Subject: Displaying key figures without currency unit in BEX reports

Hello,
Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
Thanks for your reply.
Regards,
Nuran Adal

Hi Eugene,
thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
Best Regards,
Nuran

Similar Messages

  • Problem with displaying key figures in report

    Does anyone have experience with SAP Report Designer for Release 7.0. I want to display key figures in the following manner: 1'500 (Which means 1.500.000) For a billion the value displaye should be 1''000 (1.000.000.000).
    1000 =     1.000
    0'010 =     10.000
    0'100 =     100.000
    1'000 =     1.000.000
    0''010 =     10.000.000
    0''100 =     100.000.000
    1''000 =     1.000.000.000
    Thus the report always shows 4 digit figures. The problem is that I don't know how to include the apostophe as a separator for the million.
    Additionaly to that I want to have the font changed to a smaller number, if the figure is to large for the column. Is there a possibity to change the display of the figure with the scaling? And is there a possibility to change the font? These two parameters have to be decided when running the report. (The scale of the numbers can differ within one column.)

    there is two way to display the values , one is globally, where u do it the keyfigure and another way is on the query designer level
    in keyfigure go to aggregation , there u will get the number display format , u can change there and another way is in the query designer right click on the key figure and select properties and select display format

  • List key figures in navigation panel of web report

    Hi,
    I have the standard navigation panel on the left side of my web report that shows a list of the characteristics in rows and a list of free characteristics. Under the heading columns I can see the point key figures.
    Is there any possibility to list all the key figures that are included in the report so that I can use the drag and drop function for adding / removing key figures?

    Philipp,
    Since Key figures is a structure, you cant see all the key figures under that area. What you can do is, you can restrict the keyfigures in the WAD report itself based upon your selection.
    Hope it helps,
    Assign Points
    Thanks,
    Gattu

  • Key figures with currency conversion showing weird values.

    Hi Experts,
    I have a variable screen,
    User can key in Target Currency, and Month.
    Say,
    (Scenario 1) User keys in Target Currency "MYR", and Month "4"
    The report will show
    Jan| Feb| March| April| May| June| ...
    2| 3| 5| 7| 0| 0| 0 ...
    This is correct.
    (Scenario 2) User keys in Target Currency "USD", and Month "4"
    The report will show
    Jan| Feb| March| April| May| June| ...
    2| 3| 5| 7| 3| 5| 7 ...
    This is wrong, should not show figures for month May and onwards.
    (Scenario 3) User keys in Target Currency "SGD", and Month "4"
    The report will show
    Jan| Feb| March| April| May| June| ...
    1| 2| 3| 4| 0| 0| 0 ...
    This is correct.
    *In the infoprovider, the key figure is tied to currency "MYR".
    In developement system, i replicated the exchange rate table, and the problem (Scenario 2) is solved.
    In test system, i replicated the exchange rate table, and the problem (Scenario 2) is still there.
    I am not sure what is happening here.
    Please could you please kindly advise.
    Thanks.
    Tee

    There appear to be two factors happening here.. one is how you have your query restrictions set up, and the other is the currency translation method that you are using. What results a currency translation provides depends on both the translation key definition AND the availability of a valid currency translation for the appropriate period.
    First, review transaction RSCUR and see how your currency translation is defined.
    Then review transaction oB08 and see if there is a valid currency conversion factor during the affected time.
    Once you're certain all that is correct, review your query and how it is functioning. The fact that you wish to display months for which you do not wish to return data seems to indicate your 0CALMONTH2 restriction is not set up properly.

