Subreport doesn't funciton a report is transferred from VS2008 to VS2010

Hi all,
we authorizi reports in vs2008 and save it in a vs2010 project since our corperate doesn't support the crystal version inside vs2010. Anyway, the sub report is empty when it should be displayed inside the main report.
thank you very much,
Clara

Clara, I'm not sure I understand...
What version are the CR assemblies referenced in your VS2010 project?
- Ludek

Similar Messages

Itunes doesn't sync music that was transferred from an external hard drive

I transferred a song from an external hard drive onto itunes on my laptop. The song plays through itunes on my laptop after I've disconnected the external hard drive, but it won't sync the song to my iPhone. I have a lot of music on that ext. HD and I'd like to listen to it on my iPhone.

Hi, Alex 58.
Thank you for visiting Apple Support Communities.
Try opening iTunes with the external drive connected and sync the music over to the iPhone. If all media is located on the external drive, iTunes will not sync the requested media to the device without the drive connected. You may need to remove the sync music preference and reapply it for the media to transfer.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
Cheers,
Jason H.

It doesn't look like my contacts transferred from my other accounts, how do I retireve them?

I just created a Mozilla Thunderbird account and moved my emails from two separate accounts ( msn & GoDaddy ). However, it does not appear that my contacts have also transferred. How do I move them without having to retype each contact?

For each of the accounts, export your contacts to a file. There are two formats: LDIF and CSV. TB can accept either, but LDIF is preferable. So once you have the contact files you can import them to your TB address book.

I having problem migrating reports of RDLC from vs2008 to vs2013

Error Message
Report execution in the current AppDomain requires Code Access Security policy, which is off by default
in .NET 4.0 and later. Enable legacy CAS policy or execute the report in the sandbox AppDomain
Please guide me step by step so that I can resolve this error as earliest as possible
I have even referred the link
https://social.technet.microsoft.com/Forums/en-US/b4d3ea19-bb1c-45e9-9fdc-25dfbc2bbdbe/custom-assembly-in-report-viewer-with-net-framework-4?forum=vsreportcontrols
As of now I am not able to resolve it Kindly oblige and help me in resolving this error

Hi A Jarrett,
Thanks for your reply.
I sugegst you will need to check if if
these files can be created in VS2013.
Since the VS2008 is really old version, and generally we open an old project with the closed VS version, for example, I sugegst you could check whether you could open all files in VS2010, and then test it with VS2013.
In addition, I suggest you can try to open the your project solution using File | Open Project... and then pass the path to the solution project file check this issue again.
I find a similar thread about how to convert project from old version VS to VS2013, you can try the jsck's suggestion to check your issue.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/3d128a21-f3b5-430e-b146-60eea577194f/converting-vs-2005-project-to-vs-2013?forum=visualstudiogeneral
Best Reagrds,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Report on transferred calls

I need to report on transferred calls. Agents are using standard CAD and selecting the transfer icon. Within the transfer form, they use the softphone to dial various 800 numbers. I need to create a report that I can group by 800 numbers called using the CAD transfer option. Does this come from the call manager? We recently implemented CVP. Are there any CVP reports that would provide this information?

Hi Ryan
I'm afraid there isn't one - only the CSQ Activity reports and the CSQ Service Level Priority Summary reports seem to show the service level info, and those are summary reports rather than reports that show call lists.
You would need to get a custom report put together for this... it's an Informix SQL procedure-writing and Crystal Reports exercise to do that.
Regards
Aaron

Issues once subreport is added to main report.

Another question from a new Crystal Reports Developer. I have been battling this one for multiple days. I have built two seperate reports through Crystal Reports that pull their data through an ODBC connection from Remedy ITSM. One report is pulling data through the table AST_AssetPeople. It is pulling the following fields: Asset_ID and Full_Name. The other report is pulling data from the AST_ComputerSystem table showing the following: Name, Category, Type, Item, Model_Number, Serial_Number. I am using the AssetPeople report as the main and the ComputerSystem report as the subreport. When I pull the ComputerSystems report into the AssetPeople report as a subreport, my CR lags very badly. I let CR attempt to pull the data for about 2 hours before I left work the other day and ended up having to leave it overnight. When I came back to work the following day it had finally completed and I was able to view all pages of data. This is with the subreport being added to the details section of my main report. I had sent it to someone else at work that has Crystal Reports on their PC and they were able to run it just fine and it only took a few minutes to get all pages of the data back and viewable. That lead me to think that it was my PC, but when I went over to the other persons PC and logged in with my profile, I had the same problem that I had on my PC. This leads me to believe that it is an issue with the settings. The other person is out for the next week so I cannot verify that my settings match his, so I was wondering if anyone on here might have an idea what may be causing the issues that I am having. Both reports run just fine on their own, as do all my other reports that are simple reports from one table. It is just when I try to pull in a subreport that I have this issue. Any help would be greatly appreciated.

