Subreports with variable heights

How do you get subreports to print one after the other when
the height of each subreport varies? Each subreport appears on the
page in an absolute position.

Found the answer in the help file in the Properties reference
section:
Position Type: = Float - The element moves down as elements
above it expand. It attempts to preserve the distance between it
and elements above it.

Similar Messages

Accordion with variable height

Hi -
I have a 2-panel accordion with variable heights, and spry
data in both the top and bottom panels. Selections made in the top
panel will load data into the bottom panel, and the page opens to
the top panel by default. My problem is that the bottom panel will
only display enough height to show the initial HTML markup, and not
the spry data generated after the initial page load. Is there any
way to use an observer to "refresh" the accordion to reset its
height to accommodate the new data?
Also, is there a way to require that at least one panel
remain open when using variable heights?
Thanks in advance,
Rod

Hi,
We have a similar question on this
post.
To fit exactly with your request you should change the line:
regionHeight =
document.getElementById("myRegion").scrollHeight;
with:
document.getElementById("myRegion").style.height =
document.getElementById("myRegion").scrollHeight + 'px';
Diana

Tabular report with variable-height 2nd line?

I have a simple tabular (Tablix) report. The last field is a message (varchar(1000)) which I would like to place by itself on a second line (while still preserving the tabular format), with variable height.
The problem is, when I add a second row to the detail region, I can add the message field, but it is limited to the size of the field just above it. I'm trying to allow that message field to take almost the entire width of the second detail line. Can
this be done?
Thanks.

If you add a row inside the Details group, then select all cells inside the details group that are on the new row, you should be able to merge cells by right-clicking and choosing merge cells.
You cannot merge cells across different scopes (row groups, column groups, etc) so be certain that you are not selecting cells that span different groups.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Start with all Accordion panels closed with variable height panels

I inserted a Spry Accordion on this page: http://www.brucebarrdesign.com/video_new.htm
I want the panels to open to a size depending upon the content within them so I set the height to auto. The problem is that when you go to the page, the first panel is open. I want all of the panels to be closed when you first go to the page. Per the Help docs and some posts I've seen in the forum, I tried inserting this code:
<script type="text/javascript">
var acc1 = new Spry.Widget.Accordion("Acc1", { useFixedPanelHeights: false, defaultPanel: -1 });
</script>
However, this only works with fixed height panels. If I use it with the variable height, it opens all of them, so I commented it out for now. How can I get this to work?
Thanks

GPDMTR25 wrote:
I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
<script type="test/javascript">
var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
</script>
Angela
Hi Angela,
You are right, the only way it will work is by setting the fixed height to false. As for the for the default panel option, -1 is not a panel and if you had 3 panels we could have used the number 3 (panel1 = 0) or 99 or whatever as long as there is no panel with that number. If we had used the number 1 for instance, then the 2nd panel would be opened by default.
Hope this helps.
Ben

TileList with variable height renderer example?

I am desperately searching for an example of how to implement
a TileList with a variable height renderer. Well I guess to be more
clear, I am sort of able to do this, but I have a renderer that
uses a VBox, then an mx:Image. My single column TileList will hold
a collection of images, that are all scaled to the same width. I
need the height of the renderer to be based on the scaled height of
the image.

Google "FlowBox".
Tracy

Keeping at Least One Accordion Panel Open with Variable Heights

Hi -
Is there a way to keep at least one panel open when using {
useFixedPanelHeights: false }?
Here's an example:
http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample.html#VariablePan elHeights
If panel 4 is open, and you click the panel 4 heading, it
closes and no
panel is open.
Thanks,
Rod

Sorry, I didn't read my full message regarding wanting only
one panel to open.
What I ended up doing was using a PHP conditional to display
a message if a certain variable was not passed in the URL. See my
post on the Friends of Ed forum. Scroll to the bottom for my
solution.
http://friendsofed.infopop.net/4/OpenTopic?a=tpc&s=989094322&f=5283032876&m=3461018571

MaxScale fixed with variable height?

