Submited Jobs not showing up in Batch monitor

I just got done with a reinstall of compressor and Qmaster with some positive results. I can now start a quickcluster just fine, and have it show up in compressor and submit to it. When i click the submit button, The batch doesn't show up in batch monitor. Even when i try submitting it "My Computer" it still fails to show up in batch monitor.
Anyone have any ideas?

Batch monitor was set to list completed jobs. I'm an idiot.

Similar Messages

Droplet jobs submitted not showing up in Batch Monitor

I am compressing MP4 files in large batches of 100-150 files at a time by dragging them over a droplet. I can submit about 4-6 batches in a row, but after that Batch Monitor does not appear to accept anymore batches.
I can continue dragging files over my droplet and submit the batch. The process completes as if the batch was submitted successfully, but it never shows up in batch monitor and the output files are never created. Any ideas?
I have three, dual-quad Intel machines with 8 GB of RAM in their own private cluster processing my jobs.

Setting found to increase number of jobs.

Submitted tasks not appearing in the batch monitor

In other words Compressor seems to be totally useless after the update.
I select my preset, and the destination, I click submit, I get the little popup with the name, cluster and priority options, I click submit, and then nothing happens. Nothing at all. Nothing appears in the batch monitor, just nothing.
A little "last submitted at.." appears at the bottom of the upper window, but that's it.
Can anyone please help? Compressor was working so well before the update...

OK, now I've noticed something else. When I submit, the batch instantly fails.
If I open the batch monitor I can click on the failed files, revealing this fault: 3x INVOKING METHOD OR ACCESSING MEMBER FOR NULL REFERENCE

Compressor 4 files not showing up in Batch Monitor

Appartenly Batch monitor doesn't work with compressor 4. Using a droplet and I can't monitor the progress. Any thoughts?

Batch Monitor got replaced by "Share Monitor".
Two ways to start monitoring:
1. check the "Automatically launch Share Monitor" in Compressor 4's Preferences
2. Nagiate intoi the Compressor 4 Package and there to /Contents/PlugIns/Compressor/CompressorKit.bundle/Contents/EmbeddedApps and start Share Monitor from there
Either way I recommend to stick it to the Dock once you've opened Share Monitor successfully.

Clips not showing up on NTSC monitor when editing

I have a Sony DSR-11 and Sony NTSC monitor connected to my computer.The clips are not showing up on the monitor when I am editing. They show up when I am in Log and Capture. Is there anything I can do to get this to work again?
Thanks

Start with the basics.
View> video playback > apple firewire ntsc (or pal if you swing that way)
View> external video > all frames
View> external audio > audio follows video
View> refresh all devices
x

My computer is not showing up in share monitor

Hi
I was happily creating and sharing files to Vimeo from Final Cut Pro x - When I had a kernal panic - Hard reset and now "My Computer" does not show up in share monitor - It says no clusters found - When I goto share a file to vimeo now nothing happens ..
Any clues - I am going mad....

There is nothing to fix, it is not supposed to show up there. It will only show there as a 'camera' if there are photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc which you might want to then copy to your comptuer.
What do you want to do with the iPad via My Computer ?

:: NWA does not show table view for monitoring reports ::

Hi,
We are facing an issue in one of our portal system.
I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
Here I get the resource utilization graphs.
The graphs show proper values however when I click on table view it does not show any value or table at all.
Then I click on Settings button, and click on Persistent radio button.
It asks to enter the number of days for which the the data should be stored.
I gave it as 2 days and click on Apply button.
It shows a message saying "changes would be effective after restarting monitoring service".
However when I go there i.e. NWA --> Administration --> Applications
I get below services
cafruntimemonitoring~ear
com.sap.ip.bi.sdk.monitoring
tclmwebadminmonitoravail~wd
tclmwebadminmonitorcomplib~wd
tclmwebadminmonitorprovider_ear
tclmwebadminmonitorstate~wd
tclmwebadminoverviewmonitoring~wd
tcmonitoringsysteminfo
Would you kindly suggest which service from above list should be restarted ?
Thank you, Regards,
Girish Garje.

