Subscriptions for fimware/software new releases, bugs and fixes

Hi,
Where can I subscibe for MDS 9000 Firmware/Software releases, bugs and fixes?
Thanks,

You have the "Cisco Notification Service" tool where you can setup a profile:
http://www.cisco.com/en/US/customer/support/tsd_most_requested_tools.html
- Filiph

Similar Messages

HT1491 I purchased a year subscription for Huffington Post Magazine $19.99 and when I go to the Newsstand and try to read the latest issue it tells me I have to pay $0.99?

I purchased a year subscription for Huffington Post Magazine $19.99 and when I go to the Newsstand and try to read the latest issue it tells me I have to pay $0.99?

They are only free via the account orginally purchased or if they came pre installed on the computer. Depending on what you have purchased already us the one account for the app store - saves headace and hassel in the future thus not double buying software. Do you have iwork installed on your imac? meaning the iwork 09? if you do your should be able to to to the store and update it. Worked fine for me since i bought the DVD version of iwork 09 and Aperture 3. I did not want to have to rebuy them so the app store noticed i had them installed and changed the update via the app store.

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

[svn:fx-trunk] 11664: Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as

Revision: 11664
Author:   [email protected]
Date:     2009-11-11 11:42:00 -0800 (Wed, 11 Nov 2009)
Log Message:
Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - Checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/dataGridClasses/MXDataGridItemRe nderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/listClasses/MXItemRenderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/treeClasses/MXTreeItemRenderer.a s
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Range.as

Revision: 11664
Author:   [email protected]
Date:     2009-11-11 11:42:00 -0800 (Wed, 11 Nov 2009)
Log Message:
Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - Checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/dataGridClasses/MXDataGridItemRe nderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/listClasses/MXItemRenderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/treeClasses/MXTreeItemRenderer.a s
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Range.as

ACR 7.x known bugs and fixes

Since Adobe stopped supplying Camera Raw downloads, I've noticed that it's become harder to track bugs and fixes. Hopefully, someone here can put me straight on the current state of play.
Can anyone summarise the well-known problems with version 7, and when they were fixed (or are still ongoing)? Is there a 'changelog' somewhere? What is/are the main outstanding issues at the moment?
Unfortunately, I'm getting to that age where my short–medium term memory isn't very good at retaining this sort of information, so it's good to have it written down!

Jeff,
I have been dealing with this since November. Steve G knows about it but hasn't had time to do anything. Here's the deal...I am on Windows 7 and Photoshop CS6. I shoot with a Canon 7D and G11. I do all my initial work in the metadata template...my own info, description, keywords, location, etc. etc. This creates an .xmp file. When the update from RAW 7.2 to 7.3 came through in November, I downloaded it, as I have all other updates. Then, suddenly, all images in folders with RAW files that had ANY metadata applied, would regenerate endlessly. This only happens with RAW files, not with folders containing jpegs or tifs.
I tried resetting preferences. I tried creating new folders. I have asked if this problem is seen with Nikon RAW files and I'm not sure there has been an answer. I think people have recreated this even with DNG files tho I am not sure. I do know that someone in Adobe has recreated it.
I then discovered that previous .8bi folders were no longer readily available. Getting to one is way, way, way above my ability and involved all kinds of ridiculous backflips but I finally got one. Then followed a solid week of me trying replace the 7.3 .8bi file with the 7.2. Of course, with no instructions, I was putting the wrong file in the wrong folder (32 bit and 64 bit). When I finally got THAT straightened out, it still didn't work. It took someone at Adobe taking over my computer to successfully revert to 7.2.
I lost hours and days of work time trying to deal with this. Meanwhile, should I buy a new camera, I won't be able to see my own RAW CR2 files and will, instead, have to convert to DNG, which, frankly, I find to be a royal pain. Am I peeved. You bet I am. I've been asking, pleading, begging for something to be done since November. Some thoughtful soul suggested I try updating to 7.4 to see if it fixed the problem (the 'fixed problems' listed for 7.4 does NOT mention the recalibration). You can understand, after the problems I had in November, why I will NOT do this until I am absolutely sure the current, latest update has fixed my problem. And I will NOT spend another two hours on the phone with adobe alleged tech help to finally get someone in India who doesn't know what I am talking about. This forum has been far more helpful but please underestand, I am an old school film photographer who has had my share of problems understanding this digital stuff and mucking around with the basic technology of my computer only leads to horrifying outcomes for me.
Jeff, are you with Adobe? Can you look into this?

