Subject Gets Overridden
In my form, I specify the 'submit' email address and subject, yet when I test, a different subject ("submitting completed form") populates my outgoing email. I have the form set to manually collect responses, and my response file is on network server, as we do not have the Acrobat server. I would like to be able to set up a Lotus Notes rule based on subject to file these collected responses, but need to ensure the subject will not change. This is in Adobe LiveCycle, and I am a newbie. Thank you!
Similar Messages
-
Synaptics tapbutton settings keep getting overridden
Hi, my synaptics settings
cat /etc/X11/xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
keep getting overridden by some deamon to
TapButton2=3 and TapButton3=2
I am using xfce, but I have gnome-deamon running, but as per wiki advice I have
Run dconf-editor
Edit /org/gnome/settings-daemon/plugins/mouse/
Uncheck the active setting
And I don't know what else could be overriding my settings... I have temporarily solved it with script which runs synclient on boot, but that is only a workaround...Hi, I'm Jazzcat.
I've just installed and am trying Arch for the first time so my apologies if I've made a noob mistake here or miss out any required info.
I'm using KDE and have synaptiks installed. Config through the GUI works fine, but it fails to save settings when i reboot. Nothing jumped out at me in systemd. My best guess is it either doesn't have the appropriate permissions, or is getting overwritten by another daemon. I would greatly appreciate any assistance/ideas. I'll keep googling, but I'm kinda stumped on this one.
xorg.conf.d]$ ls
10-evdev.conf 10-quirks.conf 10-synaptics.conf
(I noticed here that unlike Cz-David I didn't have 10-evdev.conf.pacsave but I couldn't find any info on it.)
cat /etc/X11/xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection -
Mail Subject getting cut shorted
Hi frnds
In my mail subject i see that the subject is getting cut shorted like
"Contract Title 5600000422 Actual Spend is now 91" . I am only getting this message in subject but the original is some what bigger than this .
Is there any limitation to that .
Thanks
ROhitHello Rohit,
There was actually a limitation in previous releases, for external mails it is 50 characters. Check note 975947, it will solve your problem.
Regards
Andre Sousa -
Is there a way to temporarily disable the iPod within my iPhone. I am trying to stream music using an app and a dock on my Sony AIR and the stream is over ridden by the iPod starting up.
First of all, an idle threat is one that a person has no intention of carrying out. In the past 16 months that I have had this phone I have become less and less satisfied and found that it is like much of today's technology....over rated and under performing. The one thing that I have never been accused of is not wanting, or not giving help but when a company makes itself unavailable to resolve issues and leaves it to forums run by users helping users, it speaks more about the company than anything else they could do. As I said, I do not make idle threats and I did not threaten you in any way. Guess I'll call this topic done with as it is not and was not the intent to get a war started
-
I am unable to keep my hotmail account open. Several minutes after I have logged in, the hotmail inbox page diverts to an espn page. I have to completely shut down the entire page to get away from the espn site.
I have reset FireFox and I am still having the same issue.
This just started today. My hotmail account works perfectly in safari.hello lurch, just for reference, another user has reported the same issue on a windows pc: https://support.mozilla.org/questions/930290
could you please copy all the content from help > troubleshooting information and paste that into your next reply. thank you... -
Manual item category gets overridden by default item category
When I enter a manual item category for a material in a sales order, it gets overwritten by the default item category maintained in VOV4 (maintained for the order type and item category group. This is in ECC6. It is working in 4.7 though. How do we permit the manuaul item category to be entered and not get overwritten by default item category?
Hi,
You have not mentioned in VOV4, manual item category has been maintained or not. Can you check the values are maintained in those column?
Also in the debug mode, you can check whether any user exit is restricting this.
Regards, -
As stated above GOOGLE SEEMS TO BE CORRUPT.
Hi NLS,
I would like to verify if you apply the rule for your primary email address.
You can try to use the following cmdlet to achieve your goal.
New-TransportRule -Name 'New Rule' -Comments 'Comment' -HeaderContainsMessageHeader 'Received' -HeaderContainsWords 'olddomain.com'-FromAddressContainsWords
'[email protected]' -PrependSubject "OLDDOMAIN"
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Fix for CR for VS2010 bug: window name gets overridden
<h4>Problem</h4>
Crystal Reports Viewer initialization corrupts hosting window name by assigning "filter" value under IE or "opacity" under other browsers. It makes impossible to target this window for other operations - new window is opened instead.
