Subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fdemd not exist

During installation of PI 7.0 gives message
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fdemd' does not exist on the 'localhost' host.

Hi Deepak,
I have never faced this error but i came across a description of it on the net. I guess there are some necessary drivers that are needed to be installed prior or should have been present are missing.
Also i check for "Services\fdemd" never found anything like it. Can you confirm the spelling.
"The Services subkeys under the following registry path contain parameters
for the device drivers, file system drivers, and Win32 service drivers:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
The name of each Services subkey is the name of the service, which is also
the root of the name of the file from which the service is loaded. For
example, for the serial mouse, the service name and Services subkey name is
Sermouse. The file from which this is loaded is:
SystemRoot\SYSTEM32\DRIVERS\SERMOUSE.SYS."
For further reading refer:
http://support.microsoft.com/kb/103000

Similar Messages

IPad air not recognized in Windows 7: Error: \SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Verify that you have sufficient access to that key, or contact your support personnel.

Hello everyone.. I recently bought iPad air and I am trying to connect it to my windows 7 notebook. And so I am trying to install itunes in windows 7. But I keep on getting the error message:
"\SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Verify that you have sufficient access to that key, or contact your support personnel."
I already did this: http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx that was given in this thread:
https://discussions.apple.com/thread/1558225?tstart=0
But unfortunately I still get the error message during installation. If I ignore that and continue installation, iTunes is installed and seems to work. But my windows does not recognize my iPad. I read somewhere that iPad driver is in iTunes.
Please help... thank you very much.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

ITunes error: Could not write value ManageLLRouting to key \SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Itunes was not installed properly.

I received the following iTunes error after installing itunes as an adminstrater on my computer using a 64 bit and windows 8.1 operating system: If you wish to import or burn CDs, you need to reinstall iTunes.
I tried the installation trouble shooter and received the following error: Could not write Value ManageLLRouting key\system\currentcontrolset\services\BonjourService\Parameters.
How can I fix Could not write Value ManageLL Routing Key error and install iTunes correctly? Must I uninstall Norton 360 degrees Antivirus program before installing iTunes.
I look forward to your tecniical support .
Cheers,
clinton86

Hi clinton86,
Welcome to the Apple Support Communities! I understand that are receiving an alert when trying to import a CD to iTunes and are being asked to reinstall iTunes. iTunes and all of its components must be removed in a specific order when uninstalling from a Windows computer. Please use the following article as a reference.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
I hope this helps,
-Joe

What do I do when I get an error message: Could not write value ManageLLRouting to key\SYSTEM\CurrentControlSet\Services\BonjourService\Parameters. Verify that you have sufficient access to that key, or contact your support personnel?

What do I do when I get an error message: Could not write value ManageLLRouting to key\SYSTEM\CurrentControlSet\Services\BonjourService\Parameters. Verify that you have sufficient access to that key, or contact your support personnel?

See Troubleshooting issues with iTunes for Windows updates for general advice.
For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows but apply it to the branch in question.
In this thread the OP found their AV solution appeared to be blocking access to the registry.
tt2

Error IW351-------System: Status object does not exist

Hello,
I am getting bleow error while saving service order.
System: Status object does not exist. Message Numner IW351
Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
USEREXIT_SAVE_DOCUMENT_PREPARE in MV45afzz.
When i Try to save the service order i get the error messages which is coming from my validation
After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
As soon as i click on that i get a STOP messgae.
Which i as below.
System: Status object does not exist
If I comment all my code and write only error message then it comes.
but it does't come for information and warning message.
actually steps are
1. go to IW51
2. create notification then service order then sales order
3. if product hierarchy is different for material then it should display error on saving
4. it is giving error message(my error message)
5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
which turn me out of transaction.
but if i click on advance shipment icon without pressing enter its working fine..
my error message is a normal error message .
message e038(zcrm)
" service line must be same".
pls suggest.
Regards
LOKESH

Hi,
After MESSAGE add STOP. :
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
STOP.
or If ambiguity with usage of STOP being obselete use EXIT after message.
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
EXIT.
BR
Dep

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\HyperionPlanning not exist

Hi Everyone,
Hyperion planning 11.1.2.2 installed in howevere HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\HyperionPlanning not exist in regedit . any idea ?
Thanks,
Hany

I take it a windows service does not exist for planning either, maybe you have deployed without the option to create windows services in the config utility
Cheers
John

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Source system BID-010 does not exist

Hi,
I have installed BI statistics in BI 7.0 in Dev.While transporting to QA system, I am getting the following error message:
"Source system BID-010 does not exist"
Can anyone please help!!
Thanks,
Dipti