I need to resize my image to have a width of 155px and the height automatically adjusted to scale.
e.g.
image 1: 300px(w)x100px(h) = 155px(w)x103px(h)
image 2: 100px(w)x300px(h) = 155px(w)x233px(h)
also I need to create a fixed 66px(w)×49px(h) thumbnail. The thumbnail needs keep its aspect ratio and crop it to 66x49.
Is the above possible?

As far as I can see, a JTextArea doesn't work if the lines wrap. I can add line wrapping to the JTextArea by setting jta.setLineWrap(true); but then the height of the window is wrong:
import java.awt.*;
import javax.swing.*;
class Xyzzy {
        private static JFrame frame;
        private static JComponent cPane; // Content pane
        public static void main(String[] args) throws Exception {
            SwingUtilities.invokeAndWait(new Runnable() {
                public void run() {
                    frame = new JFrame("XYZZY");
                    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                    cPane = (JComponent)frame.getContentPane();
                    cPane.setLayout(new BoxLayout(cPane, BoxLayout.Y_AXIS));
                    String str = "This is a text string which is to be repeated several times ";
                    JTextArea jta = new JTextArea();
                    jta.setEditable(false);
                    jta.setLineWrap(true);
                    for(int ii = 15; ii --> 0; ){
                        jta.append(str + str + str + str);
                        jta.append("\n");
                    cPane.add(jta);
                    frame.setMinimumSize(new Dimension(800, 0));
                    frame.pack();
                    frame.setLocationRelativeTo(null);
                    frame.setVisible(true);
Claus

Variable Heights Panels Accordion

I have an Accordion with variable heights panels .
Is it possible to have at least one panel always open as the
fixed height panel behaves.
At the moment if I click the open panel it closes.
My Test
Page Here
Thanks,
Richard

Hi Steven.
Could you please provide the URL of the page where we can check it.

Tabbed panel with adjustable/variable height based on content

Is there anyway that you can create a tabbed panel with adjustable/variable height based on content in each tab?

Abhishek,
Thanks for your reply, however, it is not working with Muse. I added the Javascript to the head section and adjusted iframe and it displays as a small square in the upper left hand corner, unable to view the whole page.
Inserted into head section --
<script type="text/javascript">
function resizeIframe(obj)
obj.style.height = 0;
obj.style.height = obj.contentWindow.document.body.scrollHeight + 'px';
</script>
inserted as an html object --
<iframe name="MycoSmooth" src="http://www.mycosmooth.com" frameborder="0" scrolling="no" id="iframe" onload='javascript:resizeIframe(this);' />
Below is the result:
The purpose is to have an independent website run the blogging capabilities, since muse doesn't directly support blogging as of yet.
Since the site is on a different domain, I am running into cross domain issues and it won't get the height of the page. The methods that apparently work use php and I am unsure how that would work in muse, if at all.

How to set the variable height for TileLayout

Hi,
I am using TileLayout in <s:List> component . TileLayout takes the maximum height of the children and draw the same height for rest of the children in all rows. Instead, I want to have all the rows with various heights if their children have different heights.
I know there is variable height property in <mx:List> component but which is not there in its spark counterpart. Can you please help me with this issue??
Thanks,
Bhoja

The spark TileLayout class lays out all of its elements in equally sized "cells". Cells of variable sizes is not currently supported.

Cell Offload will Happen for pl/sql Block with variables

Hello Experts,
i am working on procedures on exadata now. i was confused with cell offload in exadata. somehow offload is not happening when i ran the sql statement in in pl/sql block with variables.
here are my findings.
when i ran insert into from select with values at toad, my query response time is very good. the total process is completed in less than a minute.
i checked offload is happening.
same sql statement is placed in plsql block with variable, procedure is taking lot of time and it is not completing. this case offload is not happening.
is it true, if i use variables in pl/sql block will not use cell offload and smart scan?
if yes, what is the work around.
Thanks
#! Pavan

