to think of it as the values r gets added to the material at the the time of purchasing itself.
    Regards,
    Bhuvan

Maybe you are looking for