Subject: Troubleshoot Copy of Cubes
I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong. ~3000 records get copied, then following error is shown:
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
After error occurs I get following message in mail:
The error occurred in Extractor.
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited
at the time of the data request. Make sure that the file is in
the specified directory, that it is not being processed at the
I looked in SM21, system logs, whenever error occurs, I see the u201C
Database selection with invalid cursor &5&5
The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
My cube copying (from cube 1 to cube 2) is a straightforward procedure:
a. Select Copy from Cube 1 and create Cube 2.
b. Create Export Data Source from Cube 1 Menu.
c. From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
d. Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what???
when you say copy cubes .., do you mean making a copy of the existing cube or also loading data from the same. Cursor errors usually occur for datasources.
Please give your sp levels....
How to copy data from one cube to another
is this thread also related to the same....
Edited by: Arun Varadarajan on Jun 29, 2009 7:21 AM
Similar Messages
-
Copying a cube and configuration
I am trying to copy a certain cube and its configuration, can you please tell me how i can do this [step-by-step]?
Thanks in advanceHi,
U can copy the cube as Ravi said, if u want to load the data of same cube to new created cube u can do it by also reconstruction for more details go through the below link.
http://help.sap.com/saphelp_bw31/helpdata/en/f2/99223803926e39e10000009b38f8cf/content.htm
Regards-
Siddhu -
Transformations not copied from cube flow to dso
hi
i have 3.x flow from ds to cube. i want use dso in the middle before load to cube.
i migrated flow 3.x to 7.x?
now i created dso with same cube structure?
i am trying copy of cube transfromations ( which migrated 3.x to 7.x flow) to dso? most of the fields not mapping? we can do manual this is no issue, my doubt is why filed mapping is not done when i copy transformations?If you are mapping from a DSO to cube then you will not get overwrite option.
In cube only data aggregation is possible. -
Is it possible to copy a cube including with the transformation?
Hello...
is it possible to copy an existing cube to a new cube but the copy process including with the transformation, data transfer process (all)?
thanks for your adv
thanks
AndikaHi Andika,
To copy the cube, go to RSA1 and Rclick on the Infocube which you want to copy.
by default the technical name will be prefixed with 'C_' , for example, if your current cube name is 'ZCUBE' , the copied one name will be 'C_ZCUBE'.
however you can change the technical name, and activate it.
and then go to the old transformation, Rclick -->Copy, and edit your target name, then activate it.
and about DTP, we cannot copy, you need to create one under the new cube.
Regards,
adlin -
What are the steps to copy BC cube
Hi gurus,
can anyone explain me the steps to copy a BC cube as it is...
Thanks in advance..
S RamHi,
First install the BC cube and then create a cube with the copy of the BC cube.
Hope it helps.
If you have any doubts please let me know.............. -
Hello
I wanted to copy the data of one cube to another. Say cube 1 is having data and cube 2, same as cube 1 in structure, should have all the data which is in cube 1. But there are no requests in PSA. Can i achieve this?
Regards
SriramYes, create an export datasource for the first cube (right-click on cube in RSA1 and choose 'Create export datasource'. Once you have done this, you can map this datasource to your second cube. You can then create an infopackage and load the data as you normally do.
This method fetches data directly from the cube and not from any other PSA etc. -
Need Help Troubleshooting Copy Function
When I try to copy a page using the flatbed scanner, the printer will scan the page and act like it's going to perform the copy. However, after about 20 seconds, the printer spits out a blank page and on the touchscreen, it says "Printing canceled." (I did NOT touch anything on the printer to cancel the Copy request.) After that, the printer never recovers, i.e. it hangs on the "printing canceled" message. I end up powering the printer off, waiting a few seconds, powering it back on, and trying to copy the page again. Thankfully, the copy function performs as expected, no problem.
This process occurs every time I try to copy something, and I think it's silly to believe that I need to power my printer off then turn it back on every time I want to copy something. My settings are very simple: Make one copy, 1-to-1 sided, black ink.
Any help in trying to figure out why my printer does this, or how to make it work properly on the first attempt, would be appreciated.Hello mamacgl,
Welcome to the HP Forums.
