Subinventories not listed in Sales  Order Line

Hi Gurus,
Need your help for the below issue.
I enabled Subinventory field (through Folder>Show Filed) in the Sales Order line. But, when I click the LOV there were no subinvnentories listed. The inventory org is listed correctly. I tried with different OUs and also inventory orgs, but no use. I had created Storage subinventories only. The subinventory has stock on the item I entered in the sales order line.
Any feedback on this would be highly appreciated.
Thanks in advance.
Prasad Dhanakodi

Hi,
Doc ID: Note:737575.1 (Metalink)
Sub-Inventory Entered On Logistics Line Does Not Populate in Sales Orders
Hope this doc might give you some help.
Thanks,
Gaurav

Similar Messages

  • Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

    Dear All,
    This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
    Thanks & Regards,
    Patrick

    Hi
    I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
    Regards
    Raj

  • List of sales order line items delivery

    Hi All,
    I want to know from one single table, the list of sales order line items delivery completed and still having stock.
    Ratna

    Hi
    Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
    Regards
    Brahmaji

  • Internal Item Number " Items not appearing in Sales order Line form

    Hi,
    We are in 11.5.7 vis. While choosing an item in the Sales order form, only the line items with type 'chargemaster' and 'vendor' appear. The items with type 'Internal item number' doesn't appear anymore. The item validation organization is set to the Master Inventory organization.(V1).
    When i checked the pricelist creation screen, with product attribute - item number, the product value field is empty and greyed out for all the items.
    I compiled the system Items flexfield. I tried adding a new product to the pricelist with product attribute-item number,product value - A000 .All the items (with their internal item numbers) appear while choosing the product, but the product description doesn't default and the field remains empty and greyed out.
    After saving the item in the price list and if i query for this particular item, the product description appears but the product value now becomes empty and greyed out.
    Any explanation as to to why this is behaving so and to rectify the same?
    Regards,
    Nithya

    Hi,
    Check item category determination (VOV4) whether the item category is determine with the combination of  material item
    category group,untill the material being read by the system it will not give the line item no,and also check at VOV8 for your doc
    type Item no.increment Ex: 10, is maintained or not ,if not maintain and try.
    Regards
    Ram

  • Order Management Module - Sales Order Lines stuck with the Workflow

    Dear All,
    We are using Orcale E-Business Suite for our organization. Here, We are working Order Management Module. When Sales Executives the creating Sales Order, booked, Released and Shipped. After the Sales Order Line is partially closed,
    but is not closed all the lines. We are facing the problem for receivable transaction. We have two types of scenario the following as
    Scenario 1
    We have Sales Order 4 lines first two lines are closed properly after the third line is AWAITING_FULFILLMENT then the fourth line is Closed. So, the thrid line is not in the RA Interface. Please tell me the solution, how we can closed the sales order third line.
    Scenario 2
    We have Sales Order 3 lines first two lines are closed properly after the third line is FULLFILLED then the fourth line is Closed. So, the thrid line is not in the RA Interface. Please tell me the solution, how we can closed the sales order third line.
    Regards
    Abdul

    Hi,
    Please go through the following documents and see if it helps.
    Note: 238480.1 - In Sales Orders Form, Cannot Remove Fulfilment Set From Line in AWAITING_FULFILLMENT Status
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=238480.1
    Note: 417292.1 - Sales Order Lines On The ATO Model Are Stuck In Awaiting Fulfillment Status
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=417292.1
    Note: 297192.1 - Order Line Workflow Is Not Progressing Beyond Booked Status
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=297192.1
    I would also suggest you search Metalink for "AWAITING_FULFILLMENT" and "FULLFILLED", this should return many hits which may be applicable to the issue you have.
    Regards,
    Hussein

  • Items are not getting displayed in Sales Order Lines 'Ordered Item' field

    Hi All,
    Ordered Item field in Sales Order lines is not getting values When trying to create a Manual Sales Order.
    When clicked on Ordered Item LOV, no values are getting displayed.
    Thanks,
    Chandra.

