Submitting Adobe Form by E-Mail

Hope someone can help me
I have an entry form for an event created in Word and converted into an fillable Adobe Form, all of which works OK. I now want to add an option to submit by email before I add the form to the webpage.
I have done this previously and it worked OK, and there was an option to Submit Form next to the option to Highlight Existing Fields (in the purple toolbar). When this was clicked, it opened up a Send Form window where you could enter your email address & full name. This was perfect, and what I want again......
The problem is I cant figure out how to do this. The only thing I can find online is how to add a submit button, but when I do this it asks you to select if its a web email or outlook, and then asks you to save the form.
Can anyone help please? Ive tried searching online to find a solution to no avail
Thanks
Neil

Add a button and attach a "Submit form" action to its Mouse Up event. You yourself don't need to have an email address set up in order to do that.
As the target URL enter this code (replace the dummy address with your own, of course):
mailto:[email protected]

Similar Messages

IE error while submitting Adobe Form

Hi All,
I am facing an unusual problem while submitting Adobe form. When I try to submit Adobe form a dialog box will appear, which shows some missing dll information.
"sapadobecontrol.dll" and force me to close that dialog box which ultimately leads to closing the application.
Till now I have done several things like
1. Repair/upgrade the IE.
2. Modify/ repair Adobe Life Cycle Designer.
I am using Portal Sneak Preview 7.0
Please give your valuable views.
Regards,

I too am having the same issue. My process is also very simple, and I can't seem to find where I could have made a mistake.
I googled the error and found only one or two possible solutions that involved changing my data source. I don't think that is exactly the solution to either of our problems. It seems a bit complex for such simple workflows.