Hi Siggi,
Thanks for your reply.Logical system BID was not there in QA.I have made the required changes.
I also received an error as " There is no DataSource with these attributes
Reference to transfer structure 0TCTBWOTYPE_TEXT_HA not available. No activation possible. "
I checked in table RSTSODS ,transfer struct 0TCTBWOTYPE_TEXT_HA" is active.
Can you please help..
Thanks
Dipti

Opencard.core.service does not exist

when i am using build_sample.bat for building java card samples i am getting the following errors:
Building the client part of RMI samples...
C:\java_card_kit-2_2_1\samples\src_client\com\sun\javacard\clientsamples\purseclient
\PurseClient.java:18: package opencard.core.service does not exist
import opencard.core.service.*;
I installed OCF1.2 and put the base-core.jar and base-opt.jar in java_home\lib
what else i have to do?
why its not finding this package?

Have you searched this forum to see if this has been answered a million times before you posted ?
Sun took the time and energy to supply a readme that outlines supported platforms and the supported JDK. Read it.If you still can't figure it out, come back.

PowerPivot - SP2013 - Cannot create the service instance because the parent Service does not exist

Unable to setup PowerPivot using PowerPivot configuration tool.
I have One server which has SQL 2012 SP1 and SP2013.
The farm is configured with all service applications.
SQL has default instance with DB Engine and SSAS Tabular. Reporting Services has been configured using SharePoint mode and has a service application.
The Power Pivot instance is set up with DB Engine and the SSAS.
I keep getting this error. Ive tried so many times uninstalling, making sure features removed, rebuilding the farm (thank god for autospinstaller..)
11/07/13 12:06:17:6858 Verbose: CreateSystemServiceInstance.NeedsExecute
11/07/13 12:06:17:6858 Verbose: Running function IsFarmConfigured to check whether SharePoint is configured regardless of availability
11/07/13 12:06:17:6858 Verbose: Farm is configured
11/07/13 12:06:17:6858 Verbose: Entering function GetService(Guid)
11/07/13 12:06:17:6868 Verbose: Service is not installed.
11/07/13 12:06:17:6868 Verbose: Service instance not found in local server.
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.NeedsExecute(True)
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute(True)
11/07/13 12:07:41:5662 Verbose: CreateSystemServiceInstance.Execute
11/07/13 12:07:41:5682 Verbose: Entering function GetService(Guid)
11/07/13 12:07:41:5702 Verbose: Service is not installed.
11/07/13 12:07:41:5702 Verbose: CreateSystemServiceInstance.Execute(Skipped)
11/07/13 12:07:41:5702 High: Cannot create the service instance because the parent Service does not exist.
11/07/13 12:07:41:5702 High: Prerequisites check for execution failed. Farm is not in a valid state.

Did you install the PowerPivot add-in for SharePoint? There are 2 parts to this - the SQL Server Power Pivot for SharePoint which is the Analysis Services instance running in Tabular Mode and the PowerPivot Add-in. The last line in your error message seems
to tell you that you have a missing component in the farm, possibly the PowerPivot Add-in
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

"Service does not exist" Errors in CATS when entering Service PO

Hi Experts,
I'm currently working on the integration of CATS with MM-SRV. When I enter a timesheet with reference to a PO (containing items with service masters) in CATSXT, I receive an error message stating "Service does not exist".
I've found OSS note [653209|https://websmp130.sap-ag.de/sap/bc/bsp/spn/sapnotes/index2.htm?numm=653209], which states that the service must be entered manually at the timesheet entry.
However I'm unable to find a "service" field anywhere in the CATSXT screen, or in the IMG activity "Cross Application Components -> Time sheet -> Settings for All User Interfaces -> Time Recording -> Choose Fields"
Has anyone encountered this issue before? How is it resolved?
Thanks in advance for the help,
Mark

Hello experts,
I am facing the same problem as Mark, and I can't find a "service" filed anywhere in CAT2 or IMG.
Mark, could you solve your problem? If so, could you explain me how you did?
Or did anyone else solve this problem?
I thought of using a user-exit in order to bring the service number in a user defined field. Is there a standard user-exit that can do so?
Thanks in advance.
Fabien

Cross system company code does not exist.

Hello,
I am trying to upload Cost center through IDOC menthod.
Message type of IDOC is : COSMAS
Basic Type : COSMAS01
But i am getting a error as Cross system company code does not exist in ( Create IDOC Overview).
Kinly help me in resolving this issue.
Regards,
Hemanth.
Edited by: hemanth kumar on Feb 20, 2009 3:08 PM

Hi Shweta
Have you checked with the data i.e. company code .
May the company code which you are passing is not there in ur receiver system.
Just check it out.
Regards
-Mitesh

Subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fdemd not exist

Similar Messages

Maybe you are looking for