Subsequent settlement with different volumes (scale and rebate)

Hi
A nice question for you all.
In subsequent settlement I want to do the following:
Interval scales:
>$100.000 -> 1% rebate
>$450.000 -> 2% rebate
>$600.000 -> 3% rebate
(this is easy)
When I want to determine the business volume I want to differentiate between:
- trucks
- cars
Based on the following numbers:
Annual business volume for trucks: $200.000
Annual business volume for cars: $300.000
Total volume: $500.000
This means the rebate wil fall in the 2% interval.
BUT.... the rebate is ONLY for cars and NOT for trucks.
--> 2% of 300.000 = $6.000
How to do this?
Regards,
Arno

Sangeeta,
What do you think of the following:
Build up business volume for every delivery of the supplier and also for the trucks.
I will make two rebates:
For the total volume:
>$100.000 -> -1% rebate
>$450.000 -> -2% rebate
>$600.000 -> -3% rebate
For the trucks volume:
>$100.000 -> +1% rebate
>$450.000 -> +2% rebate
>$600.000 -> +3% rebate
Since the trucks will be in the +1% rate and the total volume will be in the 2% rate I have to change the interval for the scales condition manually in trx MEU2, but not the price condition. After the comparisation is finished both are in the +/- 2% scale and I can settle the agreement.
Only one manual step needed, sounds as a fine solution, do you agree?

Similar Messages

How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
(74502)

Same sqlID with different execution plan and Elapsed Time (s), Executions time

Hello All,
The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
17th Oct 18th Oct
221,808,602
21
2tc2d3u52rppt
213,170,100
72,495,618
9c8wqzz7kyf37
209,239,059
71,477,888
9c8wqzz7kyf37
139,331,777
1
7b0kzmf0pfpzn
144,813,295
1
0cqc3bxxd1yqy
102,045,818
1
8vp1ap3af0ma5
128,892,787
16,673,829
84cqfur5na6fg
89,485,065
1
5kk8nd3uzkw13
127,467,250
16,642,939
1uz87xssm312g
67,520,695
8,058,820
a9n705a9gfb71
104,490,582
12,443,376
a9n705a9gfb71
62,627,205
1
ctwjy8cs6vng2
101,677,382
15,147,771
3p8q3q0scmr2k
57,965,892
268,353
akp7vwtyfmuas
98,000,414
1
0ybdwg85v9v6m
57,519,802
53
1kn9bv63xvjtc
87,293,909
1
5kk8nd3uzkw13
52,690,398
0
9btkg0axsk114
77,786,274
74
1kn9bv63xvjtc
34,767,882
1,003
bdgma0tn8ajz9
Not only queries are different but also the number of blocks read by top 10 queries are much higher on 17th than 18th.
The other big difference is the average read time on two days
Tablespace IO Stats
17th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
947,766
59
4.24
4.86
185,084
11
2,887
6.42
UNDOTBS2
517,609
32
4.27
1.00
112,070
7
108
11.85
INDUS_MST_DATA01
288,994
18
8.63
8.38
52,541
3
23,490
7.45
INDUS_TRN_INDX01
223,581
14
11.50
2.03
59,882
4
533
4.26
TEMP
198,936
12
2.77
17.88
11,179
1
732
2.13
INDUS_LOG_DATA01
45,838
3
4.81
14.36
348
0
1
0.00
INDUS_TMP_DATA01
44,020
3
4.41
16.55
244
0
1,587
4.79
SYSAUX
19,373
1
19.81
1.05
14,489
1
0
0.00
INDUS_LOG_INDX01
17,559
1
4.75
1.96
2,837
0
2
0.00
SYSTEM
7,881
0
12.15
1.04
1,361
0
109
7.71
INDUS_TMP_INDX01
1,873
0
11.48
13.62
231
0
0
0.00
INDUS_MST_INDX01
256
0
13.09
1.04
194
0
2
10.00
UNDOTBS1
70
0
1.86
1.00
60
0
0
0.00
STG_DATA01
63
0
1.27
1.00
60
0
0
0.00
USERS
63
0
0.32
1.00
60
0
0
0.00
INDUS_LOB_DATA01
62
0
0.32
1.00
60
0
0
0.00
TS_AUDIT
62
0
0.48
1.00
60
0
0
0.00
18th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
980,283
91
1.40
4.74

The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
You wrote with different execution plan, I think, you saw plans. It is very difficult, you get old plan.
I think Execution plans is not changed in different days, if you not added index or ...
What say ADDM report about this script?
As you know, It is normally, different Elapsed Time for same statement in different day.
It is depend your database workload.
It think you must use SQL Access and SQl Tuning advisor for this script.
You can get solution for slow running problem.
Regards
Mahir M. Quluzade

How do i change ringtone volume to ring with low volume first and then gradually increase to the max volume ?

how do i change ringtone volume to ring with low volume first and then gradually increase to the max volume ? this feature was available before but is still available now ? this is for IOS8 running on Iphone 5c.