How to send adobe form output in mail as a attachment

i am get the adobe form output
how to attach in a mail ....
Regards
Anbu B

my program is like this.............
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name                     = 'YHRIN_WELCOME'
   IMPORTING
     e_funcname                 = lv_funcname
gs_output-nodialog = 'X'.
gs_output-preview = 'X'.
gs_output-getpdl = 'X'.
   gs_output-getpdf = 'X'.
   gs_output-dest = 'LP01'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams       = gs_output
EXCEPTIONS
    CANCEL                = 1
    USAGE_ERROR           = 2
    SYSTEM_ERROR          = 3
    INTERNAL_ERROR        = 4
    OTHERS                = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA : gs_outputpara TYPE sfpdocparams.
DATA : ls_return TYPE fpformoutput .
gs_outputpara-langu = 'E'.
gs_outputpara-country = 'IN'.
CALL FUNCTION lv_funcname
EXPORTING
    /1bcdwb/docparams = gs_outputpara
    wa_data = wa_mail
    IMPORTING
      /1bcdwb/formoutput = ls_return
    EXCEPTIONS
      OTHERS = 1.
DATA lv_output TYPE sdokcntbins WITH HEADER LINE.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = ls_return-pdf            "PDF file from function module
TABLES
binary_tab = lv_output .
*DATA : result TYPE sfpjoboutput WITH HEADER LINE .
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
    e_result = result
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA : iv_len_in LIKE sood-objlen,
       it_tline TYPE TABLE OF tline WITH HEADER LINE.
PERFORM pdf_file.
DATA:   lt_imessage TYPE STANDARD TABLE OF solisti1 WITH HEADER LINE,
        lt_iattach TYPE STANDARD TABLE OF solisti1 WITH HEADER LINE,
        lt_ipacking_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        lt_ireceivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        lt_iattachment LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA : lt_record LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA : it_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: lv_email   TYPE somlreci1-receiver
                      VALUE 'anbu.'.
PERFORM build_xls_data .
APPEND lt_iattach.
Populate message body text
CLEAR lt_imessage.   REFRESH lt_imessage.
lt_imessage = 'Please find attached PDF file'.
APPEND lt_imessage.
Send file by email as .xls speadsheet
PERFORM send_email_with_xls TABLES lt_imessage
                                      lt_iattach
                                USING lv_email
                                      'PDF Attachment of an Employee'
                                      'PDF'
                                      'TestFileName'
                                      'Employee Detail'.
     Form BUILD_XLS_DATA
FORM build_xls_data .
DATA :lv_buffer TYPE string.
Convert PDF from 132 to 255.
LOOP AT it_tline.
Replacing space by ~
    TRANSLATE it_tline USING ' ~'.
    CONCATENATE lv_buffer it_tline INTO lv_buffer.
ENDLOOP.
   replacing ~ by space
TRANSLATE lv_buffer USING '~'.
DO.
    lt_record = lv_buffer.
Appending 255 characters as a record
    APPEND lt_record.
    SHIFT lv_buffer LEFT BY 255 PLACES.
    IF lv_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
lt_iattach[] = lt_record[].
ENDFORM.
     Form SEND_EMAIL_WITH_XLS
FORM send_email_with_xls TABLES pit_message
                                          pit_attach
                                    USING p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription.
DATA: es_xdocdata LIKE sodocchgi1,
        lv_xcnt TYPE i.
Fill the document data.
es_xdocdata-doc_size = 1.
Populate the subject/generic message attributes
es_xdocdata-obj_langu = sy-langu .
es_xdocdata-obj_name = 'SAPRPT' .
es_xdocdata-obj_descr = p_mtitle .
Fill the document data and get size of attachment
CLEAR es_xdocdata.
READ TABLE lt_iattach INDEX lv_xcnt.
es_xdocdata-doc_size =
     ( lv_xcnt - 1 ) * 255 + STRLEN( lt_iattach ).
es_xdocdata-obj_langu = sy-langu.
es_xdocdata-obj_name   = 'SAPRPT'.
es_xdocdata-obj_descr = p_mtitle.
CLEAR lt_iattachment. REFRESH lt_iattachment.
lt_iattachment[] = pit_attach[].
Describe the body of the message
CLEAR lt_ipacking_list. REFRESH lt_ipacking_list.
lt_ipacking_list-transf_bin = space.
lt_ipacking_list-head_start = 1.
lt_ipacking_list-head_num = 0.
lt_ipacking_list-body_start = 1.
DESCRIBE TABLE lt_imessage LINES lt_ipacking_list-body_num.
lt_ipacking_list-doc_type = 'RAW'.
APPEND lt_ipacking_list.
Create attachment notification
lt_ipacking_list-transf_bin = 'X'.
lt_ipacking_list-head_start = 1.
lt_ipacking_list-head_num   = 1.
lt_ipacking_list-body_start = 1.
DESCRIBE TABLE lt_iattachment LINES lt_ipacking_list-body_num.
lt_ipacking_list-doc_type   = p_format.
lt_ipacking_list-obj_descr = p_attdescription.
lt_ipacking_list-obj_name   = p_filename.
lt_ipacking_list-doc_size   = lt_ipacking_list-body_num * 255.
APPEND lt_ipacking_list.
Add the recipients email address
CLEAR lt_ireceivers. REFRESH lt_ireceivers.
lt_ireceivers-receiver = p_email.
lt_ireceivers-rec_type = 'U'.
lt_ireceivers-com_type = 'INT'.
lt_ireceivers-notif_del = 'X'.
lt_ireceivers-notif_ndel = 'X'.
   APPEND lt_ireceivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = es_xdocdata
            put_in_outbox              = 'X'
            commit_work                = 'X'
       TABLES
            packing_list               = lt_ipacking_list
           contents_bin               = lt_iattachment
             CONTENTS_HEX              = lv_output
            contents_txt               = lt_imessage
            receivers                  = lt_ireceivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
      SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = '' AND RETURN.
ENDFORM.

