Subject: problem weblogic 6.0 after os upgrade to solaris 2.8 from solaris 2.6

I have upgraded solaris 2.8 from 2.6 using weblogic 6.0 problem compiling

Anil,
What errors are you getting ?
Thanks
Jignesh Patel
[email protected] (Anil Sharma) wrote:
I have upgraded solaris 2.8 from 2.6 using weblogic 6.0 problem compiling

Similar Messages

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer

[SOLVED]Problem with logging in after system upgrade

Hi,
I'm encountering some problem after rebooting my machine just after last upgrade. Few minutes ago I was sure I found the source of the problem when system hang on "Reached target Graphical Interface" message. Reason - nvidia drivers had to be replaced with legacy version (https://www.archlinux.org/news/nvidia-340xx-and-nvidia/). But it didn't help. Also it made things a little bit worse. Because now my system uses nvidia-340xx and it seems drivers are fine but when login screen of lightdm should appear screens stay blank... and nothing happens. I simply can't do anything.
What I noticed is also xfce4-session was upgraded (4.10.1.3->4.10.1-5) and maybe this is the separate problem? but I can't downgrade this package as some time ago I removed all contents of /var/cache/pacman/pkg.
What I have is arch on pendrive so I can chroot into existing system.
Any ideas?
Last edited by jakub (2014-10-08 22:09:02)

I found something similar to line
(EE) Mar 07 14:05:07 NVIDIA(0): WAIT: (E, 0, 0x837d, 0)
these values are not exact as I'm too tired now to rewrite the real ones from screen
maybe I should install some older nvidia drivers (these 340xx are broken somehow I think). Unfortunately I don't have my /pkg content anymore.
Where can I download packages like nvidia-340.32-1-x86_64.pkg.tar.xz from? (according to pacman.log I had this version back in July and it was working fine I think).
I could also start X with Nouveau drivers but not xfce (anyway I would like to install old nvidia drivers back)
Last edited by jakub (2014-10-08 22:03:11)

Problem in Predefined Properties after SP14 upgrade

Hi,
we are facing one Problem after the SP14 upgrade in the Development environment.The Problem is as follows:
Actually we have defined some Predefined metadata Properties which give us option of country and Locality while uploading any Document.The Property of Country and Locality are Interlinked and whenever user check the country checkbox (Like China) the interdependent Locality List appears (like Shanghai).But after SP14 upgrade whenever we are clicking the country checkbox the Loclity checkboxes are not appearing.(Even though some processing happens).I have checked all the configuration under System admin >Global services> Property Metada -->Group and Properties.Property Structures -->Property Groups etc and match them with all the properties of that in the Production environment.But we don't find any property missing like Dependencies etc.
Is there anything else we need to check?Anybody of you have faced the same Problem earlier?
Please Help It is urgent
Regards
Imran

Dear Imran,
we dint migrate the properties to the new server.
we have created those properties again in our new server.
I am using those properties for two purposes
1.to refine the search ,adding them in the search option set.
here i am able to see the all properties and there dependedncy .
its working fine.
2. while uploading the documnets.
I created a metadata group mapped those properties to all groups.
all process as we have done in our old server.
here i am able to view all the properties except 1.
for ex country and city
I am able to see the property country ,
but the property city is not visible only .
where as i can see both the properties in search and working as desired .
If the problem is with patch,then it should either not work in the search also.
can u please suggest me on this .
Thanks in advance
Regards
swetha pola

Problems with loading mailbox after GW8 upgrade

I just recently upgraded to Groupwise 8 in a school district. I support many school districts and this is the first time I've had this problem. Users are complaining that from outside the network(home access) that when they log in to web acc, the mailbox will just hang at "Loading...."
The toolbars, menus, and folder list all display properly, but it hangs trying to load the message list for the mailbox. It works fine when on the internal LAN, only happens from home. And the problem is not constant - sometimes it will work, sometimes it will not. I've had users complain about the issue from the entire spectrum of web browsers, from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp internet files and still have the problem.
I do see a java error on the logger screen, I'm not sure if its related:
com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
The only reference I could find to the above error on these forums(or anywhere for that matter) was in the following thread:
http://forums.novell.com/novell-prod...unloading.html
Which doesn't describe the problem I am having....
Has anyone else seen this problem or have an idea what to check?
Thanks in advance for any help
-Rich

