Subsription with 2 devices?

I have Adobe cloud and Indesign downloaded on both my desktop and laptop - and have a month-to-month subscription; but I cannot get my laptop version to operate InDesign. I"m logged in and asked for a serial number. Can I not use both devices with my subscription? I"ve reinstalled, downloaded, updated, all the above and still doesn't work. PLease advise.

There is no serial number. You log in with your Adobe ID.
Are you trying to use CS6 or CC?

Similar Messages

  • Initial Print jobs 'communication error with device'. Pause and restart job

    So, I have an odd variant of the Leopard print problem; on 3 separate systems.
    When I print to an HP Photosmart C7180, which setup fine, which I can scan to fine, the print job throws an error :error communicating with device, switch on and off' and so forth. It does that from any app, and consistently. I am printing via bonjour, the printer is networked, but on a static IP.
    To fix this EVERY-TIME I PAUSE printer, then start printer again. It immediately starts working, consistently until I sleep, log out, or don't print for a while.
    This seems to be some timeout issue or such. I tried IP printing, but no difference.
    Resetting the print system also did not help.
    It's not catastrophic but sooo annoying. Any input appreciated!
    Thx,
    Dan

    Hello SunnygirlQ. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help:
    o Printer troubleshooting for AirPort Extreme and AirPort Express
    I assume that this printer works just fine when it is connected directly to your Mac ... correct? If so, has it worked when connected to the AX in the past ... or has it always had this problem? If it did work correctly before, did you do any updates, especially to the AX, recently?

  • Spartan 3E with Labview 2012 (32 bit) on WIndows 7 64-bit - Error Code: -310602 NI-COBS: Unable to communicate with device over communication cable.

    Thanks for the info, Kyle.  I will probably try to find an older 32-bit XP machine.  VM is just not an option for me right now.

    Hello everybody,
    I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit.  I am able to compile the example code for LED shift.  I am however unable to transfer code to the FPGA.  I get the following error message:
    Error Code: -310602 
    NI-COBS:  Unable to communicate with device over communication cable. 
    Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
    My system configuration is as follows:
    Windows 7 (64 bit) on Dell XPS laptop.
    Labview 2012 SP1 (32 bit)
    Labview FPGA 2012 SP1
    Labview 2012 FPGA support for Spartan3E
    Xilinx 13.4 tools
    DEFB LV FPGA 2012sp1 support installer
    Xilinx USB cable driver v1.3 installed.
    I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly.  I even uninstalled and reinstalled the entire Labview software set I had.  I still get the same error.
    A few other questions:
    1.  Is the Xilinx cable different from a regular USB cable of the same configuration ?
    2.  When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board.  Should any other cable be connected ?
    3.  What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
    I have been at this or over 3 days trying to figure it out.  Any help will be greatly appreciated.
     

  • ICloud no longer syncs with devices.

    iCloud no longer syncs with devices. Error message reads "The certificate for this server is invalid.  You might be connecting to a server that is pretending to be "setup.icloud.com" which could put your confidential information at risk."  I am not positive if this issue coincides with the update to OS6.0.

    How nice.  Thanks for sharing that with us. Do you have a question you would like to ask?

  • I have a HP Laserjet 4345MFP with Device Errors in the log

    I have an HP LaserJet 4345 MFP with Device Errors in my log, How do I resolve this issues.  It is obvoisly not a Windows 7 issue, or a connectivitiy Issue, it is a machine issue, if you would like me to continue using HP products for my company I think you would be wise and fix your website so it will let me ask the questions I have about it so I can get a decent answer to help me resolve my issues.  HP has the worst forums I've ever seen..
    50 Jan-17-2012 01:37 PM 136100 49 0665 09.170.8 5E90 2356 Device Error
    49 Jan-17-2012 01:42 PM 136103 49 0665 09.170.8 5E90 2356 Device Error
    48 Jan-09-2012 04:23 PM 134393 49 0665 09.170.8 5E90 2356 Device Error
    47 Dec-29-2011 01:36 PM 132772 41.03.00 09.170.8 GENERAL MISPRINT ERROR
    46 Dec-29-2011 11:31 AM 132748 30.01.03 09.170.8 ADF PICK ERROR
    45 Nov-04-2011 11:47 AM 125334 41.03.00 09.170.8 GENERAL MISPRINT ERROR
    44 Nov-04-2011 11:47 AM 125334 13.06.00 09.170.8 FUSER OUTPUT, PAPER STOPPED JAM
    43 Nov-04-2011 11:46 AM 125333 41.03.00 09.170.8 GENERAL MISPRINT ERROR
    42 Nov-04-2011 11:43 AM 125332 13.02.00 09.170.8 PAPER FEED 1, PAPER STOPPED JAM
    41 Oct-26-2011 05:21 PM 122984 30.01.02 09.170.8 ADF PAPER JAM

