Subsequent / re-activation of Cost of Sales Accounting

We are currently engaged at a new SAP customer (ECC6) that does not currently require COS Accounting to be activated /functional area functionality, but might require it at a later stage / subsequent to the initial go-live.
Based on the contents of SAP Note 740519, it appears that when COS Accounting is subsequently activated, the functional area cannot be repopulated for historic data when using ECC6.
QUESTION:
Should the customer decide to subsequently activate COS Accounting at the start of a new fiscal year (i.e. post go-live), all the P&L data will be populated with the functional area from the start of the new fiscal year. However, what about the carry forward balances for the Balance Sheet accounts? Is there a way to repopulate the "carried forward" balances in the Balance Sheet with a functional area, else the balance sheet will always contain incomplete functional area data for the carried forward balances.
Also, please advise if there is a program available to repopulate functional areas subsequently in the event of a subsequent activation of COS Accounting. If not, if the customer activate COS Accounting even though they don't require it at present, because it appears that you cannot change the functional area assignments once updated with transactional data?
As such, what is the recommended course of action:
1. Only activate COS Accounting when required, but resulting issues with updating historic data with functional area.... OR
2. Activate and configure pre go-live, but then cannot change functional area assignments once populated with transactional data.
I look forward to hearing from you.
Kind regards,
Dolf

Hi Dolf
   I have exactly the same requirement now with respect to cost of sales accounting. My client went live a couple of months back and now wants to activate Cost of Sales Accouting.  I have the same question of how to populate the existing historic data with the functional areas.
   What did you do when you had this issue? Did you find out any way or work around to update the historic data with functional area? What approach did you take during your implementation?
    Your response would be highly appreciated and rewarded.
Vamsi

Similar Messages

  • Activation of cost of Sales Accounting in 6.0 version

    Dear Expert,
    I would like to activate COSA in SAP 6.0 version with New GL activated with profit centre splitting.
    Can u please advise me any step by step documant guide to implement.
    Regards,
    Alok
    Moderator: Please, read and respect the rules of the forum

    Hi Srivastav,
    Have you checked the delivery due list table in your system?
    I think the issue might be caused by incorrect index entry during upgrade.
    There is a report for rebuilding index.
    Thanks and best regards,
    Smile

  • Cost of sales accounting inactive

    hello  Guru,
             My client  implementing  ECC 6.0 . we have activated the cost of sales accounting  Global Parameters. we r trying to deactive the COS , system is not allowing to deactive  throwing  error message
    When cost of sales accounting is active, the functional area characteristic is derived and saved in documents and totals records.
    Deactivating cost of sales accounting has the following consequences:
    •     No functional areas are derived for costs posted after cost of accounting has been deactivated.
    If you reactivate cost of sales accounting, these same costs remain without a functional area. It is not possible to derive functional areas for these costs at a later stage. Costs that are posted after cost of sales accounting has been reactivated have functional areas derived for them once again.
    •     The cost of sales accounting ledger, 0F, continues to be updated even after cost of sales accounting has been deactivated, but without the functional area characteristic.
    To prevent this happening, SAP recommends that you also deactivate the cost of sales accounting ledger 0F.
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Controlling -> Controlling: General -> Change Message Control.
    The application area and message number can be taken from the technical documentation

    Hello
    Once Cost of Sales Accounting is active the Ledger 0F will be updated      
    for all costs posted with functional area.                                 
    When you deactivate "Cost of Sale Accounting", this Ledger will still be   
    updated but without functional area.                                       
    To prevent this data inconsistency, the message is set as "Error Message",    
    that is why you receive this error, and why it recommends that you       
    change the message to a warning message instead of an error.               
    Please check your settings in GCL2 to deactivate 0F.
    It is recommended that you then set this message back to 'Error' after         
    deactivation to prevent any other ledger being deactivated by             
    accident.              
    Regards
    Javier Reviriego

  • Functional area and cost of sales accounting (company code 2000) active

    Hi There!
    I hope someone can help.
    In our sandbox system, whenever I try to convert a Purchase requistion into a Purchase Order I get the following error message : "Functional area and cost of sales accounting (company code 2000) active".
    Anyone know how I can resolve this issue?
    Kind regards,
    Karl

    Hi,
    Double click on the error message & check the message Number..
    Then go to
    Spro>MM>Pur
    Attributes of system messages & change the Message from Error to Warning..
    Thx
    Raju

