"SubReq" is still available in the stock/requirements list.

Hi SAP guru's,
In the subcontracting scenario for our client, the required quantity of child component will be provided to the subcontracting vendor.
For one particular purchase order,
Subcontracting PO for parent material "A" - qty 4284
Child component "B" - qty 24,996 provided to the vendor
"SubReq" is still available in the stock/requirements list of child component referring to the closed purchase order (delivery and invoice posting completed for full quantity, no open item quantity).
What could be the reason for this issue and what is the best solution.
Thanks in advance for your valuable reply.
Reddy.

Hi Csaba,
Thanks for your immediate response to my query.SubReq should not appear in MD04 w/o existing requirement (e.g. PO) as a standard but it is observed for this PO.
The OSS note "115899- Correction report for subcotractor requirements" is not giving the direct solution, but the content in this note may be useful to analyse and resolve the issue which we are trying.
Thanks & Regards,
Reddy GY.

Similar Messages

Reading the Stock requirment List

Hello Every one,
I had some questions reading the stock requirement list. When I am placing the curser on a planned order and expanding the overview tree for the lower levels, system breaks down the requirement to the lower levels. Agreend But why does the system repeat the same set of materials more than once in the overview tree showing the dependent requirements twice in both the lists? Is there any standard sequence in which the Stock requirement list can be evaluated?
Any help on this is greatly appreciated.
Sincerely,
Aji

Dear Dogboy,
I am facing the same problem. Let I will explain in detail...
I am using AFS material. There is a requirement for Pant large size 200 quantity and small size 100 quantity. When I run system raises
For one line item of pant large size system create planned order no 1223 for 200 quantity
and for another line item pant small size system create planned order no 1223 for 100 quantity.
Now, in MD04, when i place the cursor in planned order 1223 of first line item and expanding the overview tree, system shows requirement as 200 quantity.
When I place the cursor in the second line item and expands the overview tree, system shows requirement as 200 instead of 100.
Is this happening due to AFS material?
Regards / US

What is the reason for stock/requirements list disabled in MM03

Hi,
I hv a problem where display a material in MM03, the stock/requirements list is disable. When run in MD04, error date comes after end of valid factory calendar. (Please correct)
I hv corrected the PO delivery date but still the same, wht shld I check now ?
Thanks in advance for anyone reply my question.

extend your factory calendar using transaction SCAL
What you described has probably to do with some field values entered in the material master like delivery days, planning time fence ....
which make the planning determine a date for that you dont have a factory calendar.

Printing the Collective Stock/Requirements List

Hey All,
I'm trying to print out the collective stock/requirements list via the menu path "System -> List -> Save -> Local File" but it is shaded out and i cannot do this, just like SD variants are needed to be maintained in own data for the report VA05 so that layouts can be saved, do we also need some such varient maintained in own data to access this option ?
Best Regards.

Dear Danish,
After executing the Stock/Requirements List in MD04,in the top menu List -
> variable print --->From
here you can download into a spread sheet or as a local file or as a word processing.
Or else you can print from here.
Now come back with your further queries.
Dear Vivek, MDLD is to print out the MRP list (which is a static one and stock/requirements list is a
dynamic one).
Regards
Mangalraj.S

Stock Requirement List - MD04 - adding columns in this list

Dear All,
I am working on the Stock Requirement list ( transactioncode MD04) and the customer wants to add columns with the fields STPO-DATUV ,date of change of a drawing, and the drawing number with revision level STPO-YY_DZEINR.
There is a badi MD_ADD_COL_EZPS which provides in adding columns, but according the structures MDPSX , MDEZX and MDSUX there are no fields in thoser structures, which directly match with the required fields; somebody has a clue to help me out and get it working.
For instance: Vendor- and Customer data can be added by using the pushbuttons and those fields are available from above mentioned structures.
Thanks in advance and kindest regards,
Rene.

