SubNotFoundException under Linux not under Windows

Hi,
I got a RMI client server application. The server runs normal on my windows machine with JRE 1.5. But when I want to run it on my linux server with JRE 1.4, I get the following error:
java.rmi.StubNotFoundException: Stub class not found: .....
I used an Ant Build.xml file to create jar (2 --> 1 remote.jar and 1 server.jar) files. In the javac I set the target to 1.1. In rmic I used stubversion and set to 1.1. All my remote objects are in a seperate jar file that is included in my path when I start my server. I start my server with a bat and a sh file.
run.bat (under Windows)
set CPBEFORE=%CLASSPATH%
set CLASSPATH=%CLASSPATH%;PpdaRemote.jar
start rmiregistry 10001 -J- Djava.rmi.server.hostname=willemc
set CLASSPATH=%CPBEFORE%;
java -jar PpdaServer.jar
run.sh (under Linux)
CPBEFORE=$CLASSPATH
export CLASSPATH="$CLASSPATH:PpdaRemote.jar"
rmiregistry 10001 -J- Djava.rmi.server.hostname=willemc &
export CLASSPATH=$CPBEFORE
java -jar PpdaServer.jar
Can anybody think of a solution for this. I have been working on it for a couple of hours. Upgrading my server to 1.5 is not possible (it's a sgi server).
Thanks,
Willem

Nevermind. Fixed my own problem.

Similar Messages

T430 Discrete GFX under Linux not booting

Hi all. I recently purchased a T430 with the NVS 5400M 2GB discrete GPU with the intention of using it as my dev machine for CUDA work. Unfortuneately, when I set the machine to boot with Optimus OS check disabled and the GPU set to Discrete I cannot boot into linux. I have tried installing with the inbuilt graphics, instlaling the NVidia binary blob, then changing over but the system just hangs while booting. I have tried booting into a live CD with the discrete option and it has failed to boot, and have tried a text-based installation and it still fails. I have been using Ubuntu 12.04 x64 default, alternate, and even Xubuntu. I have come to understand that this distro was supported (or at least proven to work) on this machine, but I haven't achieved this with the NVidia GPU.
If anybody has any suggestions for this I would greatly appreciate it. Thank you.
Lee.
Solved!
Go to Solution.

Hello Loriordan,
I have T430 and was interested in the issues you were having and set my BIOS settings to what you stated and tried to load my Ubuntu 12.04 LTE x64 ( its on duel boot with Windows 7) and got a screen that was lined/black/purple/fuzzy and just frozen. I Know for a fact that if I revert the settings that I will be able to load into Ubuntu 12.04. As a side note windows 7 x64 bit loads fine with the BIOS setting you said. I know this isn't really a solution but a affirmation of your problem but I will be looking into it and I will get back to you with any fix or work around I can find.
Best Regards,
Hiro
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

Barcode Fonts. Ok on Linux, not on Windows

Hi all.
I need to print a PDF (or even HTML) report, which uses a barcode font. I placed the TTF fonts under reports/fonts, and included on the REPORTS_PATH. Installed the fonts on the client machine.
On a Linux server, it works (the report prints correctly). But on a Windows Server, the font is not recognized. Output as PDF or HTML, the results are the same.
What am I missing? The reports version is 11.1.2.
OEL 5.8 and Windows 7 32 bits.
Thanks in advance

Hello,
Is it a new Font installed recently ?
Do you know if the Windows has been rebooted since the font has been installed ?
Regards

Background Task running under initiator not under WF-BATCH

Hi All,
I am trying to resolve a problem with a Background task running under intiator. Since the initiator does not have authorization to execute the task, it is not working.
My understanding was, all background tasks will run under WF-BATCH!!. Is it correct?. in 4.7, it is working this way.
However in ECC 6.00 the background task before the first dialog work item is executed under 'intiator' in this case. I have moved the same task after first dialog work item, and it was executed under WF-BATCH.. I cannot move the task after the dialog workitem as the task need to be executed immediatly after the creation of workflow.
1. How can I run the task in backgroud under WF-BATCH?
2. Inside the task, I am running a BDC to update a flag in downpayment transaction created using F-47. How can I run the process under batch user to overcome the authorization issue that initiator will not authorization.
I am running this workflow in SAP ECC 6.0 level 13
Any help is really appreciated..
thanks in advance for your help.
johnson