  • Reporting Agent - Print Layout - Issue in Displaying Key Figures in Rows

    Hi,
    We have issue while printing reports using Reporting Agent. As part of Query Definition we have Structure of key figures in Rows. But while creating Reporting Agent , in Print Layout option – Under Table – Rows – we are not able to drag Structure of key fig.
    What could be the solution to this issue. How can we use key figures in rows?
    Thanks in advance.
    Samir

    Hi,
    putting product in the rows will slove the issues as the unit cost  depends upon the  prdoduct and therefore it will uniquely identify each of the material and then it will get multiplies with the qty and therefore you will get the correct result.
    this kind of issue you will always face when you are going to multiply cost with the Qty and as the cost differ with the individual material.
    Also putting material into the rows will cause the no. of rows to increase as all the materials will show up in the individual rows for the particular month.
    Also you can make a claculated key fgure for the multiplication and use before aggregation.
    But for that your both the key figures should be in the same cube i.e. in the same rows or the before aggregation will not work you will not even get an option of before aggregation in the CKF if the key figures belong to two different cubes.
    Since your qty and cost are coming from two different cubes before aggreagtion will not work here.
    And if you do before aggregation then you report will become quite slow as it will do all the multiplication anf then will bring the result.
    So it depends on your requirement and your design how to proceed.
    Hope it helps
    Thanks

  • Report Painter - new Basic Key Figure for Currency Translation

    Hi,
    I need a report painter report which allows to translate the company code currency HSL in GLPCT into several target currencies. Theoretically I need to translate each month with an own translation rate and possible different translation keys.
    In table T804B I tried to create a new basic key figure for GLPCT in order to translate the HSL amount with a second TCURR rate. I copied the original basic key figure GLPCT - CC_HSL. I selected structure GLBDZ and fields CCH++ as data source and assigned new variables for the TCURR selection.
    The report painter report is setup with three columns : one in HSL, one with CC_HSL and one with the new key figure. In the selection screen of the report painter report I can enter two rates. But after execution the translation of the new basic key figures is done with the same rate as the CC_HSL column is using.
    Did anybody encounter an equal problem?
    Many thanks and regards
    Markus

    have you created a new calculation routine in form pool SAPFGRWG equivalent to E06_CALC_CURR_CONV_HSL? doesnt this explicitly get the company code currencies

  • How to check where a apraticulr key figure has currency translations?

    Hi,
    i need to check the currency translations for a key figure!
    where i can find those translations? i mean i am not sure whether this has been wrdefined in update rules or transfer rules!
    how to check this?
    Thanks,
    Ravi

    Hi Sankar,
    i did not find any currency translations in URs nor in TRs nor in report KF properties!
    where else can be possible?
    i guess it is in extract structure? are there any still methods available to define currency translations.
    while running the report it is asking for currency variable in the selection screen!
    but really no idea what does this variable will have the effect on translation!
    any inputs?
    Thanks,
    Ravi

  • Display key figure as Hierarchy

    Dear All,
    I have a requirement where I would like to display the values of a key figure as range. I have Bonus as a key fgure. User would like to see the report as below,
    Rating   Bonus        HeadCount(No of Emp)
         1        0-20%             1
         1        20-40%           3
         1        40-100%         7
         2        0-20%             4
         2        20-40%           2
         2        40-100%         1
    Does anyone have worked on such a scenario where key figure values can be displayed as range.
    Regards,
    Niraj

    As said before, you can use a calculated key figure to get the result you need.
    For example 0% - 20% would be the following calculation (Bonus >= 0) * (Bonus < 20). This will result in 1 of 0.
    Since multiple values are going to be aggregated, don't forget to set the exception aggregation to the sum of the unique value, in this case Employee. Let me know if this works out or if you need any help.
    Kind regards,
    Alex

  • Dynamically displaying key figures in columns - BEx

    Hi all,
    I am working in BEx , My requirement is that ... out of two Variables (User entry) if i select one variable i need to get 4 key figures in out put . If i enter another variable i need to display only 2 key figures out of 4 in columns . I would appreciate if ant one could come out with a solution.
    With Regards
    Venkat

    Hi Venkateswara,
    Are you working in BEx Analyzer or BEx Web?  What version of BW do you have installed? 
    If in BEx Analyzer, follow this link ...
    Re: Where are the BEx variable stored
    After reading that posting, look at this one:
    Re: supress variable-entry-window (SAP-Exit)
    If in BEx Web ... sorry, you will need to find another expert.  But, there are even more API functions for Web reports than for Excel reports, so I am sure that what you want can be done.
    - Pete

  • Displaying key figures in workbook

    Hi,
    I added three keyfigures and one calculated key figure to the existing query. when opening the workbook which contains this query the added key figures are not displaying in the workbook. any settings should be made?
    thanks in advance.

