Subject: QM : Unit of Mesure of Field Cant find in any table

Dear All sap Gurus,
I have one inspection lot , for that inspection lot no of characteristics & specification & result are maintained . the t-code is QE13 in that t-code i am maintained this things . in that t-code in specification column FC maintan data ' >= 180 N/mm2 ' . in that data i have Unit Of measure . remaining this i taken '>= 180' but i cant take unit of measure 'N/mm2' .
the unit of measurement field is 'MASSEINHSW' .
and MIC filed is 'MKMNR'.
i want table is like that in that table PRUEFLOS or MATNR is available .
this unit of measure is maintain in QA21 t-code .in QS23 t-code i put MIC and maintain this unit of measure .
so please give me solution where this unit of measurement is maintain .
Nikhil Narkhede
9225877587.

Hello
1. MARA-MEINS
2. Then goto T006A

Similar Messages

HT4993 i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

I had to reformat my MacBook Pro and I cant find iPhoto any places, do i have to buy it in the appstore now??

My MacBook had to be reformat and everything on the mac disappeared, including Iphoto.
Since Iphoto was on the computer when i bought it i cant understand why. so my cuestion is do i now have to
but Iphoto in appstore or can i find it somewear ? thank you for helping

You should be able to restore the iLife apps, see this support article:
From Accept iLife: OS X: About OS X Recovery
If you erase install OS X Lion or OS X Mountain Lion on a new Mac that shipped with OS X Lion or OS X Mountain Lion installed, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start (up) from OS X.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie

HT1933 I have downloaded an app but i cant find it any more how do redownload it

I have bought an app but i want it on my ipad and it is not on the app store any more what do i do

If it is no longer in your country's app store then you won't be able to re-download it. If you have a copy of it on your computer's iTunes or on a backup of your downloads (if it's only on your iPod then you should be able to copy it over to your computer's iTunes via File > Devices > Transfer Purchases) and you can then sync it to your iPad.

IE7 HAS BLOCKED FLASH PLAYER FROM DOWNLOADING I HAVE LOOKED EVER WHERE I CANT FIND IT ANY WHERE IN INTERNET OPTIONS

ok i have looked ever where in internet options i have even
been to java and have not found anything that will let me turn on
flash player can someone help me out with this

Since you mention IE8, I assume that you are on Windows. 32-bit or 64-bit?
Try this:
download the FP uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html (save to disk);
download the FP installers
for Internet Explorer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe (save to disk);
for all other browsers http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe (save to disk);
close all browser windows and run the downloaded uninstaller;
restart Windows;
run the downloaded installers.

How to use FIELD-SYMBOLS to declare a table

How to use FIELD-SYMBOLS to declare a table?

hi yong,
this will be very general:
FIELD-SYMBOLS : <gf_table> TYPE ANY TABLE.
or
to do like a specific table from your program
FIELD-SYMBOLS : <gf_table> TYPE itab.
itab is of course your internal table from your program.
ec

Cant find function bar in lv.

Im a new programmer in labview and ive been watching the online tutorials at frcmastery.com, but when i go into my labview and the block diagram does not have a function bar, ive looked everywhere for it and still cant find it, any help?

Greetings Programmer1696,
Smercurio already offered up the best advice, however I would also like to share the document linked to below that covers the basic structure and organization of the Functions Palette.
Functions Overview
http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/functions_overview/
If the functions palette is not what you are looking for, feel free to respond with a clarification.
Michael G.
Applications Engineer
National Instruments
Self-realization: I was thinking of the immortal words of Socrates, who said, "... I drank what?"