[svn:fx-trunk] 5114: Fix FxRadioButton doc bug and fix the bug fix I messed up yesterday.

Revision: 5114
Author: [email protected]
Date: 2009-02-27 12:50:47 -0800 (Fri, 27 Feb 2009)
Log Message:
Fix FxRadioButton doc bug and fix the bug fix I messed up yesterday.
QE Notes: mustella gumbo/RadioButtons passed
Doc Notes:
Bugs: SDK-19475, SDK-19531
Reviewers:
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19475
http://bugs.adobe.com/jira/browse/SDK-19531
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxRadioButton.as

FF has become useless and nothing but bugs and fixes

Comment, <br /> See also similar question with some answers
* '' 'save as' redownloads the data '' [/questions/986667] ~J99
you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double.
while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function
FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7,
the repeated crashes are well known without a fix,
the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function.
the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data.
Every since that Tor / FF debacle when the old versions were declared no good every version of FF since then has had to many errors without fixes that it has became an industry joke. The fact that chrome and IE or better browsers now speaks volumes. I am no code writer, but since that time, every version is so slow and bug prone, that what ever attempt to say face or redemption has been a disaster.

To answer your questions here:
<blockquote>you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double. </blockquote>
I'm not sure I understand this. When I click save image as then try again it works fine for me. Can you clarify what you are trying to achieve?
<blockquote>while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function </blockquote>
It is better to use an external Download Manager (DM) if you are on dialup or have an unreliable connection.
An external Download Manager offers better support for resuming interrupted downloads than the built-in Firefox DM.
You can use the FlashGot extension to integrate an external Download Manager in Firefox.
FlashGot: https://addons.mozilla.org/firefox/addon/flashgot/
<blockquote>FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7, </blockquote>
This is most likely the way Firefox is set up on your end. What add-ons are you running since I don't see any listed. I need some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
<blockquote>the repeated crashes are well known without a fix, </blockquote>
Again this is specific in your case. Follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.
[[Image:SubmittedCrashReports-Win7|width=520]]
<br><br>
<blockquote>the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function. </blockquote>
I see you have Fx 26 installed and not the latest 27.0.1. See what's new with Firefox in version 27.0.1 http://www.mozilla.org/en-US/firefox/27.0.1/releasenotes/
<blockquote>the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data. </blockquote> Double data usage? Are you talking about a smart phone data limit or your RAM usage?
<blockquote>Every since that Tor / FF debacle when the old versions were declared no good every version of FF since then has had to many errors without fixes that it has became an industry joke. The fact that chrome and IE or better browsers now speaks volumes. I am no code writer, but since that time, every version is so slow and bug prone, that what ever attempt to say face or redemption has been a disaster. </blockquote> Tor and Firefox? What are you talking about?