This issue can be resolved with triggering the event using the additional flag export parameter 'CREATOR' in function module ''SWE_EVENT_CREATE_FOR_UPD_TASK' as WF-BATCH. I was not passing this parameter and hence it didn't work in ECC 6.0 as it take who ran the process as creator and ran the background task under that users id.
Thanks Rachid for your input to resolve this problem.
johnson zavier

Portege Z930 - slow Wi-Fi on battery under Linux

Hi,
I've just bought a Z930 and I run it under Linux Mint and Windows 7.
I've a problem under Linux that I don't have on Windows.
When I put my computer on battery, there is a significative signal lowering.
Do somebody why there is such a problem ? Can we fix it by configuring my network device ?
Thanks for your help !
Badmaul

Sounds like the Wifi driver needs updating, perhaps try an Ubuntu Live CD v12 and see how that goes. Ubuntu is very Toshiba friendly now.

Does ds 52 run as 64 bit app under linux?

does ds 52 run as 64 bit app under linux?
Under 64 bit RH 3 AMD64 V20Z?
Under 64 bit RH 3 on Dell or other x86 64 bit hardware?
I've searched all over the public Sun site with no conclusive answer.
Thanks, Mike

No. 32 bit on Linux.

JMF code working under linux but not windows XP

Hello everyone,
I'm currently working on a nice cross-platform project involving sound producing. I decided to take a look at JMF and test it a bit to know if its features can suit me. I tried to make it works under windows, using a very simple sample of code. The system seems to play the sound as some console output detects the start and the end, but all i hear is a very short noise ( 1/2second ) like a "CLIK" and nothing else. I tested the code under linux, using the same computer and it works just fine, playing the same wave nicely and entirely.
some info:
-i used the cross platform JMF, no performance pack ( i tried it , but still no result )
-the code just opens a file dialog and plays the selected file
-the selected file was always a very simple .wav
-i did not use system classpath variables because i don't like it, i rather use local classpath ( which works fine too, no doubt about it )
-i tested this little soft on 2 other computer using windows XP, and still got the same result.
Please, have you got an idea about what's going on ?
Thanks a lot for any answer!
Maxime - Paris . France
Code Sample:
import java.io.File;
import java.io.IOException;
import java.net.MalformedURLException;
import javax.media.*;
import javax.swing.JDialog;
import javax.swing.JFileChooser;
import javax.swing.JOptionPane;
public class JMFSound extends Object implements ControllerListener {
     File soundFile;
     JDialog playingDialog;
     public static void main (String[] args) {
          JFileChooser chooser = new JFileChooser();
          chooser.showOpenDialog(null);
          File f = chooser.getSelectedFile();
          try {
               JMFSound s = new JMFSound (f);
          } catch (Exception e) {
               e.printStackTrace();
     public JMFSound (File f) throws NoPlayerException, CannotRealizeException,     MalformedURLException, IOException {
          soundFile = f;
          // prepare a dialog to display while playing
          JOptionPane pane = new JOptionPane ("Playing " + f.getName(), JOptionPane.PLAIN_MESSAGE);
          playingDialog = pane.createDialog (null, "JMF Sound");
playingDialog.pack();
          // get a player
          MediaLocator mediaLocator = new MediaLocator(soundFile.toURL());
          Player player =     Manager.createRealizedPlayer (mediaLocator);
player.addControllerListener (this);
player.prefetch();
player.start();
playingDialog.setVisible(true);
     // ControllerListener implementation
     public void controllerUpdate (ControllerEvent e) {
System.out.println (e.getClass().getName());
     if (e instanceof EndOfMediaEvent) {
               playingDialog.setVisible(false);
               System.exit (0);
Message was edited by:
Monsieur_Max

