SUBMIT RBDMON00 (bd87)

SUBMIT for report RBDMON00 (bd87)
SUBMIT... [VIA SELECTION-SCREEN]
it is not setting value for the field Partner system SX_PRPRN
and Message type SX_MESTY.
any idea
plz help
Thanks & reared
Diwakar Chaube
Edited by: diwakar chaube on Sep 26, 2008 9:16 AM
Edited by: diwakar chaube on Sep 26, 2008 9:16 AM
Edited by: diwakar chaube on Sep 26, 2008 9:28 AM

HI,
First run standard report and create a variant.
and this varaint name u specify in variantname here
submit RBDMON00 USING SELECTION-SET 'variantname'
                with SX_PRPRN-LOW eq 'AIN1'
                with SX_MESTY-LOW eq 'ACC_BILLING'
                 VIA SELECTION-SCREEN
                 AND RETURN.
Regards,
Shankar.

Similar Messages

  • Passing data to BD87 screen

    hi,
    i want to pass idoc number to bd87 screen through my program .
    i tried using the submit statement as there is no parameter id for sx_docnu field like this:
    lv_docnum =(having idoc number)
            r_docnum2-sign = 'I'.
            r_docnum2-option = 'EQ'.
            r_docnum2-low = lv_docnum.
            append r_docnum2.
       SUBMIT rbdmon00
      WITH sx_docnu in r_docnum2
      via selection-screen
      AND RETURN.
    but this is not working.can anybody tell me how to do this????

    Hi
    Try this
    DATA: rspar_tab  TYPE TABLE OF rsparams.
    rspar_line-selname = 'SX_DOCNU'.
    rspar_line-kind    = 'S'.
    rspar_line-sign    = 'I'.
    rspar_line-option  = 'EQ'.
    rspar_line-low     = '002'.  "Idoc number
    APPEND rspar_line TO rspar_tab.
    SUBMIT rbdmon00
    WITH selection-table rspar_tab
    via selection-screen
    AND RETURN.
    Cheers
    Joginder

  • Passing data to MIGO screen using BAPI

    Hi Friends
          I have PO header and item details data in Ztables seperately. now I want fetch these data and should display in MIGO transaction screen to do the GR by using BAPI function module.
    Please help me how to solve this problem.
    Thanks & Regards.
    Rajsekhar
    Edited by: Sekhar on Mar 4, 2008 7:16 AM

    Hi
    Try this
    DATA: rspar_tab  TYPE TABLE OF rsparams.
    rspar_line-selname = 'SX_DOCNU'.
    rspar_line-kind    = 'S'.
    rspar_line-sign    = 'I'.
    rspar_line-option  = 'EQ'.
    rspar_line-low     = '002'.  "Idoc number
    APPEND rspar_line TO rspar_tab.
    SUBMIT rbdmon00
    WITH selection-table rspar_tab
    via selection-screen
    AND RETURN.
    Cheers
    Joginder

  • How to Call Report RBDMON00/ Tcode BD87 and copy output in to externel DB

    Hello,
    for a student project y have to to write the output of some ABAP Reports and Function Modulesin an externel Database.
    This time its about the Transaction Code "bd87" programmname "RBDMON00".
    I've tried to write an RFC Function Module which calls the programm with:
    SUBMIT RBDMN00
    EXPORTING LIST TO MEMORY AND RETURN.
    CALL FUNCTION 'LIST_FROM_MEMORY'
    CALL FUNCTION 'LIST_TO_ASCI'
    But theres always an exception Raise in the Function 'LIST_FROM_MEMORY' that theres nothign in the List.
    I don't understand why, with other reports it works great.
    Or is there any other way the get the output from Tcode bd87.
    Is ther any body outher who can help me?
    Thank you very.
    Greets
    JP

    Sorry I'm realy new in SAP and ABAP, can you show me an example how to read out the the Idoc headers out of EDIDC table.
    Or is there any other way to get the entries for example from the table "IDoc entries in tRFC queue" and the other tables behind bd87?
    thanks for your patience.

  • Skip first screen of BD87 using call transaction with BDC_DATA option

    hello all,
    i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
    regards.

