Subroutine used to send idocs to the legacy system.

Created a subroutine, which is responsible for creating the IDOCu2019S to be sent to the respective Legacy System
how to do this pls explain regarding this.
pls send with examples and links regarding this

Use Apple's Mail instead. It has templates too, and more of them. Other than that, remember:
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

  • Send IDoc to the same client

    Hi:
    How to send IDoc to the same client of the same system, e.g. for testing purpose? It seems I can't use the same logical system as both source and target in Distribution Model (SALE).
    Please advise. Thanks

    You wont be able to send it to same client. You can create/copy one more client assign logical system and try to perform your activity.

  • Error while posting idoc in the receiving system.

    i have processed idoc in the same system( sending and receiving idoc in the same system ) by creating a dummy logical sys and uploading a text file for customer details.The outbound processing is succesful and it shows a status message 3. But duriing the inbound processing it shows status as 51 with error as 'ENTER VALID VALUE'. but when testing using we19 it is posted sucessfully without any error..is there anything that i have to configure to process inbound idoc sucessfully?? can any suggest me the correct method for doing this.. suggestions please..
    thanks
    vidya sagar

    Hi,
    you need to make sure that in WE20 inbound processing parameters for you LS is maintained propperly. You need to give correct function module and enter whether IDoc should be processed immediately or IDocs should be collected and processed as batch. Also you may check whether the distribution model (BD64) is maintained correctly for the specific message type in the system for inbound processing.
    Regards,
    Kai

  • Send idoc to external sap system

    hi all,
    is it possible to send IDoc to a sap system which is not in the same network with XI? If yes, is there any special points that should be taken care?
    Regards,
    Hui

    HI Hui
    It is possible. But it is IDOC to IDOC Scenario.
    Check these below SAP contribution docs on Idoc-Idoc scenario:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
    Cheers..
    Vasu
    <i>** Reward points if found useful **</i>

  • Howto Send IDOC to third-party system. programID can not be registered.

    Hi, guys.
    I want to post IDOC to a third-party system through XI. And for sure, the third-party system can receive IDOC.
    In the receiver communication channel, I would fill in the RFC Destination with a RFC connection defined in SM59.
    In SM59, it is a tcp/ip connection and in technical settings the activation type is Registered Server Program. I name the Program ID randomly with 'a.a'. In Gateway Options, I fill the host with XI server and service with sapgw01.
    Then I test the connection, the result is program a.a not registered on XI server.
    My question is how to register the progam when I want to use this RFC to send IDOC to the third-party system. And how the RFC know which system he would connect. I don't find anyplace with the connection information such as IP or something like this.

    Sergio Cipolla 
    Thank you for your material. I have read the doc you refered.
    Almost I understand the process, there is one part.
    I should register the program ID in saprfc.ini file with the following content:
    DEST=FROMXI
    TYPE=R
    GWHOST=saphost
    GWSERV=sapgateway
    PROGID=a.a
    Here I am wondering the fiield "DEST" represent for. Does it mean the hostname of the target external system?
    And Here is the UNIX system, what is the path location of the file saprfc.ini or where I should put this file to be effective.
    Thanks in advance.
    Bu Ju

  • Using BAPI_ROUTING_CREATE to copy routing from legacy system

    Hi,
    I would like to know whether its possible to use BAPI_ROUTING_CREATE in my Routing conversion program to upload all routing data from the legacy system into SAP?
    It's kind of urgent.
    Thanks in advance

    Well actually that´s almost exactly what my task is as well.
    So what i do is:
    - reading the headdata of the given routing (the one which is to be copied)
    - reading the positiondata of the given routing (the one which is to be copied)
    then calling the BAPI_ROUTING_CREATE while exporting the headdata and the positiondata to the BAPI.
    It works perfect for the routing itself, but the BAPI doesnt create any operations while it displays a sucess message and NO errormessages.

  • Sending IDoc to Non-SAP system

    Hi Folks,
        I have to send an IDoc to the external system. Kindly let me know the steps to be performed for it.
    Reagrds,
      santosh

    Just to be a little more clear. The step 8 in the previous link.
    8. Checking the Partner Profiles.
    o       Go to T. Code WE20
    o       Expand Partner Type 'Vendor'
    o       Select the Partner profile __
    o       Double click on Message Type ZCATSTIME in Outbound parmtrs.
    o       Check Receiver Port is assigned correctlyo     
    Check the Basic type as your Basic IDOC object.
    Disha.

  • HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

    I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

    Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
    It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

  • Tables that contains the legacy systems authorization information

    Hi all,
    I'm setting up legacy systems in my SAP GRC 5.3. We would like to check if the information uploaded from the extractor is correct. Does anyone know what are the GRC 5.3 tables that contains all the systems authorization from the legacy system uploaded?
    Thank you in advanced.

    Hi,
    If I understand your question correctly, you wish to know the GRC 5.3 RAR tables that contains the authorization information and want to connect a legacy system.
    If you check the /VIRSA/* tables, you can find all the GRC related tables.
    However, if you are trying to perform an offline risk analysis, refer the below Article:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20a06e3f-24b6-2a10-dba0-e8174339c47c
    Hope this helps!!
    Regards,
    Raghu

  • Idoc not recive while sending using program & SEND IDOC IMMEDIATELY in we20

    <b>i am sending idoc using program</b> - with function master dat distribute function,
    now if i set SEND IDOC IMMEDIATELY in outbound message in we20 'partner profile' than idoc get status 03 but at reciver end idoc not found with any status.
    if select collect idoc immideatly than work properly.
    what precaution needed while sendig idoc throug send idoc immideatly with Program,
    regards,
    r p.