Hi Utpal Mishra
You guessed correctly. I missed to inform our Strategy. We are using Strategy group 11 Make-to-stock prod./gross reqmts plnning.
User is not able to do PGI or create delivery. He says I have enough stock in MMBE but why system is not allowing.
Here there are some pending document like -
1. Pending sales order
2. Pending deliveries (picking not done)
2. Delivery created & Picking Done but PGI not done. These things will have a commitment against the stock. But we are interested in getting these document numbers, so that we can take come action against them.
MD04 simply shows the mrp element as order / delivery but the document number is not available. How to find these documents.
Please help. Is there any table or a standard transaction ??
Thanks

Stock Requirements List

Friends,
When we are using the t-code MD04 to generate the stock requirements list for a material, it is throwing an error "Please maintain version in table T009". Table T009 is the table for fiscal year variants. There are no versions to be maintained there. Also, the fiscal year variant that is assigned to our company code is maintained there. Further, the stock requirement list is being generated for other materials (even those marked for deletion).
Please advise on how to solve this issue.
Thanks & Regards,
Sameer S. Gupte
Cell: +91 9323274801
Office: +91 66452730

Friends,
The problem was with the material master wherein a different fiscal year variant was maintained in the MRP view (different from the one attached to the company code). Changing the material master has solved this problem.
Thanks & Regards,
Sameer S. Gupte
Cell: +91 9323274801

Sales order not reflecting in the stock reqmt list

we have a MTO scenario.after the sales order is created we are not able to see the sales order in the stock requirement list.kindly please help.

Hi
following are the reason
1) Check requirement type in sale order and strategy group in material master.
2)if reason for rejection is activated in sales order.
3) cancel the sale order
4) schedule line category should be CP in sales order
Edited by: surendra patil on Dec 29, 2008 7:30 AM
Edited by: surendra patil on Dec 29, 2008 7:33 AM

Different Exception messages in MRP list & Stock Requirement List

Hello Experts,
When I run MRP and then look at the stock Requirement List & MRP list for the same material, I see different exception messages in these list.
I noticed that any of the exception messages in Exception group "7 - Exception during rescheduling" (ie, 10-reschedule in; 15-Reschedule Out; 20-cancel process; 30-plan process according to schedule) is not appearing in the stock requirement list even though they appear in the MRP list.
Does any configuration affect what message group can appear in Stock Requirement List & MRP list?
Please advice.
Regards
Tom

Hi Tom,
For exception message - 62, just do the below checks -
Some of the reasons as to why you may find this exception message is because the backward scheduling can drive the start date in the past so far that:
- there is no valid BOM as of that date
- one or more of the work centers are not valid on that date
- there is no valid factory calendar on that date
Check the scheduling formulas in your work centers that are set up, and/or to specify for the material master a fixed lot or a max lot size so that planned orders result with realistic lot sizes.
Also you can set up MRP to only run on basic dates for your overall run, and to follow up with an MRP run which generates capacity planning only within the planning horizon, such as NETPL. You would need to configure the planning horizon so that it specifies a time frame over which capacity planning is to be done.
Also check the note : 88505 - Planned order upload generates exception message 62
In short, do a thorough check of the parameters maintained to ensure there is no inconsistency in the master data.
Check & revert.
Regards,
Vivek

Question about consignment pick-up and stock requirement list

Hello,
why consignment pick-up order is not taking into account as a supply in the stock requirement list?
Thank you,
Gunadi

hi
if you check the the item category KAN for consign pick up at VOV7, you can find out it is a return from the consignment process.
so when the materials are coming in to ur plant, it is not a supply. it is your own material coming back to your stock.
once you do the sales order and PGR( post goods receipt) you can see in MMBE your stock level increases.
hope it is uuseful to u.
suresh

IDoc of Stock/Requirements List

Hi All:
The idoc of Stock/Requirements list is LOISTD01. The issue is, one of our business will have a non-SAP planning/scheduling tool integrated with ECC. They require me to send the Stock/Requirements list IDoc of all material/plant as frequently as possible. When I tried to execute POIT for generating the Stock/Requirements list it ran for 25 minutes for just one plant. And throw in 10 more plants and add the external planning tool's processing time you have a recipe for disaster to begin with. The before mentioned scenario was in Q and not in Production, which should not alter the scenario significantly. Question is, is there a way I can send partial changes to Stock/Requirements list dynamically as they happen? Is there any Business event trigger that I could use to trigger the generation of partial idoc or any other thing?
Pl. help.
Thanks

i think its better to post this query here to get a good response - ABAP Development

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Thank you.

