Subject Profile Category does not exist
Hi,
System: CRM2007
I have created a new subject profile Z* and assigned it to Subject Profile Category Y. When going to the next level (code group profile for Subject Profile), I get the ff. message:
"Subject profile category Y does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001"
Why does it not work?
Thanks
Anke
Hi,
For which scenario are you using the subject profile??
If you are using it for service then please maintain the Subject Profile Category as "A-Service" while defining the subject profile.
Regards,
PePe
Similar Messages
-
Subject profile category does not exist CRM_SUBJECT_PROFILE001
I have configured charm in our Dev system.
In transaction solution_manager ->change request management-> create
I get the following message:
Subject profile category does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001
Did I miss something in the configuration?
I configured a test system some time ago and did not have this issue.
Thank you!Answer found, note 898614
-
Product category does not exist in logical system
Hello Experts,
Need help in understanding product category change behaviour.
Shopping cart created and approved.
PO created and approved.
Now PO change version created by changing product category.
Please enlighten me whether this change is really allowed on business perspective and SAP perspective.
So far we been told that there is business case to justify this change.
If allowed by SAP, then how do we solve the problem of error occuring in workflow "product category does not exist in logical system XXXX".
Please advise.
Thanks,
GauravHi
I dont have a system right now to check
1.are you ordering the item from external catalog? ( any mapping between catalog product category to SAP product category )?
2. after approved PO created.
3. Now BUYER could change the product category again?
4. why the BUYER takes push ups for REQUESTER . Let Buyer cancel the PO and ask requester to create a PO.
What is the business process existing in your business ?
Since product category determines purchase group and every thing like gl account etc..
Can you recreate the same issue in development box?
Note 1466155 - GL account not re-determined on change of product categorySymptom
You have an SRM PO with items having multiple account assignment. Go to the PO item overview OR to the item basic data tab and change the product category. However, this does not trigger a new GL account determination for the accounting lines.
Note 1407962 - Category is editable when contract is assigned in PO item
Symptom
When ever a Contract item (Free text or Product Category) is assigned to a Purchase order free text line item, The category modification is not allowed. This is because the product category is always copied from the contract item and overrides the Category for Purchase Order Item. It is confusing for the user as the category is editable and can't be modified.
SAP has different different behaviors . Kindly tell us what type you belongs too... -
IW32 - Capacity category does not exist or cannot be selected
We are getting the bellow error upon exiting IW32, could you please tell us how to resolve
Capacity category does not exist or cannot be selected
Message no. CY374Hello Ehsan,
This message also appeared for the first time after we applied EHP5, a note has been released regarding (Message CY374)see SAP note 1547467 for resolution and implement note 1504266 .
regards
Spencer -
BAPI_SALESORDER_CREATEFROMDAT2 Error "Address category does not exist"
Hello everyone,
I have the following error "Address category does not exist" when executing bapi "BAPI_SALESORDER_CREATEFROMDAT2" from a user application, the error is not constant, meaning sometimes shows and sometimes does not, I´ve been investigatnig regarding this and it seems to be a buffer problem, found SAP Note "1232196 - Inexplicable error in BAPI" and implemented FM "SD_SALES_DOCUMENT_INIT." as solution described, but it's still not working, does anyone faced this problem before that could help me out?
Thanks in advance for your replies.
Regards,
Julio CesarHi julio,
I guess this error occurs due to some pre configuration issue with the value by which your creating the sales order. Have you tried creating sales order with any other value or with just header data.
Regards,
sivaganesh -
Profile profile_name does not exist
I've got a fresh install and I can get my wireless up and running by commands.
ifconfig eth0 up
iwconfig eth0 essid mywlan
wpa_supplicant...
dhcpcd eth0
and as the Network_tutorial suggests, I created a mhrwlan file in /etc/network.d/ with the following content:
CONNECTION="wireless"
INTERFACE=eth
SCAN="yes"
SECURITY="wpa"
ESSID=mywlan
KEY="SomePasskey"
IP="dhcp"
but after issuing:
netcfg /etc/network.d/mhrwlan
I get :
Profile "/etc/network.d/mhrwlan" does not exist
Please tell me what's wrong.
RegardsThanx, it did the trick, But could you also tell me where exactly should I invoke this command to avoid running it each time the computer boots up?
should I put it in /etc/rc.local or sth?
Last edited by mahan_h (2009-03-18 06:05:41) -
Work center category does not exist in CNR1
Hi,
While creating a work center through CNR1, I am getting the error 'Work center category 008 does not exist'. I checked OP40 and the work center category is maintained there. Also the category 0008 has application maintained as Recipes.
Let me know if I am missing anything here.
Thanks & Regards,
Soumya.Hi,
I feel so. If your using the work centre category for project managment, then, application management will be assigned to N, then you can use CNR1, which is the T code to create work centre in Project management.
In the standard system, Work centre category for project management is 006.
Pl. try creating the work centre through CRC1 for process manufacturing.
Madhava -
Address category does not exist
Hi All,
I am facing the issue while i am creating a sales order from service order ( Transaction code IW32) , i am getting the warning message sayuing that Address category doew not exist ;Mesage no VP 700.
Kindly help..Its urgent needs to rectify the same as this is business requirement.
Regards,
SK
Edited by: Mastan Shaik on Jul 21, 2011 12:14 PMHi mastan
Check this links
SD: Error while reversing post goods issue
hope it will help to you
Regards,
Krishna -
Settlement profile does not exist
Hi Gurus
I am getting an error while creating a Sales order "Settlement profile does not exist" . Error description is "The system has found a settlement rule that is assigned to settlement profile ZSOR. However, this settlement profile does not exist".