Master Pages and Buttons - Bug and Fix Request

I think I'm the only person in the world who has encountered this bug, and I've filled out the bug report form on the Adobe site twice in a couple of years.
Just wondering if anyone else has encountered it, and I'm curious to know if it still exists in Creative Cloud (I'm still using CS6). However, I think this bug appeared in CS5.5, prior to that, results were as one would expect.
So here's the gist of it . . .
Prior versions of InDesign allowed you to put a button on a Master Page, then upon export to PDF the page number would be appended to the button name. CS6 appends random numbers to the button names on export. (It seems the number appended to the button names is the instance count of the button in question.) This problem becomes incrementally worse if you use different combinations of master pages, some with buttons and some without.
Steps to reproduce bug:
Create a button, named "menubutton" and add it to a master page
Apply that master page to 10 pages.
Export the ID file to PDF enabling buttons and interactive elements.
Check the button names in the PDF from Acrobat
Results:
In CS6, this now appends the page number, and an arbitrary number to the button name. CS6 results are like such: "menubutton.Page 1", "menubutton.Page 21", "menubutton.Page 32", "menubutton.Page 43", etc.
Expected results:
The button names should become "menubutton.Page 1", "menubutton.Page 2", "menubutton.Page 2" , etc. (As in prior ID versions)
The problem becomes a lot worse when you use combinations of master pages . . . for example:
Master A – contains one button – menubutton
Master B – contains one button – otherbutton
Apply those masters to alternating pages, like below and export to PDF, this will be the crazy result:
Page 1 (A)        “menubutton.Page 1”
Page 2 (B)        “otherbutton.Page 2”
Page 3 (A)        “menubutton.Page 31”
Page 4 (B)        “otherbutton.Page 41”
Page 5 (A)        “menubutton.Page 52”
Page 6 (B)        “otherbutton.Page 62”
Page 7 (A)        “menubutton.Page 73”
Page 8 (B)        “otherbutton.Page 83”
So, can anyone else attest to this? It makes scripting buttons incredibly hard!

Hi johnjohn123,
1. I would definitely make a copy of the EnterpriseWiki.aspx page layout and make changes to that. You can then set your pages to use your custom page layout. Typically, I provision these via Visual Studio and a module for uploading them to the SharePoint
master page gallery.
2. For the master page, the html version is new to 2013 and is meant to simplify branding, however, it's not required. You can still work within master pages and provision those via features if you'd like. The key is to create your own master page and never
modify the default.
If you need code samples for any of the above, let me know and I can supply it.
Shereen Qumsieh http://sharepointdeveloperhq.com @msshushu

Small bug and fix starting SQL Developer on Mac OS X

I couldn't find anyone else mentioning this so I'll write it in.
If I started SQL Developer in one user I couldn't start it again in another user, even after quitting out of the first. I would double click the icon and it would do the animated "zoom" but then nothing.
I tracked it down to a problem in SQLDeveloper.app/Contents/MacOS/sqldeveloper.sh. When it redirects the output of the call to the start scipt in the /sqldeveloper/bin directory it would fail because the /tmp/sqldeveloper-startup.log was owned by the first user to start the App (since the /tmp was cleared anyway). My umask didn't give it permission to start overwriting that file.
To fix it I changed the last line in SQLDeveloper.app/Contents/MacOS/sqldeveloper.sh to:
bash ./sqldeveloper >/tmp/sqldeveloper-startup.$$.log
so that the PID was now part of the name and each initiation of SQL Developer would have its own.
You could also change the last line to:
bash ./sqldeveloper >$(mktemp /tmp/sqldeveloper-startup.log.XXXXX)
which would guarantee more uniqueness but wouldn't let you know which process was using the file.
Savvy Mac users can edit the script themselves by right-clicking on the SQLDeveloper.app and selecting "Show Package Contents". You may have to temporarily change the file permissions to let you edit it.
For the record I'm running SQL Developer 1.2.0 on a Mac TiBook G4 867MHz with Mac OS X 10.4.10 and 1Gb RAM (and it is still maddeningly slow because Java fundamentally sucks).
-Bion