PDF Attachment problem in Adobe form and send mail is not working

Dear Experts,
                     Recently i'm facing a problem regarding Adobe form PDF attachment and sending an e-mail along with the PDF attachment to customer mail id.But when i execute the RFC Function module, in customer side no mail is comming. And when i check the transaction SBWP then i found that the PDF attachment hold only 1KB of data which is not right.For that i'm sending my code which i was declared in my program.Can anybody please help me to overcome this problem?
Warm Regards,
sameek.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
data: t_att_content_hex type SOLIX_TAB.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
DATA: lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
        l_send type ADR6-SMTP_ADDR value 'Already provided an e-mail address here'.
DATA: lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
Message body and subject*
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Customer Information Form').
TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'Customer Information Form'
I_ATTACHMENT_SIZE =*
I_ATTACHMENT_LANGUAGE = SPACE*
I_ATT_CONTENT_TEXT =*
I_ATTACHMENT_HEADER =*
      i_att_content_hex = t_att_content_hex ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment*
Pass the document to send request*
lo_send_request->set_document( lo_document ).
Create sender*
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).*
Set sender*
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient*
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).*
Set recipient*
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(*
EXPORTING*
i_recipient = lo_recipient*
i_express = 'X' ).*
Send email*
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'The Customer Information form has been emailed to the Employee' type 'I'.

I am also facing issue with email send .
apex 4.1.1 oracle 11g
create or replace procedure email ( p_email in    varchar2)
is
    l_workspace_id      number;
    l_subject           varchar2(2000);
    l_body              clob;
    l_body_html         clob;
     l_email varchar2(40);
begin
    l_workspace_id := apex_util.find_security_group_id (p_workspace => 'xyz');
    apex_util.set_security_group_id (p_security_group_id => l_workspace_id);
l_email:= p_email;
    l_body := ' ';
    l_subject := 'You have new tasks';
    --if l_email=:P3_CONFIRM_EMAIL_ADDRESS is not null then
   -- email( l_email =>:P3_CONFIRM_EMAIL );
-- end if;
        l_body_html := '<p />The following tasks have been added.';
     apex_mail.send (
            p_to        => l_email ,
            p_from      => '[email protected]',
            p_body      => l_body,
            p_body_html => l_body_html,
            p_subj      => l_subject );
APEX_MAIL.PUSH_QUEUE;
end; I also check the log and queue but both are empty,
select * from
apex_mail_queue
select * from
apex_mail_log Kindly suggest what to do ?
I also created a process in apex , which call this procedure and pass the email address entered by user.

Sending Adobe form in perzonalized mail forms

Hi
I created a personalized mail form and I want to send the Adobe PDF form of the contract to the customer along with the personalized mail forms.
I know how to send a personalized mail form, but not sure how do we attach the generate the PDF and attach it to mail form through actions.
Regards,
Deepthi.

Hi Bhargavi,
In your action method first get the FM name for your Adobe form using
fp_function_module_name.
Then you need to call Adobe form FM.Importing lv_formoutput.
Then you need to call bcs interface. sample logic
lcl_send_request - cl_bcs=>create_persistent( ).
lv_pdfsize = zstrlen( lv_formoutput-pdf ).
lt_pdfcontent = cl_document_bcs=>xstring_to_solix( ip_xstring = lv_formoutput-pdf ).
append the mail body to lt_text.
append mail subject to ls_subject.
then
lcl_document = cl_document_bcs=>create_document( i_type = 'RAW'
                                                                                        i_text = lt_text
                                                                                         i_length = '25'
                                                                                         i_subject = ls_subject ).
atach pdf to mail using
call method lcl_document->add_attachment
     exporting
     i_attachment_type = 'PDF'
     i_attachment_subject = ls_mail_sub
     i_attachment_size = lv_pdf_size
     i_att_content_hex = lt_pdf_content.
lcl_send_request->set_documnt( lcl_document ).
lcl_receipient = cl_cam_address_bcs=>create_internet_address( i_address_string = email id ).
lcl_send_request->add_recipient( i_recipient = lcl_recipient ).
lcl_sender = cl_cam_address_bcs=>create_internet_address( i_address_string = sender email id ).
lcl_send_request->set_sender( i_sender = lcl_sender ).
lv_sent_to_all = lcl_send_request->send( i_with_error_screen = 'x' ).
commit work.
Regards,
Tejaswini P.

