Submenus all over the place after burning dvd

When I burn a dvd of a project, all the menu's are in the correct order and alligned. When I burn a dvd and check it on my stand alone dvd-player, the menu's are no longer properly aligned with eachother.
Anyone any ideas what causes this? Is this caused by the theme I'm using? I've heard about corrupted theme's and the influence of using music in a theme on the layout of the dvd.
thanks for any advice!

Do you have the View TV Safe Area enabled to make sure non of the links extend outside of that area? What theme are you using? Are these text links?
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
This way you can check the alignment of the links before burning to disk.
NOTE: the order of highlighting the links by the DVD player remote is in the order that the links were added to the menu. If the links were moved and reordered that order can be pretty convoluted when using the DVD remote (or commonly known a the "clicker" to real men).
OT

Similar Messages

Screen icons all over the place after wake up?

I have found recently that sometimes after I wake my screen up after sleep that the dock is missing and my apps are all over the place and i have no home screen anymore?! Has anyone else come across this? I also found that sometimes my screen goes bright white and nothing seems to fix it apart from resetting it by holding down the home button and the screen off button. Would love to find out if this is simply a few bugs in the software and not a glitch in the phone! Thanks

Hi Peter,
Are you using any accessories with the iPhone?
Try restoring the iPhone to rule out any issues with the iPhone software. This article: http://support.apple.com/kb/HT1414 will walk you through restoring the iPhone.
-Jason

Why is my page or connection jumping all over the place after my recent update to firefox 5.0

I came back from a week away and when I got on the internet firefox had updated to 5.0 and ever since then my pages just jump all over the place Why?

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

HT203301 iPhone 4S compass 180° out and other times all over the place after ios7 update. Anybody else had this?

Since updating to iOS 7 the compass on my iPhone 4S is all over the place but mainly 180° out tried calibrating rebooting etc etc and no difference.!

Nope, i generally hate iTunes for it being annoying and incredibly "damaging" to the computer (slows my computer down a shitload when booting atleast), so I've avoided it at any costs till now. Shame apple "forces" us to use their more "******" apps in order to "guard" ourselves against stuff like this... I'll survive, the most important pics are on facebook, and the apps and contacts I can easily replace. For my part Apple has one life less when it comes to me buying another product from them.
Thanks for all the replys , i appreciate a community like this!
- Knut

Webpage rendering images all over the place after 8.0.X

Whenever I open a web link from the financial 'stock' application, it loads normally with small fonts as usual but when double-tabbed to magnify to full screen, two things will occur:
1. the keyboard pops up which is very annoying
2. images rendered all over the place in magnified full-screen mode.
Just updated to 8.0.2 and problem still persists.

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Why does my audio jump all over the place after detaching it

in iMovie HD you could extract audio then work with clips over it, in 09 I can't do anything. I extract/or detach the audio, but it is still attached or something. if you put a clip in the project widow the whole thing moves over, not just the video. So I saw the tutorials and they said you can replace a clip. but no window opens up over the clip??? any help

After detaching audio, it is easy to drag the audio to some other place in your project.
If you want to put clip A on top of a portion of clip B while keeping the audio from clip B, this is easily done. It is called a cutaway in iMovie 09.
First go into iMovie Preferences and turn on the advanced tools.
Select clip A so that it has a yellow border around it. This can be from the Event or from the Project.
Now drag clip A and drop it on Clip B at the point where you want the cutaway to begin.
A popup menu will come up. Select "CutAway"
You are done, but you can fine tune it if you like.

Is anyone else having sensory issues since updating to the IOS 7.1.1? My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Music library after data recovery - ID3 tags all over the place

Hi,
For a short time there i was using my external drive as my music library, while i sorted enough space ot run it from C:
However, that didn't last long and i was asked if i wanted to reformat the drive.
Using Easeus I was able to recover the mp3s. But they're all over the place i.e songs labelled as one thing will be something else, about 70% of the time. Also some songs randomly chnage to others.
Is there any method i can use to resolve any of this, without re-doing my entire collection?
thanks for any suggestions
matt

The best option is to recover from backup, but I guess you don't have one. You can also recover from an iPod if you have one:
http://discussions.apple.com/message.jspa?messageID=9990366#9990366
Failing that, are you certain that the tags are wrong in the actual files, the tags are part of the file, so I am surprised if they were changed if you were able to recover the files successfully. It is hard to see how they could be messed up if the file is OK unless something else messed with them.
I am afraid you have a lot of work ahead of you. You might be able to use a tag editor to get tags from the internet - MP3 tag is an example, but I think the tracks need to be arranged into CDs for this to work.
There is also something called PicardTagger which is supposed to use the audio footprint of the file to identify it, but I have no experience with it myself.
http://musicbrainz.org/doc/PicardTagger

