Subject: Where are SAP Exit Variables and how to use them in Bex Query

I have seen references to variables: 0cyear (Current Year), 0CALYEAR (current year), oCALMONTH (Current month/year).
Under 0CALMONTH characteristic or 0CALYEAR I do not see any of the variables, so how does
one use these variable in the query. For example I want to create a restricted key figure: Duration restricted by Current calendar year (e.g. 2009 if I am in 2009, 2010 if I am in 2010..).

Thanks a lot. Actally, I was looking in my production system and under varaiables I did not find any SAP Exit variables,
but in development envrionment I do see some.
Why will it not show me these variables in production? Is it because:
1. Some special premssion is required to view this type of variable
or
2. THese varaiables were not installed from Business Content
It is hard for me to beleive, it is permission issue.

Similar Messages

What are variables or parameters in Apex and how to use them?

Hi
What are variables or parameters in apex and how to use them to connect and run BI Publisher Report
From Apex URL

Hello Kanaiya,
You should go here: http://www.oracle.com/technology/products/database/application_express/index.html
Look at "What is Oracle APEX?" then download the documentation and review the various PDF files that are available.
If you have a version of APEX installed and available, go through the 2-Day Application Express Developer's Guide followed by the Advanced Developer's Guide.
Good luck,
Don.

I opened iPhoto and it opened as if i just bought the computer. Where are all my photos and how do I get them back?

I opened iPhoto and it opened as if I just bought the computer. Where are all my photos and how do I get them back? Luckily for the most part, I backed up photos on my flash drive, but I had just imported dozens of pictures from my phone. I reopen iPhoto soon after and the prompt asking how I would like to start iPhoto and all came up. I selected what brought me to the iPhoto I open up to every day only without any pictures.

Are you in the correct account that contains the iPhoto Library?
Did you ever move your iPhoto Library to an external drive? If so, and you disconnect this drive, iPhoto will create a new blank one in the pictures folder.
Check your computer to see if the "iPhoto Library" was accidently moved to the trash.
If you still can't locate your images, launch finder, and select "all images" in the source column. This will display all images on your computer. Be carefull not to delete, move or modify the images you see in this manner, as it will cause issues with good iPhoto Libraries, however it may help us locate where the images are.
Once you locate an image, click it once, then in the top menu bar, select "view / show path". This will display it's location along the bottom of the finder window.
Once you know where the image is, this should help you launch iPhoto to the correct library.

HT4796 Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Hello. It looks like I recovered all my keywords attached to photos. What I did:
First I located all photos without keywords using a metadata search.
I found that it seemed to be certain groups of photos that had no keywords. I decided to at least get the main keyword on all of those in a particular group, like Canyonlands.
Once I added one of the keywords, the others all showed up magically! I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
Don't understand why this occurred or why it got fixed, since it was so random. But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
Thanks for the discussion and help.

Where are keyword files located and how do I get them into lightroom 4?

I have upgraded from lightroom 3 to lightroom 4. In many cases the keywords are missing - sort of. When I click on a single photo, the keywords don't show up. If I select a bunch of photos, the keywords show up as a group. Why aren't they listed for individual photos? How can I get them "connected" without redoing each photo? Let me know if you need more information. It seems I read somewhere that the keywords are kept in a separate file (many of these photos are jpg, so I'm not talking .xmp), but I can't find where I read this. Anyone know?
Thanks for help.
Margaret

Hello. It looks like I recovered all my keywords attached to photos. What I did:
First I located all photos without keywords using a metadata search.
I found that it seemed to be certain groups of photos that had no keywords. I decided to at least get the main keyword on all of those in a particular group, like Canyonlands.
Once I added one of the keywords, the others all showed up magically! I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
Don't understand why this occurred or why it got fixed, since it was so random. But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
Thanks for the discussion and help.

How to create a variable, and how to use the same across all the reports?

Hi,
Is there any possibility of creating a variable at once and making use of that across in all the Crystal Reports?
Thanks In advance for your time and solution.

MohanMRK,
can you describe how you get the value for this variable?
is it calculated on one report and then you want to pass it to a 2nd report? if that's the case, what you can do is have the reports linked via an opendocument link and pass the value to the 2nd report as a parameter. the value / parameter is only shared when you press the opendocument hyperlink.
please see the sdk library [here |http://www.sdn.sap.com/irj/boc/sdklibrary]and scroll down to the opendocument section near the bottom.
if you are just trying to find a way to share a calculation across reports look into creating a Custom Function which can be added to your repository. please note that this will not pass a calculated value across 2 or more reports, but will just have a shared method of making the calculation.
as Abhilash mentioned before, there's no way to use an actual Variable across 2 separate reports without them being a main report and subreport(s). in that case you'll want to look into Shared Variables.
cheers,
jamie

Why are my apps shaking and how to get them to stop

I have a Big Fish Game app on my dock that won't stop shaking the whole dock, I tried deleting it but it won't go away?