QuickTime said that it is all ready installed on my comp I CANT FIND IT

I cant find OuickTime any where on my comp yet when i try to dl it
it says that i all ready have
HELP ME PLEZZZ
i cant get ituns to work eather
Dimension E510 Windows XP

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

My audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic

my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
any help please im going out my mind
regards james

Thanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
Again thanks for replying
Regards James

Unit of the Quantity field is displaying in internal format in Bex report

Hi Experts,
I have a BEx Query, in which i have quantity keyfigure added(Examble - Sales Quantity).
When i run the report for a selection the report displayes the unit for the quantity field in internal format.
Examble - instead of showing 10 CS (case), the report is shwing in 10 CV (internal format of unit CS is CV).
Also when i check the cube content, it has the unit updated into the cube as CS for that keyfigure.
Can any one let us know, how to dispaly the report output in external format.
Regards.
Muruganand.K

Hi Gopi,
The property in question is "calculated". This is a property of a context value attribute. So select the value attribute in the context to which your field is bound and view the properties. Set "calculated=true". It will generate the accessors.
In the setter method, add the following piece of code:
public void set<your attribute name>(IPrivate<your component>View.IContextElement element, java.lang.String value)
DecimalFormat df = new DecimalFormat("#.00");
value = df.format(value).toString();
Regards,
Satyajit
Message was edited by: Satyajit Chakraborty
Message was edited by: Satyajit Chakraborty

Remote for ipad, cant find songs, but my iphone can, on the same network

hi all
have a very odd problem, and apple cant seem to help me, i´m using the app called remote, to control my itunes music, from both my iphones, ipod touch and the ipad, they all connect to the same itunes music library and i can control them just fine, and choose the music and which airplay unit i want to listen to.
so far so good
but on the ipad, if i do a search for BEE GEES, it shows the artist name BEE GEES, but when i press the artist name, to view the songs, it says no songs, and that i should buy some from itunes.
but when i do the exact same search from either the iphones or the ipod touch, the search then again shows BEE GEES and when i press the artist, it shows the songs that i have with that artist.
the strange thing is that if i search for a song name on the ipad, like NIGHT FEVER it see´s the artist as BEE GEES and i can play it, i just cant seem to do a search by ARTIST, then it returns with no songs????
i have made a small video of this, that you can see here, to further explain the issue
http://gallery.me.com/blackbox100/100023/Remote%20problem%20iPad
i have talked to apple numerous times, but they cant offer me any explanation
i have tried to delete the app on the ipad, and reinstall it, but that didnt help, i have tried to hook up to another itunes directory, and that didnt help either?
any help would be appreciated

I have exactly the same problem.
I made some short "tests" and it seems that if the "Album" field on the info of a song (ID3 tag) is empty, it doesn't appear on the search result of an artist (only on iPad's remote app).
So, if you fill the "album" field of a song (on the "get info" option) then it will be displayed on the list of songs of the particular artist that you have searched for, on the "remote app" on the iPad.
As a fast solution (mostly a stopgap) I would recommend that you will open iTunes on your computer and highlight all the songs that have empty the "album" field on the "get info" window (ID3 tag). Then right click and choose "get info". In the "Album" field, type a space or let's say the word "unknown" and click ok. Of course if you know the real name of the Album, you will fill that field with the right information.
After that, all the tracks should be displayed under every artist in the iPad's Remote app.
Apple should give a solution on that bug. It is strange that there is no such problem on iPhone's Remote application, but only on iPad's.

How do you get the screensaver that takes your iPhoto pictures and make one big picture? Used to have it on 10.6.8 but cant find it

Used to have it on 10.6.8 but cant find it. It took all the pics from iPhoto I think then made a pic out of them as a screen. Help?

Ah, welcome to my world...the world of progressive vs interlaced, RGB vs YUV, compression/decompression,10 bit or 8 bit, 4:4:4 vs 4:0:1 vs 4:1:2, color space (etc, etc, etc..!)
There's HD, DV, HDV, NTSC, PAL and more - its a place where acronyms roam free and multiply daily.
You're in for a fascinating journey that will soon have you understanding things you never dreamt you'd need to know, then when you think you've got to grips with 'em, you'll discover you don't really know the first thing about them...!
Fortunately you've got Bogie, Patrick, Shane, David and more to take you along for the ride.
I will suggest (and probably be corrected) that what you're seeing is probably interlaced footage on your progressive monitor. (You mentioned you're watching the DVD on your computer.) Your TV has far fewer lines of resolution than your computer monitor, so FCP works within those constrictions. Also your TV runs at 29.97 frames a second, which is actually 60 frames a second as each frame is divided into two fields, which comb together to for one frame. These combs are very much evident when watching a DVD on a computer. Even high budget Hollywood films have this problem, especially when the camera or subject is moving. There is no way around this if you're outputting on DVD or NTSC.
You could create an Progressive file, which won't do this on your monitor, but thats a whole other ball of wax...
Welcome though. Its all good. (And the people on this site are very helpful, I've learnt a lot over the last 5 years by simply reading these posts.)