    Hi
    Build a BDCDATA with following code..
                                                          T     BD87                                                                               
    RBDMON00     1100     X                                                                               
    BDC_CURSOR     SX_DOCNU-LOW
                                                                BDC_OKCODE     =CRET
                                                                SX_DOCNU-LOW                                                                               
    SX_CRETI-LOW     00:00:00
                                                                SX_CRETI-HIGH     00:00:00
                                                                SX_UPDDA-LOW     05.02.2010
                                                                SX_UPDDA-HIGH     05.02.2010
                                                                SX_UPDTI-LOW     00:00:00
                                                                SX_UPDTI-HIGH     00:00:00
    RBDMON00     0100     X                                                                               
    BDC_OKCODE     =BACK
    RBDMON00     1100     X                                                                               
    BDC_OKCODE     /ECBAC
                                                                BDC_CURSOR     SX_DOCNU-LOW

  • Reprocess the IDOC without using BD87

    Can I  reprocess an idoc through a zreport in the background. can i use the program behind BD87 and use a submit statement?
    But BD87 genertes an output from which you have pick your idoc and reprocess it manually.
    Thanks,
    krishna.

    hi ,
    See the status of the record and process the below program using Submit report by passing Idoc number
    Program RBDMANI2 for status 51 & 52
    Program RBDAPP01 for status 64 ,66
    Program RBDAGAIE for status 32 and 69 (Edited IDocs)
    Program RBDSYNER for status 26
    Program RSEOUT00 for status 30
    re-process IDocs failing in 29 status, use program RBDAGAIN.
    Prabhudas

  • How to automate manual idoc processing in BD87

    I am trying to automate manual processing of iDOCs in BD87. I used the following code to pass idoc-id to global variable 'DCN' and then skip the first screen of BD87 to go to processing directly. After running following code
    SET PARAMETER ID 'DCN' FIELD itabhdr-idoc_id.
    CALL TRANSACTION 'BD87' AND SKIP FIRST SCREEN.
    I get to the first screen because it cannot take my idoc-id to BD87. How I can pass idoc-id to global? I have used the above code to goto VA02 with VBELN and it worked perfectly.

    Hi,
    Try this small BDC program...This worked for me..
    PARAMETERS: p_idoc TYPE edidc-docnum DEFAULT '0000000000519276'.
    DATA: t_bdcdata TYPE STANDARD TABLE OF bdcdata.
    PERFORM bdc_begin USING 'RBDMON00' '1100'.
    PERFORM bdc_valu  USING: 'BDC_CURSOR' 'SX_UPDDA-HIGH',
                             'BDC_OKCODE' '=CRET',
                             'SX_DOCNU-LOW' p_idoc ,
                             'SX_CRETI-LOW' '00:00:00',
                             'SX_CRETI-HIGH' '00:00:00',
                             'SX_UPDDA-LOW' '',
                             'SX_UPDDA-HIGH' ''.
    CALL TRANSACTION 'BD87' USING t_bdcdata MODE 'E'.
    *       FORM bdc_begin                                                *
    *  -->  RV_PROGRAM                                                    *
    *  -->  RV_SCREEN                                                     *
    FORM bdc_begin USING rv_program rv_screen.
      DATA: s_bdcdata TYPE bdcdata.
      s_bdcdata-program = rv_program.
      s_bdcdata-dynpro  = rv_screen.
      s_bdcdata-dynbegin = 'X'.
      APPEND s_bdcdata TO t_bdcdata.
    ENDFORM.
    *       FORM bdc_valu                                                 *
    *  -->  RV_FNAM                                                       *
    *  -->  RV_FVAL                                                       *
    FORM bdc_valu USING rv_fnam rv_fval.
      DATA: s_bdcdata TYPE bdcdata.
      s_bdcdata-fnam = rv_fnam.
      s_bdcdata-fval = rv_fval.
      APPEND s_bdcdata TO t_bdcdata.
    ENDFORM.
    Thanks,
    Naren

  • Idocs diff btwn bd20 & bd87

    hi guys wats the difference btwn, bd20 and bd87 t codes and wat is the purpose they r used in ale-idocs.
       thaks in advance.......

    Hi chaitanya ,
    BD87- (Program-RBDMON00 )It is used to monitor the Status of IDOCs created .Also it can be used to process the IDOC , which are stuck up in the pipeline.
    BD20- (Program-RBDAPP01) It is used to Inbound processing
    (background and foreground ) of IDOCs ready for transfer.
    I hope this solves ur problem.
    Regards
    Note: Reward if it helps

  • Trying to Submit an App to Vendor Portal. Can't get it to work.