I see that you are having some copy issues.
I have seen this issue in the past and I was able to get it resolved by doing one simple step.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is powered back on, use the on/off button to do a proper power cycle. This will do a semi power reset on the printer.
Try another copy and let me know if you still have issues or if you have any other questions, feel free to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Copy AWM Cube to another box where i haven't AWM
Hi,
i've developed my cube in AWM on Windows Machine (also I have created my cube view using View Generator plug-ini). Then I have mapped it in Administration Tool and exported in Answers and all works fine.
Now, I must export my cube on Unix machine where I have not AWM, so i want export all making an export of my db on Windows Machine. What elements I must export, so all works also under Unix?. I've tried to export OLAP_VIEWS schema plus schema where there's my dwh db. But it doesn't work. In fact when I execute script
CREATE OR REPLACE VIEW MMG_CALABRIA_CUBEVIEW AS
SELECT
"DIM_TEMPO",
"DIM_AMMINISTRATIVO",
"DIM_ASSISTITO",
"DIM_ESENZIONE",
"DIM_FARMACO",
"DIM_ETA",
"DIM_MEDICO",
"DIM_PATOLOGIA",
"DIM_PRESTAZIONE",
"DIM_SANITARIO",
"DIM_SERVIZIO",
"DIM_TIPO_MEDICO",
"DIM_TEMPO_TEMPO_GER_PRNT",
"DIM_TEMPO_ANNO_LVLDSC",
"DIM_TEMPO_QUARTO_LVLDSC",
"DIM_TEMPO_MESE_LVLDSC",
"DIM_TEMPO_TIME_SPAN",
"DIM_TEMPO_END_DATE",
"DIM_TEMPO_LDSC",
"DIM_TEMPO_SDSC",
"DIM_TEMPO_DIM_TEMPO_DSO_1",
"DIM_TEMPO_LEVEL",
"DIM_AMMINI_AMM_GER_PRNT",
"DIM_AMMINI_AMM_TOTAL_LVLDSC",
"DIM_AMMINI_REGIONE_LVL",
"DIM_AMMINI_REGIONE_LVLDSC",
"DIM_AMMINI_PROVINCIA_LVL",
"DIM_AMMINI_PROVINCIA_LVLDSC",
"DIM_AMMINI_COMUNE_LVL",
"DIM_AMMINI_COMUNE_LVLDSC",
"DIM_AMMINI_LDSC",
"DIM_AMMINI_SDSC",
"DIM_AMMINI_LEVEL",
"DIM_ASSIST_ASS_GER_PRNT",
"DIM_ASSIST_ASS_TOTAL_LVLDSC",
"DIM_ASSIST_SESSO_LVLDSC",
"DIM_ASSIST_NOMINATIVO_LVLDSC",
"DIM_ASSIST_LDSC",
"DIM_ASSIST_SDSC",
"DIM_ASSIST_LEVEL",
"DIM_ESENZI_ESEN_GER_PRNT",
"DIM_ESENZI_EROGAZIONE_LVL",
"DIM_ESENZI_ESENZIONE_LVL",
"DIM_ESENZI_ESEN_TOTAL_LVLDSC",
"DIM_ESENZI_EROGAZIONE_LVLDSC",
"DIM_ESENZI_ESENZIONE_LVLDSC",