I've never been aware of a function like this in the past. You could create a personal ringtone that would last 30 seconds or less and set the volume on that ringtone to do that with an audio editor, such as Audacity.

What is the best way to manage multiple devices with one iMac - different users with seperate itunes accounts or one mac user with different itune logons and libraries?

Hello
I have just purchased an imac which I am very happy with. In our household we also have two iphones (one mine and one husbands) and one ipod (my sons). We all have individual itunes accounts set up on our previous computer (not a mac). We have sepereate apps and music, although there may be the odd occasion where we would like to share a song (if this is possible) across devices.
I am just wondering the best way to manage these devices using the new imac. Should I create individual accounts to logon to the imac, then from within these launch our own itunes accounts and sync our devices with these. Or should I be using one version of itunes, logging on to this with our different itunes usernames and storing things in libraries.
Any help would be greatly appreciated.
Thanks

I am presuming that we cannot share downloaded apps and music between accounts because of the copyright issue,
Though I'm no copyright lawyer, as long as it's within a household, you can share content among users. Such sharing is, absent specific language preventing it not present in the iTunes Store terms of use, generally considered to be "personal use". So you can share apps and music amongst your users on your computer and with their devices. You just can't give any of that content to friends or relatives who don't live with you.
What I am not clear on, it making sure that this appears in each itunes account - is it easy to find the file storage folders that match the itunes accounts and what would these be?
The iTunes library and files are by default in a user's Home/Music folder. But you don't have to find the folder; in fact putting a file into the folder yourself won't add the file to iTunes. Just drag the file into the iTunes window. iTunes will copy it to the correct location.
Regards.

Can you use 2 apple tvs on the same network with different apple ids and how would your devices know which apple tv to stream to?

Hi,
I was looking into purchasing 2 apple tvs and was wondering if they can be setup with different apple ids. I need to have mine setup with my id and be able to hook my devices to it , but have the one in a bedroom hooked to a different apple id and have my friend's devices stream to that one and not mine. Is this possible?

Welcome to the Apple Community.
In order that your Apple TV only streamed from your iTunes Library and your friends to your friends, you would both have to have different homesharing ID's.
So far as devices go, any device on a network can stream over AirPlay to an Apple TV, to ensure each of you couldn't stream to the others device you can enable a password via the Apple TV which would then need entering when you used a device for AirPlay.
Shouldn't be a problem to do what you want to do.

MM INVOICE created with different Payment Terms and 2 differents PO.

I will explain with an example to understand better the issue and why this could happen, (for the same Co.Code):
On 05.09.2011, 5203795529 was posted with payment terms D030.
At that time, PO #: 4501105395 was having payment terms D030 while PO #: 4501232207 was having payment term D031.
Invoice 5203795529 was posted successfully.
On 12.09.2011, 5203806574 was posted with payment terms D030.
At that time, PO #: 4501105395 was having payment terms D030 while PO #: 4501232207 was having payment term D031.
Invoice 5203795529 was posted successfully.
In OCT, user receives another invoice for this 2 POs (4501232207 & 4501105395) and trying to post MIRO again but this time, user encountered error 'Payment terms in purchase order 4501232207 differ from current terms'. In order to proceed, user has changed payment term for 4501105395 from D030 to D031 on 17.10.2011 and proceed with invoice posting without error. 5203878342 was posted on 17.10.2011.
The vendor always has the same Payment Term: D031
Now the question is, why user is able to post without any problem previously even though there's different payment terms on both POs and not now anymore?.
Thanks

Thanks Jayavar,
Nobody has changed anything, (I mean the PO Payment terms), until October in PO. 4501105395
The error message is when the user try to post with MIRO PO´s (4501232207 & 4501105395):
"Terms of payment in purchase order 4501232207 (always with Payment term D031), differ from current terms"
Message no. M8349
Diagnosis:
The terms of payment in the current invoice differ from those in the current purchase order 4501232207, other terms of payment were stipulated:
Terms of payment key D031
1st cash discount period 31 days 0,000%
Either you have selected more purchase orders with different terms of payment, or you have changed the terms of payment manually.
But the strange thing is in SEP, there's already this difference & there is no problem posting the invoice & the problem only comes when in OCT.
Thanks and Rgs
Francisco

How to generate a pulse train with different pulse width and delay?