Hello Marc,
Thanks for quick response.
when i ran the query with literals in toad session i am getting response.
when i run it with pl/sql block , block is not completing at all.
here is the plsql block:
My Apologies for sending big code,with out proper format.
DECLARE
P_BUSINESS_DATE DATE;
P_BATCH_ID NUMBER;
UTC_OFFSET NUMBER;
BEGIN
P_BUSINESS_DATE := to_date('02/01/2012', 'MM/DD/YYYY');
P_BATCH_ID := 1;
UTC_OFFSET := 0;
INSERT /*+ APPEND */ INTO UPL_CLIENT_tbl
( reportdate,
LastName,
FirstName,
MiddleInitial,
AccountNumber,
Address,
City,
State,
Zip,
HomePhone,
WorkPhone,
BirthDate,
Age,
Sex,
NumberOfChildren,
Occupation,
LeadSource,
Consultant,
ProgramDirector,
CallTaker,
LeadDate,
FirstVisitDate,
LastVisitDate,
BillType,
ClientType,
PreviousClientType,
AppointmentDate,
DoctorLetterRequired,
OneYearPermStabilizationDate,
UnlimitedPermStabilizationDate,
MaritalStatus,
ReferrerName,
ReferrerCentreID,
CentreID,
PaymentDateOne,
PaymentAmountOne,
PaymentDateTwo,
PaymentAmountTwo,
PaymentDateThree,
PaymentAmountThree,
PaymentDateFour,
PaymentAmountFour,
LibraryPurchased,
BalanceDue,
FoodNSFBalance,
ProductNSFBalance,
ProgramNSFBalance,
StartWeight,
CurrentWeight,
GoalWeight,
Height,
DateGoalWeightAchieved,
DateSuccessPlusPurchased,
ReturnToActiveDate,
VersionNumber,
HalfWayDate,
LastLSCDate,
LastUpdatedDate,
VitaminWaiverSigned,
LastSupplementPurchaseDate,
LastSupplementCodePurchased,
LastTotalSupplementSupplyCycle,
LastAddtlSupplPurchaseDate,
LastAddtlSupplCodePurchased,
LastAddtlSupplSupplyCycle,
DiabetesClient,
DietControlled,
TakingOralMed,
TakingInsulin,
EmailId,
CTADate,
RWLDate,
Address2)
(SELECT /*+ full(S_CONTACT) full(REFERRER) full(Consultant) full(ProgramDirector) full(CallTaker) full(S_CONTACT_X) full(a) full(a2) full (a3) */ distinct p_business_date reportdate,
SUBSTR(S_CONTACT.LAST_NAME,1,25) AS LastName,
SUBSTR(S_CONTACT.FST_NAME,1,25) AS FirstName,
SUBSTR(S_CONTACT.MID_NAME,1,1) AS MiddleInitial,
S_CONTACT.X_JC_ACNT_NUM + 900000000 AS AccountNumber,
SUBSTR(S_ADDR_PER.ADDR,1,40) AS ADDRESS,
SUBSTR(S_ADDR_PER.CITY,1,20) AS City,
S_ADDR_PER.STATE AS State,
SUBSTR(S_ADDR_PER.ZIPCODE,1,15) AS Zip,
SUBSTR(REPLACE(S_CONTACT.HOME_PH_NUM,'-',''),1,10) AS HomePhone,
SUBSTR(REPLACE(S_CONTACT.WORK_PH_NUM,'-',''),1,10) AS WorkPhone,
S_CONTACT.BIRTH_DT AS BirthDate,
CASE WHEN FLOOR((p_business_date - S_CONTACT.BIRTH_DT)/360) < 0 THEN NULL ELSE FLOOR((p_business_date - S_CONTACT.BIRTH_DT)/360) END AS AGE,
