Submit background job for a report
Hai Friends,
I want to submit a report in background which should run on first monday of every month. otherthen SM36 and SM37. Because we cant give date and time like this.
If any coding required Pl give me the code.
regards,
vamsykrishna.
This is the Basic code to Achieve that.
Call Function 'JOB_OPEN'
SUBMIT RSBDCBTC
via background Job <Job info>
With QIE = <QID Returned by BDC_OPEN_Group FM>
AND RETURN.
Call Function 'JOB_CLOSE'
2) Also go through this
DATA: lv_job_name LIKE tbtco-jobname,
lv_job_nr LIKE tbtco-jobcount,
lv_job_released TYPE c,
lv_job_start_sofort TYPE c,
lv_print_parameters TYPE pri_params.
lv_job_name = 'Z_BGPROGRAM'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = lv_job_name
IMPORTING
jobcount = lv_job_nr
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF syst-subrc = 0.
" submit job with all the selection screen params...
SUBMIT (lv_job_name)
WITH applfile = applfile " these are the parameters of the background program
WITH p_lines = p_lines
USER syst-uname " you must use this
VIA JOB lv_job_name NUMBER lv_job_nr AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = lv_job_nr
jobname = lv_job_name
strtimmed = 'X'
IMPORTING
job_was_released = lv_job_released
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF syst-subrc <> 0.
MESSAGE i162(00) WITH
'An error occured while closing the background job.'.
STOP.
ENDIF.
ENDIF.
ENDIF.
SKIP 1.
WRITE: / 'Background process', lv_job_name , 'called successfully' NO-GAP.
WRITE: / 'You can check the job in transaction SM37'.
Similar Messages
-
Background processing for ABAP report with selection screen
Hi ABAP Gurus,
I m facing a strange problem in scheduling a background job for my report with a selection screen. I have a variant for the report.
I scheduled a job, but it seems to be not doing anything though all the system resources are available. The job overview shows "Acive" for the job. The job is neither stopping anything, it is just sitting there In SM50, the status shows "On Hold".
Any ideas/comments on the problem and how this can be overcome?
Qucik replies and solutions will be highly appreciated as this is a crucial part for a go-live project.
Thanks in advance.
Shivani.Yes. My report has a selection-screen which requires user input. But I have created a variant for the report and trying to run it in background using this variant. But facing this problem.
Strange thing is, instead of the usual SM36/SM37 option where we schedule and monitor background jobs, this option does not work for my report.
But I tried through SE38, and from my selection screen I selected "Schedule background job" and "run immediately" option, and this works. Though I still use SM37 to monitor this background job.
I have never faced such a situation before.
Any hints/tips why this happens and how this can be overcome in the future?
Thanks in advance.
Shivani. -
How to create Background job for Dialog program
Hi Experts,
I have copied Standard tcode to Z-tcode (CS12 tcode).
Now my requirement is to create background job for this program (but program is not a 'E' type its 'I').
How we can schedule Dialog program to Background.
Pls suggest me.
Regards
SKHi do as below :
Reefer below :
Bakcground Job Creation
You will have to submit your report using Submit statement ,
then inside the submitted report write open_job.
Regards,
Uma -
Program works but background job for that program fails....
I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
To realize this I developed a report program which follows following logic.
1) First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
2) Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I converted these PO details to the XML file format that the third party people accept.
In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
3) Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
Now I tried to schedule a batch job for this and the batch job fails with follwing errors
02/25/2009 15:08:47 Error in Control Framework
Message Class = FES
Message Number = 022
Message Type = E
02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE
Message Class = 00
Message Number = 564
Message Type = A
Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
Regards,
JEssica SAmRobert...Thanks for the reply...
I am using follwing code
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = FILEPATH
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Now what changes should i make..where should i store my XML file then instead of my desktop?
and whih Function Module should i Use.. -
Schedule a background job for a program using ABAP code.
Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
*** matnr(20) type c,
*** mbrsh(30) type c,
*** mtart(30) type c,
*** kzsel(20) type c,
*** maktx(40) type c,
*** meins(5) type c,
*** end of itab.
data: begin of record occurs 0,
* data element: MATNR
matnr_001(018),
* data element: MBRSH
mbrsh_002(001),
* data element: MTART
mtart_003(004),
* data element: XFELD
kzsel_01_004(001),
* data element: MAKTX
maktx_005(040),
* data element: MEINS
meins_006(003),
* data element: MTPOS_MARA
mtpos_mara_007(004),
end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\jitu\bdc\10002.txt'
filetype = 'ASC'
has_field_separator = 'x'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
tables
data_tab = record
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-matnr_001.
perform bdc_field using 'RMMG1-MBRSH'
record-mbrsh_002.
perform bdc_field using 'RMMG1-MTART'
record-mtart_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-kzsel_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
record-maktx_005.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-meins_006.
perform bdc_field using 'MARA-MTPOS_MARA'
record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************& -
BackGround Job for Transaction VF06
Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha KapoorHi,
I have the seen the Log it tells:
Date Time Message text Message class Message no. Message type
29.06.2008 22:00:48 Job started 00 516 S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH) 00 550 S
29.06.2008 22:00:48 Job finished 00 517 S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor -
Can ABAP proxy to consume WSDL file be run as background job for every10min
Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1) Should I create a web service or should I consume a web service?