Hello everyone,
I'm currently working on a nice cross-platform project involving sound producing. I decided to take a look at JMF and test it a bit to know if its features can suit me. I tried to make it works under windows, using a very simple sample of code. The system seems to play the sound as some console output detects the start and the end, but all i hear is a very short noise ( 1/2second ) like a "CLIK" and nothing else. I tested the code under linux, using the same computer and it works just fine, playing the same wave nicely and entirely.
some info:
-i used the cross platform JMF, no performance pack ( i tried it , but still no result )
-the code just opens a file dialog and plays the selected file
-the selected file was always a very simple .wav
-i did not use system classpath variables because i don't like it, i rather use local classpath ( which works fine too, no doubt about it )
-i tested this little soft on 2 other computer using windows XP, and still got the same result.
Please, have you got an idea about what's going on ?
Thanks a lot for any answer!
Maxime - Paris . France
Code Sample:
import java.io.File;
import java.io.IOException;
import java.net.MalformedURLException;
import javax.media.*;
import javax.swing.JDialog;
import javax.swing.JFileChooser;
import javax.swing.JOptionPane;
public class JMFSound extends Object implements ControllerListener {
     File soundFile;
     JDialog playingDialog;
     public static void main (String[] args) {
          JFileChooser chooser = new JFileChooser();
          chooser.showOpenDialog(null);
          File f = chooser.getSelectedFile();
          try {
               JMFSound s = new JMFSound (f);
          } catch (Exception e) {
               e.printStackTrace();
     public JMFSound (File f) throws NoPlayerException, CannotRealizeException,     MalformedURLException, IOException {
          soundFile = f;
          // prepare a dialog to display while playing
          JOptionPane pane = new JOptionPane ("Playing " + f.getName(), JOptionPane.PLAIN_MESSAGE);
          playingDialog = pane.createDialog (null, "JMF Sound");
playingDialog.pack();
          // get a player
          MediaLocator mediaLocator = new MediaLocator(soundFile.toURL());
          Player player =     Manager.createRealizedPlayer (mediaLocator);
player.addControllerListener (this);
player.prefetch();
player.start();
playingDialog.setVisible(true);
     // ControllerListener implementation
     public void controllerUpdate (ControllerEvent e) {
System.out.println (e.getClass().getName());
     if (e instanceof EndOfMediaEvent) {
               playingDialog.setVisible(false);
               System.exit (0);
Message was edited by:
Monsieur_Max

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Runtime.exec() does not work under Linux

Hi,
I have a generic application runner class that runs an external
program and redirects stdout/stderr to a buffer/file.
While everythings works just fine under Windows, I get the
following exception under Linux trying to run the Java interpreter
'java':
java.io.IOException: "/usr/lib/SunJava2-1.3.1/jre/bin/java": not found
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:139)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:546)
at java.lang.Runtime.exec(Runtime.java:413)
I have checked that the file /usr/lib/SunJava2-1.3.1/jre/bin/java
exists.
Any help appreciated!
Marc

can I ask how you solved it? I am having a problem
with quotes just now to and it might help me!I simply tested what the current platform is and
only used quotes under Windows.
Marc

JCombox does not work under linux (fedora) could you help me???

Hi All,
I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
Here is the simplify code:
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.Serializable;
import java.util.Vector;
import javax.swing.ComboBoxModel;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.event.ListDataEvent;
import javax.swing.event.PopupMenuEvent;
import javax.swing.event.PopupMenuListener;
import java.awt.event.*;
import javax.swing.*;
//carmen
import javax.swing.filechooser.*;
import javax.swing.event.*;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.border.*;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
import java.io.*;
import java.util.*;
import java.lang.String.*;
public class Test extends JFrame
     private JComboBox jComboBox1;
     private JComboBox jComboBox2;
     private JPanel contentPane;
     private JTabbedPane jTabbedPane1;
     //Main Tab
     private JPanel Main;
     private JPanel OutputSimSet;
     private JPanel Test;
     private JPanel ScriptGenTab;
     private JPanel ResultTab;
//Result Tab
private JPanel SimResult;
     public Test()
          super();
          //initializeComponent();
          contentPane = (JPanel)this.getContentPane();
          jTabbedPane1 = new JTabbedPane();
          Main = new JPanel();
          OutputSimSet = new JPanel();
          Test = new JPanel();
          ScriptGenTab = new JPanel();
          ResultTab = new JPanel();
          SimResult = new JPanel();
     jComboBox1 = new JComboBox(
                    new String[]{"Item 1","Item 2", "Item 3"});
                    jComboBox1.addActionListener(new ActionListener() {
                    public void actionPerformed(ActionEvent ae) {
                    System.out.println("Yeah");
     jComboBox2 = new JComboBox(
                              new String[]{"Item 1","Item 2", "Item 3"});
                              jComboBox2.addActionListener(new ActionListener() {
                              public void actionPerformed(ActionEvent ae) {
                              System.out.println("Yeah");
          // jTabbedPane1
          jTabbedPane1.addTab("Main", Main);
          jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
          jTabbedPane1.addTab("Simulation Result", ResultTab);
          jTabbedPane1.addChangeListener(new ChangeListener() {
               public void stateChanged(ChangeEvent e)
                    jTabbedPane1_stateChanged(e);
          // contentPane
          contentPane.setLayout(new BorderLayout(0, 0));
          contentPane.add(jTabbedPane1, BorderLayout.CENTER);
          // Main
          //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Main.setLayout(new BorderLayout(0, 0));
          Main.add(OutputSimSet,BorderLayout.NORTH);
          OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          OutputSimSet.add(Test, 0);
          Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Test.add(jComboBox1,0);
          //ResultTab
          ResultTab.setLayout(new BorderLayout(0, 0));
          ResultTab.setBorder(new TitledBorder(""));
          ResultTab.add(SimResult, BorderLayout.NORTH);
          SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          SimResult.add(jComboBox2,0);
          // Test
          this.setTitle("Test");
          this.setLocation(new Point(0, 0));
          this.setSize(new Dimension(600, 500));
          this.setVisible(true);
     public void initializeComponent()
     /** Add Component Without a Layout Manager (Absolute Positioning) */
     private void addComponent(Container container,Component c,int x,int y,int width,int height)
          c.setBounds(x,y,width,height);
          container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
          System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
          // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jComboBox1_actionPerformed(ActionEvent e)
          System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
          Object o = jComboBox1.getSelectedItem();
          System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
          // TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}

