Subject Areas for Manufacturing Analytics

Hi All,
I am having a BI Apps image which is compatible for Manufacturing Analytics.
Could anyone help me to provide the list of Subject Areas that needs to be loaded to BI DW for Mfg Analytics?
Thanks,
Harish Nunna

In the presentation layer of your RPD you can set the permission for each subject area.
regards
John
http://www.obiee101.blogspot.com/

Similar Messages

Custom fields not visible in Active subject area for reporting

Hi all,
I added a custom field to the object Service Request and I cannot find it under the field listing in Active subject area for building a report. The custom field is of the type integer. Any help is appreciated.
Thanks in advance

expand Service Request folder and then expand Service Request Custom Fields folder now the new field should be there

Seperate Subject area for Dashboard Prompts

Hi,
Is there any way by which we can create seperate subject areas for OBIEE dashboard prompt only??
Thanks

Hi,
Yes we can create separate subject areas for dashboard prompt's alone. Here is a case
Say we need to create a constraint enabled prompt in our dashboard. So we bring in two dimension columns into the prompt.
When we run the prompt, the queries across these two dimensions go through a fact table (Because the only way two different dimensions can be joined is through a fact . This fact table is chosen by BI Server intelligently at run time and that can be set through Implicit Fact column also though). In this case there is a chance that some of the dimension rows might get skipped in the constrained prompt as all of the records might not be present in the fact table.
To mitigate this issue, we might want to create a separate subject area for dashboard prompts alone (using some fact less fact or by having a surrogate key in the 2nd dimension table etc).
Hope I am clear :)
Thank you,
Dhar

Is it possible to hide a Subject area for user and still make dashboards

Hi,
I have requirement like i need to hide Subject Area for perticular user but still i need to allow him to run dashboard Reports developed on that hiding subject area.
means 'User should not see the Subject area but he shoud be able to run reports'.
is it possible in any way..?
Any Help appreciated..
Thank You,
Anil Kumar

Hi,
Try this one out
1) Create a new dashboard based on some other presentation catalog lets say p1.
2) Drag drop reports from required presentation catalog lets say p2 onto this dashboard.
3) Go to settings>Administration>manage presentation catalog and remove access from p2.
4) Give read only permission on dashboard created. It will make sure that you don't get edit dashboard option for that page.
In this way he won't be able to see p2 catalog in answers and still be able to access some reports on dashboard.
Regards,
Sandeep

OBIEE 11g: Searching Subject Area for measure names in Answers

Hello,
I have installed OBIEE 11g SampleApp 825 and just exploring the provided set of dashboards.
From the samples, I am performing following steps:
- I selected Edit Dashboard (for 2.1 Simple Demo Dashboard)
- For Column 2, in the Master Detail 1 Compound View, I did Edit Analysis
- which took me into the Answers design interface with 4 tabs (Criteria, Results, Prompts, Adv).
In the Criteria tab, there is the Subject Area pane on the left where it shows the Subject Area this Answers report is built on and a bunch of Folders like Time, Products, Base Facts etc.
Beside the Subject Area pane, is the Selected Columns pane where you drop fields from the folders.
This particular analysis (Product Line Analysis) has three columns: Revenue Analysis, Products Hierarchy and T05 Per Name Year.
Now, I want to find the folder to which the Revenue Analysis measure belongs. So, I started expanding each node/folder in the Subject Area pane and visually searching for "Revenue Analysis"....cannot find it!
How to determine which Subject Area folder a field on the Analysis belongs to? In Oracle Discoverer, only the Folders from which fields are selected are "enabled" so it's easy to navigate straight to that folder. Or again, in Discoverer, you can actually search for a particular field name and it will return all folders that have that field name pattern. While the Search feature on the top row is useful in finding which Analysis/Report match a string, it does not help in identifying relevant Subject Area Folder fields that match a pattern.
Is something similar available in Answers/OBIEE 11g?
Thanks,
Manish
Edited by: mhathi on Oct 21, 2010 8:53 AM

Again answering part of my own question...It was staring me right in the eye and I couldn't see it:-)...When you have a column in the Selected Columns pane, it's source is right there above the field name. If there is no source folder listed, then it might mean it's a formula. For example in my case, the Products Hierarchy column has the word Product above it...that's the folder it belongs to.
Good. But, the follow-on question still remains, how to search for folders containing a particular string, to find say all folders that have columns like %Margin%?
Edited by: mhathi on Oct 21, 2010 9:27 AM

Firefox not showing multiple subject areas for OBIEE source

Creating a new data set using the Oracle BI EE source. The dropdown list of subject areas won't drop down in Firefox, so I can't select any subject area other than the first one. It works properly in IE.
Anybody else noticed this?
OBIEE 11.1.1.6.9 with Firefox 18.0.2 or 21.0.