Bug has been already mentioned in other threads and registered as ADAPT01530001:
[Crystal Reports Viewer VS2010 FRAME target issue|http://forums.sdn.sap.com/thread.jspa?threadID=1867945]
[crystal report viewer problem|http://forums.sdn.sap.com/thread.jspa?threadID=1893916]
Although it's still present in the latest CR for VS2010 support pack, version 13.0.2.
<h4>Reason</h4>
CR Viewer uses MochiKit JavaScript library v.1.4 for client operations, having bug in MochiKit.DOM.setStyle function (New.js):
undeclared name variable used, leading to window.name property assignments:
for (name in style)
<h4>Resolution</h4>
1. Fix MochiKit library to use declared name variable in MochiKit.DOM.setStyle function:
for (var name in style)
2. Or use latest MochiKit library v.1.4.2 which doesn't have this bug.
<h3>Question</h3>
When this fix can be applied and released for CR for VS2010 package?Thank you, Don,
Let's hope that CR development team will apply this simple but critical fix to SP3. Meanwhile
<h4>Following workaround can be used on pages with CR Viewer</h4>
Save window.name in the HEAD section and restore it in onload handler (with 0.5 sec delay - for rendering effects to be completed):
var windowName = window.name;
function onLoadHandler() {zetTimeout(function() {window.name = windowName;}, 500)};
It also makes sense to re-implement MochiKit.DOM.setStyle function in the same handler to avoid possible window.name corruption during further report processing.
<h4>CR installation can be also fixed</h4>
Update setStyle function source from Mochikit library package, kept in allInOne.js file in "inetpub\wwwroot\aspnet_client\system_web\2_0_50727(4_0_30319)\crystalreportviewers13" folder, to use declared name variable:
setStyle:function(A,B){A=MochiKit.DOM.getElement(A);for(var name in B)...}
(line 10, column 53540 in v.13.0.2) -
Need a way to avoid subject repetition in workflow notification's mail body
Hi,
In workflow email, subject gets repeated in mail body too. Couple of queries -
1. Is it possible to remove the repetition in mail body?
2. If not outright removal, can we at least decrease the font?
I got <af:panelHeader text="#{bindings.title.inputValue}" id="ph1"> in jspx page, but how do I restrict it to show title in body only in worklist and not in email. Can anyone share exact code snippet (using rendered/visible property) to be put here?
Thanks,
HarshHi;
Please refer below notes which could be helpful on your issue:
How to Create a Custom Notification Message for the Approval/Rejection Registration Process in Oracle iStore using JTF Approval? (Doc ID 1081864.1)
Custom Email Messages Fail in Workflow (wfmessage) (Doc ID 738894.1)
Regard
Helios -
RE: Getting ORA-01003: no statement parsed error
Hi,
It looks familiar to some of the error which I encountered before. The
situation was a for ... select loop without explicit begin/end transaction.
The reason given by Forte consultant is that:
The dbsession used by the for ... select loop needed to be locked by a
begin/end transaction otherwise, there may be chances that the dbsession is
being acquired by some other sql that unknowingly corrupted the cursor
implicitly built for that for ... select loop.
Hopes this help.
Regards,
Peter Sham.
-----Original Message-----
From: Robinson, Richard [SMTP:[email protected]]
Sent: Friday, April 16, 1999 12:12 AM
To: '[email protected]'
Subject: Getting ORA-01003: no statement parsed error
Any clues? We're getting the following error on a server side
object that
interfaces to Oracle:
SYSTEM ERROR: Select failed for SQL statement in project xxxx, class
yyy,
method ...
error from database is: ORA-01003:no statement parsed
Class: qqdb_ResourceException
Detected at: qqdb_OracleVendorInfo::DoOexfet
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Somebody asked nearly the same question Re: EMERGENCY! pl/sql syntax error!!!
-
Shatter - tops and bottom of picture gets cut off
When I use this slideshow the head of subject gets cut off when the subject is
close to top of picture. I have tried re cropping but it just makes it worse. Is there anything I can do to prevent this from happening.Welcome to the Apple Discussions.
The theme is designed to work with Landscape format pics. You will have issues if you use Portrait ones.