package oct03_JCBox;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
//private JPanel OutputSimSet;
//private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
//private JPanel SimResult;
public Test()
     super();
     //initializeComponent();
     contentPane = (JPanel)this.getContentPane();
     jTabbedPane1 = new JTabbedPane();
     Main = new JPanel();
     ScriptGenTab = new JPanel();
     ResultTab = new JPanel();
//     OutputSimSet = new JPanel();
//     Test = new JPanel();
//     SimResult = new JPanel();
     jComboBox1 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox1.addActionListener(new ActionListener() {
     public void actionPerformed(ActionEvent ae) {
          System.out.println("Yeah");
     jComboBox2 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox2.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent ae) {
               System.out.println("Yeah");
     // Main
     //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.add(jComboBox1);
     //ResultTab -----
     ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     ResultTab.add(jComboBox2);
    //      jTabbedPane1
     jTabbedPane1.addTab("Main", Main);
     jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
     jTabbedPane1.addTab("Simulation Result", ResultTab);
     jTabbedPane1.addChangeListener(new ChangeListener() {
          public void stateChanged(ChangeEvent e)
               jTabbedPane1_stateChanged(e);
     // contentPane
     contentPane.setLayout(new BorderLayout(0, 0));
     contentPane.add(jTabbedPane1, BorderLayout.CENTER);
     // Test
     this.setTitle("Test");
     this.setLocation(new Point(0, 0));
     this.setSize(new Dimension(600, 500));
     this.setVisible(true);
     public void initializeComponent()
//     /** Add Component Without a Layout Manager (Absolute Positioning) */
//     private void addComponent(Container container,Component c,int x,int y,int width,int height)
//     c.setBounds(x,y,width,height);
//     container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
     System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
     // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
//     private void jComboBox1_actionPerformed(ActionEvent e)
//     System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
//     Object o = jComboBox1.getSelectedItem();
//     System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
//     // TODO: Add any handling code here for the particular object being selected
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
     private static void createAndShowGUI() {
     //Create and set up the window.
     Test frame = new Test();
     frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     frame.pack();
     frame.setVisible(true);
public static void main(String[] args) {
     //Schedule a job for the event-dispatching thread:
     //creating and showing this application's GUI.
     javax.swing.SwingUtilities.invokeLater(new Runnable() {
     public void run() {
     createAndShowGUI();
} Try this - you use too many unnecessary JPanels.
Which way you prefer with actionPerformed should work either way.
I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
not add the panel first and then try to set attributes like layout, color, etc...

Jdevloper under windows & AS under Linux

Dear all
I develop a project using Jdeveloper under windows, but when its deployed on linux, i get some problems in running the project while it work fine when i deploying it on AS under windows.
do i have to use jdeveloper under linux to develop project that will be deployed under linux.

