Subscription sends double e-mails

Hi all, SAP,
We have a portal user that is subscribed to a discussion.
We don't know exactly what he did, but somehow he managed to end up in a situation where he receives 2 identical mails for this subscription, and for each change that is made to the discussion to which he subscribed.
I already tried to use the "delete subscription" report for this user (Content Administration -> KM Content -> Toolbox -> User level reports), but this didn't solve the problem.
When the user re-creates a subscription on the same disucussion, again, he receives 2 identical mails for each change.
It appears that there is a corruption on the metadata / Database level. (note: we are working in DBFS mode).
Please can someone suggest possible solutions for the problem?
Can anyone tell me how to access the subscription metadata on a lower database / metadata level so I might be able to fix the corrupted subscription manually?
Thank you very much ,
David Pierre
UCB

Very late, but the solution:
Navigate to: "Systemadmin - Systemconfig - Content Management -Global Service - System Landscape Service and mark the Cluster Installation box.
This will help.
best regards
J. Heyne

Similar Messages

Mail sending double e-mails?

I've just noticed that when I send an e-mail, the progress bar show double ie, if I'm sending 1 email it says 'sending 2 of 2'. Does anybody know why?

I have the same issue. Not with all e-mail but most. I host all my own e-mail accounts on my own popserver.
I have scanned for trojans.
Have not heard from anyone that they get my e-mails twice.
If anyone knows what this is about, please let us know.

Can't send attachments in mail since upgrading

Hi-
Since upgrading, I can't send attachements in Mail. The filenames appear all grayed out and they can't be highlighted. In order to attach, I have to open through Finder and drag over into Mail.
What gives?
s

Usability and interface issues with Gmail aside, I did figure something out. (I don't really use Gmail, it just seemed like a good at the time when I was setting up an account for a friend so I could help out with issues.)
I couldn't add attachments to a new message either. In fact, when I clicked the link to add an attachment, the link disappeared. I discarded the message, opened a new one, click the add attachment link, and the link disappeared again.
Turning off the blocking of pop-up windows didn't change the outcome.
So I opened a new message and looked around.
I noticed a little icon in the upper right of the message, just above the To: field, a sort of double square with an arrow in it. It looked almost like icon used on Windows to indicate maximizing the window for full screen, except it had an arrow that looked like the "Forward" arrow when you want to forward a message instead of replying. No tool tip came up so I decided to try it.
This made the message disappear, and popped open a new smaller window which eventually loaded the message. Looked about the same as before but without the rest of Gmail. Curiously, the add attachments link actually worked, without disappearing. A dialog popped open (looked like from the OS, not a browser window) and I was able to select a file. It appeared listed below the subject and above the message, with a progress indicator that took several seconds (half a minute?) before any progress happened. It did eventually get started and completed the upload.

When i send an e-mail out with my iCloud account it does go out but it never arrives at the e-mail address.

I am sending out e-mails from my IMC desktop from my Icloud account. It makes the swooshing sound so it sounds like it is been delievered. But sometimes it never arrives at the e-mail address. I double checked the "sent addresses" and they are correct. What is going on here? Thank you

I have same problem, but on iCloud.com site.
When i send email, then person whom i send it dont get it, befor i thought it is problem with my iphone but eaven from iCloud.com dont recive. i have tried to send email with iPad, iPhone macmini and all of them have same problem 5 to 10 times in day. some times helpes bbc to my self but not all the time.
i see these emails on sent folder, even if i send from macmini then i see them on icloud.com but not on address where i sent them.

Double push mail notifications

Hallo, I am only able to receive gmail-mail notifications if I select both 'Inbox' (default) and 'All Mail'. But now I am receiving two notifications for every mail. Any tips? Just to make sure, I don't revieve any notifications is I do not select 'All Mail'.
Sander, Haarlem, The Netherlands.

I think I found the answer on here. I went to SETTINGS > MAIL, CONTACTS, CALENDAR > MAIL (the actual name of the account with the double alerts) > MAIL FOLDERS TO PUSH > Then I selected INBOX and SENT ITEMS only!!
I tested it by sending an email from an account not synced on my iPhone and only ONE ALERT came through!! OMGoodness - so much less annoying!!
Thanks to you all and I hope other will benefit from this post!! God Bless!

EVERYtime I click "send" or "get Mail", I have to click twice. The 1st time with "send" produces an error, the 1st time with "get mail", nothing happens.

I have to select "send" or "get mail" twice in order for Thunderbird to do what I want. When I click the 1st time when sending, I ALWAYS get an authentication error. I click again and it sends the message without error. When I click "get mail" nothing happens. When I click it again, it checks & retrieves mail.

That sounds like an anti virus issue.
Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX] and see if the double clicking stops.

User two cannot send email from mail app. (send icon just spins)

userone can login, use Mail to send and receive.
user two login and may receive, but not send email in Mail app
icon next to send paper airplane in folders window just spins.
able to send email thru facebook, etc.
also, recently did TDM backup into this iMac of G5 HD.
how do I access address book data from backup

resolved part one: played around with mail preferences of user two to match prefs in user one
still do not know about access to TDM saved addressbook data.

Cannot send Email with Mail since updated to 10.7.2, they stay in my Send Box...

Since I updated, I cannot send Email through Mail, it works with Thunderbird though.

Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app. I could get emails into the account with no problem but couldn't send. I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success. Then last night, it just so happened that my broadband provider had to change out my wireless modem. As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work. So I think people need to look at their router settings for the a solution to the problem.

TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
Message is " A copy has been placed in your
Outbox. Sending the message content to the server failed."
Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
Address is fine etc.

