Subscript & SuperScript in Crystal Report
hi ,
I m developing application which contain information about chemical compound. all formula of chemical compound contains superscript & subscript. I store value in database using sub & sup Tag .but crystal report does not support these tag
how can we change formula to subscript & superscript form in crystal Report as following
NH4Al(SO4)2.12H2O
Any help will be appreciated
Thanks in advance
Rupesh Kumar Swami
Software Engineer,
Integrated Solution,
Bikaner (India)
I think you might be able to use formulas to achieve what you are looking for. I found this kbase <a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2010059&sliceId=&dialogID=1988273&stateId=1 0 1986304" target="_blank">c2010059</a>, on the BOBJ support site that provides a series of steps to create formulas to achieve superscript text. The kbase uses dates as an example but you should be able to do the same for your needs. The similar should be possible for subscript text. Hopefully this helps you out! -MJ
Similar Messages
-
Register Superscript in crystal report XI
Can you please tell me how can I use registered ® as superscript in crystal XI?
Thanks,
SagarikaHelena, CR XI R2 is not supported in .NET 2008. See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/WhichCrystalReportsassemblyversionsaresupportedinwhichversionsofVisualStudio+.NET] wiki for more details.
Re. your unanswered post. Can you provide a link? I search for unanswered posts, but do not see one from you.
Remember that this is a community forum only, not support as such. If this is an important issue and you wish to discuss it with technical support, you can create a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek -
Subscript superscript in simple report
hi experts,
how to write 'H2O', in report,
2 will be in subscript(formula of water),
or to write' 2n' n in superscript ( 2 to the power n).
nb : o/p in simple report and not in any form layout.
regards
pankajHi,
Check the link ,there is a simillar requirement in the link
and try thos e alternatives.may be helpful.
https://forums.sdn.sap.com/click.jspa?searchID=11158129&messageID=3920035
Regards,
Raj. -
Purchase Order Crystal Report Layout Error
The stock Crystal Report Layout for Purchase Orders is giving me the following error:
A subscript must be between 1 and the size of the array.
Details: errorKind
Error in File POR20002 {b89f97ad-bf1f-447b-8bb4-b3d2e5219269}
{3C375C81-7D37-475D-9BCB-1703CE533B65}.rpt
Error in formula N_Decimal_Places:
'// To get the length of decimals
A subscript must be between 1 and the size of the array.
Details: errorKind
I looked in the Crystal Reports Formula fields and could not find N_Decimal_Places.
Has any one else had the problem with the PO layout that comes with Business One? If so, how did you fix it?Couldn't find how to copy the PO layout over using copy express.
I did compare the RDOC fields for POR20002 in both databases and they are Identical.
In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing. Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places. When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
Again, SBODemoUS works correctly and AAA_TEST give the error. -
Doubt in creating a variable in Crystal Report 2008 SP3
Hi,
I am new to Crystal Reports, I need to create a variable with the below logic.
No of Subscriptions Pending: COUNT(SUBSCRIPTION_ID) WHERE FCT_SUBSCRIPTION_ACTION.SUBSCRIPTION_ACTION_STATUS IN
(SELECT SUBSCRIPTION_ACTION_STATUS_CODE FROM LKM_SUBSCRIPTION_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'T')
My data source is an universe where I have SUBSCRIPTION_ID, SUBSCRIPTION_ACTION_STATUS, SUBSCRIPTION_ACTION_STATUS_CODE & FINAL_STATUS_FLAG objects.
I have pulled all the required objects from the universe into the Crystal Query.
As we don't have the option to use Where condition in CR (As per my knowledge), I want to know how to write the above logic using "If" or some other function.
Thanks in Advance,
Mitch.Hi Jamie,
Thanks for your reply & sorry for the late reply, I was away for Christmas.
I tried your formula but it is not working properly.
If I use "IF FINAL_STATUS_FLAG = 'T' THEN SUBSCRIPTION_ID" then it is giving all the subscriptions count instead of pending ones.