I checked in settlement profiles ZSOR does not exist there as per the error description. I am getting this error because of settlement profile is assigned to planning strategy 20.
I tried changing the settlement profile but the field was greyed out.
So i need your help in changing the settlement profile in planning strategy.
Thanks in advance.
Quantum.Dear,
Menu Path: SPRO > Controlling> Product Cost Controlling > Cost Object controlling > Product Cost by Sales Order > Period end Closing > settlement > Create Settlement profile.
The finding of a requirement type is done via combination of item cate-gory and MRP type in transaction OVZI. Check which which requirement type is set with of item category and MRP type.In transaction OVZH you will find the combination of requirement typeand requirement class and in transaction OVZG you can customize thesettlement profile for the chosen requirement class.
Or don't assign settlement profile to requirement class.
IMG>SD>Basic Functions>Account Assignment/Costing>Maintain Requirements Classes For Costing/Account Assignment.
Goto OKO7, choose option settlement not allowed for sales order.
It will solve your problem.
Regards,
R.Brahmankar -
Cost Center does not exist for a particular period - Solution
We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this errorThe Post contains a solution
-
Start screen does not exist in batch input data
I'm using .NET Connector calling Rfc_Call_Transaction funtion throught a proxy, i stablished all the params as you can see in the code below, but i get the message cited in the subject 'Start screen does not exist in batch input data'.
What do you think is happening? or Where can i get the samples needed for perform this type of request?
private BDCDATA FillBDCDATA(string Program,
string Dynbegin,
string Dynpro,
string Fnam,
string Fval)
BDCDATA st_DATA = new BDCDATA();
st_DATA.Program = Program;
st_DATA.Dynbegin = Dynbegin;
st_DATA.Dynpro = Dynpro;
st_DATA.Fnam = Fnam;
st_DATA.Fval = Fval;
return st_DATA;
private void button3_Click(object sender, System.EventArgs e)
SAPProxy proxy = null;
try
proxy = new SAPProxy("ASHOST=" + txtHost.Text +
" SYSNR=" + txtSysnr.Text +
" CLIENT=" + txtMand.Text +
" LANG=" + txtLang.Text +
" USER=" + txtUser.Text +
" PASSWD=" + txtPass.Text);
catch(Exception excpt)
txtMsg.Text = excpt.Message;
if (proxy == null)
return;
BDCDATATable tblBDCDATA = new BDCDATATable();
MESSAGEINF infMessage = new MESSAGEINF();
//BDCDATA st_DATA = new BDCDATA();
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BDC_OKCODE", "/00"));
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-BLDAT", "30.12.2004"));
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-VERSN", "0"));
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "FMPS-FIKRS", "ente"));
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-JAHR", "2005"));
proxy.Rfc_Call_Transaction("FM9J","", out infMessage, ref tblBDCDATA);
txtMsg.Text = infMessage.Msgtx;Jose,
I imagine you are passing, for the Dynbegin parameter of the private method FillBDCDATA, invalid values.
Why don't you try this way:
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "X", "0111", " "," "));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BDC_OKCODE", "/00"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-BLDAT", "30.12.2004"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-VERSN", "0"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "FMPS-FIKRS", "ente"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-JAHR", "2005"));
I hope I could help you.
Regards,
Daniel Carvalho -
When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar -
Profile does not exist on server error message
I am able to sign in to the support community, but when I try to update my preferences it says my profile does not exist on the server. Any Ideas?
Hi, Jon -
The new design for these forums does not handle usernames (aliases) with special characters in them very well. In this context, 'special characters' includes accent marks and, in your case, the use of a slash as in "Mac/Video" and probably the inclusion of the colon after "Jon". Some of the symptoms reported include not being able to log in at all, or not being able to get to one's Profile (because the system can't find it).
I will ask the Hosts to get in touch with you about fixing things so you can re-acess your account settings. -
while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305
I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST -
Category for service category S046 does not exist
Dear Experts,
This is regarding the Bdoc error "Category for service category S046 does not exist". ECC service materials are trying to replicate from ECC to CRM. In our scenario we doesn't required ECC service material in CRM. I have not downloaded service materials relevant data. Still i am facing the above error.
Please help to fix the above error.
Regards
AshwiniHi,
Thanks for your reply. I have maintained the filter on service_master object is not working.
I have not downloaded the service material from ECC to CRM.Then what could be the reason for the above bdoc error.
Please help me.
Regards
Ashwini
Maybe you are looking for
-
The album art is incorrect on my ipod touch 4th gen. How do I fix this?
My refurbished ipod touch 4th generation 64GB is showing incorrect, wrong, mismatched album art. The album art shows correctly in itunes but incorrect on my ipod. At first, it only showed a few mismatched songs. Then I tried deleting the songs from
-
Scanned tables to word or excel
Hi, I tried to convert a pdf file that contains scanned tables (3 columns: title and two years financial entry). The outcome is not useful as I can not select the number from a particular column: either the whole table is selected or the title and th
-
Fee payments against specific programmes
Hi A slight variation on something we were looking at earlier! One of our schools is looking to introduce a new suite of programmes that do not have any specific modules attached but rather students can select as per their requirements. The intention
-
Can Someone explain Apple's Notes App to me?
I have a couple of questions about Apple's Notes app. For one, why do I have two different notes accounts. One is from my Gmail, and the other says "From my Mac." I created neither of these directly. I have forwarded some notes to myself and I think
-
Problem with video playback, youtube, news channels etc
I've taken a good look around and can't find any answers to this, so here goes. I use my iMac in W7 a lot as it suits me for work, however, when I view news videos (at www.bbc.co.uk for example) or on YouTube the screen and whole computer freezes, no