You should try both Complex folders as well as custom folders and see which gives you better performance. Discoverer SQL optimizations for example apply only on Complex folders and not on simple folders.
If you define the joins between the two tables, you can still use items from them in your Discoverer report without having to create a complex folder on them.
And finally, you can always create a view or materialized view and use that MV in your Discoverer query.
thanks
Abhinav
Oracle Business Intelligence Product Management
BI - http://www.oracle.com/bi
BI - http://www.oracle.com/technology/bi
Blog - http://blogs.oracle.com/
BI Blog - http://oraclebi.blogspot.com/

Generic UserID for a Subject Area for 10 users with individual my folders

Hi Experts,
I have a requirement to create a generic user for a subject area so that all the 10 users of that particular subject area should able login with the same username and if they create any reports it should be saved to their individual my folders, which means all the users should have their individual folders even though they login with one generic userid. Can anyone help me in this. Actually is this possible?
Thanks in advance.
Edited by: user12559013 on Feb 28, 2013 4:23 AM
Edited by: user12559013 on Feb 28, 2013 6:10 AM

Think about it...
>
all the users should have their individual folders even though they login with one generic userid
>
...log on with one userid...for all intents and purposes they are THAT user.
Not possible.

Subject Area for GL

Hi,
As far as I understand for BI Apps Fin implementation on top of EBS there are three parts: AP, AR and GL.
Witch are the corresponding subject areas that should be executed in order to obtain GL information?
For AP I suppose the corresponding subject area is Financials - Payables and for AR Financials - Receivables. Please correct me if I'm wrong...
Thanks,
I.

Hi,
To extract all finantials information you should include the following subject areas in the same execution plan:
"Financials - Payables"
"Financials - Receivables"
"Financials - General Ledger"
"Financials - Budgets"
"Financials - Cost of Goods"
"Financials - Revenue"
Regards!

Can we hide a specific subject area in answers for selected users

Hi,
Can we hide a specific subject area in answers for few users. I want to expose a particular subject area for only 2 users out of 10 . Right now if i expose it all 10 ppl with answers access will see that subject area. can i hide it for the other 8 without removing their answers access.

Log in as Admin- Setting-Administration-Manage Privileges-Search for your subject area and place appropriate restriction..

How to limit data for a dimension in any subject area?

Hi folks,
I do have a little problem, maybe you can help me:
I have a large subject area for all my countries and product i sell there.
now i want to have special subject areas for certain countries.
that for i ducplucated my large subject area, went to the identity manager and there I set special Rights für the users: I chose my fact measure and put a data filter for it on the dimension country.countryname = Germany.
I hope you can fallow me until here. ;-)
Now I can build a query in answers and it works, within this subject area I only get data for Germany.
BUT: when I'm on the criteria tab and try to create a filter on my countryname (from the dimension) it shows me all the countries I have.
I think for the end users this is a litte bit confusing.
So how do I limit the dimension in this subject area to a particular value?
I would be very happy for help, cause then I could finish my development for today ;-)
Kind regards,
Sven

Try this; @BMM Fact source properties->Content tab->WHERE clause section add the dimension country.countryname = 'Germany'.
Also set the implicit fact on the subject area.
Let us know how it works
Edited by: Srini VEERAVALLI on Apr 8, 2013 7:12 AM

Security for subject area in obiee 11.1.1.6

Hi every one,
I have installed obiee 11.1.1.6 and applied the patches 13794002,13884769,13887566,13892934,13916045,13926409,13932572
Here the problem is when i am setting permission as denied to r subject areas for users,still they are able to view that subject area and able to fetch data.
For rest of the components security is working fine. But for subject areas it is not working as expected.
Do anyone else faced this problem or is there any other patch i need to apply to overcome this.
Thanks in advance.