I have gone in and checked the box next to Perform Grouping on Server. The check box next to Use Index or Servers for Speed was already checked. The Links for the subreport are set up as follows.
For subreport: Supported vs. Unsupported (This one comes from the ComputerSystem table)
Container Report fields to link to: AST_AssetPeople.Asset_ID
AS_AssetPeople.Asset_ID field link-
Subreport parameter field to use: ?Pm-AST_AssetPeople.Asset_ID_
Select data in subreport based on field: AST_ComputerSystem.Asset_ID_
Asset ID is the only field that I found that the two tables have in common. I believe that I have the links set up correctly, but I could be wrong.
Either way, I am still having the same problems.

Multiple subreports within a single main report?

I'm a newbie to BI Publisher, but have used Crystal Reports quite a lot.
I have a requirement which essentially consists of a set of 7 similar and closely related reports, each using a different SQL Select statement and printing different columns; the user will have the option of selecting either one of the 7, or all of them.
In Crystal Reports I would set up 7 subreports within a single main report, and depending on the parameter, suppress those subreports which are not required.
Is there a technique within BI Publisher which would enable me to achieve the same thing?

all the sub templates will go against a single XML. So if your sub reports in CR is handling different query, you need to take a step back and think of separating data and layout. So multiple queries will be handled by data templates. So, for example, if your main report fetches some records as Q1 query, and you have two sub templates with queries as SQ1, SQ2 (linked subreport). Then we have to see what relationship exists between the main report and the subreport. Say, the sub report query creates a relationship with the Main report data, to filter certain records. So this can be achieved in data template using Q1 and SQ1 using bind relationship, ie, Q1 is master query and SQ1 is a detail query. Similarly Q1 and SQ2 relationship can be established. The datatemplate when executed, will fetch a single XML data.So in this case you do not need sub template. The sub-report layout is not separate, and is to be created with the main report.
In case of unlinked subreport, the content of subreport is independent of main report, so you can simply define two datasets in BI Publisher and then select the Concatenation option. So the final XML data will be a concatenation of two XML data. The main report can read data of the main XML and the sub template can read data from the appended XML data. This can be done using xPath.

CUIC Reporting - Calls Transferred

Hey Guys,
I need to create a report to show how many calls were transferred from an agent, and to what destinations.
I've read the CUIC doesnt tap into the right database to collect this type of information, is this correct?
If anyone could shed some light on how to configure another database source or where to go to configure such a report..
Thanks
Ben

Bump?
I know it's an old thread, but I've got the same issue.
UCCX 9
CUCM 9
CSQ calls get transferred by an agent to a non-agent destination and I'm being asked to provide reports on how many calls were transferred to which extension, and preferably including which agent transferred the call.
-Mike

Should I uninstall the adobe I have on my new computer that was transfered from my old computer(it doesn't work)?

Should I uninstall the adobe I have on my new computer that was transfered from my old computer(it doesn't work)?

Svena1 yes please run the uninstallers to remove the software and reinstall the software. Which Adobe software or service are you trying to reinstall? Also which operating system are you using?

Datawarehouse query detail report result doesn't match summary report.