    879035 wrote:
    Hi,
    I was unable to select any item (nothing is getting displayed in Ordered Item field when the LOV is clicked) in Sales Order Lines.
    The Sales Order header information i was able to enter & generate the Order Number.
    R12.1.3 is the version i am using.
    Thanks,
    Chandra.Have you done all the required setup in OM??
    Like system parameters...Imp one would be Item Validation Organization
    Make sure item is also available in the price list which you are using in order
    Mahendra

  • How to save LIST_LINE_ID of Price List when create Sales Order Line

    I dont know how save the LIST_LINE_ID of the Price List on Sales Order or anywhere when create Sales Order Line.
    I create with the following steps:
    Step 1: Create Price List for Item A with two line: Line 1 (Unit Price = 10,5, Pricing Attribute with Tax Classification Code = 5%), Line 2 (Unit Price = 11, Pricing Attribute with Tax Classification Code = 10%)
    Step 2: I create Sales Order Line with Item A, Tax Classification Code = 5% --> Unit Selling Price = List Price = 10,5 but dont bookorder
    Step 3: I update the Unit Price of Line 1 into 11.55.
    Step4 : I book this Sales Order. Howerver, I use form personalization to customize Book Event: if the Unit Price of Item on Price List > Unit Selling Price then cant not Book. But I dont konw List Price of Sales Order belong the line of Price List.
    Please help me check this issue. Thanks for your supports.
    BinhTC
    Email: [email protected]

    Bob's right - except that if you have OM: List Price Override Privilege set to 'Unlimited' (and from your scenario it sounds as if you have) it is possible that the value in unit_list_price will vary from what was originally retrieved from the price list.
    In that case, a safer bet is to use :LINE.original_list_price in your personalization as this will always contain what was originally retrieved and will mean you can avoid any repeat lookup via list_line_id.
    Regards,
    Jon

  • Purchase Item for a sales order but not on sales order lines

    Hi,
    Is it possible to purchase an item for a sales order but item is not actually on sales order? I know we can create PO through SO logistic tab and also through procurement confirmation wizard but these functionalities can be used to buy the item which is on the SO. The problem is that the item is not on SO. It's kind of hidden cost going against the SO.
    Will be grateful for your help.
    Thanks,
    Kanu

    Thanks Gordon. Ok I can add items to the PO. But will those items be costed against the SO? Because there is no SO number (POR1.BaseRef field) on that extra PO line.
    I appreciate your help here.
    Best Regards,
    Kanu

  • Not able to re-atp 1of the sales order line item

    Hi SAP PP Gurus,
    When I tried to re-atp 1 of the sales order line item it is giving error as mentioned below. Please let me know where this fix qty indicator in the sales order and how can I de-activate the same.  Thanks in advance....
    Item has no open quantity - Check fixed quantity ID
         Message no. V1 601
    Diagnosis
         The item does not have any open, confirmed quantities and the "fix
         quantity" indicator is activated. This means that the customer has
         agreed on a zero quantity and nothing is delivered.
    System Response
         The system issues a corresponding message.
    Procedure
         If you want the item to receive a confirmed quantity after all which can
         be delivered later, you should de-activate the fix quantity indicator.

    Hi Ritish,
    Strategy is MTO..
    I have triied to perform atp by using fix qty/date but still system in not proposing MAD. And it is giving below error screen.
    No. of components checked:                1
    Missing parts:                            1
    Overall confirmation date could not be determined
    Order : 1104739992
      Material           Plnt SLoc Reqmts q     Requirements  ATP/avai     Committ. d Material description M Bl
      NH524AA@@          32F2 F2WH   1.000      03.08.2009      0.000      99.99.9999 HP gt7725 PCI Expres X
    Thanks and Regards,
    SHARAN.

  • Sales Order Line item category not getting Re detemining Correctly

    Dear all,
                I need  help regarding the Sales order item category redetermination.
                we are having two item categories YNAE and YNAG and it contains schedule  line categories CP and CB ( i.e for item         category  YNAE schedule line category is CP and for item category YNAG schedule line category is CB),
    for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
    For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
             Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and  it is working fine .
             But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule line on SAVE and its delivary dates are also not getting determined properly. If i press the option ATP check at the schedule line level than very things will getting corrected.
       I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
    Regards,
    Vaddepally Manoj

    USEREXIT_PRICING_PREPARE_TKOMP is the wrong location - that exit is for pricing communication preparation only.  Your primary location for item category determination is USEREXIT_SOURCE_DETERMINATION (MV45AFZB).  In your simple scenario, you could consider making an availability check at this point with some assumptions and then assign the item category accordingly.  Otherwise, you can re-assign item category and schedule line category in USEREXIT_MOVE_FIELD_TO_VBEP.  The exit is called once before ATP (for ATP-relevant schedule line categories) and once afterwards.  The call is recursive if you re-assign another ATP-relevant category.