    HI,  
    I've spent about 14 hours trying to submit an App to the Vendor portal.   Running FIrefox 3.0.19 on Windows XP, SP3.  Seems the push-buttons and forms just won't work.  I've updated to the latest JRE 6.0.250.10 runtime, and still no luck.
    Several folks reported this issue back in 2011 on other developer forums.  Solution then was to use latest IE9,
    with the upgrade to latest Java Runtime 6.   Is IE9 the only browser Vendor Portal works with?
    FOr example, I can log into the Vendor Portal (ver. 4.0.1.3, i think, as of now, 24Sept2012), and update fields such as address, name, etc.  But if I try to upload a 480x480 logo, it just keeps reporting "Invalid logo file" (or whatever the red error message is).  And, when I press the button to do the "Add Rating" on the app description screen, I get
    all the radio buttons, but when I click submit, the form disappears, (without indicating any update - ie no green
    "G" for General Audience).   Attempts to press "Next" to get to next page, report that "Rating has not been added"
    and must be added.
    SO, I am stymied.  I even tried the browser on the PLaybook, and even it will not allow a 480x480 logo file to be
    uploaded successfully.
    Is the Vendor Portal disabled?  My Firefox+WinXP(sp3) platform is used to connect to numerous secure
    sites, and has all the features enabled to allow secure uploads, and Java/Javascript operation. 
    This is a remarkably difficult process.   Any suggestions?  Is there a Linux flavour combo that might work, or is
    the Vendor Portal not online right now, for app submission?    Thanx for any info...
    - Rus

    More details: Trying to add a logo picture, using Vendor Portal website version 4.0.3.1.   I have confirmed,, using three different graphics packages, that my logo picture is 480x480 pixels.   Latest attempt is using Firefoix 13.0.1, from a MacBook Air!   (Bought in June 2012, latest Firefox.. all new code, latests JRE, etc.  This platform works everywhere folks... )   Attempts to load a logo .jpg file fail, with a message "Please Select valid logo".  
    This is the Vendor Portal for adding Playbook Apps, and managing Vendor accounts.  Pretty important thingy, no?
    Website URL is: https://appworld.blackberry.com/isvportal
    Been trying for two days to add a logo-picture, and the details of a completed app.   Anyone minding the store on this?? Anyone got any suggestions?   If I can determine what the problem is, I will post my solution here.   It occurs to me that this must be possible, somehow, no?
    - Rus

  • How to submit a concurrent request from Discoverer report.

    I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
    This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
    We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
    All help us in this regards are much appreciated.
    Kindly help us in the same!
    Thanks
    Arun

    Thanks Rod for confirming the same.
    I will be trying the same today and will let you know if I succeed in doing it.
    If I can share the actual requirement with you, it goes like this.
    "I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
    The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
    Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
    In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
    Please advice.
    Thanks
    Arun

  • Direct Print smartform to printer via  JOB_OPEN function and using SUBMIT

    Hello,
    I can not able to printout from forms . I can able to get spool number but it is not printing directly to printer (printer Output should come automatic). I am getting error message in SP02 as Status ->Waiting    when i check is showing as "Frontend unavailable".
    please find sample code below to test same:
    REPORT  ZTEST_1                                  .
    constants : wc_x type c value 'X'.
    DATA: wv_val(1) TYPE c,
          wv_pripar TYPE pri_params,
          wv_arcpar TYPE arc_params,
          wv_lay   TYPE pri_params-paart value 'DINA4',
          wv_lines TYPE pri_params-linct,
          wv_rows  TYPE pri_params-linsz.
    data: wv_jobname like tbtcjob-jobname.
    data: wv_jobcount like tbtcjob-jobcount,
          wv_host like msxxlist-host.
    data: begin of ws_starttime.
            include structure tbtcstrt.
    data: end of ws_starttime.
    data: wv_starttimeimmediate like btch0000-char1 value 'X',
          wv_flag(1),
          WV_DO_PRINT type i.
    concatenate sy-tcode+0(4) ' ' 'sample test - print'
    into wv_jobname.
    *Job open
      call function 'JOB_OPEN'
           exporting
                delanfrep        = 'X'
                jobname          = wv_jobname
                sdlstrtdt        = sy-datum
                sdlstrttm        = sy-uzeit
           importing
                jobcount         = wv_jobcount
      if sy-subrc eq 0.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
           EXPORTING
                in_archive_parameters  = wv_arcpar
                in_parameters          = wv_pripar
                LIST_NAME           = 'JOB NAME'
                LIST_TEXT             = 'test_text'
                RECEIVER             = sy-uname
                IMMEDIATELY           = wc_x
                RELEASE               = wc_x
                USER                 = sy-uname
                layout                 = wv_lay
                no_dialog              = wc_x
           IMPORTING
                out_archive_parameters = wv_arcpar
                out_parameters         = wv_pripar
                valid                  = wv_val
    break-point.
    wv_pripar-PRSAP = space.
    wv_pripar-PRIOT = 1.
    wv_pripar-prrec = sy-uname.
    if not wv_val is initial.
    *call external program and pass data
    submit SF_EXAMPLE_01
          USER sy-uname
         via job wv_jobname
         number wv_jobcount
      TO SAP-SPOOL
    SPOOL PARAMETERS wv_pripar
    ARCHIVE PARAMETERS wv_arcpar
    WITHOUT SPOOL DYNPRO
    AND RETURN.
    endif.
    *Close job
      ws_starttime-sdlstrtdt = sy-datum .
      ws_starttime-sdlstrttm = sy-UZEIT.
        ws_starttime-IMSTRTPOS = WC_X .
      call function 'JOB_CLOSE'
           exporting
                event_id             = ws_starttime-eventid
                event_param          = ws_starttime-eventparm
                EVENT_PERIODIC       = space
                jobcount             = wv_jobcount
                jobname              = wv_jobname
                laststrtdt           = ws_starttime-laststrtdt
                laststrttm           = ws_starttime-laststrttm
                prddays              = 0                       "set to 0 not repeat
                prdhours             = 0
                prdmins              = 0
                prdmonths            = 0
                prdweeks             = 0
                sdlstrtdt            = ws_starttime-sdlstrtdt
                sdlstrttm            = ws_starttime-sdlstrttm
                strtimmed            = wv_starttimeimmediate
      endif.