Hello,
In our DW, we run a detail report query ( like below No. 1) , while in the summary report, in which the query is partially based on aggregated table T_AGG_UNC_GROSS (like below No.2), the query result doesn' match the query result of the details report. (supposed to match exactly)
To pick out the problem why summary report (like below NO.3) doesn't match details report. I put two filters in the details query with the filter is "year 2007", filter location is "California")
I can get 295 selected.
while I put above two filters in summary report, get no row selected.
I suspect aggregation table has some problem (wrong aggregated).
Is there any method I can pick out the problem behind?
thanks a lot in advance.
--1.detail report
select D1.c14 as c1,
D1.c13 as c2,
D1.c12 as c3,
D1.c11 as c4,
D1.c10 as c5,
D1.c15 as c6,
D1.c9 as c7,
D1.c8 as c8,
D1.c7 as c9,
D1.c6 as c10,
D1.c5 as c11,
D1.c16 as c12,
D1.c17 as c13,
D1.c18 as c14,
D1.c19 as c15,
D1.c4 as c16,
D1.c3 as c17,
D1.c20 as c18,
D1.c2 as c19,
D1.c21 as c20,
D1.c22 as c21,
D1.c1 as c22
from
(select /*+ full(T278878) full(T144662) full(T144546) full(T144557) full(T144665) full(T155155) */ sum(T144442.FINAL_BILL_AMOUNT) as c1,
sum(T144400.WRITE_OFF_AMOUNT) as c2,
case when T144416.FMCI_IND = 'Y' then 'Yes-fMCI' else 'No-fMCI' end as c3,
T144442.IS_FIOS_FLAG as c4,
T314105.DATE_DESC as c5,
T144442.CYCLES_DELINQUENT as c6,
T144590.DATE_DESC as c7,
T144564.DATE_DESC as c8,
T144557.LOB_CODE as c9,
case when T144442.IS_NEVER_PAY_FLAG = 1 then 'Yes-NP' else 'No-NP' end as c10,
T144416.CLASS_OF_SERVICE as c11,
T144416.ACCOUNT_NAME as c12,
T144416.BTN as c13,
T144416.ACCOUNT_NUMBER as c14,
T144634.ACCOUNT_STATUS as c15,
T144687.CSG_ID as c16,
T441666.DISCONNECT_REASON_DESC as c17,
T144612.LOB_CODE as c18,
T144612.STATE_CODE as c19,
T144640.DATE_DESC as c20,
T144586.PRIMARY_CIC_CATEGORY as c21,
T144586.SECONDARY_CIC_DESC as c22
from
V_D_STATE T144612 /* V_D_STATE_UNCGRO */ ,
D_DISCONNECT_REASON T441666 /* D_DISCONNECT_REASON_UNCG */ ,
D_CUSTOMER_SERVICES_GROUP T144687 /* D_CUSTOMER_SERVICES_GROUP_UNCGRO */ ,
V_D_ACCOUNT_STATUS_FINAL T144634 /* V_D_ACCOUNT_STATUS_UNCGRO */ ,
D_DATE T144640 /* D_DATE_UNCGRO */ ,
V_D_CARRIER_CODES T144586 /* V_D_CARRIER_CODES_UNCGRO */ ,
F_UNCOLLECTIBLES T144400 /* F_UNCOLLECTIBLES_UNCGRO */ ,
D_ACCOUNT T144416 /* D_ACCOUNT_UNCGRO */ ,
D_ACCOUNT_DETAIL T144442 /* D_ACCOUNT_DETAIL_UNCGRO */ ,
D_LINE_OF_BUSINESS T144557 /* D_LINE_OF_BUSINESS_UNCGRO */ ,
D_DATE T144564 /* D_DATE_UNCGRO_CONNECT */ ,
D_DATE T144590 /* D_DATE_UNCGRO_FINAL */ ,
D_DATE T314105 /* D_DATE_UNCGRO_DISCONNECT */
where ( T144400.ORGANIZATION_ID = T144612.ORGANIZATION_ID and T144416.ACCOUNT_STATUS_ID = T144634.ACCOUNT_STATUS_ID and T144400.WRITE_OFF_DATE = T144640.DATE_ID and T144400.CIC_CODE_ID = T144586.CIC_CODE_ID and T144416.CUSTOMER_SERVICE_GROUP = T144687.CSG_CD and T144400.ACCOUNT_ID = T144442.ACCOUNT_ID and T144400.ACCOUNT_ID = T144416.ACCOUNT_ID and T144400.DISCONNECT_DATE = T314105.DATE_ID and T144400.WRITEOFF_REFERRAL_IND = 'WRO' and T144416.DISCONNECT_REASON = T441666.DISCONNECT_REASON and T144612.U_STATE_DESC = 'California - BUSINESS' and T144640.YEAR_DESC = 'Year 2007' and T441666.DISCONNECT_REASON_DESC <> 'G' and T144416.FINAL_BILL_DATE = T144590.DATE_ID and T144416.CONNECTION_DATE = T144564.DATE_ID and T144416.LOB_ID = T144557.LOB_ID and T441666.DISCONNECT_REASON_DESC <> 'H' )