  • Substitution for "Cost of sales Accounting" not working with cycle-trx KSC5

    Hello togehter,
    I have a problem that it seems that a created Substitution for "Cost of sales Accounting" is not executed in our System when running a cycle for Indirect Activity Allocation (Trx. KSC5).
    Now I want to debug the Indirect Activity Allocation but I don't know how those Substitution Steps are generated as code that I can set a breakpoint when executing the cycle with Trx KSC5.
    I want to try a trace when activating the substitution with transaction OBBZ but I'm not able to analyze in which Forms/Functions the Code is generated.
    I also saw some OSS Notes that there are problems with "Cost of Sales Accounting" but I don't know concretely what to do to solve that special problem.
    Kind regards
    Udo

    thanks for your answer.
    I added the filed FKBER in table VWTYGB01.
    Now I can select field "functional area" for CO Substitution.
    nevertheless substitution does not work and set functional area on Dummy FB 9990 for CO postings to CO-object without Functional area.
    Thats curious because I maintained exactly the same Substitution on an other SAP System (IDES Test System) and here it works.
    Any ideas?
    Are there further settigs required after maintenance of table VWTYGB01??
    Thanks in advance

  • Cost of Sales Accounting

    Functional Area "0100" assigned in one General ledger Which one the requirement of 2 company, But Functiona Area should be derived from respective object ( Cost center/ Order etc)  for  one company which is located in another country.
    How it can be achived?

    1) activate cost of sales accounting (FI/global settings/company codes/cost of sales accounting ...
    -> interesting is you can choose between in preparation en production. The first one means the' functional area' field becomes active for master data assignments but is not posted yet in produciton. Ideally if you need some time to make all the master data assignments.
    2) define functional area (under enterprise organisation / Structures ...
    3) assign functional area's to CO objects (cost centers / production order types / internal orders , ... and optionally to P&L accounts
    4) as of version 47, allow functional area as CO object when working with fixed assets (in fixed assets customizing).
    5) define reports in report painter
    that is.
    -> most of the work is thinking about and setting up the master data assignments (of the functional area). Configuration part is very little.
    regards
    D

  • Cost of sales accounting & period accounting

    Hi folks,
    I want to know the difference between cost of sales accounting & period accounting. where do we use them and which is preferable. thanks in advance.
    Regards,
    Vijay

    Two accounting methods used for generating profitability statements are the cost-of-sales method and the period accounting method. Applying either method to a given set of business transactions under a given set of laws yields the same bottom-line result (profit) in concept. The difference is in how the overall profit and loss picture is presented.
         Companies must choose to use one of these methods for generating their legal financial statements. <b>The choice is often determined by country-specific legal requirements.</b>
         Cost-of-sales accounting
         With this method, the emphasis is on matching the revenues for goods and/or services provided (the value that a company gains as a result of sales) against the related expenses for those items (the value that is lost when products are transferred out of the company). Therefore, this accounting method displays profit and loss information in a manner optimized for conducting margin analyses, and as such it is optimal for the sales, marketing, and product management areas.
         Period accounting     
         With this method, the emphasis is on summarizing the activity and situational change over a period of time, for a given organizational unit. Therefore, this accounting method presents the revenues and primary expenses that have been incurred during a given period of time and the changes in stock value levels, work-in-process, and capitalized activities. As such, it is optimal for the production and profit center areas.

  • Cost-of-sales accounting / DUMMY-substitution for CO posting w/o func. area

    Dear experts,
    we activated Cost-of-sales accounting (special ledger - no use of NewGL functionalities).
    We use the SAP "Standard substitition" in FI to make sure that all postings on P&L accounts go to special ledger. If no functional area can be derived, posting is assigend to Dummy functional area.
    So far so good.
    My question is: Is it possible to set up a "similar" substituition in case of CO postings with secondary cost element (e.g. Internal activity allocation, Overhead Rates) on other CO-object without functional area.
    e.g. Internal activity allocation from Cost center to production order. No functional area assigned to production order.
    I hope you unterstand my question for this issue.
    Thanks in advance for your reply.
    regards,
    Butch

    thanks for your answer.
    I added the filed FKBER in table VWTYGB01.
    Now I can select field "functional area" for CO Substitution.
    nevertheless substitution does not work and set functional area on Dummy FB 9990 for CO postings to CO-object without Functional area.
    Thats curious because I maintained exactly the same Substitution on an other SAP System (IDES Test System) and here it works.
    Any ideas?
    Are there further settigs required after maintenance of table VWTYGB01??
    Thanks in advance

  • Segment Reporting and Cost of Sales Accounting

    Hi Experts,
    Will there be an impact if we won't activate cost of sales accounting but we activated document online splitting and segment?
    Thanks.

