"Subject Area" in Info Business Event Group

What is the application "Training Center" in ESS? Why shoul I check/uncheck "Subject Area" check box so that a Business Event Group displays/not displays in the Training Center?
Points assured!
Thanks,
Nivedita.

Hi Niveditha
   The way you view the training courses in you portal can be simulated in your R/3 system using
   transactions PV7I & PV8I.  If you want to refine your searches with one particular course group, then
   the subject area is useful. When you check this option for a course group, you will be able to search
  courses under this particular course group only from the portal. 
Regards
Vivek

Similar Messages

  • Short Dumps in standard HR Business Event Group/Event creation transactions

    Dear All,
    I m getting short dumps whlile executing standard HR transactions for Creation of Business Event Groups and Business Event Types. Attaching the Short Dump text herewith. Can anyone plz. help...
      An exception occurred that is explained in detail below.
      The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
       not caught in
      procedure "RH_BASE_READ_INFTY_NNNN" "(FUNCTION)", nor was it propagated by a
       RAISING clause.
      Since the caller of the procedure could not have anticipated that the
      exception would occur, the current program is terminated.
      The reason for the exception is:
      Eine Open SQL-Klausel wurde dynamisch angegeben. Der darin auftretende
      Feldname "SUBTY" kommt in keiner der Datenbanktabellen aus der
      FROM-Klausel vor.
    Thanks and Regards,
    Sudipto.

    Hi,
    Check whether the OSS note 207515 is suitable for the below situation.
    Summary
    Symptom
    A dump occurs in program SAPLRHDB: DBIF_NTAB_TABLE_NOT_FOUND
    Additional key words
    RH_BASE_READ_INFTY_NNNN, LRHDBU16
    Cause and prerequisites
    The system wants to access table HRPnnnn  particularly by means of an entry in the infotype check table T777D. This access can be processed in various places, including in the profile generator. Here, a termination occurs if the 'ent' table/structure in the dictionary is no longer available. This generally affcts customer-specific infotypes. These have been created and possibly deleted again. However, the entry in table T777D is not available. You can also import the entry into another system with a transport of the table. If the HRP table/structure is then missing, a termination may also occur in this case.
    Solution
    You must check on an individual basis which infotype the termination refers to. If it is a customer-specific infotype, the customer is responsible for removing the cause of the termination. If the table entry is a 'remnant', the entry can simply be deleted.
    If the termination refers to an SAP structure, you should consult SAP before carrying out any further activities.
    Source code corrections
    Header Data
    Release Status: Released for Customer
    Released on: 23.03.2000  23:00:00
    Priority: Recommendations/additional info
    Category: Customizing
    Primary Component: PA-BC Basis
    Releases
    Release Independant
    Satya

  • Business Event groups and types.

    Dear Experts
    Following is the case where user is end up with the existing no. range for the Event groups and types.
    How can i assign new no. range for the both?
    Below is the current situation:
                                                    Int                                                      Ext
                                      From         To            Current                      From         To
    Business event type     70002100  70009999
    Course                        71000000  79999999  71001849      
    Location                      70010200  70010399  0      
    Resource                     70010400  70010999  70010424      
    External person            70011000  70019999 0      
    Business event group    70000100  70002099
    Your help will be really appreciated
    Regards
    Jayeeta

    Hi nalla
    thank u so much for your reply
    but what i want to know is that all existing number ranges are exhausted
    how do i now assign new number ranges to the Business Event groups & types
    please help
    Regards
    jayeeta

  • Collaboration Room in Business Event Group

    When I create a Business Event Group, in the tab Further Information, there is something called Collaboration Room. What is it?
    Points assured!
    Thanks,
    Nivedita

    Hi nivedita,
    This is an integration point between TEM and LSO (Learning solution) modules.
    Collaboration room are used in LSO.
    First you need to have opened the integration switch via:
    SPRO : SAP Learning solution -> TEM -> Integration -> Collaboration for Netweaver.
    Regards,
    Dilek

  • Business event group in an appraisal template catalog

    HI all,
    Is there any way to include the catalog of training in an appraisal template catalog? ie, a column where you can select a business event group (object L).
    thanks, regards

    Hello Sergio,
    I guess your post is in the wrong forum - this forum is about Supply Chain Event Management.
    Regards
    Berthold

  • Business Event Group

    Dear all
    When i am going in S_AHR_61011889 to create a new business group i am able to create a business event group but it is not showing in PSV2 i.e. business event menu. Instead it is showing in S_AHR_61011887 - Master Data Catalog .
    When i am creating a new Business event type and assigning the same to the above created Business event group then it disappears from S_AHR_61011887 - Master Data Catalog .
    Ideally when a new business event group is created it should be shown in PSV2 i.e. business event menu but it is not showing.
    Please help me out to solve this issue. Its urgent.
    Regards
    HarshVardhan

