Subsription will be cancelled; how to use old paym...

Hi
I have an issue with my subscription, it will be cancelled in two days from now and it wont allow me use my old payment method with my card, how can I overide this and avoid my subsciption from being revoked
Regards
M
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.
Spoiler (Highlight to read)

More inof:
I saw an old post that said: "Does original iPhone work without phone service -- Yes, but you won't be able to install future firmware updates or restore the iPhone with iTunes if wanted or needed.. Both require the iPhone being activated."
Not knowing this limitation, we did a full restore/reset on an old 1st gen iphone, so is there anyway to get it working like an ipod. Per above, I get a screen asking me to activate.
AT&T even obliged me by allowing this phone to be reactivated (for a few days) and gave me a new sim card to put in the phone, but it wouldn't reactivate probably since it's so old: AT&T didn't know what to do and Apple wouldn't deal with a product out of warranty.
So now phone is not activated and am basically locked out from using as ipod.

Similar Messages

How to use old nano ipod on new computer

How to use old nano ipod with new computer

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
Try completely removing all the iTunes related programs according to this method.
http://support.apple.com/kb/HT1923
Restart you PC and see if startup improves.
If it doesn't improve you need to consider the possibility that there is something else going on.
If The problem goes away, hopefully a fresh install will be OK.

New Firewire 800 External Hard Drive and how to use old External USB Drive

Hi All,
I have a new LaCie d2 Quadra Hard Disk hard drive 500 GB - FireWire / FireWire 800 / Hi-Speed USB / eSATA-300 on the way, when it arrives I plan to use it as my Time Machine Backup drive with the FireWire 800 connection. I am currently using a Seagate Free Agent USB 2.0 320 GB external drive as my Time Machine disk. The reason for upgrading is the USB drive is slow slow slow! I am not concerned about the data on my old drive and will just wipe it clean using Disk Utility. What I would like to do is use the old drive to archive iTunes 7.7.1 and Aperture 2.0 music and photographs. Can someone give me an idea how to go about doing this?
Thanks!

Hi, yes that will copy the whole iTunes..including everything in iTunes..BUT, as you add to your iTunes on the Main HD, with the ext HD I think you will have to manually update anything added. Or dragNdrop the whole thing again.. You could also locate you iTunes music Library & just copy that across..With images once again find your iPhoto library & just copy that across..L

How to use old "Apple Loops for Soundtrack" with Garageband

Since Soundtrack (was part of FinalCut Express HD) doesn't work anymore (since some ProKit framework update) and was not part of the FinalCut Express 4 upgrade I used Garageband for sound creation and editing. But I missed some good loops from the old Soundtrack.
The Apple Loops for Soundtrack were still sitting on my harddisk but Garageband didn't recognize them in the Loop-Browser. Looking at the structure I found the Search Index files (/Library/Audio/Apple Loop Index/). I have two there, one for Garageband and another for iLife Sound Effects. Both are interpreted by Garageband. But no third for the old Soundtrack Loops. So I had a look at the Sound Loops installer DVD from FinalCut HD and there I found a similar structur and copied the Index file to the location of the two indexes mentioned above. I left the Loops for Soundtrack where they are (also could edit the index file for new locations, but that's a 7.5MB text file) and now Garageband knows their location and also lists the loops at the right categories inside the Loop-Browser.
Maybe that helps someone, even if I didn't find a topic about it here.

Ah.. ok, then never mind. Just didn't find any information about how to use the old soundtrack loops with garageband and so I did some thinking on my own. And if it works that easy, the better it is

Can anyone point me toward a tutorial/video/anything that will show me how to use iMovie '11?

The Apple video tutorial was just a commercial. Other info I found on Apple site was for the iPad. I have a MacBook Pro. I need to learn how to use iMovie '11 from the start. Very start. To borrow a line from a movie 'Talk to me like I'm a 5-year-old.' For example, what is the difference between a 'project' and an 'event'? Which one do I create first? How do I adjust the exposure and color on my movies? Once I am done with my movie how do I tell computer/software to 'save' it because I am done. Then where is it? These are just examples.
I'd love to find any basic tutorial/video/help.
I got a book but it's way too advanced.
Thank you.