We need count the Subscription_ID's based on the Flag Status & the Action_Status & Action_Status_Code as per the formula.
No of Pending Subscriptions: COUNT(SUBSCRIPTION_ID) WHERE FCT_SUBSCRIPTION_ACTION.SUBSCRIPTION_ACTION_STATUS IN
(SELECT SUBSCRIPTION_ACTION_STATUS_CODE FROM LKM_SUBSCRIPTION_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'T')
But your method is not taking Status Codes into consideration (correct me, if I am wrong)
While checking against the Database I found the following results
1) SELECT DISTINCT SUBSCRIPTION_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS
Result: AM, BA, CA, DC, DE, DO, FI, FU, IN, NE, NO, OH, RE, TC
2) SELECT DISTINCT SUBSCRIPTION_ACTION_STATUS FROM FACT.FCT_ORDER_ACTION
Result: DC, TC, AM, IN, DE, NE, CO, DO, NO, BA, CA
Values in SUBSCRIPTION_ACTION_STATUS & SUBSCRIPTION_ACTION_STATUS_CODE differ. &
3) SELECT ORDER_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'T'
Result: CA, DC, DO
4) SELECT ORDER_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'F'
Result: AM, BA, DE, FI, FU, IN, NE, NO, OH, RE, TC
Any other way of doing this.
Thanks,
Mitch. -
Crystal Reports XI Web Elements - populate WESelect element values from database field
<p>Hi,</p><p>I am using Web Elements with Crystal Reports XI. I need to know how to populate the ElementValues and ElementDisplays arguments of the WESelect function from a database field. </p><p>In the function expert when I click on the ElementsValues and ElementDisplays values a drop down appears which will let me select a field or formula. However, when I try saving and leaving the formula workshop an error message is generated.</p><p> "A subscript must be between 1 and the size of the array".</p><p>I assume this is because the WESelect function is looking for the "|" separator in the ElementValues and ElementDisplays arguments.</p><p>Please advise.</p><p>Thanks</p>
hello,Â
in the webelements.zip download you should find a DCP report which shows the method for "rolling up" data using a subreport and passing these to a select control using shared variables.
basically a string running total rolls up the values at run time and character separates them for use by the controls. for any type of select (drop down menu etc.) controls all of the values have to be made available before the main report is run so that's why you use this techique. you can think of it this way...instead of having an asp page that runs a database query and then populates a javascript array for the control, the subreport rolls up the values and passes them to the control.
other types of controls that you wish to place directly on a group header or details section can be run off of main report fields or formulae...e.g. you can place a checkbox control on the details section without having to roll up the data in advance.
by just putting a field name in the parameter for a select control, you will only get one value per control.
i hope that this makes sense as it takes a bit to get used to at first,
jamie -
Crystal Report Best Practice Question
Hello All;
I have got a task regarding parameter passing to Crystal Report via Crystal Report, I would like to find best way to achieve it.
Imagine that I have got parameterized and non reports-parameterized. I am developing a report manager that will enable users to subscribe to the reports and schedule them with their parameters. I have got a subscription web page with the list of reports. When a user wants to subscribe to a report and schedule it, if there is no parameter in the report, it is fine but if there is any parameter that needs to be passed to the report(which we can find from rpt file), user should be able to enter these parameters values via a panel in the page. and I will save those parameters' values to the database.
Effectively, I need to create a parameter entry panel to get the parameters and save them to the database with their type, value and so on, then I need to use these parameters programmatically for exporting reports to the different file formats.
Basically, I must develop parameter entry panel run time in accordance with the parameter types that the corresponding report has.
Does anyone have any idea what the best way is to achieve it?
Thanks for your help from now on and please ask for further clarification if needed/
Kind Regards.Hi, mkosucu,
You can read the parameters out of the report at run time, prompt the user for them, then schedule it with those parameter values.