    Dear mam
    Creating a business event group is not a problem. T Code which you have given, business event group can be created but is is still being shown in Master Data Catalog and not in business event menu.
    Creating a relationhip of event type & event group cvan be done but as soon as it is created it disappears from mastr data catalog.
    In the past when ever i have created event group & event type it was shown in PSV2 i.e. business event menu.
    Please guide me.
    Regards
    Harsh vardhan

  • Subject area security validating users and groups from external table

    Hi all.
    I don't have practice to put question here, but there is one problem, that seems don't work correctly in OBIEE.
    I'm trying to put users in groups within external table and this works fine.
    I put security on the subject area level like this:
    SA1 -> GroupA allow, Everyone not allow
    SA2 -> GroupB allow, Everyone not allow
    External table:
    User----------Group
    A---------GroupA;GroupB
    B---------GroupB
    Users A, B and GroupA, GroupB exists in the RPD, but I didn't put users inside them, I want this from table.
    From the init block, external table I'm taking users and join them in the group. Same name users and groups are also in the presentation service.
    When i connect with user A i don't see any subject area, when go to My Account i see in Group Membership/GroupA and GroupB, so it's readed from the external table.
    Why in this case the subject area permission is not working?
    It works if I explicitly put users in groups, in the RPD.
    I have read this blog entry http://kpipartners.blogspot.com/2009/07/groups-webgroups-and-delivers.html and it is said that this works, but I'm interested how.
    What should we have in the presentation part, administration, Manage Privileges -> Access within Oracle BI Answers option for those two subject area?
    This doesn't work or something is missing:
    Re: Security on Subject Areas
    Regards
    Goran
    http://108obiee.blogspot.com

    What should we have in the presentation part, administration, Manage Privileges -> Access within Oracle BI Answers option for those two subject area?Yes, you should remove Everyone and add the relevant groups to each Subject Area. You don't need to set privileges in the RPD, in fact that's probably why it doesn't work for you. Leave your RPD Presentation Catalog as "Everyone" = Read as you will controlling access from the Presentation Services and it should work.

  • Business event group in transaction PSV2

    Hi
    I have created a business event group under current plan version using Transaction OOEG.
    But I am unable to make it displayed in transaction code PSV2.
    If i create some other group under an already existing one, it is getting displayed.
    But if I create in the first level, the problem occurs.
    Can somebody help to resolve this....
    Thanks
    Raghu.

    Hi
    Thanks for the response.
    current plan version date ranges from 01.10.2010 to 31.12.9999
    The date for the created Business group is 01.01.2011.
    Since it was well within the plan date, I didn't changed the settings in "change settings".
    Later I tried with date range from 01.01.1900 to 31.12.9999.
    Now it's getting displayed !.
    rgds
    Raghu

  • Training & Event Management: Restrict Change to Business Event

    Hi,
    Does anyone know if there is a way to restrict change to Business Event (eg. changes to the Event Schedule) based on certain business criteria? My criteria cannot restrict by authorization.
    For eg. let say if something happens (based on business scenario), then my program will restrict the users to change details in Business Event, but they can still book Personnels to the event- so that means I can't use the LOCK/UNLOCK function.
    Thank you for your help.
    Regards,

    Dear,
    Oh! Sorry I did not noticed your initial post date, any how at least we can share knowledge.
    Regarding your concern about the FM, we have created function module ZHR_TRAINING_AUTH and table ZHR_TRAINING_AUTH to restrict authorization related to respective department secretaries and business event group.
    Then in Customization to create and configure the profile: go to Human Resources > Personal Management > Personal Development > Settings > Current Settings > Define Authorization Profile
    Then later on you can “Assign” this newly created profile to the users, then you are able to restrict.
    I hope this small information will help,
    Good luck

  • Training & Event Management - ERROR while creating a Business Event

    Dear All,
    My issue is - i have created my Business event groups n event types. when i right click on BET (or PV10) and create With/WIthout resources i am unable to save. i.e. i am unable to create a Business Event. when i click on save the screen doesnt get saved and the business event is not created under BET.
    But the icon pops at the Location. i have created few Locations via OOLC too
    Is there any setting iam missing?? Request your help to get this resolved.
    Thanks
    Priya R

    Hello Experts,
    Can you help me in creating a job in HR.
    I am trying to create job through Expert Mode, but I am
    getting an error as “object type C info type 1000 cannot maintained via basic transactions”
      Waiting for your valuable reply…

  • Business event (HR) -- follow up

    Hi,
    how can I know the business event group and business event type of a business event?
    Thanks.