Hi Devarasu,
Thanks for your reply.
I have waited for 3 hours and even restarted the obiee services.
But even then users who are denied with permission for some subject areas can able to access them.
Thanks you very much.
Edited by: MKC on Jul 25, 2012 12:35 PM
Edited by: MKC on Aug 8, 2012 7:18 AM
Edited by: MKC on Aug 8, 2012 7:59 AM

List of Dimensions by Subject Area

Hi
How do i find the list of available Dimensions by subject area, for example - Project analytics.
Thanks

Hi,
What do you mean by Subject Area?
1. OBI Presentation Layer Subject Area:
Then you can use "Display Related" functionality of OBI repository - it will list all the physical/logical objects for each subject are
2. DAC Subject Area
Then you can use either DB scripts in the DAC metadata schema or easier refer to metalink Data Lineage document for the version of OBIA that you are using.
Hope it helps,
Michal

M:1 or M:M subject areas - Custom Object 01~03 and Activities

Please let me know when will be possible associated Custom Object 01~03 with Activities.
Is it possible in COD R17?

Thank you for your reply.
It may be seen as if all subject areas - Custom Object 01~03 and Activities - are associated with M:1 or M:M Relationship.
But after trying to analyse by COD BI Answer, I found it is 1:1 relationship not M:1 or M:M Relationship
In Oracle CRM On Demand Release 16 Transfer of Information New Custom Objects Analytics Functional Overview,
"M:1 or M:M subject areas, such as CO1 and Opportunities, are simpler to use, but require specific subject areas for each M:M association.
We only have subject areas to cover the association with Account, Contact, Opportunity, and SRs.
But we have customers who need the association to other objects, such Activities, etc…"
Please tell me about your method or knowhow. In below, It is a thing that I want.
- Objective
1. I use Custom Object 01 for Comment under the Calendar(Activity) Screen
2. I want to manage Comment that are made by Manager after closing Sales Activity
3. But, I can't manage Comment history in Calendar(Activity) Details because it is remained Last Comment in Details
4. So, I use Custom Object 01 for Comment
- Problem & Question
1. I can manage Comment history under Calendar(Activity) Screen
2. But, I can't make Report Comment Report related with Account, Contact
3. So, I want to know
a. Are there no relationship Custom Object 01(Comment) with Account, Contact in Calendar(Activity) Screen
b. If I have to make Comment Report related with Account, Contact, how to make it?

Using of already existing logical tables and columns in a new subject area.

Hi Every one,
i am new to OBIEE technology.
In my project i need to create a new subject area for already existing RPD.
In that RPD there are some logical tables and column created for previous project and i need to use those in this new subject area that i am going to create.
My question is what is the best way to use them .
I mean just to drag and drop them into new subject area or any other way.
please have your valuable suggestions
thanking you

Yes, you can basically copy paste all the tables that you need from BMM layer into your new folder in the presentation layer. Just make sure all the joins are defined well between all the tables that exists in the new folder, so you wont end up running into ODBC errors when you run analysis.
Hope this helps.
Thanks,
-Amith.

User can see the subject are but nothing under the subject area.

Hi
I have OBIEE 11g.
I was thinking this is a very simple case where I have one subject area for which I want to create a user such that it can create analysis and reports on that subject area.
I BIAdmin can do that currently.
So I created a new user in console. Under the 'Groups' tab of this user, I choose 'BIAuthors' from the 'Parents Group Available'.
Then I logged in as this user. User was able to see the subject area but only the header. When it clicks on the expand ( + icon in tree) it expands to nothing.
So i logged into the rpd and Under Identity -Manage , and open the properties for BIAuthor. and under Permissions , I gave BIAuthor the permission to the subject area.
That did not help.
I also opened the subject area from the presentation layer and under permission I made sure that "Everone" has Read access.
But even after a bounce the user just sees the header and it expands to nothing,
Any suggestion.
(I was also thinking that why do I see BIAuthors in weblogic where as BIAuthor in rpd (without s ). I was thinking the rpd BIAuthor is something from 10g version.
Thanks for all the help.
Edited by: user6287828 on Sep 13, 2012 2:33 PM

Hi,
Better to decline the subfolder permissions from the user @answers,then user can only see the subject area but he can't access the subfolders...
mark if helpful/correct...
thanks,
prassu

Subject Areas for Manufacturing Analytics

Similar Messages

Maybe you are looking for