    Hi rp,
    when using SEND IDOC IMMEDIATELY in outbound messge, the packet size should be 1 and use start subsystem option.
    Thanks,
    Rajeev Gupta
    Message was edited by:
            RAJEEV GUPTA

  • IDOCs in status 12 not reaching the Legacy System

    Hi Experts,
    I am facing problem with a specific set of IDOCs in R/3.
    the IDOCs are with status 12.
    Queues are fine. SMQ1, SMQ2 are clear.
    Also I don’t find any communication errors : (SM58 in XI)
    All adapters were also working fine
    <b>And in SXMB_MONI we found messages with “still waiting acknowledgement”</b>
    Can anybody give me an idea about what might went Wrong.
    I performed all the necessary checking but couldn't trace any errors.

    Hi Santosh
    There may be a problem in ur configurations. Please check the status of our idoc in the tcode : sm58 (in R/3).
    I think your IDOC was strucked here. Check the status.
    **Award the Points if it is useful**
    Cheers...
    Vasu

  • Missing IDOCS with status "qRFC used to send IDoc to SAP system"

    We are running ECC6.0 (HR System) and are sending IDOCS to XI (PI7.0 SP10)for mapping before they end up in a 4.7 system.
    We have implemented the Queue processing here: /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
    We have two queues set up for different countries (Eurpoean roll out) and they have different Message Types for the same Logical System. 
    We have been getting serialitazion issues due to IDOCS not being sent, although they are showing in ECC6.0 as sent, they have not hit XI or subsequently the Target System.
    On the whole, this has worked well for a while, but over the last week, something has effected the consistency of the correctly sent IDOCS.  We had an update error with the Update Work Process, which left lots of short dumps, but this was fixed, but since then, we are getting these strange anomalies.
    I appreciate this strange behaviour, but has anyone come across this before?
    More an SAP than an XI issue, I think....  But as I appeciate your repsonses I added it here!  

    Hi Barry,
    03 does not mean the idoc is delivered, it does only mean that it was sent to port.
    The status that indicates that the idoc was delivered is 12 (idoc dispatched).
    For getting this status a report named RBDMOIND has to be run/scheduled.
    After this if the status becomes 12 the idoc is delivered otherwise if it is still 3 that means the idoc is still there.
    Regards,
    Sergio

  • Sending IDOC form the ABAP Program

    hi friends,
               can we send IDOC ( of type MATMAS) form ABAP Program. if it possible how can we send, are there any function modules to do so....could any one tell me the procedure to accomplish the task...i have finished the configuration sting in both reciver and sender systems....just need to send material in form of IDOC from abap program.
    ( Note: not form BD10).
    Thanks in advance,
    Santosh.

    Function MG_IDOC_CREATE_FULL_MAT
    ( to send the material in full) or
    MASTERIDOC_CREATE_REQ_MATMAS (based on idoc reduction)
    Just pass
    1 ) receiving system: fields rcvprn /
    rcvprt. If you leave these 2 fields blank, then it will determine the receiving system(s) via the distribution model.
    2 ) marakey = list of material numbers you want to send
    3 ) message type.
    example :
    CALL FUNCTION 'MG_IDOC_CREATE_FULL_MAT'
    EXPORTING
    rcvpfc = ' '
    rcvprn = receiver_prn
    rcvprt = receiver_prt
    sndpfc = ' '
    sndprn = ' '
    sndprt = ' '
    message_type = mestyp
    TABLES
    marakey = t_matkeypack
    EXCEPTIONS
    OTHERS = 0.

  • I was using Adobe Send Now for the longest time to send files; there was never a charge for it.  Now, does Adobe Send replace Adobe Send Now and is there a charge or fee for Adobe Send?  I can't get it towork!  Paul Madsen

    Does Adobe Send replace Adobe Send Now and if so, is it only available on a subscription (fee) basis?  Adobe Send Now was free; I was never charged for the service.

    Dear Sir or Madam at Adobe:
    Does "Adobe Send" replace "Adobe Send Now" and if so, is there a charge for it?  I was never charged for using Adobe Send Now.  I cannot get Adobe Send to work for me; I can upload the file from my computer but when I click the box to send a "personalized link" a message box drops down asking me to upgrade.  When I say no thanks, the message disappears but the box click does nothing.  Do I have to subscribe to Adobe Send and pay a monthly fee for it before I can use it?  Please explain what change has been made and what is going on with this program/service.  Thank you.  Paul Madsen 763-781-9118  [email protected]

  • How to check the status of an IDoc in the Target system

    Hi Experts,
    we are using a self-made program to send Material and BOMs from Client A to Client B into the same ERP System.
    How can I check the status of an IDoc in the Target Client B (like BD87 - ALE Monitor) ?
    If you have some examples or Function, please give me the information.
    Rewards if helpful.
    Regards,
    David

    Hi David
    As mentioned in the earlier reply you can check your status with tcodes:-BD87,WE02,WE05.What i guess from your querry is the staus of your idoc whether posted or not in target client B.Check in the target client for the message type which you are using (since its an program that means you must be using an customised idoc type or standard) .You might have maintained Basic type tcode:-WE30.Give in your messagetype,Basictype,Created at and executed using tcode :- BD87.The prerequisites are you need to create an Partner Profile(WE20) .For this you need to create to provide in your message type and Process code(we41,we42,we57).If you have to create an process code for customised one(se37) .You need to actuivate the idoc inbound processing .If you are using a file in your file make it sure the port is being maintained for the same to chek for unicode format in tcode :-WE21 (check or uncheck).
                    For standard BOM i recon you are using message type :-BOMMAT  and Processing code as:-BOMM.Its always advisible that instead of using an whole abap program you need to have an ETL tool that would take care of the extraction of data provided your client do have existing Legacy system in its place since it would be much faster and easier.
    Regards
    Somnath

Maybe you are looking for