John Cunningham wrote:
> I'm getting exactly the same error after my upgrade from 7.0.3 to 8.0.1.
> WebAccess 'kinda' works: you can log into it but there are java (Tomcat,
> I presume) errors on the console:
>
> Novell GroupWise WebAccess
> Version 8.0.1
> (C) Copyright 1993-2009 Novell, Inc. All rights reserved.
>
>
> <GroupWise WebAccess> WebAccess Servlet is ready for work
> Sep 4, 2009 6:45:49 PM org.apache.jk.common.ChannelSocket init
> INFO: JK: ajp13 listening on /0.0.0.0:9010
> Sep 4, 2009 6:45:49 PM org.apache.jk.server.JkMain start
> INFO: Jk running ID=0 time=0/85 config=null
> com.novell.webaccess.providers.gwap.GWAPException at
> com.novell.webaccess.providers.gwap.XGWAP.xlatAvai lableDictionaries(U
> nknown Source)
> at com.novell.webaccess.providers.gwap.XGWAP.xlatMess age(Unknown
> Source)
>
> at com.novell.webaccess.providers.gwap.XGWAP.itemRead (Unknown
> Source)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.
> java:39)
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAcces
> sorImpl.java:25)
> at java.lang.reflect.Method.invoke(Method.java:324)
> at
> com.novell.webaccess.providers.gwap.XGWAP.dispatch ServiceHandler(Unkn
> own Source)
>
>
> . . . you get the picture.
>
> I've re-installed the WebAccess Application from scratch, no diff.
>
> Users can log into it, but when they open a message they get a dialog
> box "Unable to process request. Please contact your system
> administrator." Then it displays the email message but it does not mark
> the messages as read in the main browser window.
>
> Besides that, Tomcat has crashed on me and hung completely, requiring me
> to reboot the server.
>
> I've spent a lot of hours trying to get this resolved.
>
> The WebAccess agent is on another (clustered) node. The WebAccess
> Application is installed on a single NW65SP7 server (i.e. not clustered).
>
> Any suggestions would be greatly appreciated.
>
>
> rpf2 wrote:
>> I just recently upgraded to Groupwise 8 in a school district. I support
>> many school districts and this is the first time I've had this
>> problem. Users are complaining that from outside the network(home
>> access) that
>> when they log in to web acc, the mailbox will just hang at
>> "Loading...."
>>
>> The toolbars, menus, and folder list all display properly, but it hangs
>> trying to load the message list for the mailbox. It works fine when on
>> the internal LAN, only happens from home. And the problem is not
>> constant - sometimes it will work, sometimes it will not. I've had
>> users complain about the issue from the entire spectrum of web browsers,
>> from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp
>> internet files and still have the problem.
>> I do see a java error on the logger screen, I'm not sure if its
>> related:
>> com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
>>
>> The only reference I could find to the above error on these forums(or
>> anywhere for that matter) was in the following thread:
>> http://forums.novell.com/novell-prod...unloading.html
>>
>> Which doesn't describe the problem I am having....
>>
>> Has anyone else seen this problem or have an idea what to check?
>>
>> Thanks in advance for any help
>>
>> -Rich
>>
>>
fuplivsyr

Problems with VMWare Fusion after MacOS Upgrade

Prior to upgrading yesteday I was able to use "open with" to select programs that were installed in either my Win 7 or XP VM on VMFusion. After the upgrade no longer set any of the Win apps. This is a real pain a now i have to open Fusion, Win 7 and use the Office 2010 app to open the file.
Has any one else had this problem? Is there something I can do to fix this?

