Subject line "another option" prevents message from sending

I recently attempted to send a message (in Mail version 3.5) with the subject line "another option", and the message did not send, went to the outbox, and opened again. I assumed my connection was down, but then I tried again with a different subject line and it worked.
A bit of fiddling demonstrated that all of the following work: ".another option", "another optionasjkdflajdlfk", "another option askfljd", "another option" (2 spaces). In short, it seems that only this specific subject line causes the message to not send.
This is obviously not a big problem; I ended up simply using a different subject. But I am curious to find out why this is the case.

The header is being "folded" as described in RFC 2822 section 2.2.3.
The folding doesn't lose the space if unfolding is done properly.
Perhaps the recipient mail program isn't handling unfolding properly?
If so, please report the bug to the owner of that program.
If you need to work around such a buggy program, you can set the
System property "mail.mime.foldtext" to "false" to disable all folding
in JavaMail.

Similar Messages

  • Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main  Dell computer and my Iphone. Any ideas?  Duanekot

    Overnight, the taxt body of emails will not display for all messages in the inbox.  Only the From and To and a subject line display.  All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully.  Any ideas?? Duanekot

    See if this helps .... Reset the iPad.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

  • My iPhone 4S is preventing me from sending text messages and making or recieving phone calls, any suggestions on how to rid of this problem?

    My iPhone 4S will not recieve calls or text messages. It also prevents me from sending calls or text messages. I have had my SIM card double checked for verification on the phone listed and had several visits to my Bell provider. Any tips or suggestions?

    The iphone is designed to lock the screen when it is next to your face.
    If it is not locking when it is against your ear, then try basic troubleshooting: Restart,reset, restore
    Unless you have a case on it. If you have a case, then remove the case and see if that solves it.  Otherwise, try basic troubleshooting.
    If all fails then make an appointment at the local genius bar or call Apple support to arrange from a replacement.

  • Change mail message from sender before forwaring message

    How can I change/adapt the orignal message from sender before replying or forwarding

    In what way, like edit the original message?
    You cannot, from within the native software.
    You'll need a third party application such as ForwardWithEdit to do so, and that can be found in the Fixmo Tools application... for one place.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Supress/Prevent messages from FM call

    Hi all,
    In my program, I have a function module call,
    during an error inside the FM, an Information message pops up.
    I'd like to stop this from happening.
    The FM is not RFC-enabled so I can't use 'IN BACKGROUND TASK'.
    Also, Im not allowed to change the FM
    nor am I allowed to create a copy of the FM (...then change the message).
    How can I prevent messages from showing or popping up?
    Can I use a variation of MESSAGES INTO or something else.
    Is there a way to hardcode setting to run in background?
    Or atleast any ways to suppress/prevent messages from the FM.
    Thanks all!

    when calling the FM adopt your call with following exception:
    error_message = any free number, e.G. 9.
    That will have following effect:
    If the error_message addition is specified after EXCEPTIONS, all MESSAGE statements that are executed during the processing of the function module and do not have the RAISING addition are affected as follows:
    Messages of the type S, I, or W are not sent but are noted in the log background processing.
    Messages of the type E and A trigger the exception error_message and set sy-subrc to n_error. The message class, message type, message number, and the contents of possible placeholders for the MESSAGE statement are in the fields sy-msgid, sy-msgno, sy-msgty, and sy-msgv1, ... , sy-msgv4. With messages of the type A, the ROLLBACK WORK statement is also explicitly executed.
    Messages of the type X are not influenced. As always, they cause program termination with a short dump

  • Messages from sender being overwritten by another in my inbox- why?

    I am missing messages from senders because they are being overwritten by messages from another sender when they get to my inbox. The original sender is listed in the header as "From", but the rest of the info in the header is for the other sender. Both senders are expected (both are newsletters). This happens randomly and has been happening for a couple months. Any ideas on what is happening?
    Update: This is continuing to happen as of today ( 19-Nov-2014). One message was downloaded and filtered to one of my local folders correctly, but then it also overwrote another message currently downloaded in my inbox, but left the Thunderbird inbox 'from' and 'subject' fields intact indicating the sender of the message that it overwrote in my inbox. But when I open it, I get the same newsletter that was filtered to the folder (in the same download batch) as the newsletter that opens in my inbox with the sender/subject of the other newsletter. This is very frustrating... I'm considering alternative to Thunderbird.

