Submitting firmware update requests for the HAP-Z1ES?

I was wondering if there is a link to where users can submit requests for future firmware upgrades.
It would be great if in the Audio Settings menu of the HAP-Z1ES, there could be a feature that allows you to change the phase settings of the two d/a converts (from "normal" to "invertred", and vice versa).  Stereophile's latest issue reviews this player and mentions that the phase of the L/R channels is inverted.  
This is something that you can changed via firmware, as the d/a chips in this unit have the feature of being software controlled and switching the phase is a feature of these chips.
Thank you.
Solved!
Go to Solution.

You can share your suggestion/s here. Thank you! 
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Similar Messages

  • No firmware update available for the n97?? uk!

    Howdy, so i plugged the phone in today to give it the firmware update from 10 to 11 but nokia updater told me a new version wasnt available.
    **bleep**?
    im using a black N97 Rm505
    Solved!
    Go to Solution.

    All you can do is be patient and wait. I'm also waiting for it.
    Recently nokia UK has been up to two months behind for firmware updates.
    If you want to complain use the "contact us" link near the top of the page and the link below:
    http://europe.nokia.com/get-support-and-software/download-software/device-software-update/feedback

  • Still no firmware update available for E71 RM-346

    Hi,
    According to Nokia (http://europe.nokia.com/A4577225), there should be a firmware update available for the E71 (update from version 100.07.76 to 110.07.127.
    I checked my product code (0569803) on http://europe.nokia.com/A4577224 "Can I update my Nokia device software?" and it tells me, that there is no update available:
    "Latest available software for Nokia E71, product code 0569803
    Version: 100.07.76" (> same firmware version which I currently have on my phone.)
    Does anybody know, when there will be a firmware update available for the E71 with product code 0569803?
    Thanks!
    E71-1
    0569803
    RM-346
    unbranded version!
    Solved!
    Go to Solution.

    I have an e71-1 (RM-346) and to this day i still cannot get an update. the phone freezes on mid answer and yet i still cannot fix it the phone came with firmware 200.21.118 and the nokia site says they are aup update 300.21.114 and other telling me they ave version 400.00.00 on theirs

  • 40L1353B firmware update request

    hi 40L1353B firmware update request .my info on the tv software upgrade V.2.0.8 .applacation version V0.3.4a . 2012/11/10
    in IP settings when looking at your static & dynamic ip is blured & unreadable
    when you press info bottom right the signal & quality are both just black blockes showing no info

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
    - Peter

  • Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed

    SharePoint 2010 -
    I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
    Export works fine. But during Import, I get the following errors
    [ListItem] [Admin] Progress: Importing
    [ListItem] [Admin]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Hol plans.xls] Progress: Importing
    [ListItem] [Hol plans.xls]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Time.doc] Progress: Importing
    [ListItem] [Time.doc]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [AP Docs] Progress: Importing
    [ListItem] [AP Docs]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Update - June 27th.pdf] Progress: Importing
    [ListItem] [Update - June 27th.pdf]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    Progress: Import did not complete.
    1. Does the console application treated as a Sandbox Solution?
    2. Do I need to configure CAS policy in wss_usercode.config? and what?
    3. What else could be configured to make this work?
    I have tried adding the following in wss_custom_minimaltrust.config but no avail.
    <SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>           
    and
    <PermissionSet
                        class="NamedPermissionSet"
                        version="1"
                        Name="SPRestricted">
    <IPermission
                          class="SqlClientPermission"
                          version="1"
                          Unrestricted="true"
                                />   
    <!-- Other IPermission -->
    </PermissionSet>
    UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
    Regards, Amit Gupta

    Hi,
    According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
    Simple solution is to change the trust the trust level to FULL: <trust   level="[Full]"    originUrl="URL" />
    In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
    For more information, you can refer to:
    http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
    http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
    http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Request for the creation of a new Unemployment account for tax

    Hi Guys,
    This is a question with regard to US tax. We have received a request for the creation of a new Unemployment account for the payment of taxes. This is because the account assignment number has changed for a particular company code in Tennassee state. Please let me know where this change could be made in SAP.
    Thanks,
    Subbaiah

    Subbaiah,
    Table T5UTL is used for New Tax Company Codes. If this is a new legal entity, youu2019ll need to set up the Tax Company here. Youu2019ll also need to assign at least one Personnel Area to this new Tax Company. This must be established in order to update the next table shown below, but only if itu2019s a new legal entity. The user will know.
    Table T5UTH is for establishing the account number to be used in BSI. It must be established in order to update the next table shown below.
    Table T5UTI is for assigning account numbers by Tax Company Code. Youu2019ll need one for Tax Authority TN, Tax Type 10. The user will need to supply this information to you.
    Table BTXRATE will need to be updated with the Tax Company Code, year, and the State Unemployment Insurance rate & taxable wage amount.
    Once this is done, youu2019ll need to update BSI.
    If Tennessee is a new state, youu2019ll have work to do with the tax models.
    Regards,
    Howard

  • While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen

    While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen and when i press the power button i hear the noise that it would make if it was going to start up. But i only see black.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • IPad Air iOS 8.1 stuck at "update requested" for over 24 hours

    I requested the update for the iPad Air, mini2 and iPhone 5s. The later two updates quite smoothly but no luck for the iPad Air.
    It has been in the "update requested" for over 24 hours, and even worse, any App Store app cannot updated nor download any new app.
    I have tried the hard reset, reset network settings, and reboot for at least 5 times. Anybody meeting the same problem?