"DIM_ESENZI_LDSC",
"DIM_ESENZI_SDSC",
"DIM_ESENZI_LEVEL",
"DIM_FARMAC_FAR_GER_PRNT",
"DIM_FARMAC_PRINCIPIO__LVL",
"DIM_FARMAC_NOME_FARMA_LVL",
"DIM_FARMAC_FAR_TOTALE_LVLDSC",
"DIM_FARMAC_PRINCIPIO__LVLDSC",
"DIM_FARMAC_NOME_FARMA_LVLDSC",
"DIM_FARMAC_LDSC",
"DIM_FARMAC_SDSC",
"DIM_FARMAC_LEVEL",
"DIM_ETA_ETA_GER_PRNT",
"DIM_ETA_ETA_TOTAL_LVLDSC",
"DIM_ETA_FASCIA_ETA_LVLDSC",
"DIM_ETA_LDSC",
"DIM_ETA_SDSC",
"DIM_ETA_LEVEL",
"DIM_MEDICO_MED_GER_PRNT",
"DIM_MEDICO_NOMINATIVO_LVL",
"DIM_MEDICO_MED_TOTAL_LVLDSC",
"DIM_MEDICO_NOMINATIVO_LVLDSC",
"DIM_MEDICO_LDSC",
"DIM_MEDICO_SDSC",
"DIM_MEDICO_BUDGET",
"DIM_MEDICO_LEVEL",
"DIM_PATOLO_TIPO_PATOL_LVL",
"DIM_PATOLO_PATOLOGIA_GE_PRNT",
"DIM_PATOLO_TIPO_PATOL_LVLDSC",
"DIM_PATOLO_LDSC",
"DIM_PATOLO_SDSC",
"DIM_PATOLO_LEVEL",
"DIM_PATOLO_PAT_TOTALE_LVLDSC",
"DIM_PRESTA_PREST_GER_PRNT",
"DIM_PRESTA_TIPO_PREST_LVL",
"DIM_PRESTA_PREST_TOTA_LVLDSC",
"DIM_PRESTA_TIPO_PREST_LVLDSC",
"DIM_PRESTA_LDSC",
"DIM_PRESTA_SDSC",
"DIM_PRESTA_LEVEL",
"DIM_SANITA_SAN_GER_PRNT",
"DIM_SANITA_DISTRETTO_LVL",
"DIM_SANITA_ASP_LVL",
"DIM_SANITA_SAN_TOTAL_LVLDSC",
"DIM_SANITA_DISTRETTO_LVLDSC",
"DIM_SANITA_ASP_LVLDSC",
"DIM_SANITA_LDSC",
"DIM_SANITA_SDSC",
"DIM_SANITA_BUDGET_STRUTTURA",
"DIM_SANITA_LEVEL",
"DIM_SERVIZ_SERV_GER_PRNT",
"DIM_SERVIZ_SERV_TOTAL_LVLDSC",
"DIM_SERVIZ_TIPO_SERVI_LVLDSC",
"DIM_SERVIZ_LDSC",
"DIM_SERVIZ_SDSC",
"DIM_SERVIZ_LEVEL",
"DIM_TIPO_M_TIPO_MEDICO__PRNT",
"DIM_TIPO_M_TIP_MED_TO_LVLDSC",
"DIM_TIPO_M_LDSC",
"DIM_TIPO_M_TIPO_MEDIC_LVLDSC",
"DIM_TIPO_M_SDSC",
"DIM_TIPO_M_LEVEL",
"QTA_PRESCRITTA",
"QTA_EROGATA",
"SPESA_PRESCRITTA",
"SPESA_EROGATA",
"OLAP_CALC"
FROM table
OLAP_TABLE
'MMGDWHPROD.CALABRIA_AWM duration session',
'&(MMG_CALABRIA_CUBE_LIMITMAP)'
MODEL DIMENSION BY
DIM_TEMPO,
DIM_AMMINISTRATIVO,
DIM_ASSISTITO,
DIM_ESENZIONE,
DIM_FARMACO,
DIM_ETA,
DIM_MEDICO,
DIM_PATOLOGIA,
DIM_PRESTAZIONE,
DIM_SANITARIO,
DIM_SERVIZIO,
DIM_TIPO_MEDICO
MEASURES
DIM_TEMPO_TEMPO_GER_PRNT,
DIM_TEMPO_ANNO_LVLDSC,
DIM_TEMPO_QUARTO_LVLDSC,
DIM_TEMPO_MESE_LVLDSC,
DIM_TEMPO_TIME_SPAN,
DIM_TEMPO_END_DATE,
DIM_TEMPO_LDSC,
DIM_TEMPO_SDSC,
DIM_TEMPO_DIM_TEMPO_DSO_1,
DIM_TEMPO_LEVEL,
DIM_AMMINI_AMM_GER_PRNT,