    Hi,
    I'm with Russ. This sounds ugly and I've never seen it before. However, there is another interesting thing that happened to someone else in 9.0.4 version recently where the workbook was owned by one owner, shared to another, a modification made to the workbook by the shared to userid. The original workbook accepted the change. It sounds like this was caused by IDENTIFIER issues. Could it be possible, (improbable I think), that the IDENTIFIER on each worksheet is the same? I don't know how this could happen but I bet a million dollars once (that I don't have) that the workbook situation couldn't happen. To check this, right click on each worksheet name and checkout the IDENTIFIER. I also think you should log a SR. It would be nice if you would post the resolution here once one is found.
    The workbook issue has been logged as bug 7565438 . (problem identified by stephen lee)
    Thanks for sharing an interesting issue!
    Nancy

  • Somehow accidentally hid the To/From/Subject line headers on individual messages.

    In trying to change some individual display settings, I somehow managed to turn off the header for the To/From/Subject line fields on emails when you open them in a new window. It only affects emails you open from the inbox to read in a new window. Hitting forward or reply or opening a new message to compose still works.
    I am honestly not sure what this section is called, which is presumably why I can't figure out how to un-hide it.
    Thanks!

    In trying to change some individual display settings, I somehow managed to turn off the header for the To/From/Subject line fields on emails when you open them in a new window. It only affects emails you open from the inbox to read in a new window. Hitting forward or reply or opening a new message to compose still works.
    I am honestly not sure what this section is called, which is presumably why I can't figure out how to un-hide it.
    Thanks!

  • Subject line 'space' character is lost when sending mail?

    Hi,
    I'm using JavaMail, and when sending a mail with a subject line that is longer than 62 characters, the last space before the 63rd character becomes a linefeed. This means that when the recipient receives the e-mail, the space in the subject line is actually dropped (becomes a linefeed).
    For example. I send an email with the following subject line: "New User Setup [ITNUS-0005] User Setup Progress Report for: Louise Gans".
    The recipient will receive the following subject: "New User Setup [ITNUS-0005] User Setup Progress Report for: LouiseGans".
    Note the missing space between "Louise Gans". Perhaps someone could test sending out that subject line, and see if they get the same problem?
    Looking at the message source on the recipient client, it shows a line feed / new line where that space is supposed to be.
    Using MS Outlook or GroupWise or another mail client, the subject lines gets sent through perfectly using the same mail server (Groupwise Internet Agent 7.0.3), but using JavaMail to send the mail through that mail server gives me the space problem.
    Can anybody shed some light on why this is happening? I would really appreciate the help.
    Here is an example of the code I am testing with:
    public class SendHtml {
         public static void main(String[] argv) {
              new SendHtml();
         public SendHtml() {
              String  to = "[email protected]";
              String subject = "New User Setup [ITNUS-0005] User Setup Progress Report for: Louise Gans";
              String from = "[email protected]";
              String cc = null;
              String bcc = null;
              String url = null;
              String mailhost = "mail.server.co.za";
              String mailer = "sendhtml";
              String protocol = null, host = null, user = null, password = null;
              String record = null;     // name of folder in which to record mail
              boolean debug = false;
              BufferedReader in =
                   new BufferedReader(new InputStreamReader(System.in));
              try {
                   Properties props = System.getProperties();
                   if (mailhost != null) {
                        props.put("mail.smtp.host", mailhost);
                   // Get a Session object
                   Session session = Session.getInstance(props, null);
                   // construct the message
                   Message msg = new MimeMessage(session);
                   if (from != null) {
                        msg.setFrom(new InternetAddress(from));
                   else {
                        msg.setFrom();
                   msg.setRecipients(Message.RecipientType.TO,
                             InternetAddress.parse(to, false));
                   if (cc != null)
                        msg.setRecipients(Message.RecipientType.CC,
                                  InternetAddress.parse(cc, false));
                   if (bcc != null)
                        msg.setRecipients(Message.RecipientType.BCC,
                                  InternetAddress.parse(bcc, false));
                   msg.setSubject(subject);
                   collect(in, msg);
                   msg.setHeader("X-Mailer", mailer);
                   msg.setSentDate(new Date());
                   // send the thing off
                   Transport.send(msg);
                   System.out.println("\nMail was sent successfully.");
                   // Keep a copy, if requested.
                   if (record != null) {
                        // Get a Store object
                        Store store = null;
                        if (url != null) {
                             URLName urln = new URLName(url);
                             store = session.getStore(urln);
                             store.connect();
                        } else {
                             if (protocol != null)          
                                  store = session.getStore(protocol);
                             else
                                  store = session.getStore();
                             // Connect
                             if (host != null || user != null || password != null)
                                  store.connect(host, user, password);
                             else
                                  store.connect();
                        // Get record Folder.  Create if it does not exist.
                        Folder folder = store.getFolder(record);
                        if (folder == null) {
                             System.err.println("Can't get record folder.");
                             System.exit(1);
                        if (!folder.exists())
                             folder.create(Folder.HOLDS_MESSAGES);
                        Message[] msgs = new Message[1];
                        msgs[0] = msg;
                        folder.appendMessages(msgs);
                        System.out.println("Mail was recorded successfully.");
              } catch (Exception e) {
                   e.printStackTrace();
         public void collect(BufferedReader in, Message msg)
         throws MessagingException, IOException {
              String line;
              String subject = msg.getSubject();
              StringBuffer sb = new StringBuffer();
              sb.append("<HTML>\n");
              sb.append("<HEAD>\n");
              sb.append("<TITLE>\n");
              sb.append(subject + "\n");
              sb.append("</TITLE>\n");
              sb.append("</HEAD>\n");
              sb.append("<BODY>\n");
              sb.append("<H1>" + subject + "</H1>" + "\n");
              sb.append("</BODY>\n");
              sb.append("</HTML>\n");
              msg.setDataHandler(new DataHandler(
                        new ByteArrayDataSource(sb.toString(), "text/html")));
    }