Regards
TD -
Get my IP address at runtime?
thanks for the input on the "lost RunCommand"...
Now, I need to pass my IP address to the Unix box so the DISPLAY Unix
environment variable is set properly.
How can I get my IP on the NT box at runtime?
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Sorry if this has already been answered...
You should also be able to get the IP Addr by using the GetDotAddress method
in an ExternalConnection class.
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of Wang, Tien
Sent: Thursday, November 05, 1998 10:08 AM
To: forte-users; 'Greg Gorham'
Subject: RE: get my IP address at runtime?
Hi Greg,
One way you can do it is to use the OperationSystem.RunCommand (and
capture the output)
1. c:\> set ComputerName
This should return you your computerName.
2. Once you have the computer name, you can use the Ping commnad to get
the IP address
c:\> ping myComputerName
You should get IP address.
Hope this helps.
Tien Wang
Indus Consultancy Services
(201) 261-3100 ext 236
[email protected]
www.indcon.com
From: Greg Gorham[SMTP:[email protected]]
Reply To: Greg Gorham
Sent: Wednesday, November 04, 1998 3:58 PM
To: forte-users
Subject: get my IP address at runtime?
thanks for the input on the "lost RunCommand"...
Now, I need to pass my IP address to the Unix box so the DISPLAY Unix
environment variable is set properly.
How can I get my IP on the NT box at runtime?
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> -
Please start posting subjects with "A1" or "K1"
Please when you post to this forum indicate in the subject whether you are discussing an A1 or a K1. I start my posts with "A1:" in the subject.. It helps since the tablets are so different, and information for one usually doesn't' apply to the other,
Thank you.
Moderator note; subject edited
IdeaPad A1-07
iPhone 3GSPerhaps you could alter the subject of this posting so A1 and K1 is in the subject -- get your point across for folks not likely to click on such a vague subject:
"Please start posting subjects with 'A1:' or 'K1:'"
...would be my suggestion for an altered subject of this posting... -
I want to use the method AVWindowGetTitle(AVWindow window, ASText text) to get the window's title, but it even cannot be built successfully. When building the project, it always says "AVTArraySize(_cdecl *)(AVWindow, char *, AVTbufferSize)': too few arguments for call". But it's explictly, I called AVWindowGetTitle but not AVTArraySize... In our SDK's samples, we also call AVWindowGetTItle, why it cannot pass in my code?
The purpose I get the title is Adobe sdk does recongnize pdf file name in Chinese, so I want to have a try to get the title of the window. If any other way we can get the Chinese name of the file, that would be better.
Thanks a lot.
Thanks
DanielYou don't mention what version of the SDK you are using with what compiler on what OS platform.
Acrobat 9 and X SDKs (which are the only ones supported at this time) work just fine with Chinese filenames. What API calls are you using that do not?
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 24 Nov 2011 05:00:01 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: get the window title?
get the window title?
created by aaaawerewedsv<http://forums.adobe.com/people/aaaawerewedsv> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4044745#4044745 -
I have downloaded ps cc in the Norwegian version. I then deleted the Norwegian Verson and will re installPerfect ps cc english verson. When I try to download ps cc again I do not get pressure on ps cc in creative clode distributions appear as updated What can I installation alert ps cc again ?
That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36)
Maybe you are looking for
-
Can I have two itunes accounts on one laptop
Can I have both my husbands and my account (2 seperate ids) on one laptop
-
The range of Airport Extreme is shrinking or so it seems. How can it be improved?
My Airport Extreme is behind one wall but the signal strength has become weaker over time. Is there any way to improve the signal strength? Thanks. Jay
-
Hi, I'm using Direct Input method to post documents for FB01. The date fields in header BUDAT and BLDAT has format yyyymmdd But FB01 transactions expects date field to be in format mm/dd/yyyy. I'm not able to assign directly any date of format mm/dd/
-
Adobe Reader: Error 2718
First, my automatic update for Adobe Reader X would consistently try and fail to update my software. This has been going on for weeks, however I experienced no other problems so I did not seek to download the newest version manually from the web. Tod
-
ITunes cannot connect to iPhone
when i plug my iphone 4 into my laptop and try to get on itunes it says "iTunes could not connect to iPhone "Brandon's iPhone' because an error occured while reading from this device." ~~what should i do?