After submitting adobe forms, nothing happens

Hi Guys,
Our scenario is, from R/3 Enterprise we are RFCing to NW04s based adobe system. The form gets displayed in R/3 and then after keyin the input, it submitted. At this moment, nothing is happening, I wonder if the relevant event is getting triggered. However i have no way to validate this, we have run http trace,smicm trace and system trace in SAP however after sumission nothing happens and we get a message stating "page cannot be displayed". How i can validate whether after submission any event is getting triggered. We are using 3rd party Adobe forms.
Regards
Kalyan

Hello,
there are things that must be clarified:
- RFCing to NW04s based adobe system --->>> I am not aware of any adobe based netweaver, do you mean ADS installed on that system?
- The form gets displayed in R/3 and then after keyin the input, it submitted. --->>> why is the form displayed? from where you get the form? what happens next? what is the submission process? send form from one system to another... and what is the handler program/ job/ anything in the reciever system?
- We are using 3rd party Adobe forms. --->>> What does that mean? Not a SAP integration, no ADS etc.?
Please clarify and we can dscuss that further,
regards Otto

Trouble submitting PDF form with Web Mail

Hello,
I have a fillable PDF form that I'm trying to submit. When I submit the form through an email client (Outlook, Mail, etc.) it works perfectly. When I try to submit using the Webmail option, I get this message: "An unknown error has occurred while uploading the attachment. If you are not sure how to proceed further, you can save your form and return it manually using your Internet mail service."
I've checked the file thoroughly and everything looks correct. I'm perplexed as to why it submits just fine through an email client, but won't submit via Webmail. I've tried on a Mac and a PC and I've tried using a Yahoo account and a Gmail account with the same results. Any ideas?
Thanks!
Kate

I'm using Acrobat XI Pro. I don't have Reader installed on my laptop. The form is for a client who sends it out to patients to fill out, so I need it work with both mail clients and web mail. Is there a way to do that? I don't think changing that preference in my Acrobat will solve the problem, as that will just effect my Acrobat. Is there a setting I can apply to the actual document? Thank you for your response!

Error while opening the ADOBE FORM via mail

Hi to all,
I have created a program to attached ADOBE FORM to mail.
When I execute the program, it sends ADOBE FORM to my mail ID successfully.
But when I open my mail and try to open attached ADOBE FORM, it gives error
ADOBE READER COULD NOT OPEN u2018PDF FORM (1). PDFu2019 because it is either not a supported file type or because the file has been damaged ( for example, it was sent as an email attached and wasnu2019t correctly decoded).
Please can any tell me, what the problem is and what the solution is for that?
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Aug 1, 2011 2:22 PM