There is also a good web page if you are interested in transfering iOS Projects from iPad/iPhone/iPod to iMovie '11 for the desktop:
- Transferring iMovie for iOS Projects from iPad/iPhone/iPod to iMovie for Desktop:
http://support.apple.com/kb/PH2154
- iMovie '11 (9.0.8 for the desktop) video Tutorials: http://www.apple.com/ilife/imovie/

How to use old archieve logs with a new control file

Environment:
ORACLE_BASE="/export/home/oracle"
ORACLE_HOME="/export/home/oracle/product/8.1.6"
NLS_LANG=".UTF8"
2 partitions:
i) /data1 -- contains important datafiles (OS striping on 3 hard
disks)
ii) /export/home -- contains the oracle program, and SYS/SYSTEM
datafiles
Problem:
-/data1 cannot be read/mount (damaged)
-oracle failed
Action Performed:
-reinstalled OS
-mount /export/home successfully (all oracle system files,
instance init files exist)
-/data1 is an empty partition
-created the oracle user, and its groups
-chown recusively for the $ORACLE_BASE directory
-set all the oracle environment variables
-attempted to start the instance, but failed due to a control
file was
missing
-since control files were set to be mirrored, i copied a control
file somewhere
from /export/home/oracle/oradata/<SID>/control1.ctl to
/data1/oracle/oradata/<SID>/control2.ctl (i.e. have them back to
their original locations)
-the instance failed to start as well, since the datafile set in
the control files couldn't be found
-this forced me to re-create the control file... b4 i re-create
a new control file, i backed up the old one
-once the control file was created, the database can be started,
but, to oracle, all achieve log information are lost (although
the achieve log's physical files r still there)
-i imported the important data from a dump file that was
exported a week ago b4 the system failure
-since we r using the new control file, the redo logs switch
contains no achieve log information that the old control file
has, so running "recover database" doesn't do anything
Purpose:
since the dump file is a week old, i'd like to get the data
after my last export and b4 the system failure. the database was
run in arhieve log mode, how can i recover those data with the
new control file
Question:
-how can we create a new control file that can drive the old
achieve logs?
-can we convert the achieve log data (.dbf format) into text
format?
-can we still use the old control files to start the database?
-what's a suggested solution if we'd like to re-construct the
database up to the moment b4 the system failure in another
server?
thx

user3930585 wrote:
I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Are you stating that you don't know how to use COPY command?
Can you recreate same directory structure on new C drive as exist on old C drive?
Can you then drag & drop copies of the files?

How to use old Time Capsule als external disk

I just bought a new 3TB TC. I want to use the old one as an external disk and I also have some files on there I want to use. the new 3TBTC connected nicely, but the old TC on ethernet cable is not recognized by Mac Pro.
How do i connect the old TC to Mac Pro to use as occasional external disk?
thanx
Frank

Factory reset the old TC.. plug it by ethernet into the network.. straight into the new TC is the obvious place.
The Mac should then be able to find it.. if not I can suggest how to do it manually in full isolation from the network.
Airtport Utility can't find Airport Time Capsule on either of my 2009 Macs

How to use old library with new computer?

Hello,
I keep all my music on an external HD. Recently, my main computer died, so I had to start using another iMac. It's running Tiger and iTunes 6, but I have never used the iTunes before. How do I get this computer to "see" my old iTunes library (on the external)?

You are welcome. One thing that comes to mind is that I believe when you use an external drive to hold your library, it is important that the external is on and mounted when ever you start up iTunes. My understanding is if you start iTunes and the external drive is not available, then iTunes reverts back to the default location on your internal. You then have to reset it back to the external, but I think you also have to re-add everything all over again.
So be sure you always have the external up and ready whenever you open iTunes.
Patrick

How to use old rms to the new version.

Hai i am using a application with rms.
Now i have updated the gui of the application. I want to install it in the phone. It is erasing my old data.
How can i use the same rms for this version .
Did anyone knows about it.
Thanks in advance for the help provided
raj

See the second and third entries from the bottom of the table of recovery tools in Recover your iTunes library from your iPod or iOS device.
tt2

New iMac-how to use old and new

So, I'm in the middle of migrating my settings from my old iMac to my new iMac. I've already started transfering my settings and applications.
I was going to give my old iMac to my husband, who now has a MacMini. After I started transferring, he told me I should just keep both iMacs for working. It would actually be convenient - Keep one for having browser, planning, mail, business apps open at all times and the other for heavy-duty Photoshop, etc. work.
What should I do to be able to work on both? Do I need to re-do my set up on the new one? The settings and apps really should be the same any way - do I need to create a different user?

Do I need to set up a different user on each computer?
No
Right now, becuase I was in the process of migrating, the new iMac is a duplicate of what's on the old. Do I need to create a new user on one and delete it on the other? What happens if I have the users duplicated?
Not necessary, when you migrate it will make a clone of the other machine if you choose all options. If you want then to remain synced you can do so with the same user account and AppleID assuming you use iCloud and both machines are on Lion. You can sync what I noted in my first post.
I want to use one more for light business apps and one for my image processing.
If your goal is to sync apps and data currenlty there isn't an automated method of doing that other than keeping the data on an account such as DropBox. If you don't have a DropBox account then that may be what you're looking for however you will have to pay for data in excess of 2GB. The first 2GB is free.