group by T144416.ACCOUNT_NAME, T144416.ACCOUNT_NUMBER, T144416.BTN, T144416.CLASS_OF_SERVICE, T144442.IS_FIOS_FLAG, T144442.CYCLES_DELINQUENT, T144557.LOB_CODE, T144564.DATE_DESC, T144586.PRIMARY_CIC_CATEGORY, T144586.SECONDARY_CIC_DESC, T144590.DATE_DESC, T144612.LOB_CODE, T144612.STATE_CODE, T144634.ACCOUNT_STATUS, T144640.DATE_DESC, T144687.CSG_ID, T314105.DATE_DESC, T441666.DISCONNECT_REASON_DESC, case when T144416.FMCI_IND = 'Y' then 'Yes-fMCI' else 'No-fMCI' end , case when T144442.IS_NEVER_PAY_FLAG = 1 then 'Yes-NP' else 'No-NP' end
) D1;
295 rows selected.
--2. aggregation table T_AGG_UNC_GROSS
create table T_AGG_UNC_GROSS parallel nologging as
SELECT a.account_id,a.ORGANIZATION_ID,a.UNC_LOB_ID,
MAX (a.WRITEOFF_REFERRAL_IND) AS WRITEOFF_REFERRAL_IND,
MAX (a.WRITE_OFF_DATE) AS WRITE_OFF_DATE,
COUNT (1) AS NO_OF_UNC,
MAX(a.DISCONNECT_DATE) as DISCONNECT_DATE,
sum(a.WRITE_OFF_AMOUNT) as WRITE_OFF_AMOUNT
FROM f_uncollectibles a
GROUP BY a.account_id,a.ORGANIZATION_ID,a.UNC_LOB_ID;
---3. sumarry resport (query)
select SUBSTR (f.WRITE_OFF_DATE, 5, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 7, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 0, 4)
writeoff_date,
'ALL CIC',
o.U_STATE_DESC,
s.U_ACCOUNT_STATUS,
rl.RISK_LEVEL,
d.Amount_Range_ID || ' - WR',
f.WRITEOFF_REFERRAL_IND,
fi.fios_flag_desc,
DR.DISCONNECT_REASON || '-' || DR.DISCONNECT_REASON_DESC,
b.BEHAVIOR_SCORE || ' - B',
cs.csg_cd || ' - CG',
CASE WHEN d.IS_NEVER_PAY_FLAG = 1 THEN 'Yes-NP' ELSE 'No-NP' END
AS Neverpay_Ind,
CASE WHEN u.FMCI_IND = 'Y' THEN 'Yes-fMCI' ELSE 'No-fMCI' END
AS FMCI_IND,
lob.DESCRIPTION,
COUNT (f.Account_id) No_of_Accounts,
SUM (d.NO_DENIAL_NOTICES) NO_DENIAL_NOTICES,
SUM (d.CYCLES_DELINQUENT) CYCLES_DELINQUENT,
sum(f.WRITE_OFF_AMOUNT) WRITE_OFF_AMOUNT ,
sum(d.FINAL_BILL_AMOUNT) FINAL_BILL_AMOUNT
FROM t_agg_unc_gross f,
d_account u,
d_account_detail d,
D_DISCONNECT_REASON DR,
d_writeoff_amount_range a,
v_d_account_status_final s,
D_BEHAVIOR_RANGE b,
v_d_state o,
d_Fios_Indicator fi,
d_risk_level rl,
d_customer_services_group cs,
D_UNCOLLECTIBELS_LOB lob,
D_DATE
WHERE f.account_id = u.account_id
AND u.account_id = d.account_id
AND d.Amount_Range_ID = a.wo_range_id
AND d.IS_FIOS_FLAG = fi.FIOS_FLAG
AND u.Account_Status_ID = S.ACCOUNT_STATUS_ID
AND u.RISK_LEVEL_ID = rl.risk_level_id
AND o.organization_id = f.organization_id
AND dr.DISCONNECT_REASON = u.DISCONNECT_REASON
AND d.BEHAVIOR_SCORE12 = b.BEHAVIOR_SCORE
AND u.CUSTOMER_SERVICE_GROUP = cs.csg_cd
AND Dr.disconnect_reason NOT IN ('H', 'G')
AND lob.LOB_UNC_ID =f.UNC_LOB_ID
AND o.U_STATE_DESC = 'California - BUSINESS'
AND D_DATE.YEAR_DESC = 'Year 2007'
and u.FINAL_BILL_DATE = D_DATE.DATE_ID
--and u.CONNECTION_DATE = D_DATE.DATE_ID
GROUP BY SUBSTR (f.WRITE_OFF_DATE, 5, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 7, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 0, 4),
'ALL CIC',
o.U_STATE_DESC,
s.U_ACCOUNT_STATUS,
rl.RISK_LEVEL,
d.Amount_Range_ID || ' - WR',
f.WRITEOFF_REFERRAL_IND,
fi.fios_flag_desc,
DR.DISCONNECT_REASON || '-' || DR.DISCONNECT_REASON_DESC,
b.BEHAVIOR_SCORE || ' - B',
cs.csg_cd || ' - CG',
lob.DESCRIPTION,
CASE WHEN d.IS_NEVER_PAY_FLAG = 1 THEN 'Yes-NP' ELSE 'No-NP' END,
CASE WHEN u.FMCI_IND = 'Y' THEN 'Yes-fMCI' ELSE 'No-fMCI' END;
no row selected.
Edited by: ROY123 on Jul 23, 2010 12:17 PM

