Submit button disappears when returning to the quiz slide

Hi everyone,
We just upgraded from Captivate 4.0 to 5.5. I'm learning 5.5 differences from 4.0 and have one that I can't figure out.
On the quiz slides, if the learner moves back and forward within the quiz slides, the quiz buttons are fine. However, if they click Back on the 1st quiz slide, then go forward to the quiz slide the submit button flashes briefly then disappears for that slide and all the other quiz slides. I can't find a setting to fix this.
Any suggestions or thoughts would be appreciated. Thank you.

Sounds like a quiz scope issue.  If you click back on the first quiz slide that would take you to the slide BEFORE the first quiz slide which is technically outside the quiz scope.  This usually results in Captivate locking the quiz.
I haven't personally seen this button disappearing act but you can test whether quiz scope is the likely culprit by adding a scored click box to the first slide of the project, which will then extend the quiz scope out to that slide.  If this prevents your quiz slide buttons from disappearing, we know where the issue comes from.  That may mean you have still found a bug that needs to be fixed though.

Similar Messages

  • Submit button not taking user to the next slide...

    Hi there,
    Hopefully this is a simple one!...
    The submit button in my quiz does not take the user to the next slide, it just seems to lock and you have to click on the forward button at the bottom of the screen. Does anyone know why this is and how to fix it? I cant use a submit all button as that seems to take away the Action section from the master slide.
    Thanks

    Hi there,
    Swift reply as usual!
    I actually solved this one.. I just had to add "go to next slide" in the advanced action!
    I did have to copy and paste all my work into a new project though.. must have had my second bug of the week!
    Thanks anyway

  • The edit button disappears when I have the link window open, so how do I copy and paste address for email link?

    When I want to create a link to a web page in an email, I click the "link" icon and a window appears asking for the address. But simultaneously, the "edit" function and all other functions disappear from the Firefox toolbar. With no edit, how can I copy and paste the address? I have tried highlighting the address and dragging it into the window, but it won't drop into the window.
    I have resorted to copying the address to a document and then pasting it into the link window, but there must be a less cumbersome way.

    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden.<br />
    You can make the Menu bar visible via View > Toolbars, also accessible via Firefox > Options.<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    * View > Toolbars : [X] Menu Bar

  • I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button.  When the butten is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format.  Is there a quick fix?

    I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button.  When the button is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format.  Is there a quick fix?

    Hi,
    You have the choice between xml or pdf, in later versions of designer you can choose with a dropdown on the email button Object palette, the "Submit As";
    In earlier version you had to edit the XML Source and change the format from xml to pdf (or vice-versa);
    Regards
    Bruce

  • Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive.  How do I do this?  I created image

    I am trying to emulate a piece of equipment.  I need the user to be able to click on specific buttons that will take the user to another screen(s).  After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed.  I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button.  How can I get that 3rd state to stay after user returns to the main screen? 

    Hi Elizabeth,
    Since I just did this morning what you are currently attempting to do, I thought I'd share my method.  I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out.  However, I am happy to share here anything I have learned thus far.
    First, here is what my initial slide looks like (see interaction slide below).  I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide.  Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance). 
    The initial slide (interaction slide):
    Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below):  Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed.  The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
    Content Slide 1:
    Remember, there may be an easier way to do this in Captivate.  I am using Cp6 for this module.
    1. I created two user variables as follows
    Name: v_batteryExplore
    Value: 0
    Name: v_fuelExplore
    Value: 0
    2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
    Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
    I have also noticed that it matters where the buttons are located on the timeline.  It seems best to have buttons above all other content.  Not sure why, but I have had images not appear when I have not done this.
    And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
    As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible.  Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name.  In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden.  Here is a final screenshot of my timeline for this interaction.  I hope this information helps you!

  • Next & Submit Buttons disappeared!

    The next & submit buttons disappeared on the last few pages of my form, please help me put them back!
    Perhaps the show/hide selection is off?
    Can that be placed in the save state without a condition, if so, how so, or what will a condition be that keeps it in the show state?

    Here's the Link to our imbedded FORMSCENTRAL form.
    https://www.voyagerautosales.com/financeform.aspx
    Windows Internet Explorer 9 Ver. 9.0.8112.16421
    The problem is that the SUBMIT BUTTON appears too early when the user has not answered all the
    questions in the form.

  • First time going to a site where I do not have access and clicking the back button I'm returned to the root site instead of the site I started from

    Greetings,
    I have SharePoint 2013 enterprise using ADFS for authentication.  I have an issue where the first time going to a site where you do not have access and clicking the back button you're returned to the root site instead of the site you
    started from.
    ie:
    1) at site http://www.sharepoint.com/sites/finance/home.aspx
    2) browse to
    http://www.sharepoint.com/sites/finance/private/home.aspx
    3) receive a message: you do not have access to this site  ((oops went to the wrong location - I'll hit the back button))
    4) click the browser back button
    5) get returned to http://www.sharepoint.com/pages/home.aspx
    This only happens the first time browsing to a site that I do not have rights to, after this I can browse to the same site and hit the browser back  button and return to the correct site, or any other site that I do not have access to.
    Any ideas as to why this happens?  Ideas of where to start looking?
    Thanks