How to use old 1st gen iPhone as iPod after deactivated?

I just got a new iPhone 4S and gave my first generation iPhone to my kid to use as an iPod. I transferred the phone number so now the new iPhone works as my phone and the old iphone did not connect to AT&T but did work as an iPod (or through wireless). Rather than just sync'ing to his computer, he erased the iPhone somehow while it was not connected to a computer. This apparently erased everything including activation. Now when he hooks up to iTunes on a Mac or PC, he automatically goes to iTunes Store and gets a page asking for him to activate. The iphone has multiple languages on the screen and window for making emergency call so it looks like he wiped the old iphone "clean". From reading discussions, my impression is that iPhone needs to be activated before you can use even as an iPod. So my question is how can I get this old iPhone to work as an iPod?
I do have Time Machine backups of my Mac from when the old iphone was activated and connected to AT&T. Is there some way to use this to restore iphone to the way it was before the above?
I suppose the other option would be to do some kind of jail-break fix?
thanks

More inof:
I saw an old post that said: "Does original iPhone work without phone service -- Yes, but you won't be able to install future firmware updates or restore the iPhone with iTunes if wanted or needed.. Both require the iPhone being activated."
Not knowing this limitation, we did a full restore/reset on an old 1st gen iphone, so is there anyway to get it working like an ipod. Per above, I get a screen asking me to activate.
AT&T even obliged me by allowing this phone to be reactivated (for a few days) and gave me a new sim card to put in the phone, but it wouldn't reactivate probably since it's so old: AT&T didn't know what to do and Apple wouldn't deal with a product out of warranty.
So now phone is not activated and am basically locked out from using as ipod.

How to use old 2005 cinema display (20'') with MacBook Air (mid-2009)

My old 20'' cinema display (2005) has three ports coming out of its power box (single-port dvi, usb, firewire). Is it possible to use this display with my newer MacBook Air (mid-2009) ? If so, what kind of connector do I need? Thank you very much for your help.

To use my old Cinema display (2005) with my old PowerMac G5 (2005) I had to plug in all three ports (DVI, usb and firewire) into the desktop. Can I really use the display just with the DVI output plugged into my MacBook Air mini-Display Port ?

FireFox keyboard shortcuts - how to use old, traditional scheme?

I still have no idea why did FF team decided to touch keyboard patterns:
- It is not design/features/etc. Eyes can adapt to anything, indeed, no problem
but
- This is in the essence how your fingers use software, that's a physical world. Hands definitely are MUCH more sensitive.
I would like to note that I have all three (IE, Chrome, FF) browsers installed, I used FF last few years, but a few months (or half a year?) ago they made that radical update which touched not eyes/brains, but hands. And that's a mess:
- Home and End keys simply are not used now in FF :-/ (and earlier it was used for scrolling page in current tab)
- PgDw and PgUp keys are used for going forward/back (!) in your tab
- to switch tabs to the right you have to use Ctrl+Tab, and for back Ctrl+Shift+Tab
etc.
etc.
To say that I was disappointed is to say nothing. I tried, week or so, to adapt to new tradition of keyboard use in FF, but I miserably failed. Then, ** for some other reason ** I ran Chrome. And since then I am Chrommed....
- PageUp and PageDown keys do work in Chrome for scrolling page
- Home and End keys do work in Chrome for scrolling page
- Ctrl+PgUp/PgDn - you switch tabs
People like me do NOT switch to Mac because (I work mostly in MS Office) there a bit different (really minor) keyboard shortcuts etc. etc.
I am stuck. Or they are some kind of Linux or whatever guys... And I even don't know how to give them feedback, and how to show them that there MANY people like me - we love FF but your change of keyboard shortcuts touched not brain/eyes, but our hands.

You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How to use old TC with new TC for storage only?

Bought a 2TB TC and I still have my older 1 TB. Is their any way to use the older time capsule as a hard drive only and have that TC backed up along with my iMac on the new TC?

Basically the answer to this is NO!!
You can set it up but not the way you are thinking.
The TC is now and forevermore a network drive. You can therefore bridge the TC and plug it into your network. The obvious place being your new TC. You can also turn off the wireless in the old TC.. it is now a network accessible hard disk.
But Time Machine has a huge limitation.. it cannot backup network drives. So your TC cannot be backed up with your iMac to the new TC. Not by Time Machine. You can buy a different backup software.. eg CCC is excellent and use that.
Overall the TC is slower and less reliable than a USB drive plugged straight into your iMac.. especially if the iMac is newer type with USB3 ports.
And the USB drive is local and so it can be backed up by Time Machine. (Must have HFS+ format and be included in the backup).

Subsription will be cancelled; how to use old paym...

Similar Messages

Maybe you are looking for