    Oh how embarrassing and frustrating! I contributed to that other thread, which was specifically about iPad Air! My iPhone 6 was still updating apps just fine, and I had not bothered to delete the WSJ app from it, since I assumed it was not bothering it. Well, we know what happens when you "***-ume" (but no reflection on you, floydcui , just ME).
    I just deleted the WSJ app from my newsstand, restarted my iPhone and restarted my WiFi. INSTANTLY IOS 8.1 STARTED DOWNLOADING.
    You're right, how could one app cause so much frustration? I posted a comment to apple support how poisonous the WSJ app is, and I left a warning review among the hundreds already on the WSJ app page.

  • Firmware update available for 6230?

    Hi,
    new to this so sorry if its all been said before.
    I have a 6230 that I am loathe to get rid of, its a good phone, I wondered if there was a firmware update available for my current phone and how much Nokia charge for updating it as it is out of warranty.
    Any help/advice would be most appreciated.
    Current Nokia software version:
    V 05.24
    25-11-04
    RH-12
    GSM P1.1
    C

    The issues with the 6233 in a carkit are well publicised within these forums, I'll just give you a brief rundown.
    No 'lights on always' option, some say this is because of some EU directive, however it is rumoured that the 6233 is prone to screen burn. Either way it's a downright danger at night because your eyes down have time to adjust to the brightness when someone calls you or if you chose to make a call.
    You cannot record your own voicetags, an automatic voicetag system is in place for all contacts meaning for example instead of recording your own tag for the contact 'John A Mobile' as 'John', you'll have to say 'John A Mobile' and hope the 6233 understands you and doesn't either give you a list or pick the wrong contact altogether.
    Key 2 is now reserved for the video mailbox, so you cannot assign it as a speed dial key.
    Ring/Alert tones set at level 5 (maximum) do not ringout at full blast at first, they ascend. Not really an issue with a carkit, just annoys me as I can barely hear the SMS tone.
    Apart from all the above, I find the 6233 really good for texting and as a 3g bluetooth modem.
    If I had the choice again I'd either stick with the 6230 or put the money towards an offline 6230i for the slightly larger screen and because you don't have to change the cradle.
    First use the search to see if your question has already been answered...
    Secondly I will not knowingly assist in breaking the forum rules.
    My information is always changing, what I post at the time is usually true.

  • I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

    I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story...............         iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Error while maintaining the Update Rules for the Infostructure

    Hi,
    I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
    Please guide me in resolving the issue.
    Thanks & Regards,
    Kumar.

    Hi,
    This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
    Solution provider for this will be rewarded with good points.
    Regards,
    Kumar.

  • Good morning a few weeks ago  I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back,  and I can not  return it , i need to you sent me again the box for retu

    Good morning a few weeks ago  I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back,  and I can not  return it , i need to you sent me again the box for return the ipod

    Best thing would be to call Apple up again, and let them what has happened and they'll help you!

  • Creation of Trasport request for the Deletion of Infoset from Dev

    Hi
      i want to create a trasport request for the deletion of infosets from dev system and want to trasport request in to production.
    i wish to know while right clicking the info set and selecting deletion will it prompt for trasport request.
    could any one help me out for this issue.
    Thanks
    Sandy

    Hi
    I suggest you to transport the  Infoarea under which the Infoset query is deleted
    This will adjust all your changes including any deletion or any new changes
    Assign points if useful
    Thanks
    N Ganesh

  • I am getting error code -9808 saying cannot complete request for the i  store, i am getting error code -9808 saying cannot complete request for the i  store

    i am getting the erorr code -9808 saying that we cannot complete my request for the i store to setup my new device ...what up with that

    Try here:
    iTunes Store: "An unknown error occured (-9808)"

  • The precondition on the request for the URL / evaluated to false

    Hi,
    I get error message when connect on secure 443 port:
    "The precondition on the request for the URL / evaluated to false."
    Problem in:
    <Location />
    SetHandler weblogic-handler
    WLExcludePathOrMimeType /DocumentServer
    </Location>
    It works in httpd.conf, but does NOT work in ssl.conf
    We are using WL8.1 and Apache 2.0.48
    Thanks,
    Oleg.

    Have you looked at the support pattern for SSL and Web Server plug-ins?
    https://support.bea.com/application_content/product_portlets/support_patterns/wls/SSLAndPlug-inPattern.html

Maybe you are looking for