S_CONTACT.SEX_MF AS SEX,
NULL AS NumberOfChildren,
S_CONTACT_X.ATTRIB_34 AS OCCUPATION,
CASE WHEN SUBSTR(S_CONTACT_X.ATTRIB_37,1,4)='Othe' THEN 'Othr'
WHEN SUBSTR(S_CONTACT_X.ATTRIB_37,1,4)='Inte' THEN 'Intr'
WHEN SUBSTR(S_CONTACT_X.ATTRIB_37,1,4)='Prin' THEN 'News'
WHEN SUBSTR(S_CONTACT_X.ATTRIB_37,1,4)='Gues' THEN 'Gst'
ELSE SUBSTR(S_CONTACT_X.ATTRIB_37,1,4) END AS LeadSource,
SUBSTR(Consultant.EMP_NUM,1,10) AS CONSULTANT,
ProgramDirector.EMP_NUM AS ProgramDirector,
CallTaker.EMP_NUM CallTaker,
S_CONTACT.X_LEAD_DT AS LeadDate,
LEAST(nvl(S_CONTACT.X_LAST_CONSULTATION_DATE,O.FirstPurchaseDate ), nvl(O.FirstPurchaseDate,S_CONTACT.X_LAST_CONSULTATION_DATE+1) ) AS FirstVisitDate, --X_LAST_CONSULTATION_DATE stores the performed date or the legacy client firstvisitdate
GREATEST(nvl(S_CONTACT_XM.X_CONSULTATION_DT ,S_CONTACT_X.ATTRIB_29), nvl(S_CONTACT_X.ATTRIB_29, S_CONTACT_XM.X_CONSULTATION_DT-1) ) AS LastVisitDate,
CASE WHEN S_CONTACT.X_INSTALLMENT_BALANCE > 0 THEN 'B' ELSE NULL END AS BillType,
ct.current_client_type ClientType,
SUBSTR(ct.saved_client_type,1,1) PreviousClientType,
S_CONTACT.LAST_CREDIT_DT AS AppointmentDate,
CASE WHEN a.X_DR_LETTER_STATUS IS NOT NULL THEN 'Y' ELSE 'N' END AS DoctorLetterRequired,
NULL AS OneYearPermStabilizationDate,
DECODE(S_PROD_INT.X_PROGRAM_CLASSIFICATION,'Premium',a.START_DT ,NULL) AS UnlimitedPermStabilizationDate,
SUBSTR(S_CONTACT.MARITAL_STAT_CD,1,1) AS MaritalStatus,
SUBSTR(REFERRER.FST_NAME ||' '|| REFERRER.LAST_NAME,1,34) AS ReferrerName,
ORGEXT_REF.LOC AS ReferrerCentreID,
S_ORG_EXT.LOC AS CentreID,
NULL AS PaymentDateOne,
NULL AS PaymentAmountOne,
NULL AS PaymentDateTwo,
NULL AS PaymentAmountTwo,
NULL AS PaymentDateThree,
NULL AS PaymentAmountThree,
NULL AS PaymentDateFour,
NULL AS PaymentAmountFour,
NULL AS LibraryPurchased,
nvl(S_CONTACT.X_INSTALLMENT_BALANCE,0) + nvl(S_CONTACT.X_PREPAID_BALANCE,0) AS BalanceDue, -- Changed operation from (-) prepaid to (+) prepaid since the sign was flipped in OLTP.
NULL AS FoodNSFBalance,
NULL AS ProductNSFBalance,
NULL AS ProgramNSFBalance,
a2.X_START_WEIGHT AS StartWeight,
a2.X_CURRENT_WEIGHT AS CurrentWeight,
a2.X_GOAL_WEIGHT AS GoalWeight,
a3.X_HEIGHT AS Height,
a2.X_FAXSENT_DATETIME DateGoalWeightAchieved,
DECODE(S_PROD_INT.X_PROGRAM_CLASSIFICATION,'Premium',a.START_DT,NULL) AS DateSuccessPlusPurchased,
