Subscribed calendars on gmail does not appear on ical maverick

HELP !

You can see them in ICal on the right column but just like a List not as well as in Iphone or I Cal
So question,,,,,,How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone, I is easier to work with reminders in Ipad and Iphone rather to see them like a list on ICal?

Similar Messages

  • Event created on iPhone does not appear in iCal

    When I create an event on my phone and sync, it does not appear in iCal. Events created on my laptop sync without issue. Contacts sync both ways, but calendar events do not go from the phone to the computer. I am not using MobileMe to sync, simply using the USB cable.
    I have tried the following to resolve my issues:
    * Make sure iTunes and iPhone are up to date
    * Make sure all calendars are set to sync with iTunes
    * Try different USB ports on the laptop
    * Restart phone and computer
    * Reset sync history in iSync and re-sync
    * Follow directions in this support article: http://support.apple.com/kb/TS1627 to do a full reset of sync history and re-sync
    Yet after trying all of those solutions, I still cannot sync events created on my phone to my laptop. Does anyone out there know of anything else I can try that might work?
    Thank you,
    Cameron

    After a trip to the genius bar, I found how to solve this problem, at least for me:
    0) Plug in iPhone
    1) Start iCal
    2) Export all calendars (File -> Export)
    3) Quit iCal
    4) Delete all calendars from ~/Library/Calendars
    5) Start iCal
    6) Import all exported calendars
    7) Start iTunes, configure syncing to overwrite calendars on phone
    8) Sync iPhone

  • Reminders on iphone does not appear in ical

    Reminders opening page on my iphone also called reminders does not appear in my list called reminders in ical
    also I cannot change the name of a reminders list, it keeps reverting to the original name

    You can see them in ICal on the right column but just like a List not as well as in Iphone or I Cal
    So question,,,,,,How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone, I is easier to work with reminders in Ipad and Iphone rather to see them like a list on ICal?

  • Imported ics calendar does not appear in iCal on my iPhone

    When I import an .ics calendar to my iCal as a new calendar - it ends up in my "on my mac"-list and not on my "apple-ID-list" which (I figure) is the reason why the imported calendars aren't showing up on my iPhone iCal. What I can I do to change this??

    Hi,
    I couldn't import ics invitation received by email (in Mail). When I clicked on the ics invitation iCal was opening buy the ics invitation didn't appear.
    Reading a few post I realized I could drag the ics invitation from from to iCal and then the invitation appeared into the "Waiting to confirm box" - on the right of the calendar button. By default is tried to sync using the "on my mac" account.
    ANSWER:
    I wasn't using this account, so I DELETED all my "on my mac" calendars and iCloud calendar is now my default. From now on all my ics invitation are imported into iCal AND they sync flawlessly to my other device (iPhone 5 and iPad 4) and to people sharing this calendar.
    MacBook Pro (Retina, Mid 2012)

  • Calendar info window does not appear?

    When I double click an appointment in the calendar app the info window doesn't appear. However, it sometimes shows up when swiping the trackpad for mission control, but as if it's coming from off the screen. It still shows as being on Desktop 1 (I have dual monitors), but glides up onto Desktop 1 from off screen.  Essentially I can't edit an appointment I have to delete it and create it again. I'm guessing at some time the info window was dragged onto a different desktop or off screen, but how do I get it back on?

    I need to sync the Contacts of my iPad with my computer... I cannot find the info button on iTunes...

  • Incoming Gmail does not appear in Mail Inbox

    Since installing Lion, none of my Gmail messages appear in the Mail Inbox at the top of the sidebar.  I retrieve my mail using IMAP.  Further down in the sidebar, there is a Gmail folder and under that another folder that says, "All Mail."  My incoming messages are appearing in here, along with all the spam, messages that are filtered, etc.  How do I get them back into the Mail Inbox?

    It seems to have resolved the problem on its own.

  • Programmatically created calendar view does not appear on view selector menu

    Hi!
    I'm using the following code to create a calendar view for a list:
    using (var site = new SPSite("http://localhost"))
    var viewFields = new System.Collections.Specialized.StringCollection { dateStartFieldName, dateEndFieldName, titleFieldName };
    var query = string.Format("<Where><DateRangesOverlap><FieldRef Name='{0}' /><FieldRef Name='{1}' /><Value Type='DateTime'><Month /></Value></DateRangesOverlap></Where>", dateStartFieldName, dateEndFieldName);
    var viewData = string.Format("<FieldRef Name='{0}' Type='CalendarMonthTitle' /><FieldRef Name='{0}' Type='CalendarWeekTitle' /><FieldRef Name='' Type='CalendarWeekLocation' /><FieldRef Name='{0}' Type='CalendarDayTitle' /><FieldRef Name='' Type='CalendarDayLocation' />", titleFieldName);
    var list = site.RootWeb.Lists["ESM Leaves"];
    var newView = list.Views.Add("Calendar11", viewFields, query, 0, true, false, SPViewCollection.SPViewType.Calendar, false);
    newView.ViewData = viewData;
    newView.MobileView = true;
    newView.Update();
    list.Update();
    My problem is that even though the view is created, it does not appear in the View links just above my list. It only appears in the drop down menu of views in the ribbon. On the contrary, if I create the view using the browser user interface (not programmatically),
    the view appears in both places.
    Do you have any idea why this might be happening?
    Dimitris Papadimitriou, Software Development Professional

