Subject in result list

Hi!
How I can add subject to result list?
I try add tags with subject field after the author section in XSLT but nothing is happaned... Where I'm wrong?
Thank's!

<xsl:if test="author[.!='']">
<span class="author">
<xsl:call-template name="translate">
<xsl:with-param name="strKey" select="'AUTHOR'" />
</xsl:call-template><xsl:text>: </xsl:text>

<xsl:call-template name="process-hilite-attr">
<xsl:with-param name="str" select="author" />
</xsl:call-template>
</span>
</xsl:if>
<span class="subject">
<xsl:value-of select="subject" /><xsl:text> - </xsl:text>
</span>

Hello Roel,
The implementation you found is the standard...You are adviced to create a new Z implementation....
You can refer the standard implementation to figure out how to develop a new z implementation...
Also the documentation of this BADI gives enough clues as to how this badi can be used and implemented....
i dont have access to systems these days... i could have provided you with the code, if i would have had access to the system....
Inspire ppl by rewarding.....
Regards,
Anand....

Similar Messages

Can I customize the standard columns for the search results (list view) specifically?

When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".

re :When searching for emails
what method are you using?
Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
'''If you used the Global Search:'''
Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
Then a search is returned in a new tab.
You click on 'open email as list' - to open in a new tab.
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
If you only want to see eg: From and Date
click on the icon 'select columns to display' located to far right of header column name.
deselect Subject and Location
next time you run a global search then only those columns appear in the 'open email as list' view.
'''If via 'Edit' > 'Find' > 'Search Messages' ?'''
enter search parameters and click on 'Search'
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
Subject and Location cannot be edited.
Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
Any column headers you select will not be remembered if you close and later peform another search.
If you click on 'Save as Search folder'
This will create a folder in your Folder Pane and you can select column(s) you wish to display.
Any Column headers you choose to display are selected for that saved search folder.
The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
'''If using Quick Filter:'''
The QuickFilter type of search is done on the folder that is selected.
You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.

Error while adding a 'Ext No' field to Activities Search Result List on UI

Hi Experts,
The requirement is to add a new display field u2018External Nou2019to the activities SEARCH Result list.
At the moment activities are displayed with start date, end date and category, now the user want to display External No as well.
The details for that
Target:
Component:BT126S_APPT
View:bt126s_Appt/ApptSR
Context Node:BTQRACT
New attribute 'EXTERN_ACT_ID' to be added to the context node.
Source: component: BT125H_TASK
View: BT125H_TASK/TaskDetailsOV
ContextNode:BTACTIVITYH
Attribute:Struct.Extern_Act_Id
BOL Relation:
BOL ENTITY: BTQRAct
BOL Attribute: BTADVSAct -> BTOrderHeader -> BTHeaderActivityExt/EXTERN_ACT_ID
When i tried to added the attribute to the context node BTQRACT, it gave me the error 'method CL_BT126S_A_APPTSR_CTXT CREATE_BTQRACT DOES NOT EXIST.
please give me some inputs.
Regards
Krishna

Hi steve,
Still my issue was not resolved, could you help me to find the exact error.I have enhanced the component, view and context node, still i couldn't able to add attributes to the context node BTQRACT.I tried to add several fields, but it is giving the same error 'METHOD CL_BT126S_A_APPTSR_CTXT' CREATE_BTQRACT DOES NOT EXIST'. I have checked the OSS messages and found 2 relavant to this component. I have implemented both the Sap Notes 1363752, 1226612. Still after implementing the OSS note, i am getting the same error.My guess is one of the method is missing. Please help me out?
Regards
Krishna

How to change search result list entries?

Hi together,
I'd like to fit the TREX search result list to my own requirements. I've edit the Search Result Renderer Settings, Search Result Layout Set, Search Component Set and the Search Option Set. But that's not enough.
1.) I would like to display the relevant index name, in which the document was found.
2.) For special indexes (not for all!) I want to change the content link:
For example: if TREX is finding an xml-File in index "abc_index" I would like to change the content link from
"https://portalserver/irj/go/km/docs/folder/p76.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
and from
"https://portalserver/irj/go/km/docs/folder/p76_data.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
3.) I'd like to display a special part of the document as a explanatory text in the result list.
I think point 1 and 3 are possible with properties and HTML-extractors. But point 2 I'm afraid I have to create my own component.
But how to manage this? I cannot find any code snippets or tutorials or pattern to copy and develop further.
Is it possible or advised to write a WebDynpro? Are there other possibilities? I don't know how to start.
I would be pretty delighted to get any idea...
Thanks a lot
Steffi

