Subgroups disappear after closing project. Is there a subgroup limit?

I have a program that takes in voltage inputs and converts some to rms current values and some to rms voltage values.  I created subgroups to use scaling factors in two seperate formula steps that would output the scaled rms voltage and currents.
After saving the project and reopening, the subgroups are gone and the formula steps have the wrong inputs.
I have redone the project many times with no success.  Is this a common problem? Or are there subgroup limitations?

This issue is currently being addressed by R&D. A Corrective Action Request (CAR) has been filed and can be referenced with #124517.
Regards,
Glenn
Applications Engineer
National Instruments
Regards,
Glenn

Similar Messages

  • Objects in symbols disappearing after closing/reopening project-HELP!!!

    I am a college student working in flash CS5 and am in the middle of an animation project where i am creating a walking human figure using armatures.
    I began the project on the school computers, everything working fine. saved project to several places, including flash drive and computer's thaw space
    brought project home to continue working on my macbook. opened project and figures animated arms and legs (which were perfect on school comp) are completely missing. The symbol names are still in the library, but the objects themselves look like they've been deleted. they are nowhere to be found.
    This has happened every single time I close flash and reopen it, whether on the same or a different computer.
    I have had to recreate the whole project from scratch 4 times now because of this.
    I came in early to class to work on the project more, and lo and behold, it opened with all the arms and legs (the ones i had redone for the 4th time, from the most recent work session on my laptop). I continued working on the project, all going great, but then another class came in and i had to change computers.
    I saved in multiple places again, flash drive, thawspace, etc. and moved to another computer. Opened project from my flash drive, and the arms and legs are all missing again. i just have a floating head and torso, and the project is due in an hour. There's no way I can recreate all the drawings and armatures and animations from scratch a 5th time in just an hour.
    Here is any additional info that might help:
    both school and home computers are running Flash CS5
    began project on school computer using several flash files:
         1st file was simply to draw the pieces of the figure.
         2nd file i imported pieces from file 1 into library to begin animating in file 2.
         (once the objects were imported into file 2's library, file 1 should not affect them right?)
    I continued to improve and refine and eventually animate body parts in file 2, saving continually.
    As long as project is not closed, everything works perfectly. Once project is closed and reopened (even on same computer) armatured objects disappear.
    Their symbol names (placeholders) still appear in the library, but when you select them and see the overhead preview or enter symbol editing mode, it shows a blank screen.
    ******IMPORTANT******
    organization of files is this, in descending order from outtermost to innermost symbols
    1. mc_model-------------a movie clip of the entire figure, containing all the figures individual animated parts as separate symbols
    2. gs_leg------------------a graphic symbol containing one keyframe extending 40 frames, simply a placeholder for the armatured leg in the nested symbol
    3. gs_legArmature-----another graphic symbol containing the original drawing of the leg, also the leg's armature and animation, lasting 40 frames.
    NOW here's the thing.....when you enter into all of these symbols (mc_model>gs_leg>gslegArmature) and you are on the deepest level of the leg which contains the armature, once the project has been closed and reopened, the ARMATURE IS STILL THERE. The poses are still recorded in the timeline, the armature bones or connections or whatever the name for them is are still there, just the actual leg is gone. Just the drawing of the leg.
    I will try to attach a screenshot so you can see what I'm talking about
    http://i295.photobucket.com/albums/mm150/haleymariemackenzie/Picture2.png
    <img src="http://i295.photobucket.com/albums/mm150/haleymariemackenzie/Picture2.png">
    Hopefully that worked......
    Any help is appreciated. It is too late to save my project, but I want to get to the bottom of this so I can at least avoid it in the future.
    Thank you

    We are checking the cursor status from v$open_cursors. As you said it may be cached cursors.
    We have find out one more thing in connection pooling setting in Tomcat.
    It is having the below setting :
    connectionCacheProperties="(InitialLimit=2, MinLimit=2, MaxLimit=1024, MaxStatementsLimit=50, ConnectionWaitTimeout=10, InactivityTimeout=300, PropertyCheckInterval=600)"
    connectionCachingEnabled="true"
    If we are changing the value as follows , then the database is not showing any open cursors or even inactive connections.
    connectionCachingEnabled="false"
    But we cannot change this to false because of some other reasons .
    Can anybody explain why it is happening. Is there any other way around ?