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Warranty has gone in October 2013..
I want to send back my macbook air back to apple store. The problem is that I bought it from US and now, I'm using it in Myanmar. If the program is free of charge for my device, it's worth trying to send back to US. Since mine is broken, I'm afraid Apple will take charges for reparing.
So, if anyone having the same problem as me, I would like to get suggestion....
Thank you!!

I have no idea about how to handle the international aspect of your question.
But here is the Apple writeup about the problem and the remedy. Maybe that will help you.
http://www.apple.com/support/macbookair-flashdrive/

Is numlock still available in the Function keys (F1-F12)

Hi all,
I have to use the numpad very frequently, so I would like to know if there is any way I can use the numeric keypad in the new Macbook?
Is the old numlock button still available in the Function Keys (F1-F12)?
Thanks

I'm not precisely sure about the situation with the ']' key. It sounds as if perhaps the keyboard doesn't match the language or region of the system. Without knowing more, the first place to go would be the Keyboard tab in the Keyboard preferences pane.
There are buttons there to set the type of keyboard connected, and also check the settings of the modifier keys, including 'Caps Lock', 'Shift', 'Command', and 'Option'.
As far as setting keyboard shortcuts for 'F' keys, if you go to the *Keyboard Shortcuts* tab in the Keyboard preference pane and click on the categories in the left column, you should be able to see current settings, and define new ones if necessary.
!http://img228.imageshack.us/img228/5186/scottdartve1.png!

Table for Stock Requirement List related information

Dear Sir,
We have make-to-order scenario , on receiving the Order from Customer we first create a Sale-Order for the Ordered Item . Subsequently in MD04 , we find a requirement getting reflected for the Customer Order .
For example say the Sale-Order number is S-101 and the Line Item is 10 for the FERT material say FERT-101 having the Order quantity as 1 number . In MD04 , we find a requirement getting reflected with the following information :
MRP Element --> CustOrd
MRP element data --> S-101 / 00010 / 0001
Recd/Reqd Qty --> 1-
Available Qty --> 1-
We need to write a Z program for getting the list of the requirements against the Customer Order (as shown in MD04) .
Kindly guide us as which Tables we need to refer for getting the above information pl .
We assure to award full points for the suggested solution .
Rgds
B Mittal

Hi,
Pls use below function module, same as you will get Stock Requirement List related information
MD_STOCK_REQUIREMENTS_LIST_API
For test, goto SE37 and test it
Regards,
Sankaran

Transistion in SAP to know The Stock For List Of Material

Dear Sir,
Is there any transistion in SAP.
To know the stock for list of material.
For Ex=
I want to know the stock for below material in one shot
1) A
2) B
3) C
4) D
Pls solve my problem soon
Thanks & Regards
Ajay Pareek

Hi Ajay,
Following are the some of Useful T.Codes for the stock Report.
LT51 Maintain Preallocated Stock
LVASE Exit stock from Work Center
LX02 Stock list
LX23 Stock comparison IM - WM
LX27 Stock levels by shelf life exp.date
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5OA Display Valuated GR Blocked Stock
MB5T Stock in transit CC
MB5TD Stock in Transit on Key Date
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MILL_ Cutting Stock Transfer
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE Stock Overview
MMBE_ Stock Overview
MMCL Stock Overview by Characteristic
Or you can refer the thread [stock overview;, search there are several threads already available regarding this.
Regards,
Shyamal

Stock requirements list issue

Hi all,
Pl go through the following issue:
There is a material B. It is a component of Material A in BOM. This material A is to be supplied by a vendor by subcontracting.
There is a subcontracting requiment for some 70,000 pieces for this material B for the past one month .But there is no pegged requirement corresponding to this requirement . So , this stray requirement , which is available in stock requirements list of Material B is to be eliminated.
Can you pl suggest some solution?
Those who can give a probable solution shall be awarded points immediately.
Edited by: venkateswara rao on Aug 21, 2008 7:52 AM
Edited by: venkateswara rao on Aug 21, 2008 7:53 AM

I have gone through the OSS notes and understood that it is a programme error . Hence the inconsistency.

"SubReq" is still available in the stock/requirements list.

Similar Messages

Maybe you are looking for