Hi Stefanie
1) If you want to be able to show the name instead, you should write your own property renderer. Heres the link for the documentation: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c739e546-0701-0010-53a9-a370e39a5a20 -> How to Implement Flexible UI
Components -> Property Renderer
2) Documentation will be send in a matter of minutes.
3) I also think the web property extractors only work with the web repository manager, because as far as I know that is the only repository manager, where you can select a web property extractor upon creation. I guess you could open an OSS to SAP and ask if its not possible to extract properties in your scenario just to be sure if its not possible. But my guess is that you either have to develop your own repository manager or publish your files on a web server in order to meet your requirements.
Best regards,
Martin

Result table data to be populated based on selection in the result list

Hi,
We have a parent data source "P" containing all the record types. Further we have two child data sources each having filters on exclusive record types(for ex. child1 containing record types X, Y, Z and child2 containing record types A, B).
In our page we have a result list associated with data source child1(record types X, Y, Z) and result table associated with data source child2(record types A, B). There exists common attributes among the attributes present in result list and in the result table.
Rest of the containers in the page namely search, breadcrumbs, guided navigation point to the parent data source("P") containing all the record types.
Whenever we select a value from the guided navigation using the common attributes both the result list and result table are getting filtered.
What we require is that, whenever an attribute(common attribute) is clicked in the result list, the data in the result table needs to get filtered based on the value of the attribute that is clicked.
Is this possible? If so, pl. suggest how.

Take a look at the Studio release notes for EID 2.4 http://docs.oracle.com/cd/E35976_01/studio.240/RELNOTES.txt a lot of little bugs like the one you describe have been resolved. If you haven't already done so you should upgrade to 2.4.

How to get latest record on top of the result list

Hi Gurus,
How to get latest record on top of the result list when you open the record.
saved data method in BT120H_CPL of OverView page and result list in ICCMP_INBOX.
Regards,
Ravi

Hi
Try sort descending by on fileld "changed at ".
manipulate the sort depends on your requirement
Regards
Logu

Different Color Text of Topic Titles by Child Project in Search Results List

Does anyone know how I can change the text color to indicate the source project of a topic as displayed in the Search Results list?
I have followed Peter Grainge's directions for setting up a parent project that has several child projects, one of which contains outdated version-specific information. Thanks, Peter!
I would like it to be obvious to the user before they open a topic from the Search Results list that it is from the old legacy project.
I have found where the font is set, (thanks to the RoboWizard), but I am not a Javascript programmer and am uncertain how to code the "if document is from this project, then use this font" logic.
I would also like to put a "caption" below the "Search Results per page" line to explain the purpose of the color change.
I am using RoboHelp HTML 8.0.2. I generate WebHelp output which is then FTP'd to our server.
Thanks in advance!

Hi Leon,
     Let me make sure that I understand your suggestion - I should change the title of each topic in the "legacy" knowledge base so that they each include a short identifier, such as "First Topic - Legacy"? If so, I suppose that would work, but I'd have to change 1,000 topics. The topic titles would no longer match the filenames (I'm trying to freeze changes to the old knowledge base to which there are many links from our user forum), which I suppose is not a big concern at this point. I'll run some tests.
     That has also raised another question in my mind, but I'll post that separately. It's about the way Robohelp selects the text that is shown immediately after the title of the topic in the Search Results list.
     Thanks for taking the time to help!

IBase search result list not showing in Account Identification

Hi Gurus,
I'm new to CRM and we have an upgrade issue. We just migrated to EHP3 for SAP CRM 7.0. After the migration, the installed Base result list is not showing in the Account Identification screen. We have the requirement to show the installed base on the right side of the confirmed account and also the result list in case the customer have multiple equipments. The first part is working correct and it shows the data if there is only one equipment with the customer. But in cases where there are more than 1, the installed base view shows blank and also the result list does not show. Instead the Interaction History is displayed. I have checked all the forums and the config and it all looks correct. Here is the list of config that we have
1) I have the Account Identification Profile created and assigned the Object Component 'ICCMP_IBASE' to it with Auto Search checked ON. This I believe is for the IBase Details which is working fine for single equipments.
2) Function Profile 'BPIDENT' with value of the Account Identification Profile has been assigned to the Business Profile.
3) The Installed Base Profile 'DEFAULT_TREE' has been updated to UNCHECK 'Display Tree' as we want the result list.
4) Function Profile 'IBASE' with value 'DEFAULT_TREE' has been assigned to the Business Profile.
Am I missing something? The exact same config works perfectly in a box that has not yet been upgraded. Any help would be appreciated...