Hi cjpembo,
my Card looks like:
01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
If I don't specify any module parameters, the tuner type 0 is selected.
ACPI: PCI interrupt for device 0000:01:07.0 disabled
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
Badcel
Last edited by badcel (2008-08-24 09:46:18)

Problems with "No WiFi" after OS upgrade

Ok....I have a 2G or 3G iPod Touch (not sure which but got it in January 2010) that I just finally upgrade to the the newest OS because I got tired of being told I couldn't download apps due to the OS. Well, now it's really fixed because I can't download anything and the iPod is a useless as a brick. I have the infamous "No WiFi" grayed out issue. Please don't try to tell me it's a hardware issue because that's a bunch of crap. Anyone with half a brain knows that it's the OS if it worked before the upgrade and now doesn't work at all. iPod worked just fine with absoultely NO WiFi issues before the upgrade and now it's useless after the upgrade. Clearly this is a VERY common issue from the Google searches I have done and clearly in MANY cases there appears to be no real fix. I'm a very technical-savy person and I've already spent at least 4 hours searching, backing up and restoring to no avail. I've rebooted the iPod, rebooted my router, restored the iPod to a new iPod, retored the iPod to the back-up and bascially NONE of the ideas work.
It is inconceivable to me that there is not a fix out there for this issue and that there isn't even a system restore to go back to the old operating system. Even Microsoft let's you restore to a previous time. That's pretty basic funtionality. For as bad as Microsoft can be, they at least understand that it's a necessity at times. Apple apparently doesn't even acknowledge that their operating system is broken. They'd rather you run out and buy a new iPod. Furthermore, I can't believe with the number of times I've seen the issue online, that there isn't a bigger outcry over it.
So, all you people out there that brag about how Apple products are more immune from all of those viruses, just realize you are being duped from Apple who is in essence creating its own virus by giving you an OS that renders your product virtually useless.
Would welcome any additional fixes for this issue, but after owning at least 6 different iPods, I will make sure I never buy another Apple product again unless this thing gets fixed.

No. That won't be necessary. To me that is an unacceptable and ridiculous solution. I'll just go buy an Android product and make sure I never waste another penny on Apple.
Really? Apple is that stupid that they can't create a fix that is downloadable? I'd stay far away from their computers and tablets if that's the case.

After Lion upgrade, MacBookPro has trouble wake from sleep.

After Lion upgrade, my Macbook Pro now sometimes will not wake from sleep. If I close the lid the pulsating light pulsates. Open the lid and the pulsating light goes out and the keyboard backlight activate, screen blank and no keyboard response.

I've been looking for answers, since upgrading to lion, my problem is more of a nusance, when I close the lid on my macbook pro (15" 2.66 i7, 8GB RAM) and it goes into sleep mode, when I reopen the screen the screen backlight comes up momentarily, then goes black (screen image there, just no backlighting) nothing gets it to come out (reclose/open, clicking trackpad, any keys, etc.) except the F1 key. Pushing the F1 "wakes" the backlighting, then I just hit the F2 to brighten it back up, I don't have any further issues until I close it again. Granted not that big of a deal given all the issues everyone else is having with this, but still a nusance I would like to fix. Don't know if this will work for you, but it's been working for me.
I have the same problem with my MBP 17"
Would have been nice if Apple had taken the time to respond.

Subject Key Identifier (SKI) changed after RootCA upgrade

Hello,
I have a RootCA running windows 2003 ENT SP2 and I made an upgrade to a new machine (newer HW) and Windows 2008 R2. The original rootCA was configured with an HSM, so the backup CA is not an option for me since the keys can not be exported (I dont
have a .p12 file).
I exported the HSM settings together with the keys (HSM vendor's procedure) and during the CA setup wizard, I select the option: "Use existing private key” and then “Select an existing private key on this computer” . Then I click on "edit"
select the correct CSP (the one from the HSM) and click on "Search". The private key appears immediately, I select it and i keep going with the installation. It all goes smoothly and CA services are correctly installed.
The problem is that the SKI of the new CA certificate does not match with the SKI of the original CA certificate, it is changed somehow during the installation.
I have performed the same test, but migrating to another windows 2003 server, and the SKI is kept exactly the same, there is no difference (maybe the way the SKI is generated is different from windows 2003 to 2008).
My applications communicate to each other using this SKI, replacing it everywhere is something that i dont want to consider.
Does somebody know if it is possible to force this setting to be kept?
Thanks in advance
Best regards