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

BI Publisher "Report Job" not showing job continously searching

Hi Experts,
I'm facing problem while schedule job in Oracle BI Publisher, I successfully schedule job (for bursting) and its running 3 or 4 days continuously, as a result got the report by email but after that I don't get any email, even no error message by email as well. when I go to "Report Job" it showing no data and continuously searching, showing "Fetching Jobs Data....." right top of the page
Administration>Scheduler Configuration
Scheduler = Quartz
Administration>Scheduler Diagnostics
Result = Passed
Oracle BI Publisher 11.1.1.6.0

Ok, you cannot see report scheduler information, report history if scheduler is down or hung.
1. How many reports are simultaneously scheduled to run?
2. How do you rate the size of the scheduled reports? Based on number of rows it generates - Small? Medium? or Large?
Looks like BI Publisher is not able to push jobs into the scheduler queue.
Please check BIP scheduler database table "QRTZ_FIRED_TRIGGERS" to see any running or pending jobs.
You will come to the root cause of the issue by setting the BIP log level to trace:32
http://docs.oracle.com/cd/E28280_01/bi.1111/e22255/diagnostics.htm#BIPAD343
or configure xdodebug
https://blogs.oracle.com/xmlpublisher/entry/get_logging
Take next action steps based on the error/warning that will be captured in the log files during the time of scheduling
You can also consider the following but I would prefer to check the log files first
Please try this at your BIP server side
1. Increase Java Heapsize if it is less
2. Increase BIP Scheduler Database size
3. Clear server cache and scheduler database transaction logs

Schduling background jobs not showing in sm37

Hi,
I scheduled the jobs : Z_MM_INVENTORY_REPORT, RM07MLBS on daily basis from 03/22/2011.Its running successfully upto 03/26/2011 daily,after that when iam checking on SM37 from 03/27/2011 to 03/31/2011 it showing schduled on 03/27/2011 not running. and remaining dates 28,29,30,31 not showing any thing(means not scheduling).
what could may be the reason for not running that jobs.
Thanku

What is the status of the Job in SM37 ?
and on
and remaining dates 28,29,30,31 not showing any thing(means not scheduling).
The periodical jobs create the next job, when the current job changes is status from Released to Active. Since your Job on 27th is having some issue, the Job for 28th has not been created, simillarly the rest.
Regards,
Sanujit

RED footage not showing up on external monitor (CS6)

Hello all,
When I select a RED clip (R3D) and place it in the source window to play it back. It does not show up on my external monitor. (via Blackmagic Intensity Pro).
However, it shows up once placed in the timeline.
This is a problem because when attempting to play footage back for my client, they can not see the image.
Thanks!
- Ryan

I have cs6 but dont have BM card and dont do what youre doing on set etc... but have worked on sets a lot and if youre trying to show producer, director, client ...stuff.... fast.... the best thing is just to do what works fastest... IMO you should just dump your clips into a sequence ( call it previews or something )... timeline and play the stuff so the program monitor is getting the and in turn going to your external monitor.. You can also ( at that point.. on timeline ) decide what to do with fast color correction type stuff ( looks etc ).... so they see something at least close to what they wanna see....
The source monitor has traditionally been a way to set in out points to sorta do a quick edit of what you wanna use... and drop that into timeline from there...it was never intended to be a program monitor...and thats what BM is also dealing with.
good luck..

Podcast submitted but not showing up in iTunes

I submitted my podcast to iTunes two weeks ago. When I try to resbumit to iTunes, it says that the feed has already been submitted. But the podcast does not show up in iTunes when I search for it.
http://feeds.feedburner.com/IBozo
Any ideas?
Thanks,
Brian

They probably just haven't got round to assessing it yet: I can't give you a hard and fast answer about how long it takes but 2-3 weeks seems perfectly possible. When it's been accepted you will get an email including a URL for the Store page.
Note by the way that the episode 'Drunken Sailors' has two 'enclosure' tags, both containing 'drunkensailor.mp3' but one from www.quass.com and one from Feedproxy. Only the first one will show in iTunes: multiple enclosure tags within one 'item' are not recognized. Otherwise the feed is apparently OK and can be subscribed to manually in iTunes (from the 'Advanced' menu).