    The header is being "folded" as described in RFC 2822 section 2.2.3.
    The folding doesn't lose the space if unfolding is done properly.
    Perhaps the recipient mail program isn't handling unfolding properly?
    If so, please report the bug to the owner of that program.
    If you need to work around such a buggy program, you can set the
    System property "mail.mime.foldtext" to "false" to disable all folding
    in JavaMail.

  • How can I prevent Messages from opening?

    Hello,
    I was a user of the Messages beta on Lion, and while it had its flaws, I was mostly happy with how it operated.  While it sometimes failed, it never bothered me unnecessarily.
    Since upgrading to Mountain Lion, though, I find that Messages will open every time I receive a new message from my wife.  I am not leaving the program open -- I quit after I send a message, and don't have an IM account set-up.  I only ever use it to send a message, then quit.
    This is annoying because Messages sometimes hangs when I open my laptop up, trying to catch-up and collect a conversation that occured on, say, my phone.
    I'd like to keep the app on my computer, but would like to keep it closed unless I prompt it to open.  I assumed there would be a preferences option for this, but if there is, I cannot find it.
    Any thoughts on what I can do to prevent this behavior in the future?
    Best,
    John

    Yes, I'm surprised too.  Makes me worry that this is either (a) really simple and we're overlooking it or (b) not yet possible to correct in new OS.
    Anyone out there want to put our minds at ease?