How to generate a triggered pulse train with different pulse width. for example, after each trigger signal, let's say 2 ms, then the counter output a pulse with pulsewidth of 1 ms, and then after 3 ms delay after the first pulse, the second pulse was generated with a pulse width of 4 ms. Next cycle when the trigger signal comes, the same two pulses will be generated and so on. Is it possible to achieve this by using 6601 counter card? and if yes, how to achieve this? Thanks!

Unfortunately you can not create a hardware timed pulse train with different widths on each pulse from a counter. Whilst it can be changed on the fly using software, since you require a hardware triggered signal getting the software involved will not give a huge amount of accuracy when the pulse will actually change.
So in short you can't use your 6601 card (or a counter timer) to achieve this
There are three possible Alternative solutions
1 You could use a high speed digital IO device such as the (6533/34) to generate your variable signal which would require setting up the pulse train as a series of states based around the burst transmission mode where the clock would give you your specific timing.
2 A timed analogy output (for example on a MIO card with a clock (PCI-6220 / 62xx), i.e. Not the 6704 style static analogy output cards)
3 A high speed digital waveform card such as the (, 656x , 655x, 654x, 6534, 6533 (http://www.ni.com/modularinstruments/find_right.htm) ) this could then be scripted to work with your triggering and also there is a digital waveform editor which will enable you to set up the pattern you wish to generate (http://sine.ni.com/nips/cds/view/p/lang/en/nid/13555)
Hope that helps
Tim Matthews
NI (UK)

Open a new peoplesoft session with different user id and password.

I am already logged in a peoplesoft session. From here i want to open another peoplesoft session (in different window) with different user and password.
Can anybody help...?

The problem you're going to have with this is that in PeopleSoft there are some memory-resident cookies in your browser session that identify your session (jsessionid) to the web server and your identity (PSTOKEN) to the PeopleSoft servlets. With tabbed browsers (Firefox, IE7+) you have to do some "special" things to get them to create multiple browser sessions with distinct cookies.
For Firefox, you have to create a distinct profile. Do this by closing down firefox and running "firefox -ProfileManager" from the command line. Then you can create a second firefox profile (note: it won't inherit any of your bookmarks or add-ins from the existing profile). Then after starting firefox with your default profile, you can start a second instance of firefox with the command line "firefox -p <mynewprofile> -no-remote. This will start a second instance of firefox with it's own cookies that can independently log in to a second PeopleSoft system
For IE7 or IE8, it's a little easier. Start your first browser session as normal, and then to start the second session, use the commandline "C:\Program Files\Internet Explorer\iexplore.exe" -new. This will start your second browser instance with a new set of cookies.
Hope it helps.

IDoc to File with different file name and data based on the IDoc header dat

Hi,
I got a requirement to implement IDOC to file senario. In this the Converted file should have the file name and file content based on IDoc Header data. Means If one of the IDoc header field value is
'A' - then the file name recieved by reciever system should be 'A.txt' and with the columns A B C D F.
'B' - then the file name recieved by reciever system should be 'B.txt' and with the columns C D F.
In both the case IDoc message type is same.
Please suggest me what i need to do to achieve this.
Thanks in Advance. ...
Regards
Sri

Hi,
As per my requirement, we need to create one file for each IDoc based on IDoc header data. SAP program generates 10 IDocs for each run. All 10 IDoc's message type is same. Each IDoc has one header record with the file name. Base on the name in the IDoc header record, file needs to be created with different columns and file name. Means..
IDoc 01- Header Description contains 'A' - than file will be generated should have name as 'A.txt' and columns 'parent' 'child' 'descripion'.
IDoc 02- Header Description contains 'B' - than file will be generated should have name as 'B.txt' and columns 'Name' 'Department' 'Description'.
IDoc 10- Header Description contains 'J' - than file will be generated should have name as 'J.txt' and columns 'Order No' 'Materail' 'Description'.
Hope this will give more clarity on my requirement. Please let me if you are still not clear on requirement.
Thanks for your all help..
Thanks & Regards
Sreeni

How to handle same product with different part numbers and pricing in SAP.