Hi Vadims,
Thanks for your reply, I have been playing a bit with openssl and a CA certificate, and in the meantime i solved the issue, and this is what I "guess" or what I understand from it:
1) If you install CA services and use the options: select and existing key --> select a certificate --> then you will have to choose a p12 file which contains both (public and private key) and will use both values to generate a NEW certificate,
but it will NOT generate the SKI value, it will just use the one from the p12 file. That is why the SKI does not change if you use this option
2) I am using an HSM and the private key is stored there and can not be exported, so, i can not generate a p12 file, in that case, I have the opther option in the wizard: select an existing key --> use an existing key.... Then i can choose the correct
private key from the HSM once i select the correct CSP... And then the fun begins:
3) Acording to the RFC
For CA certificates, subject key identifiers SHOULD be derived from
   the public key or a method that generates unique values. Two common
   methods for generating key identifiers from the public key are:
      (1) The keyIdentifier is composed of the 160-bit SHA-1 hash of the
      value of the BIT STRING subjectPublicKey (excluding the tag,
      length, and number of unused bits).
      (2) The keyIdentifier is composed of a four bit type field with
      the value 0100 followed by the least significant 60 bits of the
      SHA-1 hash of the value of the BIT STRING subjectPublicKey
      (excluding the tag, length, and number of unused bit string bits).
4) After all my openssl adventure, it all came down to 2 files containing the public key and the BIT STRING of the public key, I opened them both and I confirmed that for the SKI generated on the windows 2008 machine, the method used to calculate the
SKI is using the BIT STRING (option (1) from the RFC)
While for the SKI generated in the windows 2003 machine, the method is : ???????
What I think is that from windows 2003 to windows 2008 the certificate services changed the way they calculate the SKI.
First they were maybe doing a SHA1 of the whole public key and now they are using a SHA1 of only the bitstring of the public key which is more similar to what is said on the RFC (point 1)).
Then I started to look if there was a way to change this, and....

Problem syncing image files after OS5 upgrade.

Lost all my image files with upgrade. Do not use Touch for Music, movies, podcasts - just images and a few apps. Tried restore to factory settings so now also lost my apps! I am trying to sync using Itunes>Photos>All folders but after about 15 mins just have the folders in the Touch but no images content. Sometimes the sync just stops and message says session ended - other times it just does nothing else. If I try to sync a specific folder then that seems to work but all images are duplicated into a Photo Library which I do not want.
Looked to downgrade but seems I cannot do that.
Any ideas?
Thanks.
Brian

Alas, it didn't work. Instead of trying a shortcut, I followed the steps as closely as possible. The end result was that iTunes did not recognize any songs.
I think the problem is that the Mac immediately registers the pc .xml file as an "OmniOutliner" file instead of an HTML file. I ported the file three different ways: pc-to-mac, attached to e-mail, and burned to a CD. OS X immediately identified each as an OmniOutliner file. My guess is that the iPod treats the .xml file slightly differently, allowing the pc .xml file to cross properly with the iPod as an intermediary. (Although the article you pointed me to did not specifically say this would work cross-platform.) Unfortunately, I have a iPod Mini, which can't carry 28 gigs of music.
At this point, it seems to me, I can either buy a new iPod to try to port the .xml file, or load both xml files up in an HTML editor and manually update the OS X version, or forget it. I leaning toward the latter.
Thanks for pointers. It's always challenging to try something new.

Problems with TV - Card after Kernel Upgrade

Hi Folks,
since the last Kernel Upgrade I've got problems with my tv tuner card. Since ever I had to set the tuner manually to 38. But now it seems that its not enough just to set this type.
I used this script to set up my card correctly:
modprobe -r cx88-dvb cx88-blackbird cx8802 cx88-alsa cx8800 cx88xx
modprobe cx88xx tuner=38
modprobe cx8800
Now I've got weired sound and only a few stations, with a very poor picture quality. After reloading the modules with the script dmesg says:
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type 38, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
From my (limited) point of view the problem is, that tuner-simple does not loads the correct tuner type? I've looked into modinfo from tuner-simple but there is no parameter for type... What else could be the problem?
Thanks in advance
Badcel

Hi cjpembo,
my Card looks like:
01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
If I don't specify any module parameters, the tuner type 0 is selected.
ACPI: PCI interrupt for device 0000:01:07.0 disabled
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
Badcel
Last edited by badcel (2008-08-24 09:46:18)