Hi,
I tested this issue and I can reproduce it in my environment. However, as far as I know, this behavior won't affect the usage of the address book.
I searched the internal resource but I cannot find a bug report regarding this issue. If you have any suggestion about this issue, you can submit a feedback via:
http://office.microsoft.com/en-US/suggestions.aspx
Best Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Add column to my tag result list

Hi experts,
In our new service desk tool (crm_ui), we want to add a column to a result list, but I haven't a clue how to add it.
What we do is: we tag certain incidents with a term, and then we follow them up by adding the 'tag' widget on our start page.
When we click on a certain tag that we used multiple times, we see a result list.
But we only see two collums in this list: "operation number" and "description".
How to add a third column: "status"?? I cannot find it anywhere in our viewconfiguration. There are no available fields with this label for the ZSOLMANPRO role.
thx

Hello Kenny,
It is quite complex and you might not be able to archieve it by your own. It is not an ABAP-view. The steps wouold be like that:
1. Open you view (screen) in WebUI (CRMUI).
2. Click on an editable field or hyperlink in the view and press F2 until you get a popup.
3. Read which component and view this is.
4. Go to transaction BSP_WD_CMPWB and enter your component from step 3 and select the right view.
5. Check in the configuration (the right one as shown in the popup of step 2) if you can add a field. I thought you already did that but eventually you did not.
6. If the right field is not available you might try to add the attribute to the context node but this is more complex.
Eventually steps 1-5 are already enough. All of this is WebUI configuration and if you looked your your view in SM34 it might indicate that you are not really familiar with it. So be careful.
Best regards,
Thomas Wagner

Add Contact's Email and Phone to the Lead result list on WEB UI

Hello All,
My requirement is to add Contact's Phone number and Email on Lead result list.
Technical details:
BT108S_LEA(Comp)
BT108S_LEA/Result (View)
RESULT (CN)
I have enhanced context node ' Result ' and added new field through wizard (Ex: ContactPhone) using following details.
add model attribute:
BOL entity: BuilContactPerson
BOL Attribute: TEL1_NUMBR
After the successful creation, i added ContactPhone field from available fields to display fields.now i could able to see the newly added field on Lead result list.i see message 'BTPARTNER not bound' under telephone colomn for each record.
Can we add these two fields from standard BOL structure and use it , so that no coding required, system will take care of data retrieval?
or should i go with adding custom fields and write logic to get the data for each lead's contact?
please help me with approach and on above error.
Thanks
Gangareddy

Hi Ganga,
Since these fields are in a table view, its not possible to bind them with the standard BuilHeader BOL Object. Hence, we need to write the custom logic for these methods.
You have two options here.
Option 1:
Add the fields in the result structure and modify the Genil Search class logic and replace the standard GENIL class with custom class.
Option 2:
Create the custom attribute directly in the BOL structure and write the custom logic in getter method.
Hope this helps.
Thanks
Vishal

Add hyperlink on the field txt in Search Result List to access Detail View

Hi, SDN fellows.
I have a PCUI requirement stated the following:
1) In the line item of the Search Result List (table), there is one hyperlink in field 1.
2) When click on the hyperlink, it will trigger the action to open up Detail View (Object Data Pattern 1 - ODP1) of the line item.
3) Problem: When the value of the field is null, there will be no hyperlink to open up the Detail View.
4) For work around, my requirement is to make the other fields (i.e. field 2) to have a hyperlink to trigger the action for opening the Detail View of the line item.
I am not strong in PCUI. Please advise how to do so, while I am exploring the guide in the PCUI Book.
Thanks,
Kent

Hello Kent,
check out the settings of the Field Group element where the link is already active. Copy that settings to the Field which you want to be linked too.
Regards
Gregor

Passing result list from Contact search to Target group

Hi,
I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow.
Note: Here the contact structure is different in each component.
Thanks.

