Subnets and DHCP Scopes One More Time

If my subnets are all subnets off of the same network such as 192.168.43.0/19 and the subnets are 192.168.43.0
192.168.43.32 and so on can a single router handle all the subnets as relay agents? I'm assuming I don't need separate routers for each subnet or separate NIC's for each subnet. Thanks for all your help.
Michael T. Glenn
Michael T. Glenn

Hi,
If you have multiple subnets in your network, and do not have a DHCP server on every subnet, you can configure a DHCP relay agent or use a multihoming DHCP server. In general, the router acts as a DHCP relay agent in a routed network.
For more detailed information, please refer to the link below:
Enabling DHCP Support for Multiple Subnets
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

HT5552 Apple decline payment method for apple ID (credit card VISA) after 2 weeks of active using it. And did it one more time

Few mothes ago I registered my Apple ID.Payment method chose credit card VISA. It allowed me to make purchases and download apps. But after 2 weeks it said that my payment method was declined and I have to register and pay 1$ once again. So I registered one more time with the same credit card, made several downloads and purchases and after 2-3 weeks the situation was the same. My payment method was declined. What is the reason?

Kateryna Malykhina wrote:
... My payment method was declined. What is the reason?
As this is a User to User forum no one here would know...
You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

Not sure if I am doing this right. This is my first time in the support community.
I imagine what I put in my heading was supposed to go in here.
I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

Why do ISPs insist upon making things so difficult for their customers?
If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
Scroll down to DHCP Settings
You will need to log in with proper "technician" credentials. They are provided in the above link as
Username: tech
Password: t3lu5tv
... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted.

My iphone has broken and I had songs that I had purchased on there that I had not yet backed up on my computer. apparently you can download the tracks one more time free of charge does anybody know how??

how do you re download tracks that are on a broken iphone???

apparently you can download the tracks one more time free of charge does anybody know how??"
Not true. You get one and only one download.
In some instances, itunes has allowed another download to a few. This is not the norm.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
Hope all goes well.
http://www.apple.com/support/itunes

Big problem with my macbook pro 2009 - 3 motherboard changed at applestore Velisy and one more time it is for nothing.... ! Apple says you're not lucky?????

3 motherboard i have changed at applestore Velisy and one more time it is for nothing.... !
Apple says you're not lucky????? What can i do

A sorry it 's macbook pro unibody from 2011

[svn] 1594: Update the warning message when outbound throttle policy of REPLACE is used one more time .

Revision: 1594
Author: [email protected]
Date: 2008-05-07 11:10:27 -0700 (Wed, 07 May 2008)
Log Message:
Update the warning message when outbound throttle policy of REPLACE is used one more time. Now the warning says this. . .
Throttle outbound policy 'REPLACE' found on message destination 'MESSAGE_DESTINATION'. The 'REPLACE' throttle outbound policy has been deprecated. Please remove it from your configuration file.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageDestination.java

hamish72 wrote:
You can still download as much as you can only a lot slower during peak times off peak will not be restricted.
Thanks for this explanation. I had taken it that it was at all times.
As I said in the first place it will be great if they throttle me to 1Mb at peak times as it will be better half the time than I am getting anyway!!!!!!!!!
hamish72 wrote:
Have you chased up why your line is so bad, long way from exchange and so on
Posting your router stats may get advice from someone
enter for homehub for other routers will differ
192.168.1.254 in browser click A to Z top right
then ADSL enter pas and click MORE DETAIL
POST RESULTS
Also post results of test at ( best done from master test socket)
http://speedtester.bt.com/
Connection Information
Line state
Connected
Connection time
6 days, 11:57:55
Downstream
5,760 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.7 dB / 21.0 dB
Line attenuation (Down/Up)
44.6 dB / 24.0 dB
Output power (Down/Up)
8.9 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
25279 / 134
CRC Errors (Down/Up)
700 / 196
HEC Errors (Down/Up)
5427 / 142
Error Seconds (Local/Remote)
477 / 102

How to download one more time the purchased content?

I purchased yesterday the OST of Fast Five, and unexpectedly I deleted it from my Mac. How to access it one more time?

If you are in a country where you can re-download music, and if it is still in the store, then it should show under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes for re-downloading. If you aren't in a country where music can currently be re-downloaded then you will need to try contacting iTunes Support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have to pay one more time!