  • Price is not changing in sales order in line item

    dear all.,
    price is not changing in sales order on line item,error comes "CHECK ORDER STRUCTURE.
    Regards,
    Praveen

    Dear
    You can go into VA03 --> Menu --> Environment --> Partner --> display credit account (if the data is maintained, than the system springs into FD33). Another way is to check if the sales order type is assigned to credit management in the transaction OVAK (should be D for aut. credit management).
    Did you enter the pricing date , prcing condition and press enter , so  that it should pick the correct price?
    Check this and come back
    Regards
    JH

  • Value not flowing from sales order to contract in  addittional tab b(line i

    Hi all,
    i have created one field for the addittional tab b of sales order-line item wise.
    If i add one field in the screen-SAPMV45A(8459) the sales order and tha contract(VA41) will be updated.
    But in our bussiness case the Contract is automatically creted once the sales order is created, but the value in the new field is updated in sales order and the value in the contract is nill.
    How can i get the value in the contract for the same field?.
    Regards,
    neslin.

    Transaction Code - VA41                     Create Contract
    Exit Name           Description
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    No of Exits:         15
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

  • VL01N does not to pick Sales order schedule line quantities

    Hi,
    I need to get Sales order schedule line quantities into VL01N when creating a Delivery document. Currently irrespective of the schedule line size quantity the existing stock quantity is picked into VL01N.
    Is there anyway to get this done? doe it require a user exit modification or cna this be done via IMG.
    Thanks & Rgds,
    Pradeep
    Edited by: PRADEEP GUNAWARDANA on Aug 1, 2009 5:06 PM

    Hi DB49,
    Thanks for responding.
    Let me clarify, the schedule line item i meant was, in my case this is an AFS scenario were we maintain size wise quantities.
    My issue being for example;
    Sales order line item 10 - Qty 1000 (sizes S - 250, M - 500, L - 250)
    Stock created in excess of this requirement, so size S - 1000, M - 1000, L - 1000 in stock
    In VL01N, when creating the DN for line item 10, it picks the Quantities in stock (which is 1000 each) ... instead of limiting it to the Sales order quantities of sizes S - 250, M - 500, L - 250.
    Hope this is clear ... please advice.
    Thanks,
    Pradeep

  • My customer is looking for a comp. open (unbilled) sales order line report

    Hello:
    My customer wants a listing of open (unbilled) sales order lines.  List of everything they have ordered and do not have a bill for yet.  That seems to be spread between 'Open' Sales Orders - see VA05 (no outbound delivery created yet) AND outbound deliveries that have not yet been billed - see VL06O with Billing Status not completely processed.
    How can both of these be merged into one? 
    Is there something else that can show this TOTAL picture?
    Thanks.

    Hi,
    To show all picture you can go for z report
    Take data from table VBAK,VBAP,LIKP,LIPS,VBRK,VBRP,VBFA
    Kapil

  • Standard T Code to release list of sales orders in 'Delivery Block'

    Dear All,
    Is there any standard transaction code in SAP which provides the facility to release list of sales orders in 'Delivery Block'. (Additional information - List of sales orders in 'Delivery block' is available in V.14,however it does not have release facility).
    For example, VKM3 gives the list of sales orders in 'Credit block' with release facility.On the same lines, is there any standard T code or any other facility in standard SAP which provides the facility to release list of sales orders in 'Delivery Block'.
    Thanks and Regards,
    Zahid

    As already suggested, if you execute VA14L you can see all sale orders that are blocked at
    -  header level
    -  item level
    -  credit check
    Wherever you see "X" under the tab Header level, double click on the respective sale order, so that system will take you to sale order in change mode.  You can remove the header level delivery block and save.
    thanks
    G. Lakshmipathi

Maybe you are looking for