CASE WHEN A2.ARCHIVE_FLG = 'N' THEN a2.START_DT ELSE NULL END AS ReturnToActiveDate,
600 VersionNumber,
a2.X_FAXRECV_DATETIME AS HalfWayDate,
NULL AS LastLSCDate,
TRUNC(S_CONTACT.LAST_UPD-UTC_OFFSET/24) AS LastUpdatedDate,
NULL AS VitaminWaiverSigned,
LastSupplementPurchaseDate,
LastSupplementCodePurchased,
LastTotalSupplementSupplyCycle,
LastAddtlSupplPurchaseDate,
LastAddtlSupplCodePurchased,
LastAddtlSupplSupplyCycle,
CASE WHEN (a.X_DIABETES_NO_MEDS_FLG='Y' OR a.X_DIABETES_ORAL_MEDS_FLG = 'Y' OR a.X_DIABETES_ON_INSULIN_FLG = 'Y') THEN 'Y' ELSE 'N' END AS DiabetesClient,
DECODE(a.X_DIABETES_NO_MEDS_FLG,'Y','Y','N') AS DietControlled,
a.X_DIABETES_ORAL_MEDS_FLG AS TakingOralMed,
a.X_DIABETES_ON_INSULIN_FLG AS TakingInsulin,
S_CONTACT.EMAIL_ADDR AS EmailId,
NULL CTADATE,
NULL RWLDATE,
SUBSTR(S_ADDR_PER.ADDR_LINE_2,1,40) AS Address2
FROM S_CONTACT,
S_CONTACT REFERRER,
S_CONTACT Consultant,
S_CONTACT ProgramDirector,
S_CONTACT CallTaker,
S_CONTACT_X,
(SELECT /*+ parallel full(S_CONTACT_XM) */ PAR_ROW_ID, attrib_05, MAX(X_CONSULTATION_DT) AS X_CONSULTATION_DT FROM S_CONTACT_XM
WHERE (S_CONTACT_XM.last_upd_by < '1-14WD'
or S_CONTACT_XM.last_upd_by > '1-14WD')
AND S_CONTACT_XM.ATTRIB_05 IN (SELECT row_id FROM S_ORG_EXT WHERE S_ORG_EXT.ACCNT_TYPE_CD IN ('Corporate Centre','Franchise Centre')) LOC IN (SELECT centreid FROM UPL_LIVE_CENTRES WHERE LIVE = 'Y' AND BATCHID = p_batch_id)) where S_ORG_EXT.ACCNT_TYPE_CD IN ('Corporate Centre','Franchise Centre')) --
GROUP BY PAR_ROW_ID, attrib_05) S_CONTACT_XM,
(SELECT CONTACT_ID, ACCNT_ID,
MAX(LastSupplementPurchaseDate) AS LastSupplementPurchaseDate,
MAX(LastSupplementCodePurchased) AS LastSupplementCodePurchased,
MAX(LastTotalSupplementSupplyCycle) AS LastTotalSupplementSupplyCycle,
MAX(LastAddtlSupplPurchaseDate) AS LastAddtlSupplPurchaseDate,
MAX(LastAddtlSupplCodePurchased) AS LastAddtlSupplCodePurchased,
MAX(LastAddtlSupplSupplyCycle) AS LastAddtlSupplSupplyCycle,
MIN(FirstPurchaseDate) AS FirstPurchaseDate,
MAX(LastPurchaseDate) AS LastPurchaseDate
          FROM (
          SELECT /*+ parallel full(S_ORDER) full(S_ORDER_XM) */ S_ORDER.CONTACT_ID AS CONTACT_ID,S_ORDER.ACCNT_ID,
NULL AS LastSupplementPurchaseDate,
NULL AS LastSupplementCodePurchased,
NULL AS LastTotalSupplementSupplyCycle,
NULL AS LastAddtlSupplPurchaseDate,
NULL AS LastAddtlSupplCodePurchased,
NULL AS LastAddtlSupplSupplyCycle,