DIM_AMMINI_AMM_TOTAL_LVLDSC,
DIM_AMMINI_REGIONE_LVL,
DIM_AMMINI_REGIONE_LVLDSC,
DIM_AMMINI_PROVINCIA_LVL,
DIM_AMMINI_PROVINCIA_LVLDSC,
DIM_AMMINI_COMUNE_LVL,
DIM_AMMINI_COMUNE_LVLDSC,
DIM_AMMINI_LDSC,
DIM_AMMINI_SDSC,
DIM_AMMINI_LEVEL,
DIM_ASSIST_ASS_GER_PRNT,
DIM_ASSIST_ASS_TOTAL_LVLDSC,
DIM_ASSIST_SESSO_LVLDSC,
DIM_ASSIST_NOMINATIVO_LVLDSC,
DIM_ASSIST_LDSC,
DIM_ASSIST_SDSC,
DIM_ASSIST_LEVEL,
DIM_ESENZI_ESEN_GER_PRNT,
DIM_ESENZI_EROGAZIONE_LVL,
DIM_ESENZI_ESENZIONE_LVL,
DIM_ESENZI_ESEN_TOTAL_LVLDSC,
DIM_ESENZI_EROGAZIONE_LVLDSC,
DIM_ESENZI_ESENZIONE_LVLDSC,
DIM_ESENZI_LDSC,
DIM_ESENZI_SDSC,
DIM_ESENZI_LEVEL,
DIM_FARMAC_FAR_GER_PRNT,
DIM_FARMAC_PRINCIPIO__LVL,
DIM_FARMAC_NOME_FARMA_LVL,
DIM_FARMAC_FAR_TOTALE_LVLDSC,
DIM_FARMAC_PRINCIPIO__LVLDSC,
DIM_FARMAC_NOME_FARMA_LVLDSC,
DIM_FARMAC_LDSC,
DIM_FARMAC_SDSC,
DIM_FARMAC_LEVEL,
DIM_ETA_ETA_GER_PRNT,
DIM_ETA_ETA_TOTAL_LVLDSC,
DIM_ETA_FASCIA_ETA_LVLDSC,
DIM_ETA_LDSC,
DIM_ETA_SDSC,
DIM_ETA_LEVEL,
DIM_MEDICO_MED_GER_PRNT,
DIM_MEDICO_NOMINATIVO_LVL,
DIM_MEDICO_MED_TOTAL_LVLDSC,
DIM_MEDICO_NOMINATIVO_LVLDSC,
DIM_MEDICO_LDSC,
DIM_MEDICO_SDSC,
DIM_MEDICO_BUDGET,
DIM_MEDICO_LEVEL,
DIM_PATOLO_TIPO_PATOL_LVL,
DIM_PATOLO_PATOLOGIA_GE_PRNT,
DIM_PATOLO_TIPO_PATOL_LVLDSC,
DIM_PATOLO_LDSC,
DIM_PATOLO_SDSC,
DIM_PATOLO_LEVEL,
DIM_PATOLO_PAT_TOTALE_LVLDSC,
DIM_PRESTA_PREST_GER_PRNT,
DIM_PRESTA_TIPO_PREST_LVL,
DIM_PRESTA_PREST_TOTA_LVLDSC,
DIM_PRESTA_TIPO_PREST_LVLDSC,
DIM_PRESTA_LDSC,
DIM_PRESTA_SDSC,
DIM_PRESTA_LEVEL,
DIM_SANITA_SAN_GER_PRNT,
DIM_SANITA_DISTRETTO_LVL,
DIM_SANITA_ASP_LVL,
DIM_SANITA_SAN_TOTAL_LVLDSC,
DIM_SANITA_DISTRETTO_LVLDSC,
DIM_SANITA_ASP_LVLDSC,
DIM_SANITA_LDSC,
DIM_SANITA_SDSC,
DIM_SANITA_BUDGET_STRUTTURA*,
DIM_SANITA_LEVEL,
DIM_SERVIZ_SERV_GER_PRNT,
DIM_SERVIZ_SERV_TOTAL_LVLDSC,
DIM_SERVIZ_TIPO_SERVI_LVLDSC,
DIM_SERVIZ_LDSC,
DIM_SERVIZ_SDSC,
DIM_SERVIZ_LEVEL,
DIM_TIPO_M_TIPO_MEDICO__PRNT,
DIM_TIPO_M_TIP_MED_TO_LVLDSC,
DIM_TIPO_M_LDSC,
DIM_TIPO_M_TIPO_MEDIC_LVLDSC,
DIM_TIPO_M_SDSC,
DIM_TIPO_M_LEVEL,
QTA_PRESCRITTA,
QTA_EROGATA,
SPESA_PRESCRITTA,
SPESA_EROGATA,
OLAP_CALC
RULES
UPDATE SEQUENTIAL ORDER();
I receive error:
DIM_SANITA_BUDGET_STRUTTURA invalid identifier.