Going to Compressor from FCEHD - file won't show up in Batch Monitor

Hello all: I am trying to export to Compressor from FCEHD, I am using compressor that came with DVD Studio Pro 2. On my iMac G5 flat panel it will not work because of the PCI card, so I found a work around on the discussion boards and it said to hit escape and go into compressor since I needed an AGP card.
Well I do that but the file is not in the compressor. The Batch Monitor is empty. How do I get the file into the batch monitor? What kind of file goes to the compressor normally? Is it just an FCE file? I have a lab full of computers doing the same thing.
I hope there is a fix, thanks for your time.

Hi:
I don't have FCE but most probably this FCP workflow works:
You can export your timeline as QuickTime Movie, current settings (self contained if you have disk space!) and drag and drop that movi into Compressor.
Hope it helps!
Alberto

Device NOT showing up on my monitor when plugged in?

Iphone plugged in.
Device not showing up? Any ideas?

You're welcome.
This link applies to a Mac.
http://support.apple.com/kb/ts1591

Background job not showing full output of Report

Dear Experts
we have created zpgm for stad report and try to take output as mail to particular user for future analysis bcaz stad gives only 2 days report only we need keep report for months together so when we run job in foreground it shows proper output but when same thing when we run from background it shows only some part of report in mail (we are unable to get full output through background job )
we send mail through spool receipts we have created folder and maintain user for getting mails through so15 distribution list
we need some input to come out of this major issue
if there is any other workaround let me know
Regards

Hello,
If a job is defined by transaction SM36, the print format parameters will only be taken into account, if they are saved as user specific print parameters of the batch user. If no user specific print format
is defined, the ALV standard logic will be processed adjusting the print format to the actual line size of the report.
For example, the list line size is about 132 characters, the widest available format of the chosen printer will be selected X_65_132.
The problem would be solved by defining a device type which is no format assigned to print, or by defining user specific print format parameters for the batch user, who creates the jobs in SM36 (see
SAP note 1179399, item 6).
Regards,
David

Color Corrector's Frame Viewer Split Not Showing Up On External Monitor

Kind've a long title - sorry - but . . . here's my question:
Why am I not able to see the Frame Viewer's split on my external monitor?
A further, more detailed explanation of the problem:
I recently purchased Ripple Training's Color Correction with Andrew Balis. It's very, very imformative and I think will help a lot when it comes time to begin color correcting the feature I'm working on. The section I'm on shows the Frame Viewer tab in the Tool Bench window that presents itself when one opens Color Correction under the Arrange area. In other words, Arrange>Color Correction sets up your windows for color correcting with your Viewer, Canvas, and Tool Bench windows aligned from left to right. When one opens up the 3 Way Color Corrector on a clip and makes a change in the clip, the Frame Viewer tab in the Tool Bench window will show a split screen where on one side you'll have your clip with the color correction you just did, and the other side un-color corrected. Isn't this (split) image supposed to show up in your external monitor just as the images in the Canvas and the Viewer?
That doesn't seem to be happening on my external monitor.
I'm not sure if this problem/issue I'm having is related to the muticlipl issue I posted in an earlier thread http://discussions.apple.com/thread.jspa?threadID=1330596&tstart=0
perhaps.
Any help on this issue would be greatly appreciated.
Thanks in advance,
Javier Calderon

Ahhh, Shane. So it's as simple as that? So then there's nothing wrong with my setup or my external monitor? FCP's just not designed to show the Tool Bench's Frame Viewer image in your external monitor? Wow . . . Well that answers that then I guess. And you're right . . . that IS indeed kind've lame . . .
Thanks.
Javier
. . . um . . . doesn't that kind've defeat the purpose of proper color correction then (regarding the Tool Bench's Frame Viewer anyway)? If the only place you can see your color corrected Frame Viewer split images is on a monitor that's NOT suited for color correction? Anyway . . . just a thought . . .

Submited Jobs not showing up in Batch monitor

Similar Messages

Maybe you are looking for