(S_ORDER_XM.X_BUSINESS_DATE) FirstPurchaseDate,
(S_ORDER_XM.X_BUSINESS_DATE) LastPurchaseDate
          FROM S_ORDER,S_ORDER_XM
          WHERE S_ORDER.ROW_ID = S_ORDER_XM.PAR_ROW_ID
          AND S_ORDER.STATUS_CD IN ('Complete', 'Submitted', 'Ready')
          AND TRUNC(S_ORDER_XM.X_BUSINESS_DATE - UTC_OFFSET/24) <= (p_business_date)
          --GROUP BY S_ORDER.CONTACT_ID
          UNION ALL
          SELECT /*+ parallel full(S_ORDER) full (S_ORDER_ITEM) */ S_ORDER.CONTACT_ID AS CONTACT_ID,S_ORDER.ACCNT_ID,
          (CASE WHEN SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) = '931' THEN S_ORDER.CREATED ELSE NULL END) AS LastSupplementPurchaseDate,
          (CASE WHEN SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) = '931' THEN 931 ELSE NULL END) AS LastSupplementCodePurchased,
          (CASE WHEN SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) = '931' THEN 7 ELSE NULL END) AS LastTotalSupplementSupplyCycle,
          (CASE WHEN SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) = '920' THEN S_ORDER.CREATED ELSE NULL END) AS LastAddtlSupplPurchaseDate,
          (CASE WHEN SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) = '920' THEN 920 ELSE NULL END) AS LastAddtlSupplCodePurchased,
          (CASE WHEN SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) = '920' THEN 28 ELSE NULL END) AS LastAddtlSupplSupplyCycle,
          NULL FirstPurchaseDate,
          NULL LastPurchaseDate
          FROM S_ORDER,S_ORDER_ITEM, S_PROD_INT
          WHERE S_ORDER_ITEM.PROD_ID = S_PROD_INT.ROW_ID
               AND S_ORDER.ROW_ID = S_ORDER_ITEM.ORDER_ID
               AND S_ORDER_ITEM.qty_req <> 0
               AND s_order.created_by <> '1-14WD'
               AND S_ORDER_ITEM.PAR_ORDER_ITEM_ID is null
               AND (S_ORDER_ITEM.PAR_ORDER_ITEM_ID is null
               OR EXISTS (select 1 from S_ORDER_ITEM i2,s_prod_int p
where i2.row_id = S_ORDER_ITEM.PAR_ORDER_ITEM_ID
and SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) IN ('931','920')
and i2.prod_id = p.row_id
               AND S_ORDER.status_cd in ('Complete', 'Submitted', 'Ready')
               and SUBSTR(SUBSTR(S_PROD_INT.PART_NUM,1,INSTR(S_PROD_INT.PART_NUM,'-',1,1)-1),2,4) IN ('931','920')
GROUP BY CONTACT_ID,ACCNT_ID) O,
S_CONTACT_TNTX,
S_ORG_EXT,
S_ORG_EXT ORGEXT_REF,
S_ADDR_PER,
S_ASSET a,
S_PROD_INT,
S_ASSET a2,
S_ASSET a3,
UPL_CLIENT_TYPES ct,