Yes Srikanth, you need to bind context of result list to SEGED_TG using component controller binding. Let me know if you have questions.
But the question is did you make a navigation from the contact search result to target group creation or is it a standard functionality ?
As per my knowledge we can navigate from Profile set creation creation screen or from Trade Promotions.

How to add a new field to an existing Generic Search result list?

Good day,
I'm new to the concepts of the Generic Search Framework. I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C". This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
From the *modification\generic-searchbackend-config.xml file, the existing
<h4><property-group name="billing_resultlist_B2B_R3">
<property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
<property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
<property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
<property name="CURRENCY" type="hidden" />
<property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
<property name="PAYERS_GUID" type="hidden" />
<property name="SD_DOC_CAT" type="hidden" />
<property name="OBJECTS_ORIGIN" type="hidden" />
</property-group>
</h4>
I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework. I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified.   How it is specified to be a part of the result set?
After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
I would greatly appreciate any help.
Thanks,
_kevin

Hi Kevin,
this means you are working in this section of the generic-searchbackend-config.xml
             <property-group name="SearchCriteria_B2B_Billing"
                             useSearchRequestMemory="true">
Below this property
                <property name="IRT_BDH_BILL_TYPE"
                          type="box"
                          entityType="BEART_BILL_TYPE"
                          tokenType="EXP"
                          requestParameterName="rc_documenttypes"
                          label="gs.att.lbl.doc.type"
                          UIJScriptOnChange="GSloadNewPageR3(this);">
                    <allowedValue value="ORDER"           description="b2b.status.shuffler.key1val2"/>
                    <allowedValue value="QUOTATION"       description="b2b.status.shuffler.key1val1" />
                    <allowedValue value="INQUIRY"         description="b2b.status.shuffler.key1val11" />
                    <allowedValue value="ORDERTMP"         description="b2b.status.shuffler.key1val3" />
                    <allowedValue value="CONTRACT"        description="b2b.status.shuffler.key1val4" />
                    <allowedValue value="INVOICE"         description="b2b.status.shuffler.key1val5" default="true"/>
                    <allowedValue value="CREDITMEMO"      description="b2b.status.shuffler.key1val6" />
                    <allowedValue value="DOWNPAYMENT"     description="b2b.status.shuffler.key1val7" />
                    <allowedValue value="AUCTION"         description="b2b.status.shuffler.key1val9" />
                </property>
please try adding this new property
                <property name="DOCUMENT_STATUS(1)"
                          entityType="CL_CRM_REPORT_SET_STATUS"
                          tokenType="RAN"
                          type="hidden"
                          requestParameterName="rc_status_head1" value="C" />
This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !
Philipp Koock
SAP CRM Web Channel Consultant
http://www.koock.net

How to Enhance search help for product groups. Currently no ability to add multiple lines from result list

Hi All,
In CRM Web UI, there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under “Product” tab=> Product Group ID field.
Web UI Component Details -
UI component : TPMOE
View : TPMOE/ProductEOL
Context: PRODUCT Attribute : -PRODUCT_GRUOP
Click on Product Group ID field then below F4 Help screen appears.
In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
Current technical design for Product Group F4:
a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1” is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
Requirement :-
In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
System should query for products with all selected product group, transferred to product list tab.
Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
Can we enforce same behavior like DDIC search help in Web UI too Or suggest how we can achieve this requirement?
Thanks in advance
Regards,
Arjun

Hello All,
We have achieved this requirement by Custom development and approach followed as -
Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT
Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
e. Called F4 application for field product _group with help component usage created in step d.
Regards,
Arjun

Adding columns to result list in inbox view of web client

Hi,
I have a requirement to display custom columns in result list of inbox view of web client. I copied the view and controller to custom name space. In BSP_WD_WORKBENCH , for AUIITEM view, there are two context nodes . AUIITEMTREE is one of thena and has tree structure and under it tree node proxy. Tree node proxy has attributes, I can not add more attributes to Tree node proxy in work bench. Would you please any one suggest the approach to solve this problem.
Thanks in advance.
With regards,
Ravi Kumar

Hi Ravi,
Have u got solution for ur problem.I have got same requirement.
As per my requirement I need to search for Sold To Party for all category and display it in AUIITEM.
Please provide with some inputs .
Regards,
Vikas

Subject in result list

Similar Messages

Maybe you are looking for