  • Artboards disappear after closing and reopening a file

    My coworkers and I have been running into an issue when we use documents that have multiple artboards. After we do ouer work, we save and close the file. When we go to reopen the file, all but the first artboard have disappeared. Looking in the Artboard panel, the original artboard counts up after every save.
    For example, say I were to create a new file and add a couple artboards. After saving, closing, and reopening the file, the additional artboards would be gone, the artwork on those boards would still be there, and the original artboard would be labeled as "Artboard 2". If I were to add the missing artboards again, the same issue would occur and reopening the file would have the first artboards labeled now as "Artboard 3".
    I am using Illustrator CS6 and saving the files as an .ai with the default settings.

    Are you saving locally? Over a network? Mac or PC?

  • Originals disappeared after renaming project

    Hello!
    After the import from a SD-card into a new project in Aperture I have
    a) firstly deleted the photos (****!), then ...
    b) created some new projects and finally ...
    c) moved the initial photos from the new project into the other projects.
    The result of all this is that all photos are still in Aperture (even in full-screen-modus) but the originals are not here anymore! Every time I try to edit/delete/export/send the photos Aperture refuses to do it and shows me in the error-message that the originals couldn't be found. Not even Spotlight/TimeMachine find them!
    I could also repeat the whole process: I made new photos, imported them into a new project ... they were still there, even after restarting Aperture ... as soon as I rename the project Aperture said that the originals disappeared!
    Do you have an explination for that?
    And perhaps even a method to restore all the lost photos?
    Desperately,
    Vlad
    P.S. iMac 3.06 GHz, MacOS X 10.5.5, 4 GB Ram, Aperture 2.1.2.

    Honestly I cannot even remotely begin to figure out exactly what you did or did not do. My best guess here is that you imported the photos as referenced masters (leave images where they are option) and got rid of the masters at some point. If this is the case you are most likely SOL as the only recourse is to use a recovery program that takes forever to run and is the most successful the less volatile the file system/disk that it is recovering.
    If you have a vault or other backup obviously they are still there. If not now is the time to fix your work-flow in a couple of ways.
    RB
    Ps. If this is not the case it is something inane but I will trust you when you say that they are gone. 99.9999% probability that Aperture didn't get rid of them if they are gone - you did. Gotta love all the folks espousing "only use referenced files no matter what".
    Message was edited by: rwboyer

  • Premiere Elements 9 window disappears after loading project

    Hello all,
    I've been having issues with Premiere Elements (9) lately. I have read other threads similar to my problem and followed some of the instructions (deleting the Pref file, for example).
    Whenever I open a specific project (that has worked before until recently), the loading progess bar goes from 0-100 and then it stays there. After that, the entire program disappears. It doesn't crash (as it's still in the task bar), but when I click on PrE9, nothing comes up. When I mouse-over the icon on the task bar, it's just the window buttons (minimize, expand, exit).
    The reason I started this thread is because none of the problems I found were really similar to mine.
    Any help would be much appreciated.
    (Also, please pardon me if this thread is in the wrong place.)
    Thanks!

    Unitedmoviemaker
    Have you looked at any possible involvement of the antivirus program in the way of recent updates for it? Recent Windows Updates? Can we assumed that you have not added, subtracted any programs that would coincide with the onset of the issue?
    Have you checked to make sure that your video card is up to date according to the web site of the manufacturer of the video card?
    Recently, with Premiere Elements 10 and NVIDIA video card, answers have come from rolling back the driver.
    I guess you tried the Adobe Premiere Elements Prefs file deletion. But, did you try deleting the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists?
    Do you have the Premiere Elements 9 installation disc for installations files in case a deactivation, uninstall, run through of ccleaner, reinstall is indicated?
    But, let me backup for a moment. Is this issue confined to one previously created project or to all your Premiere Elements projects either new or old?
    Let us start here and then move forward according to your answers.
    Thanks.
    ATR
    Add On...Usual...confirm that you have the latest version of QuickTime installed, you are running the program as the 9.0.1 Update, and you are running the program Run As Administrator or from a User Account with Administrative Privileges.