Dear sirs...
i have a very similar problem. i am using jdeveloper 10g 10.1.2.1 under windows with the oracle application server 10g release 2 . under windows it works fine. under linux it works partially. i am using intermedia. when i upload a file i can not naviagte into any other page. however under windows it works perfectally well.
i tried to get JDK from sun in order to use jdeveloper under linux, but i get problems with downloading the jdk.
can any one help me with this??? if i where can i get jdk for linux????
best regards

SetForeground in Applet does not work (Netbeans under Linux)

I'm attempting to make a Breakout version of java (if I go through with it) and the first issue that I encountered is that I can't change the color of the moving rectangle (you know, the thing you hit the ball with). I tried the code under Textpad on a Windows machine and that worked fine, but not under Netbeans in Linux using jdk 1.6.0_01.
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
public class Breakout extends Applet implements MouseListener, MouseMotionListener{
     int mouse_x, mouse_y;
     Thread t;
     public void init(){
          addMouseListener(this);
          addMouseMotionListener(this);
     public void start(){
          t= new Thread();
          t.start();
     public void run(){}
     public void mouseClicked(MouseEvent me){ }
     public void mouseEntered(MouseEvent me){ }
     public void mouseExited(MouseEvent me){ }
     public void mousePressed(MouseEvent me){ }
     public void mouseReleased(MouseEvent me){ }
     public void mouseDragged(MouseEvent me){ }
     public void mouseMoved(MouseEvent me){
          mouse_x = me.getX();
          if(mouse_x>=400)
               mouse_x=400;
          repaint();
     public void stop() {}
     public void destroy(){ }
     public void paint(Graphics g){
          setBackground(Color.black);
          setForeground(Color.white); //doesn't work
          g.drawRoundRect(mouse_x, 600, 50, 20, 20, 20);
}I'm wondering if it's because the Applet under Linux uses the Native l&f theme while appets under Windows uses the Windows l&f theme.
Any thoughts would be helpful!

setForeground(Color.white); //doesn't work
g.drawRoundRect(mouse_x, 600, 50, 20, 20, 20);Change this to:
g.setColor(Color.WHITE);
g.drawRoundRect(mouse_x, 600, 50, 20, 20, 20);You can move the background setting into method init(), calling it once is enough.
I'm wondering if it's because the Applet under Linux
uses the Native l&f theme while appets under Windows
uses the Windows l&f theme.You use java.awt.Applet, so you use AWT which means there's no L&F theme (as in Swing) but it's native components being responsible.

Gif images is not coming in oracle forms 9i under linux

I am trying to show images using Read_Image_File under
linux os ,at run time i am not able to see images.
If any one solution pl mail me at [email protected]

A couple of suggestions -- put the image files in your FORMS90_PATH that is set in default.env, and also be aware of case-sensitivity of file names.

I have an iphone 4 and downloaded my first movie (hd) onto my PC (windows 7) I have not been able to figure out how to transfer the move to my iphone. The movie is in a new tab called "rented" not under the "movie" tab.

I have an iphone 4 and downloaded my first movie (hd) onto my PC (windows 7) I have not been able to figure out how to transfer the move to my iphone. The movie is in a new tab called "rented" not under the "movie" tab. All of the support I have read talks about the movie being in the "movies" tab. I cannot use the "move" function or the "transfer" function because they are not available. Is this an issue because I just updated to the newest software?

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

Rman of database under Linux from Windows server

Dear colleagues! I need some help.
I have Oracle database 10.2.0.1, which works under Linux CentOS. I've just set up rman, to backup this database to local linux partition. Now, i want to adjust rman, so it starts from Windows 2003 ( i've already install Oracle 10.2.0.1 client for Wondows 32-bit) server to backup this database to local Windows folder.Could you please answer, is it possible at all?
When i try to perform rman from Windows manually i got this errors:
channel t1: starting piece 1 at 29-APR-10
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 04/29/2010 03:07:32
ORA-19504: failed to create file "/u02/app/oracle/product/10.2.0/db_1/dbs/c:123
bak"
ORA-27038: created file already exists
Additional information: 1

1. You can run the backup from windows server 2003 which take the RMAN backup of your linux server. But this backup can only stored into your linux server.
2. You can't store the backup set of linux server into windows server.
Regards
Asif Kabir
-- mark your helpful post as correct/helpful.

SubNotFoundException under Linux not under Windows

Similar Messages

Maybe you are looking for