I cant find a fonctional Wacom Driver for my x61 SXGA Tablet!

Hi volks
i cant find a fonctional Wacom Driver for my x61 SXGA Tablet!
I installed once the new Bamboo Driver (5.08) from the Wacom Homepage.
But the Driver didn't wokk, i was written that none supported device could be find.
So I installed the old Bamboo Driver (5.07) on it, and I had some Problems. I couldnt calibrate my monitor, there was only the arrow when i moved my pen and when i turned the desktop 270°, there was a problem with using the pen: When I went with the pen down, the arrow went up. One positive thing was only that the pressure ability was working fine in photoshop.
You know maybe which driver i should try?
http://www.wacom.com/productsupport/model.cfm btw. i cant find this sticker on the Back of my tablet.
greez

Since this thread is on the subject of the stylus..........
I've noticed that when turning the LCD (flipping it over for tablet position) on some units the stylus will stop working. I'm seeing this alot. I've replaced LCD cables, made sure theres enough slack so its not pulled when turning the LCD 180 deg., etc.
     I can't see any types of sensors that would signal the driver or BIOS when the display is flipped into tablet position - but am I missing something. Does the software know when the display in in tablet mode - if so, maybe this problem is indeed driver or BIOS related.
   Does anyone know what could be the cause....and /or the answer here?
                   Thanks........DCO

Blackberry 8900 says 1 message but cant find it.

Yes i know this is a repeat of another post. but the other one doesnt answer my problem and i still cant find out where the hell the message is.
I have tried searching for the message in question but i cant seem to find it using the search option or entering different folders.
it happened after i linked my email to the phone but its not in my email inbox or junk.
any help appreciated... thanks.
Jake

Hello,
It's unfortunate you didn't provide us a link to the other post you tried the instructions from...makes it a bit difficult for us to avoid redundant information. But, since that is the case...here's what I have to offer...
Homescreen > Messages > > Search
Set as follows (may vary depending on your device OS level):
Search Type: Local
Name In: Any Address Field
Subject Message: <leave blank>
Include Encrypted Messages: Yes
Service: All Services
Folder: All Folders
Show: Unopened Only
Type: All
That should return to you all unopened messages from all message conduits.
Also try making sent and filed messages visible...it could also be one of those.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP

pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP
i was working on a document with pages. while transferring files from USB, the 'pinball' thing popped up for the longest time which lead me to force quit the document. the document had been saved before quitting. however, my macbook starts to reboot, and after rebooting that specific file is missing. Before it quit, it says that the file is locked and asked me to create a duplicate, which i clicked yes to.

Hi,
just to say that while waiting for a help
I decided to go back from zero and moved to a second network (thanks i got some few computers available for my tests ) and this time i run in another trouble wich is the subject of a former post (with no reply...) <<HELP!! "Checksum failed" & "Integrity check on decrypted field failed ">>
http://forum.java.sun.com/thread.jspa?threadID=791804&messageID=9468957#9468957
Seems this always just leads us to problems...
Strange Sun Java Security Team just won't do anything to help us deploy quite easily on one of the most widely-spread platform ( despite we don't like them that much it's MS servers (2000 and 2003) )
Anyway if one could help... on one of the two issues Thanks

Subject: QM : Unit of Mesure of Field Cant find in any table

Similar Messages

Maybe you are looking for