Did you try holding the Option key while dragging it off?

NI 6008 - Questions on the C APIs and how to use them

Hi
I am trying to use the NI 6008 to drive a Digital Programmable Attenuator and had a few questions. I am newbie with this device, so most of my questions are relating to figuring out the basics with this device.
1) I am hoping to be able to write a simple C program to have the NI USB 6008 drive this Digital Programmable Attenuator. Is this possible? I could find the NI-DAQmx C Reference Help file, but I cant seem to find how to build and load a program onto the NI USB 6008?
2) I would like to be able to turn ON a particular attenuation setting on the Digital Prog. Atten. at a specific instant and after a few milliseconds turn it OFF. And repeat this endlessly. I was looking for a Timer API to let me control the Digital Prog. Atten. at set timer interrupts but I am not sure if there is a way to do this. I see the APIs: DAQmxCfgImplicitTiming and DAQmxCfgSampClkTiming. But I am not 100% sure if these are the right APIs to use for this purpose. Also which APIs can I use to set the Digital lines in the DAQ to highs and lows?
Like I said earlier, I am a newbie with this device and I am not really sure if I am going in the right direction. Any help would be greatly appreciated.
Thanks
Anand

You do not load a program onto the device. Your program runs on your pc and you build your program that calls the DAQmx functions.
There is no clock for for the digital I/O. As the spec says, it is strictly software timed which means you explicitly write a true or false, one state at a time. This is subject to jitter from Windows and I would not expect rates above 100 Hz.

What is access sequence tables and how to use them in program?

hi all, I know a little about SD and access sequence tables, but I get a requriment like this:
condition type is a paramater
The condition types allowed in this report are: Note: A list of pre-defined condition types with their corresponding access sequence tables will be defined.
How can I make it? How can I use it in program to get the price?

Hi,
An access sequence is a search strategy with the aid of which the SAP
System searches for valid condition records of a certain condition type.
For example, you can stipulate for a price that the SAP System first
searches for a price for a specific plant, and then for a generally
applicable price.
For condition types for which you wish to maintain conditions with their
own validity period, you must assign an access sequence. With this, you
define which fields the SAP System checks in searching for a valid
condition record.
e.g. When you create condition record (e.g. Purchasing condition record) you enter condition type, system asks you the key combination to enter the entries. These key combinations are nothing but the access sequence. On the basis of combination of condition table it will search record. e.g. when u maintain condition record with acc seq Material/plant combination, it will transfer the same record in PO when u enter same material and plant in the PO.
Example:
An access sequence has been assigned to condition type PB00 so that
prices can be maintained in purchasing info records and contracts.
No access sequence has been assigned to condition type RC00 because it
does not have a validity period of its own. In the standard system, it is
always maintained simultaneously with the price and is valid for the
period of the price.
For more help
http://www.sap-img.com/materials/steps-for-mm-pricing-procedures.htm
Regards,
Raj.

Combo_boxes and how to use them

I'd like to be able to type a search term into a combo box and, with each typed character, i'd like to perform a SQLite query and get back results that influence what items appear in the popup menu part of the combo-box. I've been able to do this with a popup_menu and a separate edit_field, but it takes up too much room in the user interface. ideally i'd like to be able to do it from a combo_box. but there don't seem to be enough hooks into a combo_box to do this. take for example the value parameter. while a variable bound to it will contain the text typed into the combo_box, it also contains the value of whatever item is pulled down in the popup menu. this leads to confusion and none of my experiments have been able to get values typed into the combo_box to actually produce new SQLite queries on a character-by-character basis (yes, i tried adding immediate=true to the combo_box instance when i created it).
that said, i'm going to guess that (like everything else in the SDK), there are parameters i can set in a combo_box to deal with the text typed into it and the item selected by the popup separately. i just don't know what they are because they are not mentioned in the documentation for a combo_box. or i'm wrong and what i am requesting is impossible. but i thought i'd ask here first.