Hi!
I have bought the album called "Disc-Overy" from Tinie Tempah. I did reset my iPhone and set it up as a new iPhone. I also synced with another iTunes library. Now iTunes ask me to pay for the album again! I aldo bought the ringtone called "Levels" of Avicii and I have to pay for that one more time too!
And when it comes to app. I downloaded iCopter from appstore. I bought the pro version in-app and when i try to do the same again with this newly setup iPhone I also have to pay for this one more time! Please help me!

I've had the same problem with the albums when switching iPhones.
Usually when you click purchase in the app- or itunes store it will start the download but will then give you the message: "You've already bought this item, do you want to download it again?". In that case you won't be charged twice, but in my expirience that won't show up untill you're willing to make the purchase.
Best thing would be to just sync the new iPhone with iTunes if that already contains your purchased apps, books and music.

HT201272 I bought PDF expert $9.99 for my ipad. When I tried to download to my iphone 5 , they tried to charge me one more time. Any solution?

I bought PDF expert $9.99 for my ipad. When I tried to download to my iphone 5 , they tried to charge me one more time. Any solution?

There are two separate PDF Expert versions on App Store: PDF Expert for iPad and PDF Expert for iPhone. PDF Expert for iPad differs from iPhone version and both versions are not free.

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
We have verified all the Assignment Rules, Views.
We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
Version Siebel 7.7.2.12,
OS Solaris.

let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
3. Make a snapshot of v$system_event:
create table begin as select * from v$system_event;After the import run
create table end as select * from v$system_event;Now compare the values:
select * from begin order by TIME_WAITED_MICRO descwith the values given you by
select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
Alternativly, you could start a 10046 trace on the loading session and use tkprof.
Dim

Move one DHCP scope at a time

I'm migrating from a Windows 2003 server running DHCP to a Windows 2012 server with DHCP. I would like to do the migration by moving a single scope at a time. I'm only finding ways to move the entire scope. Can you move a single
scope at a time? I really appreciate any help.

Hi
on server 2003
- cmd console "netsh dhcp server export c:\dhcpbackup.txt all
->enter
- stop dhcp serivce and set start up type "disabled"
copy "dhcpbackup.txt" file from 2003 to 2012 (on c drive or etc)
- install DHCP role on server 2012 but do not configure or create any scope.
- also check for is there any scope on 2012 "netsh dhcp server Show scope" if there is any "netsh dhcp server delete scope(ip of scope) dhcpfullforce" to delete
- "netsh dhcp server import c:\dhcpbackup.txt all" (where the backup file avaible)
- finaly server manager->Tools- Open "DHCP" check the situation (if there is a red cross on,right click on dhcp server click "authorize" and "Activate" .
Or you can use migration tool also;
https://technet.microsoft.com/en-us/library/dd365353%28WS.10%29.aspx?f=255&MSPPError=2147217396

DNS and OD One More Time Please

I'm in the process of installing Lion Server into an environment that currently has no AD or OD running. This particular server is going to be used only for file sharing and home directories.
The DNS for their main domain is all handled outside of the building and I don't really care to attempt to alter or comingle any of it with what we're doing here.
My goal is to simply get the users to a point where they can boot up a Mac in the building, login via their credentials, and see their own personal desktop.
I currently have DNS "running", in the sense that I have a single Primary Zone, and a single Reverse Zone. The primaryzone is simply called xyzserver.local and there is one machine listed under it that resolves xyzserver.local to it's own IP address.
Similary, in OD, I have it set upas an Open Directory Master, but have not changed any of the default settings beyond that.
I've read other posts and am quite honestly stumped on how to proceed next.
If any of you can help by providing some additional insight, or point me to a tutorial on how to do just that, I would greatly appreciate it.
We don't need to be running any mail services, web services, calendaring, etc. and none of it needs to see the outside world. (If that helps.)
Thanks a bunch in advance.

The "domain" I'm using is a .local, does that need to change to a .com or something similar
There are many theories as to what you should use for your private DNS domain. Some people advicate using a .local domain, others say .private, others use .com. There is no hard and fast rule, it's largely up to you.
Personally, I use the same domain internally as externally. This might create a little extra work for you but it can make life a lot easier for your users, especially mobile users that switch between internal and external networks - for example, they can leave their mail client set to 'mail.company.com' and know they'll get the public address when they're outside, and the private address when they're inside, as opposed to having to use different server names based on where they are. On the flip side, though, most end users don't really understand DNS and can't understand how 'mail.company.com' can be different things depending on where you are. It's your call.
where do I enter such information in the DNS record?
There is no 'DNS record' there are multiple records, at least one per host.
In Server Admin you'll create a zone (based on the .local/.private/.com domain as discussed above), then within that zone you'l add additional records - one for every host/server in your domain. Rinse, repeat.