fixed.

T.code FEBC: the repport list doesn't contain the report RFEBIT00

Hi All,
when I launch the t.code FEBC, SAP provides me a list of report among which I've to choose the one I need.
But the list doesn't contain the report RFEBIT00..... How to add it to the list?
Thanks
Gandalf

Hi,
Please do coordinate with your technical consultant(ABAP) for the reolution.

My ipod nano doesn't accept transfers from overdrive with new windows 8.1

my ipod nano won't accept audio transfers from overdrive using a new windows 8.1 computer.

Hello lyndd, We discovered your issue on the forum, and are providing this article to help you resolve the issue. You can also find many other useful articles and videos at help.overdrive.com. With the limited information, contacting support by clicking on Help from the library site and providing full details about the issue will help to get the issue resolved for you.
OverDrive Support Services

In photos: I have tried to select and delete some duplicate pictures that I transferred from my other iPhone 5S on this new iPhone 5S and when I select the only options available is moving the photos or email/text. I cannot put in trash bin

iPhone 5s photos/video,deleting duplicate photos and video transferred from other iPhone 5s & iPhone 4S
I have tried selecting photos and videos to throw them in trash bin, but the trash bin doesn't work when pressing and or clicking on it
I would like to know how to get rid of the unwanted and duplicate pictures that I've transferred from my other iPhones.
If someone could please help me, I would greatly appreciate it !!
Thank you so much,
Ginger

How did you transfer the photos from your other iPhone? If you did it by importing them from the old phone to a computer and then used iTunes to sync them back to the new phone, then you would delete them by syncing again using iTunes but this time change the selection of which photos are to be synced. Each time you sync using iTunes, it sets the non-Camera Roll photos on the phone to match the current settings/selection in iTunes.

The Domains.site2 file transferred from another mac won't open in iweb

Just transfered a Domains.site2 file from one mac to another in the applications support/iweb folder. But when I open iweb I get the error: can't read Domains.site2 file. Any thoughts on why this might be? It's a large file - over 2 gigs, transferred from an iMac running OX 10.5 to a macbook running OX 10.6
Thanks!

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Is there any way to get all my stuff transfered from my old broken iphone to a new one

is there any way to get all my stuff transfered from my old broken iphone to a new one

Guess you have your answer. Maybe next time you'll read the User Guide and use the phone as recommended so this doesn't happen again.

Subreport doesn't funciton a report is transferred from VS2008 to VS2010

Similar Messages

Maybe you are looking for