(select /*+ parallel */ o.contact_id, o.accnt_id
from S_ORDER o, S_ORDER_XM oxm
where o.row_id = oxm.par_row_id
and trunc(oxm.X_BUSINESS_DATE - (UTC_OFFSET/24)) = trunc(p_business_date)
group by o.contact_id, o.accnt_id) oxm2
WHERE S_CONTACT.ROW_ID = S_CONTACT_X.PAR_ROW_ID
AND S_CONTACT_X.ROW_ID = S_CONTACT_XM.PAR_ROW_ID (+)
AND (S_ORG_EXT.ROW_ID = S_CONTACT.PR_DEPT_OU_ID
OR S_ORG_EXT.ROW_ID = oxm2.accnt_id
OR S_ORG_EXT.ROW_ID = S_CONTACT_XM.attrib_05)
AND ORGEXT_REF.ROW_ID(+) = REFERRER.PR_DEPT_OU_ID
AND S_CONTACT.CON_ASST_PER_ID = Consultant.ROW_ID
AND S_ORG_EXT.X_DIRECTOR_ID = ProgramDirector.ROW_ID (+)
AND S_CONTACT.CREATED_BY = CallTaker.ROW_ID
AND S_CONTACT.ROW_ID = a.PR_CON_ID (+)
AND S_CONTACT.PR_PER_ADDR_ID = S_ADDR_PER.ROW_ID (+)
AND S_CONTACT_TNTX.PAR_ROW_ID (+) = S_CONTACT.ROW_ID
AND REFERRER.ROW_ID(+) = S_CONTACT_TNTX.REFERRED_BY_ID
AND a.PROD_ID = S_PROD_INT.ROW_ID (+)
AND O.CONTACT_ID (+) = S_CONTACT.ROW_ID
AND a.STATUS_CD (+) = 'Active'
AND a.TYPE_CD (+) ='Program'
AND S_CONTACT.ROW_ID = a2.PR_CON_ID (+)
AND a2.STATUS_CD (+) = 'Active'
AND a2.TYPE_CD (+) = 'Lifecycle'
AND a3.PR_CON_ID(+) = S_CONTACT.ROW_ID
AND a3.STATUS_CD (+) = 'Active'
AND a3.TYPE_CD (+) = 'HealthSheet'
AND S_CONTACT.X_JC_ACNT_NUM = ct.CLIENT_NUMBER (+)
--AND S_ORG_EXT.LOC NOT LIKE 'F%'
AND S_ORG_EXT.ACCNT_TYPE_CD NOT IN 'Division'
--AND S_ORG_EXT.Loc in (select to_char(centreid) from UPL_LIVE_CENTRES where LIVE = 'Y')
AND (trunc(S_CONTACT.LAST_UPD - (UTC_OFFSET/24)) = trunc(p_business_date) or trunc(S_CONTACT_X.LAST_UPD - (UTC_OFFSET/24)) = trunc(p_business_date) OR (S_CONTACT_XM.X_CONSULTATION_DT = p_business_date) OR oxm2.CONTACT_ID IS NOT NULL)
AND S_CONTACT.last_upd_by not in ('1-14WD')
AND oxm2.CONTACT_ID (+) = o.CONTACT_ID
AND S_ORG_EXT.LOC <> 'CW_846'
AND (a.pr_accnt_id in (select row_id from S_ORG_EXT where S_ORG_EXT.LOC IN (Select CentreID from UPL_Live_Centres where BATCHID = p_batch_id)) or a.pr_accnt_id is null)
AND (a2.pr_accnt_id in (select row_id from S_ORG_EXT where S_ORG_EXT.LOC IN (Select CentreID from UPL_Live_Centres where BATCHID = p_batch_id)) or a2.pr_accnt_id is null)
AND (a3.pr_accnt_id in (select row_id from S_ORG_EXT where S_ORG_EXT.LOC IN (Select CentreID from UPL_Live_Centres where BATCHID = p_batch_id)) or a3.pr_accnt_id is null));
rollback;
END;
--------------------------------------------------------------------------------------------------