    Hi papadi,
    I can reproduce the issue that creating calendar view using programming method, the view isn’t shown in view selector menu, and this only happens to calendar view, html view or other views are shown in the menu.
    After editing the web part, disable the selector menu, then re-enable the selector menu again, I can see the calendar view shown in the view selector menu, create a new calendar view using programming, the calendar view shows as expected.
    This seems indicate there is some issue in the view selector menu display, I would suggest you to first disable the view selector menu through edit the web part properties, then create the calendar view.
    Thanks,
    Qiao
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Qiao Wei
    TechNet Community Support

  • Calendar tab does not appear in iTunes iPod preferences

    The calendar and contacts tab does not appear when I go to preferences in iTunes with my iPod is attached. I am running 10.3.9. I have rebuilt permissions and trashed prefs. Are the tabs a 10.4 feature? They seemed to be a part of iTunes 5 so I suspect they should be there. I have read about using iSync on the posts but would prefer it happen automatically when I plug my new iPod in. Thanks for any help you can give me.

    Quote from the page below "If you are using Mac OS 10.3.9 or earlier, you cannot use iTunes to sync contacts and calendars to iPod"
    You can check out the page for details: http://docs.info.apple.com/article.html?artnum=301374

  • When I sync my outlook 2013 calendar via Icloud, the changes that i made in my computer does not appear on my Iphone-4

    When I sync my outlook 2013 calendar via Icloud, the changes that i made in my computer does not appear on my Iphone-4

    If you using on a windows pc, maybe you should reinstall the iCloud Control Panel. You can download the latest version from here: http://support.apple.com/kb/DL1455?viewlocale=en_US
    If you cant see your changes on icloud.com than you have trouble between outlook and icloud. this is the part of the icloud control panel.

  • Calendar item does not appear in day view for Sunday August 1, 2010

    I have a strange problem. I have an appointment on Sunday August 1, 2010. When in day view, and move from Saturday July 31 to Sunday Augsust 1 the appointment does not appear. However, if you look at list view or month view, it is there. If you continue to Monday and then go back to Sunday (all in day view) it appears. There is another person in my office with the exact same problem, so I know it is not just my phone. Anyone else have this issue? Any fix? I am concerned about appointments I will miss because of this. I added appoinments directly into the phone, no server, no exchange, no sync, same problem. It appears to be a bug in OS4.

    Refer following link for understanding & solution:
    Accounting document not posted from billing document SD module
    Hopefully this can assist you.
    Thanks & Regards
    JP

  • How can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it? iPhone 5, iOS 7

    how can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it?
    iPhone 5, iOS 7

    jlfcba wrote:
    IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info.  There is nothing in iTunes relating to such an option either.  So, it seems I'm back to square one.
    If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
    If you have Gmail it does not.  Quite right. Gmail is rubbish.

  • Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

    Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

    I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
    Any help, please?
    Dave

    Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
    Kind Regards
    Dave Munn
    Original message----
    From : [email protected]
    Date : 02/02/2015 - 06:45 (GMTST)
    To : [email protected]
    Subject :  why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
        why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
        created by station_two in Photoshop General Discussion - View the full discussion
    First a clarification: you are not addressing Adobe here in these user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
    I'll give it my best shot anyway.
    Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
    Different engineering teams, also.
    From this perspective, it will be difficult to give you a direct answer to your "why?" question.
    Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
    Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are.  The least you could show is post examples from your panoramas that have gone wrong.
    I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
    The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years).  I found Elements so limited and so bad that I successfully demanded a refund from Adobe.  IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view.  I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
    Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
    Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT1296 After downloading iTunes 11, my calendar on my iMac (OS X 10.6.8) does not sync with iCal on my iPad 2.  Why is this?

    After downloading iTunes 11, my calendar on my iMac (OS X 10.6.8) does not sync with iCal on my iPad 2.  Why is this?