WRT350N problem connecting to wireless after firware upgrade to 1.04.4

I have a WRT350N which has been in service for some time without any real trouble. I connect to it with a variety of laptops off and on and a ps3. Recently, my wife's laptop began disconnecting randomly and frequently. I repaired her windows after the usual tricks didn't help. After the repair, her problem was gone for a few weeks, then returned. It is a Dell Lattitude 110L and I suspect the wireless device in it is giving up. But I thought I would see if there were any firmware upgrades for my router, in case there was help for the situation that way. I was running 1.03.8 and 1.04.4 was available. So I downloaded and installed the upgrade.
My wired network continued to function just fine. But now none of my laptops or the ps3 could connect to the wireless. They saw the SSID being broadcast. They did key exchange. They requested a dhcp address, and then the connectionstopped being answered by the WRT350N. I tried many things. No joy. Decided to contact Cisco support via live chat. They had me change a number of settings for thresholds and channels and such with no effect. While doing this, I happened to notice that wireless QoS was disabled and the help says that by default it should be enabled. I have never changed this setting myself. In desperation, I put all the setting which Cisco had me mess with back to their defaults (where they were before Shaharyiar tried to help me) and I tried setting wireless QoS to enabled. Bingo. All my laptops and the ps3 now connect again. I suggested to the agent that they log this as a bug in the upgrade or the firmware. I got the impression that might not be followed up on, so I am posting my story here in the hopes it may prove helpful to others.
dennis

If you have other devices on your network that support Wireless QoS, select Enabled. Otherwise, keep the default, Disabled.
Thanks for the information. Your post will definitely help other users.

2 problems left 2 fix after xorg upgrade

hi,
im sure everyone is sick of the questions on here after the xorg upgrade, but I have 2 more I can't find answers to;
1/. when i try to use Eterm, it is always on top of every other application, but is never in focus! to use it, i am having to type commands into mousepad, then paste them with the mouse wheel into Eterm. I dont use any decoration on Eterm either, so with it not ever being in focus, keyboard shortcuts dont close it, so to close it, i have to write 'ps -ax' into mousepad, copy & paste with the wheel back into Eterm, find the PID, then type 'kill <PID>' into mousepad, then again copy & paste with the wheel back into Eterm!
2/. when X starts up, i have openbox, xcompmgr, stalonetray and tint2 autostart through my ~/.xinitrc, however, stalonetray is not visible and there are no shadows around either untill i have dragged another application over where they should be!
just so you know, i have disabled hotplugging in my xorg untill i have time to set it up properly!
http://wiki.archlinux.org/index.php/Xor … otplugging
thanks
Last edited by ninjaprawn (2008-12-09 20:29:39)

ok, i have been trying to fix my Eterm first. Firstly i run Eterm with -x argument, which is jus ment to open it with no decoration, however, after this update, it seems to now run Eterm with no decoration, unfocused, and always on top!
if I run Eterm without the -x argument, its fine! I think openbox can do apps without decoration or borders, so i will have a play with that!
with regards to xcompmgr, and not starting up quite right, i will play with xcompmgr & xorg.conf and post back any success / failure i have!

Problem opening mail attachments after snow upgrade

Hi,
After upgrade to snow leopard , mails which are coming from unix servers are coming as Mail Attachments.If we want to open them we need to right click and choose the application to open.
Could you please suggest how to open directly.
For Example : We generate a excel report(abc.xls) from unix box and send to users.Before upgrade the mail will show that report as excel with name as abc.xls and we can open by clicking it.But after upgrade it is coming as MailAttachment(name of he file is not abc.xls but MailAttachment)and we are not able to open by clicking.

As an addendum, anyone with IMAP or Exchange accounts should be aware of what Apple says about reindexing by this method at:
http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
Note the advice to remove account folders, and let Mail build new ones for IMAP accounts.
Ernie

HT202358 problems opening I photo after yosemite upgrade

I have tried to open i photo after loading yosemite and have been asked to download software to 'prepare' the mac for the new i photo version. I have done this and it says it's successfully installed the I Photo library upgrade but I still can't open I p

Did you use the iPhoto Library Upgrader to fix your iPhoto Library? Have you upgraded iPhoto to the latest version for use with Yosemite?

Subject: problem weblogic 6.0 after os upgrade to solaris 2.8 from solaris 2.6

Similar Messages

Maybe you are looking for