Ok - I think I found it.
Go into ~/Library/Application Support/SQL Developer/system1.5.3.57.83/o.ide.11.1.1.0.22.49.44 (or similar for whatever version you're running) and edit the settings.xml file there.
Look for a block that looks like:
<Item class="oracle.javatools.util.Pair">
<first class="java.lang.String">delete-previous</first>
<second class="oracle.ide.keyboard.KeyStrokes">
<data>
<Item class="javax.swing.KeyStroke">[0]</Item>
</data>
</second>
</Item>
and change it to:
<Item class="oracle.javatools.util.Pair">
<first class="java.lang.String">delete-previous</first>
<second class="oracle.ide.keyboard.KeyStrokes">
<data>
<Item class="javax.swing.KeyStroke">[8]</Item>
</data>
</second>
</Item>
I'm not sure why, but this file seems to always contain the incorrect keystroke value when I do a fresh install of SQL Developer. I always have to go in and change that value by hand. I've tried choosing any number of the accelerator presets, but none of them make the delete key work.

CS language pack for certain software components (release 604)

Hello SAP friends,
I'm installing Czech language on our system and have found two packages with corresponding software components, so the system is mainly translated now, however there are still some components not translated.
Namely these:
EA-APPL
EA-GLTRADE
EA-HR
EA-PS
EA-RETAIL
ECC-DIMP
FI-CA
FINBASIS
INSURANCE
IS-CWM
IS-H
IS-OIL
IS-PS-CA
LSOFE
SAP_APPL
SAP_HR
SEM-BW
All release 604.
I haven't found any packages in the SAP note 330104. So is there a possibility to translate these packages, or is upgrade needed?
Thanks for help in advance.
- Stefan

Hi,
Please kindly check the SAP note 1402868.
This note refers to language on EHP4.
After the EHP, some packages are delivered, and for those packages, the
Language Supplementation is required.
Please refer to the sap attached note 330104.
This note explains about the packages that need supplementation after
the EHP.
Regards,
Paul

Windows Media Player, since installing Firefox 4 I cannot click on a link in my website to play a video. I have gone through the procedure for downloading the new plug in and it still won't play this is the link I downloaded from

http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download
I then shut down firefox and tried again the video is enbeded in my website as an .asx file. It concerns me that others cannot see it either.
It is also a link in my email
It was fine in previous version of firefox

Sorry to hear about your problems. For a long time I and a colleage were having an issue with our MBP's. When we closed the lid, we thought it was going to sleep, then and hour later when you opened it, it would be all hot and the battery was drained etc. Turns out it wouldn't go to sleep. For a while we remedied the problem by going to the apple menu and hitting sleep then shutting the lid, but after some process of elimination, it turned out that a little freeware app called Desktopple that we used in presentations and etc. . . was the culprit. as soon as I took that app off, Both of our machines started sleeping like babies!!!
Morale of the Story! Sometimes it's a 3rd party app causing the problem.
Desktopple worked fine until one of the OSX updates happened, then it started causing this problem. My suggestion is that you disable these small freeware type apps one by one until you find the source of the problem.
I have a hard time believing that you were given 3 lemons in a row. It's gotta be something that your running.

When I got this itunes and supposed to sync I cannot get on my wifi on iphone, wish I could get my money back for extras all new to me and need to sync plus my isp keeps going off today

I paid twenty four ninety nine each line for this apple id and genius stuff now nothing works! I wish I could get a refund and do like on computers and do a system restore on my iphones along with getting refund!

My Wi fi was working fine until I went to this! the email I used for my husbands account is only on big PC not on laptop that accesses my printer!
I did use my email as a rescue for his but I just am sick at heart! I may as well have burned fifty bucks, absolutely will not let iphones on wi fi until sync and can't get to sync!