To get the parameters, use
ReportClientDocument.DataDefController.DataDefinition.ParameterFields
There's a tutorial that can be of some help:
[BOE XI R2 Developer Library|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm]
In the left pane select
.NET developer guide and API reference
..Tutorials
....Client Desktop Tutorials
......Scheduling a report containing specific parameter values
Regards,
Bryan -
If image file not exist in image path crystal report not open and give me exception error problem
Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as belowFirst: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP] -
Sales quote layout rows doubled in crystal report layout
Dear All,
Sales quote layout rows doubled in crystal report layout.
In sales quote layout the rows are doubled. Even in the standard layout. If the quote contains only two rows. Then it is doubled as 4 rows in the crystal report layout.
It is happening in the particular database. Other database are working fine. I request you people to help me to overcome this issue.
Regards,
SivaHi Siva,
If this is regarding CR in SAP B1 then please repost to the SAP Business One Application space.
-Abhilash -
Sale Order Query Print layout/Crystal Report Query required
Hi Experts,
I created a Sale Order. Items included in it are service and material.
(I created a BOM, bound the child material item to the parent service item. Moreover child item will have unit price where as parent item will not have unit price)
I need the report on it please let me know how i can do it.
I tried with below query
select a.DocEntry, a.DocNum, a.CardCode, a.CardName, b.DocEntry,b.ItemCode, b.Dscription, b.Quantity, b.Price, b.LineTotal, a.DocTotal, a.VatSum
from ORDR a inner join RDR1 b on a.DocEntry = b.DocEntry
--and b.TreeType <> 'N'
where a.docnum = '14240621'
output of above query is
DocEntry
DocNum
CardCode
CardName
DocEntry
ItemCode
Description
Qty
Unit Price
Line Total
DocTotal
Tax Amount
621
14240621
CDR0001
ABCDEFGH
621
302010001
PROVIDING & LAYING
17.62
2493.76
43940.05
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
MT0001
Material for PROVIDING & LAYING
17.62
2800
49336
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
305010005
BM CM INCLUDING CEMENT
10.055
1980
19908.9
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
MT0002
Material for BM CM INCLUDING CEMENT
10.055
1650
16590.75
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
302040001
P/APPLYING
65
116.5
7572.5
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
MT0003
Material for P/APPLYING
65
65
4225
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
301000001
P& FIXING
2.233
31625.05
70618.74
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
MT0004
Material for P& FIXING
2.233
44000
98252
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
306010001
PROVIDING RMC
3
3593
10779
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
MT0005
Material for PROVIDING RMC
3
4847
14541
354652
18888.46
and my desired output is
Unit price of both child item and parent item should be display in single column. ie. cumulative in Unit Price Column and Linetotal respectively.
DocEntry
DocNum
CardCode
CardName
DocEntry
ItemCode
Description
Qty
Unit Price
Line Total
DocTotal
Tax Amount
621
14240621
CDR0001
ABCDEFGH
621
302010001
PROVIDING & LAYING
17.62
5293.76
93276.05
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
305010005
BM CM INCLUDING CEMENT
10.055
3630
36499.65
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
302040001
P/APPLYING
65
181.5
11797.5
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
301000001
P& FIXING
2.233
75625.05
168870.7
354652
18888.46
621
14240621
CDR0001
ABCDEFGH
621
306010001
PROVIDING RMC
3
8440
25320
354652
18888.46
please let me know the update on this.
with regardsHi Nagarajan,
thanks for reply..
1) Yes, i.e i have taken into BomType: Template
2) i did not get any helpful output by using treetype by keeping 'S' and 'N', i kept in comment.
3) Actually MT0001-05 - these are material item- unit prices are fixed. see in attached image
for parent item, unit prices are not fixed. I give the price for them in Sale Order.
I want unit price for parent and child should be summed/cumulative for Sale Order print.