How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

Keyboard shortcut for sending messages on Mail suddenly stops working

I've created a keyboard shortcut (Command + Return) specifically for sending manssages on Mail. When I open Mail, this keyboard shortcut works perfectly but suddenly it stops working.
If I close and reopen Mail, the keyboard shortcut starts to work again, but for a while.
I'm using OS X 10.9.1 and Mail 7.1 (1827).

Howdy Guilherme
Give this a try if you haven't already.
System Preferences
Keyboard
Shortcuts
At the bottom of the left panel go to:
App Shortcuts
If Mail.app isn't there, add it.
Under it add Send.
Now choose your key combo i.e.
⌘↵
Worked for me mail Version 7.1 (1827) running OS X 10.9.1.

Can you send encrypted e-mails using SO_NEW_DOCUMENT_ATT_SEND_API1

We use SO_NEW_DOCUMENT_ATT_SEND_API1 to send e-mails to employees for various notifications. The e-mails go out through SCOT and are sent to our lotus notes.
We have a project being implemented, where the data we are sending in the note is kind of sensitive, so we'd like to see if we could send the e-mail as encrypted.   Does anyone know if there is some parameter we can set upon sending that would encrypt the text in the e-mail for sending?

FORM pssword_prot_encryptpdf .
DATA: BEGIN OF command_list OCCURS 0.
          INCLUDE STRUCTURE sxpgcolist.
DATA: END OF command_list .
DATA: BEGIN OF exec_protocol OCCURS 0.
          INCLUDE STRUCTURE btcxpm.
DATA: END OF exec_protocol.
DATA: status LIKE btcxp3-exitstat,
commandname LIKE sxpgcolist-name VALUE 'ZTEST',
sel_no LIKE sy-tabix.
* GET LIST OF EXTERNAL COMMANDS
CALL FUNCTION 'SXPG_COMMAND_LIST_GET'
    EXPORTING
      commandname     = commandname
      operatingsystem = sy-opsys
    TABLES
      command_list    = command_list
    EXCEPTIONS
      OTHERS          = 1.
CALL FUNCTION 'SXPG_COMMAND_CHECK'
    EXPORTING
      commandname                = command_list-name
      operatingsystem            = sy-opsys
    EXCEPTIONS
      no_permission              = 1
      command_not_found          = 2
      parameters_too_long        = 3
      security_risk              = 4
      wrong_check_call_interface = 5
      x_error                    = 6
      too_many_parameters        = 7
      parameter_expected         = 8
      illegal_command            = 9
      communication_failure      = 10
      system_failure             = 11
      OTHERS                     = 12.
CLEAR command_list.
REFRESH command_list.
DATA: v_dir_input      TYPE sxpgcolist-parameters.
DATA: v_dir_input1      TYPE sxpgcolist-parameters.
break developer.
command_list-name = 'ZTEST'.
command_list-opsystem = 'Windows NT'.
CONCATENATE   'd:\pdf\' main_dtl-vbeln '.PDF' INTO name.
CONCATENATE 'cmd /c d:\pdf\encryptpdf.exe' '-i' name '-o ' name '-u' hdr-password INTO v_dir_input SEPARATED BY space .
READ TABLE command_list INDEX sel_no.
break developer.
CONCATENATE command_list-opcommand v_dir_input INTO command_list-opcommand SEPARATED BY space.
* CHECK AUTHORIZATION
command_list-addpar = 'X'.
APPEND command_list.
CONSTANTS: c_extcom    TYPE sxpgcolist-name VALUE 'ZTEST',
             c_oper      TYPE syopsys VALUE 'Windows NT'.
DATA: t_result         TYPE STANDARD TABLE OF btcxpm.
v_dir_input = command_list-opcommand.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
    EXPORTING
      commandname                   = c_extcom
      additional_parameters         = v_dir_input
      operatingsystem               = c_oper
    TABLES
      exec_protocol                 = t_result
    EXCEPTIONS
      no_permission                 = 1
      command_not_found             = 2
      parameters_too_long           = 3
      security_risk                 = 4
      wrong_check_call_interface    = 5
      program_start_error           = 6
      program_termination_error     = 7
      x_error                       = 8
      parameter_expected            = 9
      too_many_parameters           = 10
      illegal_command               = 11
      wrong_asynchronous_parameters = 12
      cant_enq_tbtco_entry          = 13
      jobcount_generation_error     = 14
      OTHERS                        = 15.
ENDFORM.                    " PSSWORD_PROT

HT3228 I set up my work e-mail on iphone. When I try to send an e-mail, an error code says "Cannot Send Mail", "recipient rejected by server because it does not allow relaying". What does this mean and how do I correct it?

I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?

Get the correct mail server settings from your IT department.

I am being asked to verify my Apple ID. When I enter the password I get the message it is wrong. It says the e-mail address is already verified for another Apple ID and then it says it is sending an e-mail to my e-mail account that I then never receive.

I am being asked to verify my Apple ID. When I enter the password I get the message it is wrong. It says the e-mail address is already verified for another Apple ID and then it says it is sending an e-mail to my e-mail account that I then never receive. How do I resolve this?

This is most likely caused by an iCloud sign up (which forces you to use an email address as Apple ID).
Here's the workaround fix I found after some online research:
https://discussions.apple.com/thread/3656336

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

I forgot my password along with the answers to my security questions. So I try sending an E-Mail to myself but the E-Mail I am sending it to isn't even mine, nor the one I have registered. How can I change the E-Mail or something?

I forgot my password along with the answers to my security questions. So I try sending an E-Mail to myself but the E-Mail I am sending it to isn't even mine, nor the one I have registered. How can I change the E-Mail or something?

Security questions:
https://discussions.apple.com/thread/4533485?tstart=0

Subscription sends double e-mails

Similar Messages

Maybe you are looking for