I hope in your help.
All regards
GiancarloHi,
thanks. I've created my own directory and now I found in it my file .eif.
Now i want use your script:
begin
dbms_aw.execute(q'!
" Create the AW
aw create CALABRIA_AWM
" Set the current directory
cda MY_DIR
" Import the EIF file
import all from eif file 'CALABRIA_AWM.EIF'
" Update and commit the AW
update
commit
end;
but I have a trouble about
" Set the current directory
cda MY_DIR
because I have crated MY_DIR directory on machine A and now i launch script on machine B, and both don't have any shared resource, machine B doesn't view MY_DIR directory.
What steps I must follow?
P.S. I've created my directory with following command:
SQL>Create directory EIFTER as '/opt/eifdirectory';
Can you explain step by step what i must do now? Maybe I must repeat steps made on machine A either on machine B and then launch your script?
Thanks
Giancarlo -
Copy one cube data into another cube
Dear SDN's,
Can anyone tell me how can i load the data from one cube to another cube request by request.. Like, I need all the requests available in first cube should appear in the new cube which i want to load the data.. How can i do this..Kindly advice me...
Answering getz appreciated,
Warm Regards,
AluriHi Aluri,
Well you want it request by request.
That does not make it easy.
The only thing I can think of is to
- empty the source cube,
- reconstruct the first request,
- do an init to the new cube,
- reconstruct the next request,
- do a delta,
etc.
but, depending to the number of requests this is a lot of work.
Udo -
How to troubleshoot SQL error when copying cube
I was successful in creating Info Package and running it to copy data frin cube 1 to cube2. However, I get an error when
Running the package. My source cube has 1.9 million rows. However, Info Package only loaded 30,120 records. Looking in monitor logs, it shows me following error stack:
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
When I click on long text button for Unknown error in SQL interface:
The SQL interface of the application server (DBSL) has reported an unknown error. This error can be caused by:
- Overflows when aggregated data is read from the database in ABAP. If this occurs, the definition for the corresponding key figure must be changed.
- Internal errors
It seems to be some kind of Overflow error. Is there any way to get more information on the cause
Of this erroru2026.
THANKS A LOT.I tried SM50, it shows me all processes, but I still cannot figure how to set developer trace. Following is detailed information on what I am doing in copy of cubes and errors I am getting:
Subject: Troubleshoot Copy of Cubes
I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong.
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
After error occurs I get following message in mail:
The error occurred in Extractor.
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited
at the time of the data request. Make sure that the file is in
the specified directory, that it is not being processed at the
I looked in SM21, system logs, whenever error occurs, I see the u201C
Database selection with invalid cursor &5&5
The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
My cube copying (from cube 1 to cube 2) is a straightforward procedure:
a. Select Copy from Cube 1 and create Cube 2.
b. Create Export Data Source from Cube 1 Menu.
c. From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
d. Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what??? -
When running a query of a 0IC_C03 cube copy inventory shows as blank
When loading the 0IC_C03 cube copy ZMM_C01 Cube: Material Stocks/Movements, if there
is no movements for that day in a plant the inventory values do not show when we run a query on that key date
When we create a movement type and run the extraction then the ending inventory values
will show when we run a query usig that key date.