    Ok, here's what seems to have worked....but will need to monitor to see if this stays "stable".
    1)  As suggested by King_Penguin in another Discussion thread  [apple support > iPad > Using iPad > Discussions]  (https://discussions.apple.com/message/15911962#15911962), I turned off iPhoto startup on the iPhone.  Then ejected iPhone from USB.
    2)  Reconnected iPhone via USB.  iTunes did not start up.  Started up iTunes manually.  Went to Summary page for iPhone, unchecked the "open iTunes" option, selected APPLY button.  Let iTunes run its application process.
    3)  Then checked the "open iTunes" option.  Selected APPLY button.  Got a dialog box asking if I wanted "iTunes Helper" to be installed; selected YES.  Let iTunes run its application process. Ejected iPhone.  Closed out iTunes.  Reconnected iPhone via USB.  AND iTunes STARTED UP AUTOMATICALLY (yay!).  Let iTunes do some backup and sync'ing.  Ejected iPhone.  Closed out iTunes.
    4)  Connected iPad via USB (on computer).  AND iTunes STARTED UP AUTOMATICALLY (yay!).
    I don't know for sure that the iPhoto "automatic launch" was causing the interference, but it seems like the "uncheck/check" the "open iTunes" option seemed to re-set the problem that I encountered.  I don't want to say for sure that this issue is fixed, but it appears to be under control for the moment.
    Thanks to everyone for your thoughts and assistance.  Maybe this info will help someone else out now that it's in the forums/discussions.

  • SSRS Subscription - Email does not appear in the list

    Hi!
    I had some reports on ssrs and I want to send them by email. I've read that the option "email" shoul appear on the list "Delivered by".Does anyone knows why
    IT DOES NOT APPEAR (edited)?
    Thanks
    <edit2>I'm using SQL Server 2012 BI Edition & Microsoft Visual Studio 2008 running on Microsoft Windows Server 2008 R2</edit2>

    Hi Menri,
    According to the code you post, I find that there are some incorrect settings in your rsreportserver.config file. For more details, please see the followings:
    SMTPServerPort: Specifies an integer value indicating the port on which the SMTP service uses to send outgoing mail. Port 25 is typically used to send e-mail. So we should set this value to 25.
    SMTPAuthenticate: Specifies how the report server connects to the remote SMTP server. To send e-mail to restricted distribution lists (for example, distribution lists that accept incoming messages only from authenticated accounts), set SMTPAuthenticate
    to 2.
    SendEmailToUserAlias: When SendEmailToUserAlias is set to True, users who define individual subscriptions are automatically specified as recipients of the report. The To field is hidden. If this value is False, the To field is visible.
    DefaultHostName: This value works with SendEmailToUserAlias. Specifies a string value indicating the host name to append to the user alias when the SendEmailToUserAlias is set to true.
    The code in my environment is for your reference:
    <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
    <RSEmailDPConfiguration>
    <SMTPServer> smtp.gmail.com</SMTPServer>
    <SMTPServerPort>25</SMTPServerPort>
    <SMTPAccountName>
    </SMTPAccountName>
    <SMTPConnectionTimeout>
    </SMTPConnectionTimeout>
    <SMTPServerPickupDirectory>
    </SMTPServerPickupDirectory>
    <SMTPUseSSL>
    </SMTPUseSSL>
    <SendUsing>2</SendUsing>
    <SMTPAuthenticate>2</SMTPAuthenticate>
    <From> [email protected]</From>
    <EmbeddedRenderFormats>
    <RenderingExtension>MHTML</RenderingExtension>
    </EmbeddedRenderFormats>
    <PrivilegedUserRenderFormats>
    </PrivilegedUserRenderFormats>
    <ExcludedRenderFormats>
    <RenderingExtension>HTMLOWC</RenderingExtension>
    <RenderingExtension>NULL</RenderingExtension>
    <RenderingExtension>RGDI</RenderingExtension>
    </ExcludedRenderFormats>
    <SendEmailToUserAlias>False</SendEmailToUserAlias>
    <DefaultHostName>smtp.gmail.com</DefaultHostName>
    <PermittedHosts>
    </PermittedHosts>
    </RSEmailDPConfiguration>
    </Configuration>
    Please refer to the helpful documents below:
    http://technet.microsoft.com/en-us/library/ms159155.aspx
    http://msdn.microsoft.com/en-us/library/ms157273.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for

  • Where to write IF THEN ELASE statements in BEX Query Designer

    Hi All, I need to write a formula in query designer... saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs... So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams

  • How can i import raw files into iphoto from my Nikon D300?

    Just got a Nikon D300, and it will import jpg and tff, but not raw (nef) files-i prefer iphoto to their software- Nikon says to try talking to apple to find a way to do it- does anyone know any info that can help? I need to decide if I am keeping the

  • MWST as 0 value manulay needs to be entered in line items

    Hi All, Can we enter MWST condition type as 0 value manulay in each line item ?I am getting incompletion as mwst cannot be null value.

  • Missing background colour in image rollover in IE

    Just noticed I have a missing image background colour on a rollover link - it's fine in firefox and safari, but awol in IE(6). link here The CSS looks like : a:link img { padding: 5px; border: 1px solid #999999; a:visited img { padding: 5px; border:

  • C# Calling SAP RFC/Web Service Failure

    Hi SAP Experts, I am facing this problem. When an external system is calling my SAP RFC/Web Service, the external system(which is not SAP) is not getting the correct value. But when I test the RFC in SAP GUI It is working correctly. When I test betwe