    Hi,
    They are different.  Cost of Sales Accounting requires the functional area to be assigned or a subsitution rule activated.
    Hope this helps.
    Cheers,
    Gimmo

  • Period accounting vs Cost of Sales accounting

    Hello all,
    <b>Could someone explain to me the difference between Period accounting and Cost of Sales accounting? Where is period accounting configured in ECC 6.0?</b>
    I am trying configure PCA. The client wants the Profit centers to be setup product-wise. They have 3 products: a) a handheld GPS device, b) the accessories for the GPS device, c) and the subscription. I have setup 3 profit centers according to the 3 products.
    <b>Does either cost of sales accounting or period accounting come into the picture in my scenario? What I mean is, do either of the two methods have to be configured? And if so, why?</b>
    I have read in some places ("Configuring FICO" by Hurst & Nowak) that preparing PCA to accept actual postings can be very simple or complex. On the simple side, all that is required is to activate the fiscal year control parameters, create the proper document types, and define the necessary number ranges. For more complex solutions, additional account assignment may be maintained, and internal goods movement can be defined.
    <b>My client is just looking for a plain vanilla implementation of PCA at this time. Does that affect whether we use period or COS accounting?</b>
    Thanks in advance! Points available.

    Hi,
    Do check out the following documentation :
    http://help.sap.com/bp_bblibrary/600/html/N74_EN_GCC.htm
    Cost of Sales Accounting
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/b3/c3e040852f712ae10000000a155106/content.htm
    Period Accounting
    In period accounting, the performance of a particular business unit (profit center) - that is, its revenues, changes in inventory and capitalized services - is set off against the total costs of the period. This occurs at the G/L account level and adheres to the formal structure of Financial Accounting. This gives you a uniform structure of report data and lets you reconcile the data of cost and financial accounting on the basis of cost elements.
    Hope this helps.
    cheers,
    Gimmo

  • Cost of sales accounting implementation

    Hi
    Can we implement cost of sales accounting in the mid of the Fiscal year
    if so ,
    how to capture functional area in the transactions , changing in the master data will not allow as balances exist
    what are all prequisities and configuration to be made for this to implement

    It is not possible to transfer existing/old data to funactional area. Only new data from now on will flow.

  • OKB9 - Cost of sales accounts assigned to profitability segement

    Hi All,
    I am brand new in an SAP team and I want to understand how OKB9 works and how I could control it.
    I want that all Cost of sales accounts ( included cycle count adjustment, difference when posting MIRO ) are posted to profitability segment.
    At the moment account for cost difference between inventory price and invoice price is defined in OKB9 with a default cost center.Can I change that to PSG ?
    Also if I define the accounts as PSG, how can I prevent people from booking manually to cost center for example on those accoutns where I only want profitability segment bookings ?
    Hope this is clear enough to receive good help.
    Thanks
    Stéphane

    If you dont want people to post to a cost center you can control this via the FSG (Field Status Group)
    This is linked to the GL account, and defined at posting key level.

  • Item Interface error - "The Cost of Sales Account specified is not a valid"