Battery all over the place

I have a three month old MBP. I often browse the forums to inform myself on what's up before it happens to me. I found out about the battery update that way, and did it. I read about the possible problems that may occur, but I am not sure my problem fits - or if it even is a problem.
My battery used to last for a really long time - 4 to 5 hrs. Now it doesn't. I usually only use my MBP for surfing and occasionally downloading music or movies from itunes (haven't done that since the bat. update tho).
After experiencing shorter and shorter up time, I decided to really keep an eye on it this morning. Last night I got the message that it was running on reserve power, (and I was too) so I plugged the power cord in and shut it down for the night. This morning I unhooked the power, started it up and the time left read 5:32 for about a second or two and then read 2:32. I used it for a few minutes, walked away - the display went to sleep - I woke it up and it read 4:50. After that I let the display sleep several times and every time I woke it up I got a different reading - all over the place. 6:xx - 3:xx -4:xx and so on. I then decided to browse this discussion area and couldn't find exactly this scenario. I have been on for about 15 minutes and the time has stayed within a range of 3:05 to 2:42. I am going to let it go into full sleep and come back to finish up this post. Oh...by the way:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 5189
Remaining Capacity (mAh): 4531
Amperage (mA): -1494
Voltage (mV): 11967
Cycle Count: 37
I'm back. Time left reads 2:22 - seems normal enough for being gone about 20 minutes. Power readings:
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 5188
Remaining Capacity (mAh): 3695
Amperage (mA): -1522
Voltage (mV): 11796
Cycle Count: 37
But where has my battery life gone? I guess what it says now is a true reading, but since I have only had the computer unplugged from the power for about 1.5 hours, and it has been used for only about 25 minutes, isn't this a short period of life? It used to sit practically all day on battery power only being used once in a while. I am going on vacation in two weeks and I don't think this battery will even get me through one dvd movie on the plane - on a three month old computer! Any thoughts?
sj

Sarah,
The two cruical numbers for the estimate of the time remaining are the remaining capacity and amperage. If you divide capacity by amperage you will get the time estimate.
These values update relatively slowly - about every minute or so. This can lead to weird values when your computer changes its activity quickly.
Thus, right after you wake the computer up or reactivate the screen it is likely that the amperage will be low (because it doesn't use much power in sleep mode or with the screen off) and the time estimate will be high. Similarly, just after you unplug the computer the amperage estimate will be low (because it is just the amperage drawn from the battery). I have seen estimates of over 200 hours right after I unplug the AC. But as soon as it updates it all sorts itself out.
Your battery seems to be behaving normally and 5200mAh seems about right for a 15" MBP battery. They start at around 5500mAh and decline from there. Apple suggests that you should get around 300 cycles before it drops below 80% of initial capacity (4400mAh for the 15" MBP battery).
The number one hint for getting longer life out of your MacBook is to turn the brightness of the screen down. That is typically the biggest drain on the battery.

Video Dimensions all Over the Place

Hello there,
First off you'll have to excuse me as I'm pretty new to the whole video side of things. Well the problem is, I've created a DVD which is supposed to go to a client fairly soon - and the problem is while viewing it the screen size is jumping all over the place. I have video elements provided by clients which i imported as timelines, i have menu's with static backgrounds and i have timeline menu transitions which are dynamically linked from after effects.
The only part of the dvd that appears full screen (16x9) is the dynamically linked transitions. They are 720x576 D1/DV PAL Widescreen and are set to 16x9 in encore (greyed out).
The video stuff from the client is 720x405 Square Pixels set to 4x3 in encore (greyed out). This appears letter boxed and pillar boxed.
The menu stuff is 720x480 D1/DV NTSC Widescreen set to 4x3 in encore. This appears letter boxed and pillar boxed.
After reading what i've wrote in my last few sentences, i can now see the problem is because nothing is the same! So the question is more now what i do to correct it. Do i resize the client video and the menu images to 720x576 D1/DV PAL Widescreen? And if i do this will it crop the video or will it squeeze the video etc. on a 4x3 screen?
Thanks for the help,
Steven.

_Bano wrote:
Ok, now I've resized all menu's and assets to 720x576 D1/DV PAL Widescreen (set to 16x9 in encore). On a 16x9 screen everything is looking very sexy indeed, but on a 4x3 screen it is letterbox. I tested this with a regular DVD which adjusts to fill the 4x3 screen.
Any quick way of achieving this?
It may be possible, but not with Encore - a menu is either full 4:3 or full 16:9, but not both. Similarly, 16:9 video from Encore will play back letterboxed on a 4:3 screen.
An additional note: not all commercial DVDs behave in the way you describe - sometimes menus are either 4:3 or 16:9, but not both, and nearly always 16:9 video is displayed letterboxed on a 4:3 monitor.