Thanks for reply,
below is the code.
data:
l_fm_name         TYPE rs38l_fnam,
   l_formname   TYPE fpname VALUE 'ZTESTF1' ,
fp_docparams      TYPE sfpdocparams,
FP_FORMOUTPUT     TYPE FPFORMOUTPUT,
fp_outputparams   TYPE sfpoutputparams.
data: I_ATT_CONTENT_HEX type SOLIX_TAB.
START-OF-SELECTION.
data: st TYPE ZTABFM11.
data: it type table of sflight.
data: wa like LINE OF it.
data: wa_st like LINE OF ST.
fp_docparams-langu   =      'E'.
fp_docparams-country =      'US'.
fp_docparams-fillable =      'X'.
fp_outputparams-nodialog = 'X'.
fp_outputparams-preview =   'X'.
fp_outputparams-device   = 'LP01'.
fp_outputparams-getpdf =   'X' .
fp_outputparams-dest   =    'LP01'.
fp_outputparams-reqimm =   'X'.
fp_outputparams-reqdel =   'X' .
fp_outputparams-xfpoutdev = 'LP01'.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = l_formname
    IMPORTING
      e_funcname = l_fm_name.
E_INTERFACE_TYPE           =
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
select * from sflight into TABLE it.
loop at it into wa.
    wa_st-CARRID = wa-CARRID.
    wa_st-CONNID = wa-CONNID.
    wa_st-FLDATE = wa-FLDATE .
    wa_st-PLANETYPE   = wa-PLANETYPE.
    append wa_st to st.
    endloop.
CALL FUNCTION l_fm_name
    EXPORTING
      /1bcdwb/docparams = fp_docparams
          st               = st
    IMPORTING
      /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4
   CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
    E_RESULT             = result
   EXCEPTIONS
     usage_error          = 1
     system_error         = 2
     internal_error       = 3
     OTHERS               = 4
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = FP_FORMOUTPUT-PDF
APPEND_TO_TABLE       = ' '
IMPORTING
OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = I_ATT_CONTENT_HEX .
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Fill the details.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'flight details' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'flight details'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
      I_ATT_CONTENT_HEX = I_ATT_CONTENT_HEX ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document ).
Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value 'mail id '.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'Form sucessfuly send to person' type 'I'.
plesase can any one, provide the soultion.
i shall be thankful toy you for this.
regards
pavneet rana

Submitting a form with customize subject line

Hi
I would like some help with Submitting a form via E-mail with a customize subject line. I want the subject like to be the First name of the person which they would have to enter in the form. Is this possible?
Thanks

Look at this previous thread:
http://forums.adobe.com/message/5615207#5615207
The script would look something like:
    //Place into a submit button
     var cSubLine = this.getField("FirstName").value;       //Replace FirstName with the name of the field on your form
     this.mailForm({
     bUI: true,
     cTo: "[email protected]",
     cSubject: cSubLine,

Using Interactive Adobe Forms in LEAD processing(SAP CRM 7.0)

Hi,
I am new to Adobe forms. I want to create it for lead. After creation of lead adobe form should get mailed to required partner automaticaly. This partner will fill the data and send back to update the system.
Please suugest me any documentation to achieve this.
Regards,
Nikhil

Dear Nitin,
The first I am not sure, so hopefully someone else can help you with that.
For the second, If you want a Z-field to be used in the action conditions, you should add an attribute to your BOR-object in SWO1.
How to do this can be found here.
[http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html|http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html]
Hope it helps...
Regards,
Pieter Rijlaarsdam

BPM Process with offline adobe forms - NW CE 7.2 SP3

Hi experts, I have to develop the following scenario and I still don´t know the correct way that I should follow, I have already created the Process Development DC, the XSD and the XDP files, I have also put the XSD and XDP files into portal drive.
Scenario:
1 - This scenario should be started by a webservice that will be created too, this webservice have to receive data that will be used in the whole process.
2 - Call some RFCs on ECC to retrieve data to prefill the off-line adobe form and the e-mail of the external destinations.
3 - Send adobe form for e-mail to some external destinations.
4 - Receive and read adobe form by a dedicated e-mail.
5 - Send each adobe form by e-mail to an internal user that could approve or reject the document.
6 - Call some RFC to approved documents.
7 - Send e-mail back to the receivers to notify about the document if it was approved or rejected.

The problem is that I am trying to model but a lot of doubts about are breaking me, I need some process sample to follow.
Know I am creating a process model, I have read about the Process Modeling Approaches but still don´t know wich I should use to my model:
Top-Down Approach
Bottom-Up Approach
Inside-Out Approach
Taking into account that this process starts on ECC and my process will get data from ECC, prefill and send off line adobe forms by e-mail to get external data to send on ECC after it, with approach I should choice ?
Does anybody have any process model sample to send me ? It will help me a lot.