So if there are no movements types for a plant then the inventory balance does not show up in our query reports. Once we post a
movement type for a plant and extract data then rerun our reports then the inventory balances show up.Refer link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?QuickLink=index&overridelayout=true
& check ur e-mail. -
How to copy cubes and other objects?
Hello All,
I have implemented APO -Demand Planning Project for one hub Europe in our BW system.NOw we want to roll out the implementation globally and want to copy all the BI objects for seven hubs only changing the field of hub whereever we are using it in routines.
One way of copying all the objects is XML export and import.But for that purpsoe i have to change the XML file maually.We have four cubes , ten ODSs and number of reports and lots of user exit code.Data in ODSs are coming from flat files and it is further updating Cubes.
Anybody knows here any other way to copy the cubes and ODSs and other related objects such as infosources and infopackages etc.
Thanks and Regards
Yogesh MaliYou need to change the format
double tap on the work and then you can select how much you want to copy, to paste just long press on any empty space > paste
Navigation does work, but you must make a map offline (open maps > select the area/city > menu > offline)
Don't forget to give Kudos (Click on the half star + )
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
How to create a copy cube from Business content statistics cube
Dear Experts,
I got a requirement to create the new cubes which is a copy of Business content statistics cubes.
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally . -
Hi All,
Can any one tell me what is the best way to copy the standard business content cube with all of it's underlying objects such as update rules, queries, structures, variables, etc. I am planning to make a copy of the standard cube as it is with a custom name.
Any help will be greatly appreciated.
ThanksHi Saritha,
You can copy the cube and update rules.
When you right click to create a cube, you could use the template as the custom cube and hence copy it. Similarly while creation of Update Rules, you can do the same way.
Hope it helps
Regards
GPK. -
Difference between copying cube content using datamarts and direct copying
Hi Experts,
I have been going through the SDN for the last 6 months and this is my first post
I know two methods of copying the cube content from one cube to another.
One is data mart method in which we create a datasource based on the cube and
then create a transformation between the new cube and datasource.
This method is used if our source cube is in same server or in diff server.
Other method is directly copying the cube content from source to destination
by creating a transformation between two cubes .
this is used if source cube anddestc u be are in same server.
My doubt is if both the cubes are in same server then what is diff between first method
and second method,
Please clarify meHi,
Now Iam closing this thread with a conclusion .
The question is what is the difference between copying cube
content using datamarts and direct copying
Also what are there any other methods to copy cube contents
from one cube to another.
The diff bet using data marts and direct copying is
In case of datamarts,ven if the source cube is changed in futute there is no effect on the target cube.
In case of copying directly,whenever the source cube is changed,the transformation becomes inactive.
so we have to activate the transformation again.
ALso there are some other methods to copy cube contents fron one to other .
But datamarts is sap standard one.
Thankyo every one for giving answers
Regards,
Sundar
Maybe you are looking for
-
Can I connect my lightning to USB to a travel adapter?
I have a travel adapter model: TC28SA. I used it to charge older iPods with a 30-pin charger. Can I also use it with my lightning to USB?
-
Editing iphoto Album using Pages 08
I had the issue of Mac Life that ran an editorial on how to incorporate pages with iphoto album. I THREW it out doing spring cleaning. Yes im an idiot. So... are there any links on the web or here that can help assist me in learning how to combine th
-
Has anyone got a simple step by step guide to app uploading
I have just had my app developed and the company who has developed it for me has left me to upload it - struggling big time, any step by step guides?
-
Automatically transfer planning cost centre to profit center without 1KE0
Dear Guru When create planning for cost element, and cost center through KO06 therefore the planning only can be read in cost center report , and we cannot see the planning in profit center report. We only can see the planning in profit center repor
-
Cannot view workspace_id in apex_workspaces
I create a workspace like this alter session set current_schema = FLOWS_030100; BEGIN APEX_INSTANCE_ADMIN.ADD_WORKSPACE( P_WORKSPACE_ID => 123456789, p_workspace =>'APEX_XXDL_SHARED' , p_primary_schema => 'XXDL', p_additional_schemas => NULL); COMMIT