Why does iDVD store stuff "all over the place"? Project now broken

Hi all,
did an hour long family movie project, and in the meantime cleaned up my documents folder and deleted some stuff that I thought was internet downloads etc, or extra working files.
Turns out it was the important audio stuff for iDVD!
I've broken my project... the stuff was obviously important, and now when I open this project it has a big broken chain on it.
Why does iDVD store important stuff "all over the place" like that? I mean, it's confusing enough (for newbies) to learn where the events and where the projects are stored, but why does it strip off the sound and store them in documents where ANYTHING could get deleted?

Just to add, an iDVD project should be thought of as a shell, an empty container. It has references to the media files used in it, but does not actually contain these files. The files remain in their normal locations. When you burn to disk, or create a disk image file, iDVD pulls these files just for encoding onto a DVD disk or into a disk image file. It does not really move these files into its project files. Your iMovies, photos and audio files remain where they are. If you move, change, rename or delete any of these files, iDVD will not be able to locate them, and you will see the broken link images.
For this and several other reasons, it is a good idea to leave everything alone and not go deleting any files until you have finished your iDVD project.
Then, when you are ready to burn it to DVD disk, be sure to do a 'Save as disk image' to create a disk image file of the project. This process looks like the burn process, and the encoding will take just as long, but the end result is a self-contained disk image file, not a burned DVD disk.
The advantage of the disk image file is that you will have an exact copy of your iDVD project with all the media files encoded into it. You now can safely delete all the media used in this iDVD project without losing the project. Now you can clean up your documents folder! Deleting all the files used in the project will also save you drive space.
You can save disk image files as backups and can move them to external drives or other computers. You can burn DVD disks from disk image files using Disk Utility or Toast. You don't have to worry about your burned DVD disk breaking/melting or having something spilled on it (kids in the house!). You can always get the disk image file and burn another copy. (Great for the relatives who somehow 'lose' the great DVD you made for them!).
You cannot edit the disk image files however, so you should be creating one only when your project is completely finished.
If you wish to save all your iDVD files while you are working on a project, you can archive your iDVD project. I have not found the need to do this, but the link J Keller gave you for the tutorial explains how to save as archive and as disk image. Obviously, the archive project will be larger since it is saving all the media. Archived projects can also be moved to other drives or computers.
Hope you can recreate your project.
Note to J Keller: the video tutorial was quick and gave the brief how-to and why. Nothing complicated.

HT1926 I was prompted to install iTunes 11.1.4 this morning. It failed (first time EVER) with the comment that 'msvcr80.dll' was not available. Upon searching for that .dll in my computer, I found it to be all over the place! Thoughts?

I've NEVER had a version update fail. I did go to 'Tools' and download for a manual install of this update as the info screen suggested. It, too, failed. After searching for the 'missing' msvcr80.dll on my computer, I found it all over the place!
Ran a malware & virus scan with nothing evil popping up.
Tried going back to a restore point before a previous update and doing the install. It failed.
OS: Vista Home Premium x64, SP2 (and current with all MS updates)
Now I'm pretty nervous re: syncing with ANYTHING-especially my iPod that has all my music I teach from at work.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

How to get rid of duplicate addresses all over the place?

Duplicate addresses appears all over the places: on my mac (in the mail program) and in my ios devices.
I suspect that it occurs during some synchronisation activities but how to get rid of this once and for all?
Thanks for your help. It helps also if some tell me that I am not alone in that kind of trouble

iCloud- Resolving duplicate Contacts after setting up iCloud Contacts

Why is the webpage jumping all over the place with parallax scrolling?

Hi all, I'm getting a little frustrated here... I've built a looooong (10,200 pixel) parallax scrolling site, when I click 'Preview' it plays like a dream, but when I render the HTML, view in browser or publish to business catalyst to view, it just jumps all over the place. I realise that the page is extremely long, I'm thinking it could be that but just need to clarify it before I rework it all and maybe find out after, that it was something else that was causing it to happen.
Your views would be greatly appreciated!

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

My fonts are all over the place, how do I get them back?

Recently some of pages I view in Firefox have the text scattered all over the place and makes them impossible to understand. How do I get them back to normal? I am using a 2 x 2.8Ghz Quad Core Intel Xeon Mac, 12GB RAM running OSX 10.9.5 and Firefox 37.0.1. I have attached a screen shot of my Facebook Page to try and help explain my dilemma. Regards, Mal

You can check for corrupted and duplicate fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html
You can try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Submenus all over the place after burning dvd

Similar Messages

Maybe you are looking for