I am a new user and want to learn if the following scenario can be handled by SAP.
Our business buys a product from a supplier which has 2 different part numbers and prices. It is the same product. One is the primary product whilst the other is available only as an upgrade option with a different part number to a mainline product at a cheaper price .
Our issue is that we sometimes buy the upgrade option with a mainline product to get the better price even though these go into stock. Basically we need to have the items linked with both part numbers in SAP at different prices but inventory both in and out only going against the primary part number. Any ideas?

Thanks Jitin
I did give them different part numbers and then attached a Bom containing the primary part number against the upgrade option however I really need to have the secondary item as a sales and purchase item but non inventory so the stock comes from the primary part. Ideally if we receipt the goods in as the secondary number the inventory goes to the primary part. If the second number is an inventory item then I have the issue of the same part with different part numbers sitting in stock at different prices and having to rely on employees understanding the difference.
Sorry to be so confusing. I will do some more testing over the weekend and see if I can find a suitable solution.
Thanks
Martin

I have 2 iPhones, from different carries and different numbers. Both with different apple ids and somehow I can still texts sent from both phones to other iPhones and I don't know how to fix it.

I had an iPhone from Verizon, and i got another iPhone from us cellular. I'm giving my old iPhone to my friend, and somehow we can both see each other's messages sent to other iPhones. Both have different apple ids and numbers. How do I fix this?

You probably activated the new phone will the old phone was still active. That would have linked the two numbers to iMessage. Go into iMessage and turn them off on each phone. Then turn iMessage on for your phone. When it activates, go into Settings>Messages>Send and Receive and see what numbers/email addresses are linked there. It should just be the current phone number and if desired, your Apple ID email address.
Then have the other person turn their iMessage back on and when it activates see if it now only brings their current phone number and again if desired Apple ID email address.

HOW TO SHARE MY ITUNES LIBRARY WITH MY WIFE ON SAME IMAC WITH DIFFERENT USER ACCOUNTS AND APPLE ID'S. PLEASE HELP, SOMEBODY!

I just created an Apple Id for my wife and a user account for her. We are on the same computer (iMac). I cant for the love of God get my itunes library to show on her user account on computer. My library shows up under shared library when i select it it just keeps loading and nothing. When i try the hold down option while opening itunes on her user account and then choose library my library doesnt show up as option. What in the world am i doing wrong, why is Apple making this so difficult. We are not going to buy separte computers just to share itunes content. Please help.

You can sync devices with the same iCloud ID, not seperate ones.
If she has a different login on your Mac, make sure she has her own ID defined in System Prefs > iCloud

Access two EAS with different Essbase versions and different java versions from the same p.c.

Hi,
I need to regularly access Essbase 11.1.2.2. and Essbase 11.1.2.3 EAS from the same client machine.
They are on, and must be on, different versions of java, is there a way to have both versions of java installed but each using the correct version and without the two java versions causing any kind of problems?
thanks,
Robert.

Hi Robert... I assume this is web-launched?
I spent a day or so trying understand the intricacies of the JNLP protocol and create shortcuts that will invoke web-launched EAS with the appropriate version of Java. I can get one version of EAS to use the 1.6 Java Web Launcher, and the other version of EAS to use the 1.7 Java Web Launcher - but both Web Launchers eventually invoke the same version of Java! There are switches in the JNLP syntax that seem like they should allow you choose the actual Java version that gets invoked, but I just could not make it work.
You can use the Java Control Panel (in Control Panel) to enable and disable the relevant versions before launching EAS.
If you find otherwise I would love to know (or if you find out how to control which versions are enabled or disabled via command-line script).

HT204053 My wife and I bought our phones separately with different credit cards and our own information. Why is it set up with us SHARING the 5GB storage on the cloud?

Help!!??

To change the iCloud account you have to first delete the existing account from your phone. Go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, if you have any merged data in your accounts, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting the her contacts from your account, and vice versa).
Also, if you need to change the ID for iMessage, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with the new ID. If you need to do this for FaceTime, go to Settings>FaceTime and do the same thing.

Subsequent settlement with different volumes (scale and rebate)

Similar Messages

Maybe you are looking for