HI Victor,
I meant the validate function - it would be clarified if you download the test plugin (see link a few posts up).
Here is guts of the code:
vf:push_button {
    title = "Push me... (perform test)",
    action = function( button )
        LrFunctionContext.postAsyncTaskWithContext( "Test", function( context )
            local efValidated = false
            local cbValidated = false
            context:addCleanupHandler( function( status, message )
                if status then
                    local m = {}
                    local c = 0
                    if efValidated then
                        m[#m + 1] = "edit-field validator was called"
                        c = c + 1
                    else
                        m[#m + 1] = "*** edit-field validator was NOT called"
                    end
                    if cbValidated then
                        m[#m + 1] = "combo-box validator was called"
                        c = c + 1
                    else
                        m[#m + 1] = "*** combo-box validator was NOT called"
                    end
                    if c > 0 then
                        LrDialogs.message( section.title.." completed without an error being thrown - "..table.concat( m, ", " ).."." )
                    else
                        LrDialogs.message( section.title.." failed! - no validators were called." )
                    end
                else
                    LrDialogs.message( "*** "..section.title.." ended - an error was thrown: " .. ( message or "?" ) .. " - push '"..button.title.."' button to perform test again, if desired." )
                end
            end )
            props.efValue = "Edit this - validator should get called when you do"
            props.cbValue = "Edit this - validator should get called when you do"
            props.items = {
                "No worthwhile items...",
            --[[ validate function spec -
                Parameters:
                    view (LrView) This control.
                    value (any) The value to validate.
                Returns three values:
                    result (Boolean) True if value was valid.
                    value (any) The new value.
                    message (string) If result is false, an error message.
            local function validate( viewObject, value )
                props.items = {
                    "One", "Two", "Three", "...",
                return true, value
            end
            local vi = {
                vf:row {
                    vf:static_text {
                        title = "Edit field:",
                        width = share 'label_width',
                    vf:edit_field {
                        bind_to_object = props,
                        value = bind 'efValue',
                        --items = { 'no worthwhile items' },
                        immediate = true,
                        validate = function( vo, value )
                            efValidated = true
                            return true, value -- false, "edit-field validator was called", "edit-field validator is ok"
                        end,
                        width_in_chars = 30,
                vf:row {
                    vf:static_text {
                        title = "Combo box:",
                        width = share 'label_width',
                    vf:combo_box {
                        bind_to_object = props,
                        value = bind 'cbValue',
                        items = { 'no worthwhile items' },
                        immediate = true,
                        validate = function( vo, value)
                            cbValidated = true
                            return true, value -- false, "combo-box validator was called", "combo-box validator is ok"
                        end,
                        width_in_chars = 30,
            local args = {}
            args.title = "Test"
            args.contents = vf:view( vi )
            LrDialogs.presentModalDialog( args )
        end )
    end, -- action func
Problem: validate function (of combo box) not getting called - what am I doing wrong?
PS - validate function of edit-field is getting called.
Rob

TABS and HOW to USE them

does anyone know how to make basic tabs?

have i used tabs? no way. you put them on your tongue and they make you crazy.
real berkeley. you know what i mean.

Zip or Jar files and how to use them

Hi ,
I have this problem. I have some .class that must be
packaged some way to deploy in the application user's directory. At some point of the execution the application will ask to create some object define in one of that classes I mentioned. So how can I package those classes, in a jar file or in a zip file? And most important will it work out ?!.
Many thanks in advance.

Using JAR Files: The Basics

How to use moving maximum in query desighner

Hi All,
i am new to BI, please help.
I have a requirement to find the maximum and minimum posting date for an article.
For this i would need to use the moving maximum feature of the query. where to find this function and how to use it.
please reply
thanks,
kushagra

Hi,
Max/Min functions can't be applied on characteristics. I'm not sure but you can try using a formula variable or exception aggregation.
--Akashdeep

How to find out the customer exit and sap exit variables created provider?

Hi all,
How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
thanxs
haritha

Hello haritha,
SAP Exit and Customer Exit variables are created for Characteristics and not for individual InfoProviders.
So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
So the same Exit can be in one or more InfoProviders.
Hope it helps.
Thanks,
Chandran

How to view output of SAP Exit variables

Hi All,
I want to view the data of standard SAP Exit variables. For example, for displaying the current date, SAP has provided some variables to use in the report. Can you please guide me where to get all the variables and how to see the output of these variables.
Thanks.

Hi,
1) In Business Content all the variable will available.
2) If you will proper standard variable in your report, there is no need to check still you need to check then use RSRT tcode, give the report name and execute with EXECUTE+DEBUG option.
3) for example current calender day data need in report then standard exit variable to you character sticks or depend upon same logic directly use in your key figure, in this case for that key figure value always current day date.
4) it may helps you and elaborate your idea and explore your issue for further discussion.
Thanks & Regards,
Srinu.Raport

Subject: Where are SAP Exit Variables and how to use them in Bex Query

Similar Messages

Maybe you are looking for