OS 10.4.9 freeze bug and fix

My Intel Xserve (10.4.9) had a freeze which disabled the keyboard and mouse after searching for a non-existent file from the keyboard attached to it. Keyboard and mouse remained disabled after forced power downs and reboots. I rang Apple and they advised starting from the install DVD (see - http://docs.info.apple.com/article.html?artnum=75489). Do not install anything but select the normal start-up OS and restart.
I understand that the cause is a known bug affecting Mac OS X Server 10.4.7, 10.4.8 and 10.4.9 with 2 GB or more of memory. Apple advise that until a new OS is released users can either reduce memory or apply the patch detailed on - http://docs.info.apple.com/article.html?artnum=305167
Xserve Mac OS X (10.4.9)

As an aside, in my experimintation with the OS9.2.2<->10.4.9 problem, using the old limited version of Shareway IP...
http://www.opendoor.com/shareway/
that came with my PM/6500, I find that I can GET files on either Mac from the Other, but cannot PUT files on the other without OS9 freezing, and OS10.4.9 locking up until the OS9 machine is reset... seems the problem is one way!
Copied 240 MB files from the other machine either way, but trying to copy from the machine in use to the other one just doesn't work... ie. Download fine, Upload no workie in afp,smb, or ftp! :-P

Bug and Fix: Report Template Preview displays ORA-01002

Hi, omniscient All!
Let me share some knowledge with you. There is an old APEX bug:
BUG: preview report template errors with ORA-01002
Report Template Preview/Copy Error
Template Preview Error:
You can definitely see it in 4.0, 4.1, 4.2, 4.2.1 versions: open any database application in AppBuilder, go to Shared Components→Templates, move cursor on Some Report Template row, click Preview Icon. Voilà:
report error:
ORA-01002: fetch out of sequenceI looked into Template Preview region's source and have found next WWV_RENDER_REPORT3.show call:
wwv_render_report3.show(
    p_query => '
select 1 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 2 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 3 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 4 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 5 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 6 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual
order by 1',
    p_row_template_id => :f4000_p245_id,
    p_region_id => 88449328191587806
);I have no wish to go deep into my further investigation, therefore I just call a cause: APEX Team, you forgot to set the value of P_PLUG_SOURCE_TYPE parameter.
Workaround: While APEX Team will making a patch, those who can't wait it should fix it manually by executing next code:
update &APEX_SCHEMA.wwv_flow_page_plugs
   set plug_source = q'{wwv_render_report3.show(
    p_query => '
select 1 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 2 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 3 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 4 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 5 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
select 6 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual
order by 1',
    p_row_template_id => :f4000_p245_id,
    p_region_id => 88449328191587806,
    p_plug_source_type => 'SQL_QUERY'
where id = 14562627207747006
/APEX_SCHEMA is schema where APEX was installed.
Good luck,
Alex
Edited by: tiPPLer on 14.02.2013 17:14

I wouldn't mind piggy-backing this to ask if the Report Template "shortcut" links at the top of the page can be updated to account for all sections that are now a part of the Report Template. "Before Each Row" and "After Each Row" sections are not listed in the shortcuts. There are also two shortcuts listed as "Before" and "After" which should probably be relabeled.
Shane.

Publicly accessable list of bugs/known issue for the 2.1 release?

Does one exist? If so, where can I find it?

If you have an Oracle Support contract you are able to review any bug that has been published. We publish bugs that customer request be published. We are not trying to hide bugs from the user base, it is in your interest that every bug is not published, as this would then include trivial bugs you are not interested in. For example, we log bugs for typos, each new icon raised and updated, and for requested updates to menu titles, for the order of the tabs in the display editors and so on. If you have a bug you're interested in, you can contact Support, request the bug be published, if it's not already published and then keep track of its progress.
There have been requests that we publish bugs mentioned on the forum, and we do this where we can. Bugs are by default not published. If the product is in a beta cycle for example, then the bug is logged for that beta cycle and is not publishable. We can publish bugs that are logged against production software. This forum is not an alternative to Support or Metalink. Customers pay for the support they get through Oracle Support and the service that is available there.
Customers with Oracle Database Support contracts have support for SQL Developer.
Regards
Sue

Subscriptions for fimware/software new releases, bugs and fixes

Similar Messages

Maybe you are looking for