Subreport as a reportparam not using the proper query
I am trying to use a report with a subreport, normally works fine, but I want to pass a query to the subreport, not let it use its internal query. This works fine if I call the sub report by itself and hand it the query. AS a report it runs fine. When I use it as a reportparam it ignores the query. Very very frustrating.
HI Martin,
i am not realy sure what you want!?!?
i think you want to display only a part of the values you read from XYZ
so what you can do:
write all the values in an array.
the size of the array is the max. value of the slide bar
now you can select a part of the array (e.g. values from 100 to 200) and display this with a graph
the other option is to use the history function of the graphes
regards
timo
Similar Messages
-
Iphoto does not use the proper display profile
Hello.
I just bought a 20' Apple Cinema display and connected it to my Macbook. I have noticed a very strange behavior of iPhoto and Preview.
I will first describe the expected (right behaviour).
When I drag an image opened in Adobe LG or Aperture from the Macbook display to the Cinema display (or the opposite) after a very small delay the color of the image adapts to the color profile of the display where it was dragged. Which is the correct the behavior.
With Preview or iPhoto this adaptation does not happen and the image is displayed with the right profile only on one of the 2 display. Besides being a very annoying issue, the very strange thing is how you can choose on which one of the displays the image gets displayed with the right display color profile:
- With Preview, the display color profile used (for both displays) is selected based on which is the default display in ColorSync display settings.
- With iPhoto, the display color profile used (for both displays) is selected based on which display the munu bar is (!!!). That is, if you want to have your image displayed with the right display profile on your cinema display, then you MUST have the menu bar on that display. If the menu bar is on the Macbook display the image on the cinema display will be displayed with the display profile of the Macbook display. Crazy!
You can try all of the above remembering that after any change you need to quit and reopen iphoto or preview or ColorSync for the settings to apply.
My question is: why neither iPhoto nor Preview act in the right way like Aperture or Adobe LG? Or at least, why iPhoto does not behave like Preview allowing me to choose where I want the menu bar without having this choice affecting the display color profile used to display my images?
Thank you,
MarcoWelcome to the Apple Discussions.
why iPhoto does not behave like Preview allowing me to choose where I want the menu bar without having this choice affecting the display color profile used to display my images?
Make a feature request at http://www.apple.com/feedback/iphoto.html
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
You are not allowed to continue because your account does not have the proper privileges
I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.
there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this: -
Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.
Update your HP Printer drivers/software at their website or uninstall using the developers method.
-
Hello:
I keep getting this message upon startup. Can't figure out how to address it. Here it is.
"/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
Any suggestions?There's an invisible one name "Icon" according to the error message.
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one. -
What to do when you encounter "does not have the proper security settings
What to do when you encounter: /Library/StartupItems/Qmaster" has not been started because it does not have the proper security settings. AND......../Startup Parameters.Plist ?
I have a PowerMac G5 using Operating system 10.6.8
I took this mac to the Apple store, they reset my os software and I have been having problems eversince. Since this Mac weights about 50 lbs, I don't want to take it in a gain. But - I am 67 years old and don't really understand some lingo - so straight english would really help.
I so appreciate any help I can get.>>I have no idea what all that means...
rwxrwxrwx root admin
It shows that the files are owned by 'root' & in the group 'admin', while being readable (r) , writeable (w) & executable (x) by user:root, group:admin and everyone else.
Startup items must be owned by root, the group must be wheel, and they must only be writeable by root.
You can't readily make the required changes via Finder, so you'll either need to reinstall the software that added them, remove (trash) them altogether (they start qmaster, used by fcp &/or compressor) or use Terminal & the 'sudo' command to alter the ownership & permissions.
If you choose the latter - run these two commands in Terminal while using an admin account, you'll be asked to enter the admin password, which won't be echoed onscreen. Restart afterwards. It's important that you copy/paste these exactly.
sudo chown -R root:wheel /Library/Startupitems
sudo chmod -R ugo+rwX,go-w /Library/Startupitems
However - your startup problems with the prohibited sign are unlikely to be resolved by this, although it should avoid the warning messages you describe.
When did the startup problems begin - after adding any new software or making other changes ?. -
I am running out of hard drive space so I clear 32GB of space at midnight and went to bed.
When I wokle up I had no space left even though I had not used the computer, the system.lg is FULL of stuff and I have no HD space anymore?
What's eating it up?WORD TO THE WISE
the OmniDiskSweeper was a very helpful download, because it laid out the HD and all the files on it in a "largest to smallest" fashion. When I did this I found that I had an inordinate amount of memory being taken up in my Mail Data folder, this did not make much sense so when I dug deeper I found that a 59MB scanned file that I had emailed 3 weeks ago had not been delivered, so the computer was retrying every minute and saving the history of what it was doing, so it was saving the 59MB file as well as the log about the 59MB file and hence for the last 3 weeks it's been chewing away at HD space recording the activity of the undeliverable file.
I deleted the Data record folders and removed the yahoo account from My Mail and reinstalled it with proper IMAP information and the HD is secure and holding at 331GB of free space. Like it ought to be.
I love the fact that if something very strange is happpening on your MAC there is a REASON....find it and fix it, and move on. In the PC world you would reboot 20 times, call some guy in India who will ony try to sell you a new subscription or warranty for $99 and never solve anything.
I am at rest once more, thanks for the tip -
How to I get a link with a "Mail to" address to open up a Compose window in my Yahoo mail, rather than in the Mail progrom on my Mac. I do not use the Mac Mail program.