Error in Looping with variable

Dear All,
Please help me. i want to loop of record. i have two scheme. First, i make without variable and not error. Second, i make with variable and error occurs. as below my syntax:
First:
declare
x varchar(50);
begin
--x:='select dummy from dual';
for c1 in (select dummy from dual) loop
dbms_output.put_line(c1.dummy);
end loop;
end;
result:
X
Second:
declare
x varchar(50);
begin
x:='select dummy from dual';
for c1 in (x) loop
dbms_output.put_line(c1.dummy);
end loop;
end;
result:
Encountered the symbol 'LOOP' when expecting one...

Billy Verreynne wrote:
Why? For what purpose?
A cursor fetch loop is not the ideal processing structure.
It is slow. It requires data to travel from the buffer cache of the database into PL/SQL variables (in the PGA). It requires context switching between the PL/SQL and SQL engines.
It does not scale. More rows means more data to travel that path from the SQL engine to the PL/SQL engine. More loop iterations in PL/SQL. If a single loop iteration (for processing a row) is 1ms, then a 100,000 rows will take a 100 seconds. 200,000 rows 200 seconds. Etc. This clearly does not scale with an increase in data volume.
Also keep in mind that DBMS_OUTPUT does not write to screen or display anything. It is incapable of accessing a client device as it executes inside a server process. So each call to DBMS_OUTPUT stores that line of text in very expensive server memory. When the database call is done, the client (e.g. TOAD or SQL*Plus) can read those lines from the database and the client can display it.
So if your loop is for a 1000 rows, it means writing a 1000 lines of text into very expensive server memory - and then expecting the client to read that afterwards and display it. Why? This is not a standard client-server method. It also does not scale. It can actually crash the server when this method is abused.
The standard method would be to create a SQL cursor using PL/SQL code, and then return a reference handle (pointer) to the client. This allows the client the ability to fetch data directly from the cursor - in an optimal way that does not consume expensive server memory.I have to say it: I sincerely appreciate you taking the time to write this whenever it needs to be written rather than just giving up and letting people stumble along with bad design - it must take a lot of mental stamina to keep doing it. One day it will sink into my head also :-)

Problem with variable substitution.

Hello,
I asked this before but now I want to change the question focus.
I have scenario from IDOC to XML file.
The scenario is digital invoice for our company in Mexico and I end this scenario with java mapping that I import from SAP marketplace.
Now I have request to add to the XML file name the content of the field "<ODN_NUMBER>" from the XML data.
I try to use with variables substitution.
My payload is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ZINVOIC02>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>400</MANDT>
<DOCNUM>0000000006599015</DOCNUM>
<DOCREL>700</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>INVOIC02</IDOCTYP>
<CIMTYP>ZINVOIC02</CIMTYP>
<MESTYP>INVOIC</MESTYP>
<STDMES>ZEDI</STDMES>
<SNDPOR>SAPDEV</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>DEV400ECC</SNDPRN>
<RCVPOR>SAPDEV</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPFC>LS</RCVPFC>
<RCVPRN>MX_INV</RCVPRN>
<CREDAT>20100118</CREDAT>
<CRETIM>075931</CRETIM>
<SERIAL>20100118075931</SERIAL>
</EDI_DC40>
- <E1EDK01 SEGMENT="1">
<CURCY>USD</CURCY>
<HWAER>MXN</HWAER>
<WKURS>10.55530</WKURS>
<ZTERM>0090</ZTERM>
<KUNDEUINR>ACH971209KRA</KUNDEUINR>
<BSART>INVO</BSART>
<BELNR>0100017295</BELNR>
<BRGEW>0.045</BRGEW>
<GEWEI>KGM</GEWEI>
<FKART_RL>LR</FKART_RL>
<RECIPNT_NO>0000012977</RECIPNT_NO>
<FKTYP>L</FKTYP>
- <Z1EDK01 SEGMENT="1">
<XML_VERSION>2.0</XML_VERSION>
<ODN_PREFIX>A</ODN_PREFIX>
<ODN_NUMBER>1883</ODN_NUMBER>
<DATE_TIME>2009-11-01T17:05:10</DATE_TIME>
<DOC_SUB_TOTAL>4.22</DOC_SUB_TOTAL>
<DOC_DISCOUNT>3.00</DOC_DISCOUNT>
<DOC_TOTAL>1.40</DOC_TOTAL>
</Z1EDK01>
And the xml that I create is:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
- <Conceptos>
I try to use with this variable:
payload:ZINVOIC02,1,IDOC,1,E1EDK01,1,Z1EDK01,1,ODN_NUMBER,1
I received in RWB the error:
Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var_filename
Thank you in advance for your help
Elad

But my target is looks very strange:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
I need to add folio field
Elad

Dynamic target directory with variable substitution

Hi everyone.
I'm trying to save a file in a folder with receiver adapter.
This folder is determined in runtime and passed to the adapter with variable substitution. My problem is that in RWB i get a error like this : 'Content of variable XXXXX is not safe'
Does anybody have done a variable substituion for output directory receiver file adapter?
Regards,
Inigo.

Hi,
Check this links,
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Regards,
Phani

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Subreports with variable heights

Similar Messages

Maybe you are looking for