"Submission status" error while posting comments using evcom

Hi friends,
I am  getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated.  Submission status must be modified to allow changes.
     010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Similar Messages

  • Error While Posting documents using F-28

    Dear Friends,
                            While posting Documents using 'F-28' after I passed posting key and account number I m getting the Error
    'Entry not Possible'. Can anyone tell what may be the problem how to clear this error.
    Regards
    Balamurugan N
    Moderator message: duplicate post locked, follow up on your previous one instead of opening a new thread for the identical problem.
    Edited by: Thomas Zloch on Apr 26, 2011 8:34 PM

    Hi,
    I Guess this error is occuring because of the posting key and account number (Account type) combination is not correct. For each account type a perticular posting is is defined for debit and credit entries.
    Check with your functional the correct posting key for account type and account number you are using.

  • Getting error while posting GR using IBD from BAPI_GOODSMVT_CREATE

    Hi Experts,
    While posting GR from IBD using BAPI_GOODSMVT_CREATE with all necessary values like plant,material,mvttype and serial numbers etc...
    getting error from BAPI return "1  E VLA 315 Item 000010 requires serial numbers; use the inbound delivery dialog".
    I have tried with same IBD number from Tx: VL32N able to post Goods receipt successfully with above data,but whereas tried to post same IBD with Tx:MIGO getting same bapi error as above mentioned.
    I have tried with solutions some of the blogs from SCN but no luck
    is it necessary to implement this note in my system?
    Error message VLA315 during GR for inbound deliv. using MIGO
    Can you please give me suggestions what i have missed in my code/Configurations.
    Thanks,
    Syam

    is it necessary to implement this note in my system?
    Error message VLA315 during GR for inbound deliv. using MIGO
    Yes. Installing notes using Tx SNOTE is very easy. If you find a note that is relevant for your system, just install it.

  • Error while posting material using transaction code MB1C

    Hi Experts,
    While I am trying to post material into warehouse its giving warning message initially as : MAT  IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
    MESSAGE NO: M7133
    Diagnosis
    Material is a missing part of plant
    when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
    MESSAGE NO: L9023
    All the materials that you use within a warehouse no must also be defined for this warehouse no.
    Can Any one please explain me how to resolve this error in detail.
    Thankyou
    SAHER

    Dear Siraj,
    I have extended the material to warehouse numbers as you suggested.  Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
    then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
    Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
    MESSAGE: L9009
    Thank you,
    SAHER.

  • Getting error while posting doc using BAPI BAPI_ACC_DOCUMENT_POST

    Hi,
    I am passing the value for posting key in BAPI through TAX_CODE field in ACCOUNTGL (parameter name under tables).
    It is giving error "Tax code 01 in procedure TAXR0 is invalid".
    Can anyone help me to solve this .

    Try in these :
    BAPI_ACC_DOCUMENT_POST error
    Error in using BAPI_ACC_DOCUMENT_POST (urgent!!)
    BAPI_ACC_DOCUMENT_POST - Check error
    Regards
    Neha

  • Error while posting initial quantities using stocktaking template of DTW

    Hi All,
    I am getting this below error while posting initial quantities using stocktaking template of DTW.
    Can not find this object in B1Application-defined or object-defined error65171
    I am using B1 8.8 PL10 version. Below is my sample txt file data
    ItemCode WarehouseCode Counted
    ItemCode WarehouseCode Counted
    CHA0002 1 500
    CHA0076 1 4000
    Any help is appreciated.
    Regards,
    Noor Hussain

    Hi Gordon,
    Thanks a lot for your time. I am able to post the quantities. Now please let me know how to update the item cost/price for these items using DTW ?
    Regards,
    Noor Hussain

  • DTW error while posting initial quantities using stocktaking template

    Hi All,
    I am getting this below error while posting initial quantities using stocktaking template of DTW.
    Can not find this object in B1Application-defined or object-defined error65171
    I am using B1 8.8 PL10 version. Below is my sample txt file data
    ItemCode     WarehouseCode     Counted
    ItemCode     WarehouseCode     Counted
    CHA0002     1     500
    CHA0076     1     4000
    Any help is appreciated.
    Regards,
    Noor Hussain

    HI,
      The error might be because of the cell format of warehouse code. Check if the warehouse code in the system is "1" or "01". If it is "01" u need to change the format of the cells to text or else just put the symbol (  ' ) before  the warehouse codes. This might solve your problem.
    Thanks and regards.
    Pritesh.

  • Error while posting mb1c

    He seniors,
    I am getting error while posting stock in T. code- MB1C
    Error- G/L account 799999 dose not exists in company code.
    dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
    thanks......

    Dear Sundyeep,
    As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
    CHART OF ACCOUNTS (MOST URGENT)
    Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
    Thanks,
    Davinder
    Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM

  • Error while posting billing documents

    Hi,
    I am trying to post billing documents for accounting , but I am getting some error related to number range.
    I have checked number range assignments, where else I can check to find out error.
    Regards
    Nidhi

    If you are getting error while creating billing document -
    Check your number range status assignment in T-Code - VN01
    If any userexit is used then check in Userexit MV60AFZZ. There could be a Z-table where the number range may not be properly defined for the Billing Type/ plsnt/etc. as per the settings.
    If Billing document is created and you get this error while posting-
    Then it would be error with the number range for Accounting Document. Pls. ask the FI person to fix this.
    If the above does not solve - pls. mention the exact error with error code.
    Thanks

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

  • Error while creating stock using tcode: MB1C

    Error while creating stock using tcode: MB1C
    The Error is: Check table T004F:entry G006 does not exist

    Hi ,
    Please check the FSV (field status variant) for your company code in OBY6 .
    then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
    if not please maintain it.
    Thanks & Regards
    Anshu

  • Error while Loading Budgets Using AMG

    Error while Loading Budgets Using AMG
    Dear All,
    I am trying to load Budgets into ORACLE Projects using AMG API's..
    I have developed PL/SQL which uses below procedures of pa_budget_pub package.
    init_budget;
    load_budget_line;
    execute_draft_budget;
    baseline_budget;
    Procedure execute_create_draft_budget fails with following error message.
    error message: Please enter a valid product code for this project.
    error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
    error message: Project: AC044. Please specify a valid resource list.
    error message: Project: AC044. Please specify a valid resource list.
    Could somebody explain me how to resolve this error message and load the budget lines.
    Thanks in Advance.
    Afsal Basha.

    What I'm saying is, verify the column name. Dont post if not possible.
    Example follows, with one table intentionally "hidden".
    SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
    SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
    TABLE_NAME                     COLUMN_NAME
    tEsT                           MaxNumber
    tEsT                           MaxnumbeR
    teST                           iD
    teST                           MaxNumberHth,
    Fredrik

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error while posting parked documents

    HI ALL,
    After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Please check it.
    Thanks!

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Error while posting 561 Document

    Dear All
                Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
    Even OBYC setting for that valuation class already assigned.
    please advice.
    Regards
    Kumar.

    Hello Anandhakumar ,
    please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
    and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
    it could solve your query.
    regards,
    Ninad Kshirsagar

Maybe you are looking for