== This happened ==
Not sure how often
== alwaysThank you, "the-edmeister" -- You render a great service, one that lifts my spirits.
Your answer also taught me to be a little more persistent, as I had started looking at Preferences, and just didn't notice the icons (including Applications) at the top of that window that would have led me to my answer.
Dave -
i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer. is this related to not having the proper itunes version vs ios? I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...any ideas what's wrong?
Hi Dennis!
I have a couple of steps for you to try in order to get those songs transferred to your iPod touch. First, make sure all of your software is updated with the latest versions. If the songs were downloaded from iTunes, you will also want to delete the songs from your library and then download them again from the list of past purchases on your iTunes account. An article about doing that can be found here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you try a sync after those two steps and are still seeing the issue, then I would like you to try syncing the iPod by setting it to manually manage. An article outlining more information on manually managing your iPod sync can be found here:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
If you are still having issues after that, I have another article that can outline some other reasons why your songs may not transfer to your iPod, and it can be found here:
Some songs in iTunes won't copy to iPod
http://support.apple.com/kb/TS1420
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
The application does not use the screen and run in the background
Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
private SSGameCanvas gameCanvas ;
private Command exitCommand ;
private Player player = null;
public void startApp() {
try {
// create new game thread
gameCanvas = new SSGameCanvas();
gameCanvas.start(); // start game thread
exitCommand = new Command("Exit",Command.EXIT,1);
gameCanvas.addCommand(exitCommand);
gameCanvas.setCommandListener(this);
Display.getDisplay(this).setCurrent(gameCanvas);
catch (java.io.IOException e)
e.printStackTrace();
try {
// start sounds
InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
player = Manager.createPlayer(in,"audio/x-wav");
player.setLoopCount(1);
player.start();
catch (MediaException ex)
ex.printStackTrace();
catch (IOException ex)
ex.printStackTrace();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
if (player != null) {
player.close();
System.gc();
public void commandAction(Command command, Displayable displayable) {
if (command == exitCommand)
destroyApp(true);
notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
protected GameManager gameManager;
protected boolean running;
private int tick=0;
private static int WIDTH;
private static int HEIGHT;
private int mDelay = 20;
Form mainForm;
Display display;
//private int MaxTime;
public SSGameCanvas() throws IOException{
super(true);
gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
public void start() {
this.running = true;
Thread t = new Thread(this);
t.start();
public void stop() {
running = false;
public void render(Graphics g) {
WIDTH = getWidth();
HEIGHT = getHeight();
// Clear the Canvas.
g.setColor(0, 0, 50);
g.fillRect(0,0,WIDTH-1,HEIGHT-1);
// draw border
g.setColor(200,0,0);
g.drawRect(0,0,WIDTH-1,HEIGHT-1);
// draw game canvas
gameManager.paint(g);
public void run() {
while (running) {
// draw graphics
render(getGraphics());
// advance to next graphics
advance(tick++);
// display
flushGraphics();
try { Thread.sleep(mDelay); }
catch (InterruptedException ie) {}
public void advance(int ticks) {
// advance to next game canvas
gameManager.advance(ticks);
this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PMHi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj -
In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations. What I can do? Help ………
IT NOT WORK IN MEXICO. THANKS A LOT. BEST REGARDS. MANUEL LOPEZ
El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
You received a reply
SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?
Correct Answer Helpful Answer
Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to SGIII, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support -
How to print pdf file not using the the adobe reader ?
hello,
i used the adobe sdk to open a pdf file in read and modify it serveral times and each time save it to another directory,and now i need to write a program to print the pdf file in this directory.when print the file,i want to continue my work also,so who i tell me how to solve this problem?
thanks.The SDK is only a collection of documentation and headers that show you how to interact with and automate Adobe Acrobat and to some extent Adobe Reader. You need a copy of Acrobat or Reader installed on the system in order to use any of the SDK functions. You cannot "print not using the Adobe Reader", unless you have Adobe Acrobat installed on the system instead of Reader.
-
When I click the firefox icon it tells me that I have firefox 8.0.1.Under is written Firefox-is-up-to-date (shadow line) It also mentions that I use the release-update channel.
When i start firefox there is a warning that I do not use the latest versionThis - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained by Google.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same. -
iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening???
Any time you've changed anything in your billing, it does this once to very things.
Maybe you are looking for
-
Installed itunes on xp but when started I get 'Data Execution Prevention' message
Have downloaded iTunes to XP but when i start the program all I get is an error text box with Data Execution Prevention message. We are running Firefox with AVG Anti Virus if this helps? Thanks SD
-
Hello Gurus My client has the following scenario: sometimes, Inv are posted even before the GR is posted ( Inv posted to block) then the Block release program is run at a certain interval of time to release the Inv block. My client wants those Invoic
-
Some users can't see whiteboards
So here's a weird problem. Only some users in my meeting rooms can see the whiteboards. I've tried clearing the cache, cookies, Flash cookies, etc, but that doesn't resolve the problem. This has happened to me twice today. I'm running Adobe Connect 8
-
Hello We are developing a website for a client and are constantly reviewing our progress using Safari. A year or so ago we updated 2 of our iMacs from Safari 5.1.7 to the next version and all of a sudden images on the web pages were offset. It was as
-
Associating Application Icons with Files
I just moved about a Gigs worth of files over from my G4 to my Wallstreet. The .pdf files do not obtain the Adobe Acrobat Reader icon until I actually open the file. Is there a way to change all the files icons at once without opening them all?