    Hi Robert,
    From your description, when you receive access denied message and hit back button in browser, it redirects you to the root site but not previous site. However, this just happens at the first time.
    You may try to use some tool or check log which can tell us how does it handle the request when you hit the button. And compare the issue time and non-issue time.
    I'd suggest you use Netmon tool:
    http://blogs.msdn.com/b/carloshm/archive/2012/11/08/sharepoint-2013-network-monitor-parsers.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Vertical scroll bar disappears when I minimize the screen

    I have Firefox 10.0.2. I do have a vertical scroll bar with both the up and down button; however, they all disappear when I minimize the screen. When I am in Ancestry, for example, when I minimize I get a horizontal scroll bar but there is no vertical scroll bar. I have no clue what to do. I minimize screens a lot when I am in Ancestry and it gets very frustrating. Can anyone help?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
    If the problem persists, you can also try disabling the '''Plugins''' in Tools > Add-ons temporarily to check.

  • HT203353 Safari extensions disappear when I quit the program?

    Why do Safari extensions disappear when I quit the program? They are all from the Apple extensions pages.  I started manually adding extensions because the Add This bar disappeared when I clicked the extensions off button and I couldn't find it to get it back. I liked Add This because it added an extra bar below the url box with the extensions in color. I tried to add the Pocket extension to Add This with a supposed installer from the web site but it disappeared when I clicked on it and didn't add it. Now when I add extensions from the Apple Safari extensions pages there are just little grey images on buttons beside the url box. I quit Safari at night and the next morning when I start the program the extensions are gone. They were all enabled which appears to be the default. Also want to know if Add This is no longer supported.

    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Use the search box in the toolbar of the Keychain Access window to search for an item named "Safari Extensions List". If found, delete it. Quit Keychain Access.
    Quit and relaunch Safari.

  • Why does added text disappear when I move the cursor

    After adding text to an unprotected .pdf file the text disappears when I move the cursor and want to add a second box of text. The text in the first box reappears when I double click on the space where the box was. How do I set the text so that it remains visible and printable?

    Hi,
    I think the data in the PDF file was filled-in using MAC preview.
    One option is to ask the user to fill the file again using Adobe Reader or Acrobat.
    Or else refer to following link:
    http://acrobatusers.com/actions-exchange/pdf2fdf_auto-save
    Regards,
    Anoop

  • Small black squares appear/disappear when I used the down key

    Small black squares appear/disappear when I used the down key-particulary when on FB, but also at other times

    No, there is no yellow star on any of the entries. Each entry has the site's (or company's) logo, as well as the name of the site and URL. There is nothing more in each entry.

  • ITunes entry disappears when I move the cursor - up to 3 times

    A small but nevertheless annoying problem - very often an entry typed into iTunes e.g. Album or Genre will disappear when I move the cursor. This will happen up to three times in a row. Then the iTunes software accepts the change. Anyone else having this experience? Thanks, Adrian OS 10.7.5 ITunes 11.0.1

    Hello mine also same problem.
    It is irritating a lot form past few days.
    I uninstalled and reinstalled the adobe reader but no use.
    I am using Windows 7 and adobe version 11.0.09
    Kindly help in this regard.

  • Iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

    iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

    Hi Cyclosaurus,
    Thank you for your reply. Sorry to bug you again but can I ask some further questions? Pls excuse my lack of knowledge on these things.
    In relation to your points:
    1) In the ftp publishing settings, public_html is acutal in where it says "site name", where it says "URL" I have http://www.gippmed.com. I was advised to put public_html in "site name" from my hosting. If I put anything else it publishes the entire site to a folder with that name on the server and is not viewable online?
    2) I have removed the spaces in the album page name and will reupload soon. In relation to the image file names, am I correct in saying that iweb is naming them from the captions? Do you really have to use one word captions or use underscores, it looks a little odd? I have read troubleshooting articles about iweb and spaces and it also recommends similar as you are, suggesting that all page names should have underscore instead of spaces. Problem is, if for example I change the page name "About Me" to "About_Me" iweb automatically changes it in the navigation menu and this looks silly to have undescores in the Nav Menu. Is there a way around this?
    Lastly, a new problem that I have never had before:
    Previously, iweb would remember what I had published and only publish new site changes. Now, every time I turn my computer off and on, I open iweb and it doesn't recognise any of the previous publishing, ie it republishes the entire site.
    Thank you again for your help

  • Send e-mail when someone takes the quiz

    I have my quiz set up so results are posted into my internal server so I can use quiz analyzer to access the results. Is there a way I can receive an email when someone takes the quiz so I don't have to check the quiz analyzer to see who took the test ?

    Captivate does allow you to trigger an email via Advanced Actions.  However, this at best will only open a new email in the user's email client with some default Subject text and your email address.  You're still reliant on the user manually sending this email.  This makes it inherently unreliable.
    To achieve an automated email, you would need to have access to web programming skills to create a server-side page that sent an email when called.  The Captivate course participant would then have no awareness of the email.

  • I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

    I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Maybe you are looking for