  • School iPad - Prevent student from sending PDF in iBooks

    I am desperate to disable the option of sending PDF files from inside our Student's iPad device.
    We badly need to prevent our cadets from sending our Aviation Charts & documents (that we developed in PDF format) to external entities.
    If only there is an option in the restriction menu to disable such option. The thing is every student has their school gmail account in their iPad.
    These security issue really poses a big threat to our iPad implementation.
    Hoping for such feature to be available in the future specially for companies and school like us.

    if this is a feature you would like to see implemented then you need to let Apple know as these are user-to-user forums that Apple does not monitor. http://www.apple.com/feedback/

  • Prevent users from sending emails to wrong users

    Hi
    I was looking for a possible way of stopping users from sending emails to the wrong person.
    Wonder if this can be achived by group policy or creating rules and alert.
    What im actually looking for is when the user is about to send out the email they get a pop up message saying you about to send email to such person would you like to send now?
    hoping there is some sort of a solution for these problem :)
    cheers  

    Yes, some more details please.
    The closest thing I can think of is (in Exchange 2010 - no available in 2003 or 2007) is Mailtips:
    http://technet.microsoft.com/en-us/library/dd297974.aspx
    But I'm not sure that's quite what you're looking for.
    And how could any software know if the person is the right person?
    It would have to read the person's mind and realize they are about to make a mistake by sending the message to X instead of Y.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.
    Hi Le Pivert,
    I can understand your opinion an outlook will have to be that smart to realize that the email is about to be sent to a wrong person.
    What i was look for is something like a pop up notification when click on send it has a pop up message saying you are about to send this email click yes or no to cancel.
    Something like when receiving emails outlook sends the notification.
    I guess the above cant be achive through the outlook may have to be a third party software it there is any.
    Cheers
    KB
    I would look at these offerings if you are looking at Outlook Add-ins
    http://www.slipstick.com/addins/auto-process/special-function-automatic-message-processing-tools/
    If you thinking about server side solutions, Exchange has mailtips, hub transport rules, moderated groups etc... And of course 3rd party stuff is out there as well.

  • How to prevent iCal from sending invitations

    After receiving an invite for dinner to my brother's home I used Siri to set up the "Appointment" on my iPhone 6 plus.  I then received a phone call from my brother asking why he received an email from me confirming an "Appointment" for dinner.  How do I stop the Calendar from sending these email invitations. 

    Hello Vtgolfr, 
    Thanks for visiting Apple Support Communities. 
    It sounds like the Calendar event that you created on your iPhone included your brother's email address. Before saving an event in the future, you may want to check the invitee field to see if his email is being populated by Siri when you create a calendar event.
    You can find more information about Calendar invitations in the iOS 8 User Guide:
    Invitations - iPhone
    Best Regards,
    Jeremy

  • HT204053 how do we stop Messages from sending to 2 phones

    I am having diffuctly trying to figure out why me and my daughter are sharing same message
    I send a text and then it sends to her phone as well and sends back to my phone

    Welcome to the Apple Community.
    it can be resolved by making sure you each have different information in settings > messages > send and receive, however you would be much better each having your own iCloud account.

  • TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

    I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

    Make 3 different iCloud accounts and use ONLY for iMessage.   That will permanently fix your issue.

  • Prevent SRW2008P from sending EAP Success message on connect

    Hello,
    I have a SRW2008P switch which is sending a EAP Success message when a device is connected to it.
    How can I disable this? EAP / 802.1x is golobaly disabled on the switch.
    I need to connect a cable modem to the switch in a seperate VLAN. The cable modem is configured by the provider only to allow one client. So as soon as I connect the cable modem to the switch the switch sends out an EAP Success message to it and the cable modem locks the MAC address of the switch. The router behind the swich can there for not connect to the modem as the modem has already locked the MAC of the switch instead of locking the MAC of the router.
    I have attached a picture of a wireshark capture while connecting my notebook to the switch.
    Thank you, Artem

    Jarnathan,
    The are several tricks and methods to help with this problem, but they do not involve Rules.
    In the Mail Preferences/Composing you can check a box beside Mark addresses not in this domain, and type in your "somebigcompany.com" domain name. In this mode any address not in that domain will be marked in red, including your From address displayed in the Compose window as you draft.
    Secondly, in the same Composing preferences, your can select one address as the default for all New messages (but this will not apply to Reply or Forward.
    However, instead of selecting one default New message address, you can click to turn the small black triangle downward, thus expanding your Inbox to show the Inbox of each account, and work in one account at-a-time. In this mode, all new messages will be defaulted to be from the address of that respective Inbox.
    Ernie

Maybe you are looking for