  • Clip markers not saved in media browser after closing project

    I suppose when I set markers in clips opened in the mediabrowser the're not saved because the clip is not brought in the project  or is there a workaround to save hem even when not in the project?

    The explanation makes sense.
    The solution does as well - import the clips.

  • Safari windows will not disappear after closing

    When I close windows under Safari, they will keep on staying in full screen but turn completely grey. The whole windows becomes grey and it won't disappear until i restart safari. i can switch between full screen windows and everything just as it would be a running program. This appeared since i upgrade from the beta to official release. Can't upload a pic for some reason on here.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Team tab disappears after loading project

    I recently setup Project server to TFS integration. I was able to run all the cmdlets fine. One of my projects (QATASks) integrates between Project server and TFS fine. However when I create a new project (Test1) in project server and TFS run the /mapplantoteamproject
    command and then open the Enterpriseproject in Project 2013 the "team" tab initially appears and then disappears. When I open QATasks the team tab appears and when I open Test1 it appears initially and then disappears.
    I have checked addins to make sure Team foundation addin is not inactive or disabled. Pl help - at my wits end. 
    I have also compared all permissions between QAtasks and Test1 and everything is setup correctly.

    Unitedmoviemaker
    Have you looked at any possible involvement of the antivirus program in the way of recent updates for it? Recent Windows Updates? Can we assumed that you have not added, subtracted any programs that would coincide with the onset of the issue?
    Have you checked to make sure that your video card is up to date according to the web site of the manufacturer of the video card?
    Recently, with Premiere Elements 10 and NVIDIA video card, answers have come from rolling back the driver.
    I guess you tried the Adobe Premiere Elements Prefs file deletion. But, did you try deleting the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists?
    Do you have the Premiere Elements 9 installation disc for installations files in case a deactivation, uninstall, run through of ccleaner, reinstall is indicated?
    But, let me backup for a moment. Is this issue confined to one previously created project or to all your Premiere Elements projects either new or old?
    Let us start here and then move forward according to your answers.
    Thanks.
    ATR
    Add On...Usual...confirm that you have the latest version of QuickTime installed, you are running the program as the 9.0.1 Update, and you are running the program Run As Administrator or from a User Account with Administrative Privileges.

  • Contacts will disappear after bulk vCard import

    Hi all,
    After bulk importing multiple 700 vCard contacts to the Address Book application (Version 8.0 - 1371) on Mac OX Mavericks, they disappear after closing and reopening the application, just showing the original 7 iCloud contacts I previously created.
    Facts:
    I am trying to import (by drag & drop) 700 vCards 2.1 - windows latin 1 (already selected this format in the Address Book Settings), created with Outlook 2002.
    Address Book is connected to iCloud
    Already tried, unsuccessfully:
    Merging previously all vCard into a single one.
    Doing the import after disconnecting iCloud, merging the contacts, reactivating iCloud.
    Doing the import after disconnecting WiFi and LAN, merging the contacts (even without reactivating them afterwards).
    Creating a new contact after the import before closing the application.
    The previous 3 combined.
    Importing the merged vCard directly on iCloud (getting Error though the file doesn't exceed the limitations)
    In any case is that after closing the application the imported contact not be there any more: only the 7 iCloud contacts (or the "on this mac" if iCloud deactivated) will remain in the Agenda. I do not think it has to do with iCloud.
    I the only clue I have, is that importing the vCards one by one, or in small groups (>10), they "may" remain recorded in the Address Book.
    Does anyone have an idea or workaround to make this bulk import of vCard contacts?
    Thanks,

    So I had to do it manually... in blocks of 5-15 to see the conflicting vCards, that would not be recorded (and hence not automatically synchronized with iCloud).
    Out of the 712 contacts, 8 were not recognized by the Adressbook.
    No idea why, because the other 704 vCards were in the same format (v2.1) and codification (Windows latin 1), and where having also special characters in the .vcf filename or in the data inside.
    I think there is a codification/import issue that Apple should check.

  • Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    “Hi Kirby, thanks a lot for your answer.
    I got one answer, from DMoore, saying:
    “Try Safe boot and then restart with only Aperture open.  Still doent work write back with more details like Ram, HD capacity/free space.  Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
    Safe boot   http://support.apple.com/kb/HT1564
    Starting up into Safe Mode does several things:
    1  It forces a directory check of the startup volume.
    2  It loads only required kernel extensions (some of the items in /System/Library/Extensions).
    3  In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
    4  It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
    5  It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
    6  It disables all startup items and login items (Mac OS X v10.4 or later).
    7  Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
    As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
    But I understand your questions, so I’ll try to answer them;
    "loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or  I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
    I can see images in the Browser, so it only happens in the Viewer(s).
    I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers  – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
    Did Aperture work before?
    Yes it worked ok for a while, but I only purchased it on 24th May.
    If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
    So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
    But I have not changed the default Preview settings in Aperture Preferences.
    My macbookpro details:
    2.7 Ghz Intel Core i7
    Memory: 8 Gb 1333 MHz DDR3
    Hard Drive capacity 499.25 GB
    Available 387.36 GB
    I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
    I hope this helps you to understand more.
    Thank you for trying to help me.
    Tony

  • Project commitment shows even after closing PO

    Hi,
    I have developed a program to short close PO (in mass).  This program marks Delivery indicator and sets Latest GR Date.
    After running this program POs are short closed and To be delivered qty/value shows zero in MM reports such as ME2N.
    The problem is that this does not close commitments in Project.  When I run PS report (say CJI5), I get those POs as open and the remaining values are still shown as open commitment in PS.
    Please help me understand how to close this project commitment.
    Regards,
    UT

    I think this will work.  I ran RKANBU01 program after closing PO through my program and it successfully closed open commitments.
    I will confirm once I'm done with my testings...
    Thanks a lot!
    Regards,
    UT

  • When I use dynamic link how do I continue using it after closing and reopening a project?

    Hi
    Im very new to AF
    I cant seem to find the answer to this in any tutorials.
    When I using dynamic link, how do I continue using it after closing and reopening a perm pro project?
    Thanks
    Philip

    Hi Kevin
    Thank you very much for such a quick reply.
    I actually figured it out. As usual it was fairly obvious solution.
    I opened both project at the same time.
    Thanks again and sorry for waisting your time.
    R
    Philip

  • Subtitels are not saved after closing iMovie, Or duplicate project

    Subtitel can be changed but are changed back to old text after closing iMovie or in à duplicated version. Sharing The project is not a problem.

    You might find some tips here:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=2318851
    Karl

  • My Hotmail inbox on my iPad2 disappears after 3 days.  Also, although my folders are there, there are no emails in the folders.  How do I fix this?

    All the emails in my Hotmail inbox on my iPad2 disappear after 3 days.  Also, although my folders are listed on the iPad, there are no emails in the folders.  How do I fix this?  All the emails appear on my computer.

    You can sync Hotmail via Microsoft Exchange. It will mirror your email account on your phone so that the account will look just like the one on your computer. Here are the instructions:
    http://www.idownloadblog.com/2010/08/30/hotmail-iphone/

  • My iMac screen keeps showing pixels of previously opened documents and Safari tabs and hour or two after closing them. The shadow of those opened documents are still there hours later after shutting down and restarting my computer. What is happening

    My iMac screen keeps showing pixels of previously opened documents and Safari tabs and hour or two after closing them.
    Even when I swipe to the dashboard the outlines are still there when I know they should not be.
    The shadow of those opened documents are still there hours later after shutting down and restarting my computer.
    What is happening and what shall I do? Thanks in advance.

    Not much to go on in your product info, but maybe this will help: iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program. If not, then it's time to visit an Apple repair station.
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Maybe you are looking for