Subreport header on more than one page ?

Hi all, I need to create some reports with big subreport inside ! Main report subreport1 (10 pages and 9 columns)subreport2 (15 pages and 3 columns)etc... My problem is when I go on page 2 I do not have the subreports PageHeader nor the subreport PageFooter ?These subreport header and footer are different for each subreports I have. In fact if you look in the subreport the page header is replace by a report header !!! a) Is it an option to activate the subreport header and footer on a new page ?b) Is it possible to prevent the subreport "page header" section to be renamed into "report header" ? c) Is there a way to display more than one report at the same time with 1 CrystalViewer (without subreport)

If someone encounter the same problem : I found this : http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2005103&sliceId=&dialogID=10086025&stateId=1%200%2010082919 This solution help me creating fake header ...Do I have to use it ? (it means modify all the reports) Or is there another solution ? --> For the footer the same method exist but need a fix number of lines per page and no can grow option. This is not possible for me ! Any idee ? Thanks

Similar Messages

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

Why can't I paste more than one page at a time?

I have a problem with Pages when I try to paste more than one page worth of content at one time.
In my business I have a form online for clients to fill out. When the clients have finished the form, I copy the form (saved either as a safari document or as a pdf) and then try to paste what I have into Pages. It should flow to fill out four pages, but for some odd reason it only fill the first page of a Pages document, then it gives me a second blank (empty) page. So the document is two pages long, but only the first page has content.
I know the pasted information is hidden in the document, because if I were to cut (erase) a few lines of content, the pasted information would appear from the bottom of the page to fill the space I just made.
Why is Pages not making a four page document containing all my pasted information? Why isn't it flowing to fill out as many pages as it takes to show all the information?

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to use beans in more than one page

hello members,
can somebody tell me how to make beans availabe to more than one page ,i used scope variable as "application"
in which i set the value of java bean and in that page it show all values of that bean even it modified
but when redirect to another jsp page it does not show modifided value,it shows its default value
what shld i use tell me
following thing that i use in forwarded jsp page
<jsp:useBean="same id in previous jsp page", class="same class", scope="application"/>
and then i am using boolean variable which set false default ,but i set it manually though
setfuction (assume) in original jsp page,but in redirected page it showing it value fasle
i don't know why
can somebody (Bean Bond) help me in this problem
i will very thankfull to you
plz..................

My dear friend,
your scope is wrong. Since you run a JSP page and you want it available everywhere, the only thing that all pages have common is session. So changing your bean scope to session will keep the bean variables and the rest you have on it.
Try it and let me know.

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

How to use more than one page to design a form-like report???

Hi
I am designing a form-like report. and widening the repeating frame to contain all the page or the window like this page:
Image: !http://up1.m5zn.com/photo/2008/12/21/07/e728mos12.jpg/jpg!
Now there is no space at the window to complete designing the report!
How to make the repeating frame to contain more than one page or one window to complete designing the report?

change Vertical Panels per Page to 2 (or more as needed) for the Main Section of Layout Model.

How to go back more than one page at a time?

I'm pretty sure there used to be a drop-down arrow by the back/fwd buttons, so you could go back more than one page by selecting it. Yeah? Where did it go?

You can either right-click on the back/forward buttons or hold down the left mouse button until the list appears.

How do you fax more than one page at a time?

How do you fax more than one page using the phone?

Hello @spirittoo,
I am not quite sure what you mean.
Are you using a third party app to send faxes from a cell phone?
In case you are having an actual fax issue, I have included the following links.
Send a Fax from the Scanner Glass or the Automatic Document Feeder
Fax Sending Fails Intermittently or Fails for Only One Recipient
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Is it possible to add more than one page at a time in pages - word processing?

Is it possible to add more than one page at a time in pages - word processing?

I haven't been able to find a way to add more than one page at a time. I think you'll have to add them one at a time.

How can I have more than one page open at a time?

I would like to have more than one page open at a time- not tabs, but whole pages. How can I do this? I want to be able to have the pages side by side, instead of having to switch back and forth.

Fox Splitter (formerly Split Browser): https://addons.mozilla.org/firefox/addon/4287

Cannot work on more than one page and menu shifting problems

I downloaded Muse CC 2014 when it first came out, and now I find myself no longer able to edit more than one page without having to completely shut down the application and start it again. Here's what happens:
I open a page to edit, and then anything else I try to double click on (or right click and choose open page) does absolutely nothing. Any ideas why this is occurring?
Also, I've noticed a strange phenomenon where my menu has completely shifted its menu contents - pushing everything down. Nothing I did - wondering why this is happening. This has pretty much rendered Muse unusable to me and I am becoming more and more frustrated since I'm paying good money for this....please help.
Here's a screenshot of the messed up menu (all text should be located in between the green dots and not so spread out):
Also, if I try to create a border around a text box with just the bottom border showing (i.e. the other 3 sides are set to 0), that bottom border also shifts down as if the text container has suddenly expanded.
This happens with both my Macbook Air and my MacPro.
Thanks in advance for any help. I'm kind of at my wit's end....I really need to be able to update my website as this is the face of my business.
-Kristine

You could look at using a template. Create your master template, create editable and non-editable regions, then use this template create all the child pages. When you need to make a change to the menu, make it in the template and the changes will flow down to all the pages created from the template.
Using DW Templates:
http://www.adobe.com/devnet/dreamweaver/templates.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_templates.html
The other option would be to create the Navigation item as a server side include...
More about this:
http://kb2.adobe.com/cps/143/tn_14380.html
http://www.entheosweb.com/website_design/server_side_includes.asp
Difference between using a template and server side includes.
When you make a change to a template, you need to re-upload all the pages created from the template.
Using a SSI, you make the change in the ssi file, upload it and all pages are automatically updated.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

Why can't I print more than one page?

I'm pring a lafge text:
<af:inputText id="it1" value="#{main_bean.resp}" readOnly="true"
simple="true" rows="#{main_bean.kvitRows}" styleClass="AFStretchWidth"
visible="true"/>
That is I use one af:inputText with many rows.
To send it for pring I use JavaScript.
<af:resource type="javascript" >
function printPage(evt){
window.print();
evt.cancel();
window.close();
</af:resource>
When printing it clips the text. If the text is more than one page it print only one page. I need to continue printing on the next pages (not to clip). When printing othe web-pages it distributes it onto several paper pages.

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Can I open more than one Pages document at a time with the IOS app?

This sounds crazy, but I can't find how to open more than one Pages document at the same time when using the Pages app on IOS.
It's easy on the Mac, but on my iPad? Can't seem to do it!
I'm working on a project where I'm writing one document, but having to frequently cross-refer to another. Having to continually open and close each document, one at a time, on my iPad is driving me mad!
Am I missing something really obvious? Can anyone help please?

Many thanks, that's really useful. I've saved the document I'm referring to as a PDF and can now work exactly as you described.
As you say, it's not elegant, but it does work
Just need to ensure my fingertips are very dry, as I fear any slight 'catching' with a four finger swipe and my iPad will fly across the room / train / office

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

When I read a pdf document using Safari I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

When I read a pdf document using Safari on my IPad I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

Hi snoreaustralia,
It sounds like you just need to associate the PDF filename extension with Acrobat, rather than Preview. Please see this document from the Microsoft Help for instructions on choosing the default program for opening a particular file type (in your case, PDF): Change which programs Windows uses by default - Windows Help
Best,
Sara

Subreport header on more than one page ?

Similar Messages

Maybe you are looking for