2) If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3) Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
num type i,
end of ty_data.
DATA: itab TYPE standard table of ty_Data,
la_data like line of itab,
xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
<table>
<tt:loop ref=".table">
<item>
<tt:value ref="NUM"/>
</item>
</tt:loop>
</table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel -
Error in Schedule Background Job for Deadline Monitoring of swu3
While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
Please advice what could be cause of itthe earlier problem of background job was solved by changing the output device assigned to user wf-batch .
regarding the transport request :
when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have executed it automatically ...
well thanks all for u r help -
Error in background job for program RSGET_SMSY error message No active job
Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
ThomThank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards -
How to deactivate *Schedule Background Job for Work Items with Errors* SWU3
Hello Guys,
Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
Currently it is green which I don't want. I want to stop this service.
Regards
NKHello,
You could also just stop the job in tx SM37.
But why would you want to do this? As a test?
regards
Rick Bakker
hanabi technology -
Why the background job for downloading file failed?
I have a background job for downloading file with logical path.
with
'OPEN DATASET l_out_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT';
Now, the program can be run in foreground;but when it running on background, it shows 'open file error'.
I do not know what happen?
Please help ~~Hi,
The logical path you have provided might be incorrect or you might not have the necessary authorization to read/write on that folder.
Please check the folder in transaction AL11 & check whether you have the authorization to read/write. BASIS consultant would be able to tell you about it.
Best regards,
Prashant -
BPM - Background Job for Reorganization = Not Scheduled
Good afternoon, first of all thank you very much for the support they can provide. I have developed a JDBC interface -> BPM (Multimapping) which works well. Modify a Message Mapping in the BPM that I use for an RFC Lookup, I have added the Configurable Parameters in the BPM and Integration Directory and everything works fine at design time. But when running the interface at run time the message reaches the BPM and the error "error in BPE inbound Permanent processing".
I have reviewed the Business Process Engine in the RWB and the item is Red Schedule Background Job for Reorganization and detail reads: "Background Job for Reorganization = Not Scheduled".
As I can solve this problem. Thank you very much.Re: Importing trans request failed
Re: Transports Erroring
Re: What is RDDIMPDP .....
have a look it may help you
Message was edited by:
Vinod Udapudi
Message was edited by:
Vinod Udapudi -
Automatic workflow customizing :Schedule background job for condition evalu
Hai,
I have one problem in automatic customizing SWU3(Maintain runtime environment)-Schedule background job for condition evaluation.
How to turn green tick from red cross? All other steps are OK in SWU3 except this problem.
Please give me some tips.
-Jaheer
_______Thanks in terms of BIG points_______________________Hi Jaheer
If the only red cross is next to the condition evaluation job, I suppose you could just schedule up the job automatically in SM36. Just be sure that the RFC Destination is correctly configured.
The program that you need to schedule is <b>RSWWCOND</b>. The SAP default is to call the job SWWCOND and schedule it to run every 30min. That should get rid of the red cross. And if not, you might find along the way why the Auto-Customising didn't work.
Cheers
Lyal -
How to create a background job for call transaction
hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure -
Can we change the selection criteria for RV60SBAT Background Job for Billin
We have a requirement to add a new selection criteria for RV60SBAT Background Job for Billing. We want to process back order invoices first. So we want a specific background job to select these. So we want to select any orders that are eligible to be invoiced where order date < the date of background job(r sy-datum ). Any ideas where we can introduce this logic for selection criteria?
Thanks,
MattHi Matt
For your requirement , copy the standard RV60SBAT program to Z program and in that copied RV60SBAT program , maintain the logic that the backorder invoices should be first processed.Then after that regular background job for billing should take happen .Then your requirement can be fulfilled
Regards
Srinath
Maybe you are looking for
-
Itunes wont download at all!!!!! PLEASE HELP
i just got a new computer and im trying to download itunes but once its done downloading it goes into an error!!!something about compaq_administrator/itunes not valid_win32....please help
-
Hi All, We are using ISR scenarios (Eg: Personal change request of MSS package) where we have used adobe forms. Manager generates a new form whcih goes to HR co-ordinator as a workitem. But we need to save these forms in R/3 also. because in future
-
Modify an user attribute using Powershell script
In the current account creation script I am setting the following two attributes targetAddress and proxyAddressess: $UserAttributes[0].Add('targetAddress', $User.mail) $UserAttributes[0].Add('proxyAddresses', "SMTP:" + $User.mail) I need to be able
-
I checked the system info this morning because I wanted to see if it reported the extra 4GB RAM that I purchased and had them install and saw that it reported my computer as an i5 and not the i7 that I specifically asked to purchase and told that's w
-
Re: tivo VOD not working
I'm having the same issue - has this be resolved for other customers? Anything I can do to get it working again?