One more time - problems with fans

I realize this is but one of hundreds or possibly thousands of cases of Mac users being plagued by fan noise problems, but to me it has been a long and extremely frustrating saga. I have been a Mac user since the very beginning, through different versions of Macs and iMacs, and this is the first time I ever refer to a Macintosh as a "piece of junk."
I bought my iMac G5 in August 2005, a 20-inch ALS with 250 GB hard drive and 512 MB RAM. It worked perfectly until January this year, when all of sudden it shut down by itself. Freaked me out completely. Turned out to be power supply problem (EMC 2056) which Apple never informed me about.
I brought it to a repair shop that fixed the intermittent shut-down problem. I also added 1GB memory. But then the fans started to go berserk. Before the power supply problem, I only heard the fans whenever I used a large program like Photoshop. For the most part, it was a very quiet machine. After the power supply was replaced, within minutes of turning the iMac on, I could hear the fans spinning faster and faster, stabilizing at around 4400 rpm and did not stop spinning until I put the iMac to sleep or turned it off, regardless of CPU usage or software being used.
I checked the discussions at this forum (over 500 posts, no real answer) and did every "voodoo trick" suggested: I reset the SMU dozens of time, cleaned the inside of the iMac and around the fan area, did apple hardware test (everything was fine), monitored temperature and activity with XRG (average CPU at 160F, hard drive at 113F), cleaned out caches, tested for corrupt preferences, re-installed the original OS 10.4 (which only made the fans louder), upgraded it back to OS 10.4.9. I also removed the additional 1 GB memory, thinking it might be a bad piece. It didn't help.
Finally, I requested fan replacement from Apple and got them. I installed them last Sunday and now the problem is even worse! Within SECONDS of turning it on, the CPU T- Dio soars to around 170F, even while the machine is still stone cold to the touch. The hard drive temperature now averages at 117F, CPU fan is never below 4000 rpm (4400 rpm 98% of the time), even at 5-8% CPU usage.
The fans themselves are much quieter because they're brand new. But you can still hear the hums and whirs and it drives me nuts. More seriously, my iMac is now narcoleptic. If I use it too long (a few hours on a stretch) it will put itself to sleep, apparently because it thinks it is overheated. And when I use Photoshop or Illustrator, the awake time is even shorter. Depending on the outside temperature, at the most I can only use them for about an hour at a time. Two days ago we had heat wave, and even with the air conditioner running full blast in my study, the iMac kept falling asleep within minutes of using Illustrator.
Right now I am using TextEdit and no other program is running. Uptime is 59 minutes, average CPU 9.6%. CPU T-Dio is at 168.8F, hard drive 117.5F, CPU fan at 4400 rpm. I am out of ideas and before I do something drastic to this machine, if anyone knows what's going on with my iMac (I know every case is different), please help!
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB

I do not have the solution... but the same problem with a nice iMac G5 purchased in July 2005.
My Mac operated very silently untill 6 month ago;problem MAY ( I am not sure) have started when I upgraded to 10.4.10 ; even with few applications and low CPU usage (80% or more inactive), it seems that I have the following regrettable chain of events;
==> the CPU temperature is quite high ( 60°c to 72°c most of the time, ie 140-160 °F)
==> resulting in fan turning at high speed ( 2.000 for CPU and system, 2500 for HD), and changing speed all the time
==> resulting in a noisy computer
I am SURE this was not the case 6 month ago, and I suspect it is linked to my upgrade to 10.4.10.
I did all sorts of reinstall, authorization repair, SMU reset, fan clean-up with no sucess.
iMac G5 (2005) Mac OS X (10.4.10) POwerbook G4 Titanium (2001)

My iPod 5th gen is no longer charging. I've cleaned out lint, switched chargers, and reset the device more times than I can count. I'm just wondering if there's anything I can do to fix it, or if it's a lost cause.

I've had my iPod touch 5th gen for a little over 2 years now. a few weeks ago, I went to plug my iPod into the charger. After about 20 minutes I went to go get it so I could reply to texts and clear some notifications and I noticed that it was still at 20%. So I tried a different cord, different outlet, cleaned out any lint that might be in there, and reset the iPod more than once. Nothing worked. Eventually the problem corrected itself. But then it happened again a few days later. And then it happened just recently, and now it's happening again. In total it's happened 4 times, the first 3 times its corrected itself, but this time it's not. I'm not sure if there's anything else I can do, or if it's just a lost cause.

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable unless the cable you tried works with another device
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Subnets and DHCP Scopes One More Time

Similar Messages

Maybe you are looking for