    Hi,
    As far as printing to devices not all devices support Bluetooth. Many devices support Bonjour protocal, IPP. The main print port is 9100. Additionally you can see what IO protocols are supported on a product by looking at the EWS (Embedded WebServer) there should be a networking page with that information.  Port 9100 is your basic print port and different devices will support different formats (PDF, JPEG, PCL5, PCL6). If there is an API you can find (i am not familiar with J2ME availible calls, then you can use those and send the data to port 9100. Again that is the basic path most printers will accept. not all devices support bonjour not all device support bluetooth etc... Hope that helps and good luck.
    I am an HP Employee.

  • Open BI Publisher Report After Submit

    I have a page with 2 date fields, which are parameters for a report.
    I also have a button called RUN_REPORT.
    What I need to do is that the user puts the parameters in, then clicks RUN_REPORT. The page should submit (putting parameters into session state) and then a BI Publisher report should appear in a pop up page.
    At the moment using the code below, the user inputs parameters and clicks RUN-REPORT (SUBMIT). Unfortunatley the BI report tries to open before the submit is finished. So there are no items in session state for the report to use as parameters.
    Page HTML Header
    <script type="text/javascript">
    function renew()
    doSubmit('SUBMIT')
    popupURL('This contains my string to open the report')
    </script>On my button
    javascript:renew();Help appreciated
    Gus

    I've solved this in two ways:
    First solution:
    - The last parameter the user has to pick is in a selectlist which submits the page
    - The button redirects to url:
    javascript:popUpNamed('URL','');Seccond solution (and user-friendlier solution ;) ):
    1 - Hidden item (say P_RAP), default it's empty
    2 - The buttons Action is 'Submit page'
    3 - A conditional Branche to the own page, which only runs when the report button is pressed.
    3a -- This branche sets the hidden Item (P_RAP) with the report name (in my case, becouse I can start multiple reports on the page and I use it in my URL to the report, it can also be just a 1 or something, just that it is filled)
    4 - A Page Process which runs On Load - After Header, and is conditional: Value of Item P_RAP is NOT NULL.
    4a -- The code of this process is:
    BEGIN
    htp.p('<script type="text/javascript">');
    htp.p('w = open("URL_to_the_report","_blank","Scrollbars=0,location=0,resizable=1,menubar=0,toolbar=0,left=50,top=100,width=500,height=500");');
    htp.p('</script>');
    :P_RAP:=''; /*clear the P_RAP item after starting the report*/
    END;Hope this helps

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Welcome to the Apple community.
    Does anyone have suggestions?
    Trash the spyware (Chrome) and use Safari.

  • My browsers keep freezing up until I have to forcequit. Firefox freezes at start-up and safari works for a bit but usually freezes when opening tabs. When I try to submit a crash report in either case, it always tells me "submission failed".

    This started yesterday night. I tried to restore firefox to yesterday morning's time machine version, but no dice. No idea what's causing it, I haven't installed anything.
    The refusing to submit my crash reports really confuses. I don't know if it's applicable to everything or just browsers - browsers are the only thing that have crashed.
    Thanks for the help!

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

Maybe you are looking for