Subscription Tile Error and Social Sharing Questions

Hello,
I recently had my free subscription DPS app rejected by Apple with the following message:
"When the user taps "subscribe" an activity indicator is displayed for a moment and then no further action occurs. The subscription fails."
When I go back through my work, it looks as though the problem may be linked with leaving "Optional Library Subscription Tile URL" field blank in the App Builder. Is this correct? Do I need to create a webpage specifically to complete the subsciption process? I haven't been able to find any specifics regarding this in the Adobe Publishing Companion Guide.
Also, regarding social sharing, is there any more information you can provide regarding setting up a URL scheme to launch the viewer app? Does this need to be an actual functioning webpage?
Thanks!
Darin

No, subscription failure is not because of the Optional URL scheme. Subscription failure and reason for Apple's rejection can be either or both of the following reason
You have not copy pasted your shared secret key into the application account of your app using the Admin dashbaord panel
Your free subscription product from the app(viewer builder) does not match the Free subscription in-app purchase on iTunes connect.
Regarding the optional URL scheme here's a good blog post from Bob
Message was edited by: Lohrii Alo

Similar Messages

  • Creating bookmarks and social sharing

    Hello everyone,
    I'm trying to find out which version of DPS you need to enable bookmarks and social sharing? We currently have single edition and I think I read somewhere that you can only enable those features within a multi-folio, but want to double check that as I can't find the source I read that from. Thank you.

    That's correct. Professional and Enterprise publishers can enable bookmarks and social sharing in multi-folio apps.

  • App Builder HD Subscription Tile error?

    I am updating our current app to v25. I am replacing the new subscription tiles in App Builder. I am getting an error when I attempt to load the iPad HD Portrait Subcription Tile.
    I am able to successfully replace the other subscription tiles, but just not this specific iPad HD Portrait Subcription Tile.
    I have double checked the tile size for HD (1416 x 500), re-created this in a fresh InDesign file, saved as a .png, re-started App Builder but still get an error.
    Am I missing a step?
    Tom

    screen shot here:
    hovering over this it states, "Portrait tile must be 1416 x 500 pixels and PNG format."
    This is exactly the file size and format that I am trying to upload. All other subscription tile artwork loads without a problem.
    Screen shot of photoshop settings:
    Screen shot of Save For Web:
    any ideas on what's going on?
    Tom

  • Single Folio Apps:  No Bookmarks and Social Sharing

    I was just reading on DPS Help that Single Folio Apps don't support Bookmarks or Social Sharing.  Does that mean that if I have Bookmarks linking to pages within my folio, they won't work?  I know it looks like my question is answered in first statement, but I'm really hoping I'm not understanding something. 
    I have Hyperlinks in my TOC linking to bookmarks in the folio.
    I don't know what Social Sharing exaclty is, so I don't think it'll affect me.
    Thanks

    The term "bookmarks" means two different things in InDesign/DPS. There is the bookmarks feature in InDesign that links to other parts of the document when you view a PDF document, and there is the bookmarks feature in DPS in which you can add your favorite articles to the list of favorites. The PDF bookmarks aren't supported in DPS. The DPS bookmarks ("favorites") feature is supported. Here's a description.
    BookmarksIf you enable bookmarks in Viewer Builder, customers can mark an article as a bookmark and then choose that bookmark from a drop-down menu in the nav bar to jump to the bookmarked article. Bookmarks work across multiple folios within the same viewer app.
    The Social Sharing feature is the ability to use social media to share articles through facebook, twitter, or email so that they can be read on a computer or a device. You can read about it here: http://helpx.adobe.com/digital-publishing-suite/help/using-social-sharing.html
    When you say that you have hyperlinks in your TOC linking to bookmarks in the folio, what kind of bookmark are you referring to?

  • Viewer Builder Error - SD Portrait Subscription Tile error

    I am in the process of moving the first of our Apps to the news stand following Bob Bringhursts Adobe Developer Connection Article - Adding DPS apps to Apple Newsstand.
    At the point where I am asked to add Landscape and Portrait Subscription tiles I can locate and add the Landscape Tile - OK no problems so far
    I locate and add Portrait tile 331x180 pixels I created and select image but I dialog box is highlighted red and red pop up error - "This tile must be331 x 180 pixels and PNG format".
    I have double checked image file and it is 331x180 pixels in PNG format with PNG file extension.
    I have created using Photoshop a new 331x180 pixel PNG file and get the same error with this file.
    Can get past this point to build the App for submission to Apple
    What am I doing wrong?