Adobe Form print/email - Attach IXOS .tif images via string table param?

I am attempting to create an Adobe Form print/e-mail output for Invoices, with zero, one or many attached pages from the IXOS archive. (TIFF files.) So far I have managed to attach exactly one IXOS image. Now I need to make the number of attached images dynamic.
This is in Netweaver 7.0 / ECC 6.0 ehp 3 / LiveCycle Designer 8.1.
My ABAP driver program is a copy of SD_INVOICE_PRINT01. In pseudocode, I've added:
Logic to identify correct IXOS image.
Logic to extract IXOS image to application server's file system.
OPEN DATASET image.tif FOR INPUT IN BINARY MODE.
READ DATASET image.tif INTO xstring.
CALL FUNCTION 'SSFC_BASE64_ENCODE' EXPORTING xstring IMPORTING string.
APPEND string TO string_table.
CALL FUNCTION form_name EXPORTING attachments = string_table.
The form interface is a copy of INVOICE_INTERFACE (ABAP dictionary-based.) I've added import param. ATTACHMENTS type STRING_TABLE.
In the form's context tab, interface import param. ATTACHMENTS was dragged & dropped onto the context pane, yielding:
- Table ATTACHMENTS
-- Structure DATA
--- Field ITEM.
In Adobe LiveCycle Designer 8.1, I *can* create an image field with binding ATTACHMENTS.DATA[1].ITEM - that prints the TIFF from IXOS just fine.
What *does not* work is placing ATTACHMENTS on the form as a table of image fields. I've tried several combinations - most look like this:
- Table or Subform ATTACHMENTS, binding ATTACHMENTS, repeat for each data item max = 1.
-- Row or Subform DATA, binding DATA[*], repeat for each data item min = 1.
--- Image field ITEM, binding ITEM.
The result is consistently one blank page. No more, no less.
Can anyone help?
Edited by: Eric Hopp on May 12, 2010 12:09 AM

Hello,
I have no experience regarding the table of pictures, but you could try a workaround if you don´t insist of displaying the images. You could attach the pictures as attachments (you know, the little attachments icon on the left in your Reader). The ABAP coding for this can be found in SE38 FP_* and when you check the descriptions you should be able to find the one working with the attachments.
Would be better than nothing I guess,
Otto

Adobe Forms - How do I set up e-mail responses

I am an HTML web designer who has been frustrated by forms. So I purchased Adobe Forms. Extremely easy to create.
Here's what I don't understand: When someone responds, is it possible to have the e-mail response sent to the people I am creating the forms for?
I thought it would be sent to them if they were listed as a collaborator, but the e-mail notifications don't go to them.
What can I do?
Stan Hoskins

Read this FAQ: http://forums.adobe.com/docs/DOC-1424
They need to go to their Options tab and turn it on. It is something each user controls, not you.
Randy

Send Adobe form as PDF via E-mail

Hi,
I am doing one interacive adobe form where i need to send that filled form in PDF format via email.
I tried using below options but unfortunately its not working:
1.I used "Email Submit Button" but its sending attachment as XML which I dont want.
when reffred threads on this problem , they suggested to go to XML VIEW of this button and change SUBMIT FORMAT to "pdf" from "xml".... but in this case , that button is not working at all.
2.I used below solution
Use a regular form button: Place a regular form button on your form . Look on the Object Window for the button. On the Field tag, towards the bottom will be a set of "Control Type" radio buttons. Select the "submit" option. There should now be a "submit" tab in the Object window. Switch to the tab and on the "Submit As" pulldown select PDF. But this is also not working.
Your comments are helpful for me.

Hi,
Get your form data in XML format from Interface. There are some standard classes available to convert the XML to PDF and sending mail.
Thanks,
Revanth Naidu

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (a

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Submitting Adobe Form by E-Mail

Similar Messages

Maybe you are looking for