(in my above post, first matrix exactly same as sale order line items plz check it)
Please help me, how i can achieve this by query(for PLd or Crystal report)
With Regards -
SQL Connections remain open after Crystal Report closes
I am wirting an interface to use the crystal report viewer to print reports, connecting to a Progress Open Edge 10.1B database. From our application we declare the application, report, exportoptions and connectionproperties objects and pass these to the crystal reports viewer. Once the report is printed we release the objects and set their variables for null. However we are finding that the SQL connection to the database is remaining connected and we can only release the connection by manually going in a disconnecting.
I have read in forums that people use .dispose or .close to release the connection, however we do not have access to these methods as we do not use .NET. Are there any methods we can use to disconnect these sql connections?Hi Dean,
Moved to the Legacy Application forums. Likely using the RDC as your report engine.
You should still be able to close and dispose of the report objects. They are not specific to .NET.
In VB it would look something like these lines::
crReport.Close
Set CrystalActiveXReportViewer1.ReportSource = Nothing
Set crReport = Nothing
Once the report is closed it should disconnect from the DB. If you close the application does that disconnect?
Have you looked on 4GL's site for info on how to?
Thank you
Don -
Dunning Letter as Crystal Report: What tables? (SAP B1 9.0)
Dear Experts,
I am being asked to revise the Dunning Letters for our clients. The existing PLDs for each Dunning Letter shows most data fields as system variables. The existing Crystal Report for Dunning Letter 1 is a conversion from the PLD and doesn't show table information for most of the report's main items. There are tables in the report but they are standard ones (OADM, OADP, OCRD, OHEM, OSLP). It also includes a "table" called "PLD__ITEMS" which has all the PLD system variables and no B1 table or field/column information.
As I'm just now starting to work with dunning letters, I see that I can't even run this report in Crystal. The PLD__Items datasource prompts me for a file path and class name. Any ideas what one enters here to run the report outside of B1 (from the Crystal report designer)?
The main focus of my question is: Has anyone created a Crystal Report to replicate the Dunning Letter and if so, what tables are involved and how are they connected? If I can create a Dunning Letter entirely in Crystal, I can replicate it across all clients and get the correct fields/columns of data the clients want. The inclusion of the PLD__Items apparently limits my ability to test the results. I would prefer to avoid the PLD limitations.
Thanks for any assistance.Thank you Nagarajan. I have a dunning letter created in Crystal Reports for our client. It is fairly limited in scope, it just has the customer name and address, invoice numbers and dates, amounts due and the text they wanted in it.
I can import it into B1 9.0 and set it as the default for Dunning Letter #1 and it runs, but unlike other formats where there is a DocEntry and/or ObjectID and a ?DocKey@ or ?ObjectId@ parameter, how do I limit the report to just one customer? Typical document layouts run for the document that's on the screen. In the dunning process, the report runs once for every customer when the Dunning Letter Method is set to "One Letter per BP". I have to limit the report to one customer at a time. Right now, each dunning letter based on the Crystal report is identical and it contains all the data for every customer.
So, does anyone have any ideas for what selection criteria needs to be included in the Crystal report to have it select just one customer from the dunning wizard tables? Thanks.
Michael
Edit: I created a ?WizardID@ parameter and a ?CardCode@ parameter to limit the report to a single dunning wizard event and a single customer. While it works fine in Crystal itself, it doesn't work in B1 at all. I had thought that by limiting the report in this way, it would only create dunning letters for a single customer. -
Exporting Crystal Report to HTML is not working in Windows 7
Hi Sir,
I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
Below is the code to Exporting Crystal Report to HTML in VB.NET.
Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
Dim CrFormatTypeOptions As New HTMLFormatOptions
Dim vFormat As Integer
Dim CrExportOptions As New ExportOptions
Dim vRdReport As New ReportDocument
Dim sfd As SaveFileDialog
Dim vFileName As String = Nothing
vRdReport = vRptSource
sfd = New SaveFileDialog
If Not (vRptPath = "") Then
sfd.InitialDirectory = vRptPath
End If
sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
If sfd.ShowDialog = DialogResult.OK Then
' Set the disk file options.
CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
Else
Return
End If
CrExportOptions = vRdReport.ExportOptions
CrFormatTypeOptions.HTMLFileName = vFileName
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLHasPageNavigator = True
CrFormatTypeOptions.UsePageRange = True
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.HTML32
.DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
.FormatOptions = CrFormatTypeOptions
End With
vRdReport.Export()
Catch ex As Exception
MsgBox(ex.ToString)
End Try
Code working fine at Windows XP, But it is not woking in Windows 7 environment.
Please can anyone share your valuable thoughts or ideas reg. this.
Thanks in Advance
Deivanayaga Perumal D.user13509659 wrote:
Run this code to reproduce the issue.Which issue?
It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
Edited by: jduprez on Feb 10, 2011 1:01 PM -
Print crystal report without using the print button on toolbar
Hi,
I am working on Crystal report XI. I need to print the report w/o using the toolbar. So I have inserted a print icon in the report. On clicking that icon it should call a jsp page which will print the report. I am not able to call any print methods provided by JRC to do this.
Can someone help me with this problem.
Is there some other way to implement it ?
Thanks
Message was edited by:
CR_newbiePrint the report where? On what printer? The server's printer?
Java code runs on the server. You can't affect the client's computer from JSP.
You can write javascript code which can call window.print() but that is working through the browser to display the print dialog box (as if the user selected file:print) -
Performance issue - Open a Crystal Report from SAP BW
Hi,
I have an general question on the performance of Crystal Reports: We are using Crystal Reports 2008 SP 2 in context with SAP BW 7.0. We don't have a BO XI. We use the BW as a central storage for our reports. Now we have the problem that the opening of some reports takes a long time. For expample one report needs ~13 secound an another > 5 minutes.
Where can be the problem? What happens in SAP BW when a report is called? And what can we do to make it faster?
Thanks for your informations!Hi Ingo,
the value of MaxPickListSize is "c8".
Yesterday I have spent a lot of time to find the bottleneck. I have traced the SQL statements, which are performed from Crystal Reports / Integration Kit when I open a report. It might be the values for the parameters. That's our situation:
Crystal Reports
|
Query (restriced on Cube 1)
|
MultiProvider
- Cube 1
- Cube 2
- Cube 3
- DSO 1
The slow report is based on the BW Query and in the filter restricted to the Cube 1. If I open the report, all values for the parameters are read from all the InfoProviders under the MultiProvider (Cube 1, Cube 2 Cube 3 and DSO 1). The very big DSO 1, which is not used, increases the duration extremly. This may not be the desired behavior?! Is this a bug? I would expected that only the values are loaded from Cube 1.
Maybe you are looking for
-
HP Photosmart Premium All-in-One, Model # C309a...Windows 7, 32-bit. A Wireless Network Test Report tell me "The wireless radio is not functioning. Contact HP Support*** ***-Critical: action required Naturally my printer is out of warranty. Has an
-
LSMW updating problem with direct input method
Hi! Using version 4.0.0 of the LSM Workbench from 2001-07-01 on SAP R/3 4.7, I need to update the purchase order text and wanted to use the direct input method. I found a tutorial on SAPTechnical which I followed. All went well, the input data was
-
Strange error: gpib error when using DAQmx
Hello I try to out put a single puls using a counter on a PCI-6602 Board with the attached LabVIEW code. Strangely I get the following error message: "Error 3 occurred at an unidentified location Possible reason(s): LabVIEW: Internal error. Wrong m
-
ClassCastException when saving versioned document
Occasionally I recieve the following error when I save a document using IfsFileSystem.putDocument method. Documents are created as versioned objects with the following code: IfsFileSystem fsAPI = new IfsFileSystem(this.userSession); DocumentDefinitio
-
MVC Applications and ADFS authentication
Hello, I have a requirement to create a MVC.NET application that uses ADFS for authentication. I already have created the project and it works with our ADFS server (On-Premise). Now, the next requirement is that we have an existing application (App1)