    Hi Joseph,
    If you have a BusinessEvent .. you can find out the Type and Group with a Relationship it holds in table HRP1001.
    Business Event Group is of Object Type "L"
    Business Event Type is of Object Type "D"
    and Business Event is of Object Type  "E"
    Business Event "E" is Linked BEType "D" with a Relationship <b>A020</b>
    BEType "D" is linked with BEGroup "L" with a Relationship <b>A003</b>
    Hope this helps you.

  • One prompt for two or more subject area

    Does someone knows how to resolve this problem?
    I have two subject areas. And I need to create prompt that will work on dashboard that contain requests from two different subject areas (one request from one subject area). I hope that I was clear with this problem, if not I would try to explain it again.
    Thanks

    Hi,
    Another way is to have the same naming in both subject areas. So the names of the items you can pick should be: both presentation table name as well as presentation column name. i.e.:
    Subject Area A:
    Product Dim
    Product Group
    Product Name
    Subject Area B:
    Product Dim
    Product Group
    Product Name
    Then you can create a prompt on either Product Group name and it will affect reports from both subject area's
    Regards

  • Duplicate Subject areas

    Hi All,
    We are facing an issue where we are given only 1 OBIEE instance for testing.
    I need to connect to DEV and a test instance.
    I am thinking of an option where I will duplicate the subject area and create a new subject area.
    For example: - My current subject are is 'Shipment Reports".
    I will rename this as 'Shiment Report DEV" and duplicate this to create new subject area ( along with Business Model and Physical layer both) "Shipment Report UAT"
    Now I will point  'Shiment Report DEV" to DEV database and "Shipment Report UAT" to UAT databse.
    Is this possible and feasible?
    Any other shortcut idea is also welcome. I tried merging of RPD but instead of creating 2 subject area, admin is retaining only 1 subject area.
    I want to duplicate existing subject area.
    Appreciate the input

    take a copy of existing rpd calling as A.rpd and the base one is as base.rpd
    in A.rpd rename Physical layer then BMM layer and then Presentation layer
    and do the connection settings to point Test envi.
    save it and keep open the A.rpd
    Using different Admintool open base.rpd
    Copy Physical layer content from A.rpd using CTRL+C
    in base.rpd click on physical layer and paste it, then save with no consistence
    Do the same for each BMM and Presentation
    at the end save + consistence
    host it, mark this as correct and have fun

  • Business Event (HR)

    Hi,
    What database table can I find the following information?
    Business event group
    Business event type
    Business event ID
    Thanks

    Check HRP1000
    Objtct types -
    Business event group   L
    Business event type     D
    Business event ID        E
    Regards,
    Amit

  • Convention flag on Infotype 1029 (Business Event Type Info)

    Hi,
    I need to use this functionality of checking the convention flag & specify that my business event type is a multi-session event consisting of multiple sessions running in parallel.
    However, this indicator does not even appear for me.
    I am using TEM (ECC 6.0) & not LSO (I am aware that LSO does not support marking a course type as convention)
    I need to use this functionality & am looking for any inputs on how to get this to  display for me.
    I have the basic information available at http://help.sap.com/saphelp_erp2005vp/helpdata/en/6d/383acc834d11d1890c0000e821600b/frameset.htm
    But no information on displaying this falg.
    Please let me know if anyone has worked with this or with Multi-Session Event/Convention or Business Event Blocks (Infotype 1041).
    Thanks.

    Hi Chris,
    This is SAP Note No. 1014943.
    I am attaching the text here for quick reference.
    Let me know if this opens up the "individually booking allowed" option for you.
    I'll be curious!
         SAP Note No. 1014943                         19.07.2007           Page 1     
         Number              1014943     
         Version             1 from 08.01.2007
         Status              Released for Customer
         Set on              09.01.2007
         Language            EN
         Master language     DE
         Short text          Training and Event Management: Business Event Type
         Info
         Responsible         Emira Ylli
         Component           PE-PR
                             Training and Event Preparation
         Long text     
         Symptom
         The "Convention" indicator in infotype 1029 ("Business Event Type Info")     
         of a business event type is hidden.
         Other terms     
         Business event type, convention, Business Event Type Info, 1029,     
         MP102900, P1029-KONGX
         Reason and Prerequisites     
         This is due to a program error.     
         Solution     
         Import the relevant HR Support Package.     
         Valid releases     
         Software Component                        Release
                                                   from            to
         SAP_HR     
              R/3 Standard Human Resource
                                                   600          - 600
         Further components     
         PE-LSO-TM     
          Training Management
         Reference to Support Packages     
         Software Component                        Release     Package name     
         R/3 Standard Human Resource
                                                   600          SAPKE60014

Maybe you are looking for