    Hi Prasad,
    Refresh the workbook... this you can do by selecting any field in the workbook, right click on it and give refresh...
    Probably, by default the settings of your workbooks are in such a way that you are not refreshing the workbook on opening...
    This can be enabled by choosing the properties option which again you would get on right clicking on any one of the fields of the workbook. There, in the second tab, there'll be an option, "Refresh Workbook on Opening".. Choose that option so that everytime you open the workbook it automatically gets refreshed...
    Regards
    Manick

  • Bex report does not display key figures

    Friends,
    Need help urgently.
    We have a report of a multicube(MC1). key figures of one of the infocube(IC1) in the multicube(MC1) does not showup on the report.
    If reported independly on that IC1 it does show all values. This sounds really weird but its taking up all my time.
    Please friends, need your inputs on what else could have gone wrong.
    FYI...earlier we had same problem but creating new report on this multicube resolved problem. But this time, we have a new KF added to the infocube(IC1). But no change to the reports are made. Even though problem occurs.  I even transported all the rules, multicube and infocube.
    Please help me identify what could be the cause for it.
    -Raj

    Gupta,
    Thanks, this resolved my problem.
    But here;s another issue that came up now.
    I have a keyfigure (conversion factoor to EA) as attribute to master data infoobject (zmatnr). I have this included in the multicube. On the query, I have created a replacement path variable for conv. factor and this works well with all reports except this sales report which has key figures included from multicube(from multiple infocubes in muticube. Any idea what is that i am doing wrong?
    thanks

  • No display of currency - unit in bex

    Hi,
    I have a problem regarding currency translation - coversion. I have made a currency translation type from USD to EUR  with fixed target currency EUR. When I use the conversion in BEx query it works, but it does not show the currency unit EURO into the scaling factor.
    Does any body know how to solve the problem?
    THX
    Miha

    Hi
    Go to the BEx query designer and check query properties in the header of the query....find whether dispaly scaling factor is tick marked .....
    Assign points if useful
    Regards
    N Ganesh

  • Problem in displaying key figures in Bex

    User sees everything in Bex multiplied by exactly thousand in key figures
    Query is fine and other users also do not have any such problems.

    Yup.. cc.. u are correct..it divides by 1000..
    <b>'Query is fine and other users also do not have any such problems'</b> I did not read the above line properly..
    So could be something to do with the user changing in the Local view (or) That user is using a work book.. which is saved in that way..
    regards,
    Hari
    Message was edited by: Hari Kiran Y

  • How hide currency unit in BEx 7.0

    Hi,
    in my report I see the column values suffixed with the currency unit ex: 793,23 USD. How do I hide the "USD" in my report. I am working in BI 7.0
    thanks,
    sd

    Create a Formula Key Figure  (FKF) and use NODIM from the Data Functions for this and hide your original Key Figure (KF).
    FKF = NODIM (KF)

  • How to rearrange key figures for every row in a report

    Hi gurus,
    I need help in rearranging the key figures values( product sales for A, B, and C ) in the columns for each sales division row D1,D2,D3 displaying keyfigures in the order of descending sales volume for each division. The order of key figures has to change for each row.
    Is it possible through some user exits? Your help is appreciated.
    Thanks

    Hi,
    I am extremely sorry for my earlier post. I am not too sure about that. I heard that we can do RRI on Infoobject.
    Please look for other experts inputs. I apologise for that.
    Regards,
    Suman

Maybe you are looking for