    Bob,
    Got confused and had the image orientation wrong 180 x 331 pixels as
    opposed to 331 x 180 - the Portrait Tile is actually short and wide
    (landscape).
    As soon as I flipped the orientation I was able to upload the image and
    sucessfully build the App. The App is now in the Aople queue.
    Thanks for your help

  • Snow Leopard and Screen sharing question

    I followed the information in this article to use screen sharing between 2 SL computers and I can make the basic SS work.  However, two items from this article don't function as described.  It is an older article and I'm asking to see how it still applies to Snow Leopard users.
    http://www.macworld.com/article/131094/2007/12/screensharepower.html
    One item that doesn't seem to work is Bonjour Browser window.  Launching screen share doesn't automatically launch Bonjour Browser.  This is a small incovenience but it means I launch BB manually then cut and paste a device address from BB to SS.
    The second item is the terminal command to add additional items to the basic SS toolbar such as the button to capture the remote screen to a local file.  I've tried it but the additional buttons don't appear.  Are their other commans I could use to locally capture a screenshot from the remote machine to my computer?
    Are either of these features compatible in Snow Leopard?  If yes, how could I trouble shoot my setup to find out why an item isn't functining as described.
    Thanks!

    What did you do to make it work?
    In my setup, I am facing pretty much all the issues I saw on the forum around screen sharing. So from a Snow Leopard iMAC:
    1. I can't even get the black remote screen when trying to get access to another iMAC 10.6.1 system. In most of the case the connecting window stays on for about 1 min and than closes; the screen sharing application shows nothing connected. Once or twice I got a black remote screen and once I think it did work well. Tens of times it just did not connect. Console messages show errors with NetAuthAgent (even that file sharing and screen sharing are enabled on the remote Snow Leopard system and the file sharing was fine but connection is slower than with leopard).
    2. I can connect to a Leopard system but takes almost a minute to connect. I can access Leopard regardless of the screen sharing options and I never get a black remote screen.
    All systems are in a LAN. Before Snow Leopard upgrade the screen sharing connection was instant on all systems.

  • Solaris Cluster and VMware Disk and SCSI Sharing Questions

    Hello folks,
    Does Solaris Clustering support the following?
    Oracle Solaris 11 Cluster support shared disk using VMware 5.1 RDM?
    Oracle  Solaris 11 Cluster using VMware SCSI Bus Sharing? (although VMware doesn’t support this)
    Best,
    Dave

    Hello folks,
    Does Solaris Clustering support the following?
    Oracle Solaris 11 Cluster support shared disk using VMware 5.1 RDM?
    Oracle  Solaris 11 Cluster using VMware SCSI Bus Sharing? (although VMware doesn’t support this)
    Best,
    Dave

  • Social Sharing Links not working in v26

    We recently rebuilt our application from iPad only in v25, to Universal with v26 to enable the web-viewer. In our v25 version, our social sharing was setup and worked perfectly. For some reason though, now that we have the v26 version, all of our sharing links go to our redirect URL only.
    I've seen some issues on the forum related to renditions and naming. Has anyone experienced this? I've double checked and social sharing is enabled in the App Builder and in the Account Admin area. We are using WoodWing to publish so everything is and was unprotected by default. Below is one of the URLs that it is providing:
    http://millennialeye.com?wv=s%2FMillennial%2520Eye%2F13e831a3f9a54b87a0d0669b4a9697d5%2Fco m.brynmawr.millenialeye.ipad%2F114.html

    Bob, I believe the problem is if I have added a Hosting URL for the Web-Viewer it automatically sets the Social Sharing links to this URL.
    My question then is, does adding or removing a Hosing URL from the Configure User area require an app rebuild, or will the change be reflected in the live app once the changes hit the server?
    Thank you,
    Nik

  • Error message about firewall and internet sharing

    hello all i have a question regarding the use of firewall and internet sharing.
    I have a PMG5 connected to internet through Airport. I've linked an Xbox 360 via the built-in ethernet port in order to access Xbox Live. I had to open specific UDP ports on the OS X firewall but it now works fine. However, in the Sharing Preference Pane, Internet Tab, i still get an error message saying that my Internet Sharing is disturbed by the settings of the firewall and sharing services, it says that i did not activate "personal web sharing" in the first two tabs...but i DID ! And there's no way to get rid of this error message.
    I know I know some may consider it's not a real problem because it's just an error message while the connection actually works fine but well, I tend to hate error messages when they're not supposed to show up. So if anyone know the answer, thanks in advance...
    Good day to everyone
    Vince, Paris...

    sorry about the delay in replying, was kinda busy
    well trashing the pref files was useless and i tried with another user, same thing. As for the second opinion, the problem was not about which port was used cause as i said the connection sharing works fine and anyway it was the correct port that was checked, it's just that i get an error message while there is no apparent error and everything works fine, i'm told that personal web sharing is not enabled but it is...
    Anyway as i said, it's probably not a real matter, as long as it works...which brings me to another thing. I've created a special protocol in the firewall to enable a proper dialog with the xbox. it's basically the same thing you do for ichat AV when you have video connection problems, you track down the concerned UDP port using terminal, you allow traffic and all... The protocol for the xbox worked great for some days, but now it seems it's not enough, the game set keeps trying on another port and i constantly have to update the protocol or deactivate the firewall...and enabling back all UDP traffic is not enough to solve it.
    In a way i think everything is linked, the initial error message when everything was fine and the current trouble. Any idea?
    thanks
    Vince

  • Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

    Hi Gurus,
    I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
    OS: OEL5 32 bit
    oifcfg iflist
    eth0 192.168.2.0
    eth1 10.0.0.0
    oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth1 10.1.1.0 global cluster_interconnect
    eth0 192.168.2.0 global public
    cat /etc/hosts
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    My questions are:
    should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
    if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
    Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
    Edited by: ayyappa on Aug 20, 2009 10:13 AM
    Edited by: ayyappa on Aug 20, 2009 10:14 AM
    Edited by: ayyappa on Aug 20, 2009 10:15 AM

    a step forward towards resolution but i need some help from the gurus.
    root# cat /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    root# /u01/app/oracle/product/crs/bin/oifcfg iflist
    eth1 10.0.0.0
    eth0 192.168.2.0
    root# /u01/app/oracle/product/crs/bin/oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth0 191.168.2.0 global public
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    ****ORACLE_HOME environment variable not set!
    ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
    root# export ORACLE_BASE=/u01/app/oracle
    root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
    root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
    root# export PATH=$PATH:$ORACLE_HOME/bin
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP does not exist.
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
    VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
    Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
    My questions to the gurus are as follows:
    Should ping on vip work? It does not work now.
    srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
    VIP is not running on node: sunny1pub
    GSD is not running on node: sunny1pub
    PRKO-2016 : Error in checking condition of listener on node: sunny1pub
    ONS daemon is not running on node: sunny1pub
    [root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
    Name Type Target State Host
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

  • Facebook social sharing - login failed error

    I have setup my app for social sharing following the http://helpx.adobe.com/digital-publishing-suite/kb/setting-dps-app-social-networking.html instructions
    However, when I test my development app, whilst it allows me to select Facebook from the social sharing drop-down, and gives the option to allow Facebook to access my basic profile info and list of friends, once I have done this, I then get the following error message:
    "Login Failed. Please log in to Facebook and authorize "app name" through the iOS device settings or through the Facebook iOS application".
    I have also found I get the same error when I try to share from other downloaded 3rd party newsstand publications - though not all of them?  So am not sure whether this is something to do with:
    1. how I've configured  social sharing in my app (and if so, then  other publications have also incorrectly configured theirs)
    2. the settings on my own iPad - although these all seem to be in order, my app name doesnt appear in my Facebook settings to enable me to authorise login
    On previously speaking with Adobe Support - I understand that I only need to register an app with Facebook to get an App ID, rather than fully create a Facebook app and get this approved (A process which I understand takes months?)
    On re-reading the instructions, I have not yet completed the additional suggested Facebook SDK configuration "Implement Single Sign-On (SSO)" via XCode. Just wondering before I embark on this if this is actually the issue?
    Would be very grateful for any advice/clarification on the above
    Many thanks

    I tried a few things, but I'm not entirely sure exactly which of them resolved it:
    1.   I began by starting  the "Implement Single Sign-On" instructions by following the links at the bottom of the Adobe instructions page under "Additional Facebook configuration information"
         http://helpx.adobe.com/digital-publishing-suite/kb/setting-dps-app-social-networking.html
         https://developers.facebook.com/docs/tutorials/ios-sdk-tutorial/#implementsso
         https://developers.facebook.com/docs/getting-started/facebook-sdk-for-ios/
         I completed steps 1 - 5 on the last link - but stopped at the step 6 - start coding - as this got a bit beyond me (I'm not a programmer!)
    2.  I then looked back at the settings in the Facebook app, and under permissions, changed the Default Activity Privacy to Public, and the Auth Token Parameter to URI Fragment (#acces_token=...)
    I would perhaps try adjusting your FB settings first and see if this solves it before trying the Xcode route.
    (I fed my findings back to Adobe Support to see if they could shed any light on this, but heard nothing back).
    Please let me know how you get on and if this works for you
    Kind regards
    Sharon

  • Family sharing question-after we updated to family sharing, and I have a new apple id, I have found that all the pages documents on my iPad are only accessible if I sign in via the original apple ID- now my husband's( the primary user). is there an e

    Hi there,
    this is a Family Sharing question. After we upgraded to family sharing, and I now have a new apple id, I find that all the documents on my iPad in pages,  are only accessible if i sign in with the original apple id- now my husband's ( he is the primary account holder). Is there an easy way to migrate these documents to my iCloud account, or do i need to email them to myself . There are a couple of hundred documents.
    Many thanks in advance.

    Thankyou for the reply.
    No. I have tried twice. When I turn off pages in the iCloud settings while logged into his account, then my documents in pages just are gone. They return when I turn it back on.
    Is there another way I can save them to the device?

  • My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

    My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
    That's why i am interested on anyone's help.

    Welcome to the Apple Support Communities
    I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
    If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

  • I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

    I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

    Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
    You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

Maybe you are looking for