    A week back we migrated from 11.5.10 to 12.1.3
    Since then, many items are failing in Item Interface with the error "The Cost of Sales Account specified is not a valid account or has expired in organization ITEM MASTER INV."
    Item Master being the 'Inventory master organization'. I checked the cost of sales account & sales account. and they are Valid also their corresponding segments are valid in their respective value sets.
    Log message for 'Item Import'
    Import Items
    Argument 1 (ORG_ID) = 167
    Argument 2 (ALL_ORG) = 1
    Argument 3 (VAL_ITEM_FLAG) = 1
    Argument 4 (PRO_ITEM_FLAG) = 1
    Argument 5 (DEL_REC_FLAG) = 1
    Argument 6 (PROCESS_SET) = 77
    Argument 7 (MODE) = 2
    Argument 8 (Gather Stats) = 1
    TRANSACTION ID : 42878726
    ORGANIZATION ID : 174
    TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
    COLUMN NAME : COST_OF_SALES_ACCOUNT
    MESSAGE NAME : INV_IOI_ERR
    ERROR MESSAGE : The Cost of Sales Account specified is not a valid account or has expired in organization ITEM MASTER INV.
    TRANSACTION ID : 42878726
    ORGANIZATION ID : 174
    TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
    COLUMN NAME : SALES_ACCOUNT
    MESSAGE NAME : INV_IOI_ERR
    ERROR MESSAGE : The Sales Account specified is not valid or has expired for the organization ITEM MASTER INV.
    Please help.

    The Cost_of_sales_account & Sales_account as defined in the MTL_PARAMETERS are different from those in MTL_SYSTEM_ITEMS_B for the corresponding item. The values for these accounts in the interface tables are same as that in the MTL_SYSTEM_ITEMS_B table and hence not same as those defined in MTL_PARAMETERS.
    Actually we have a Custom trigger on the MTL_SYSTEM_ITEMS_B table which updates these accounts, once the item is created in the Master Organization.
    To verify this issue, I updated the accounts on the MTL_SYSTEM_ITEMS_INTERFACE table to match with that of MTL_PARAMETERS. Ran the 'Item Import', now those records are processed.
    Does this means that, the Interface is validating the cost_of_sales_account & sales_account to match with that of the 'Organization' ??.
    But we never had this issue in 11i. Is this a part of R12??

  • Changing Cost of SAles Account form Profit Centre to Cost Centre

    In order to be able to forecast against Cost of Sales accounts within the same process and plan version as expenditure accounts, I am proposing to create Cost Elements on the G/L accounts associated (they currently post to Profit Centre).
    Apart from losing history reporting, are there any issues to consider before making this change (e.g automatic account assignment)

    Hello Shirley,
    Here are the areas that I can think of:
    1) Field Status Group for Cost objects- OB41 and OB14: For all the GL's that will be created as Cost Element, ensure that Cost Center is not a "Suppressed" or "Display" field, it has to be a "Required" or at least an "Optional" field. (Internal Orders, if used, need similar treatment)
    2) Field Status Group for Profit Centers: Similarly, if you have made Profit Center a "Required" field, then you may want to make it "Optional" and allow it to be defaulted from the Cost Center or Internal Order
    3) Profit Center Derivation: 3KEH / 3KEI: Entries in these tables, if any, need to be removed for the Accounts that are being created as Cost Elements.
    4) Default Account Assignment: OKB9: In case you are not able to enter Cost Center / Internal Order at the time of FI Document entry, then you will need to include these in OKB9.
    Hope this information helps.
    Regards.
    Ashish.

  • Cost of sales accounting in sap classical GL.

    Hi Expert,
    we are facing problem to know the Material Cost against Sales i.e Revenue for Particular Product. kindly help through which module we will configure so that customer will come to know, while producing the finished goods this much of material Cost, Manpower , Energy as so on occurred till finished goods. Client Manufacturing Automotive Spare Parts for Domestic  customer as well foreign. Total 25 Products manufacturing , purchase Raw Material then produced finished goods.
    Kindly let me know which Module we will start to config.
    Note : we are working on  ECC 6  but still NEW GL not activated and Document splitting. we want in existing GL i.e Classic GL.
    Urgent Requirement.
    Yr immediate response will be highly appreciated.
    Kind regards
    Pranav Kr. Gupta
    SAP FICO Consultant

    Hi Pranav
    Your requirement can be met by product costing and copa
    Standard cost estimate split can be transferred to copa during billing. Your std cost estimate will comprise of raw material, labor, overhead etc. When you release bulling from vf01, system will update cost split also along with revenue
    However, this split will be based on std cost. Variances are updated to copa during month end when you settle the prod order... if you want the split in copa based on actual cost, you need material ledger activated
    To fetch std cost split in copa, you need
    1. Costing key in ke40
    2. Val strategy in ke4u
    3. Val field mapping to cost components in ke4r
    4. Costing key assignment in ke4j or kepc
    This is addressed many times in the forum. You can check for the above steps in scn
    Br.  Ajay M

Maybe you are looking for