    Hi wonka001, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • I'm having a problem with device capture

    I'm having a problem with device capture. I connect my Sony HC-90 via firewire. I can start the capture process in Premier 4 but then all control freezes.
    Any ideas?
    Thanks,
    Jeff

    Are they custom EQ settings in iTunes on the computer?
    Per:
    https://discussions.apple.com/message/17383922#17383922
    "Do the EQ settings from my iTunes library transfer to my iPhone when I sync it"
    Yes.
    " thus causing my iPhone to over process the data when I turn it's EQ on? "
    No. If the EQ ison, the iPhone will use the EQ setting you assigned in iTunes. It will use only the preset EQ. If you have a custom setting or do not have an EQ setting, it will not be used and will use the setting on the iPhone.

  • Rip CD not showing up in Library and I don't want to sync with devices

    I would like to rip CD's to my iTunes Library but I don't want to sync with devices. Ripped CDs are not showing up in the physical folder location I have designated in the Preferences Tab...t's an exyernal drive...Any help would be appreciated...

    As you know, you can designate an external drive to be your iTunes Media folder location.  However, if you ever start iTunes when the external is disconnected or unavailable, iTunes will revert back to the local drive.

  • HT5232 does ipad mini have a usb port? if not then how can i share my documents with devices other than apple?

    does ipad mini have a usb port? if not then how can i share my documents with devices other than apple?

    Wireless Flash Drive (tap to enlarge image)

  • Link 1.2.0 says "can't communicate with device"

    Hi guys, my z10 running the official version of 10.2.1.537 can't connect to my blackberry link anymore.  I update the link and since then, hasn't been working.  I uninstalled it and re-installed but still nothing.  I get the message on it saying "can't communicate with device" and that i should do a restore back to factory settings.  Does anyone know what to do to solve this issue without having to restore?

    There is not anything specific for Mac, did you at least try the below.
    Launch BlackBerry Link.
    Connect the BlackBerry 10 smartphone to the computer.
    Note: The following messages should be displayed:BlackBerry Link cannot communicate with the connected device.
    Power the BlackBerry 10 smartphone off and then on again.
    When prompted again with the error (BlackBerry Link cannot communicate with the connected device.), ignore the warning message, however, do not dismiss or cancel it. Allow the smartphone to fully boot up to the home screen.
    After 3-5 minutes the driver should install successfully and allow BlackBerry Link to continue the device setup.
    The only other possible resolution is to remove the   "BlackBerry Smartphone Drivers"   reboot Mac and phone then reconnect phone to Mac.

  • Metainit error - overlaps with device in metadevice state database

    I have successfully mirrored 3 of 4 partitions on a new install but am having trouble with the last one. It is the swap partition. There are the usual steps I follow:
    SWAP (slice 1):
    1. metainit -f d11 1 1 c0t0d0s1
    2. metainit d12 1 1 c0t8d0s1
    3. metainit d10 -m d11
    4. edit the /etc/vfstab
    5. reboot
    6. metattach d10 d12
    After step #1, I get the following error:
    metainit: tpssol2: c0t0d0s1: overlaps with device in metadevice state database
    I check metastat and all the config files and don't see anything wrong.

    What platform is this? SPARC or X86 and OS version. This normally happens after a rebuild and you get 2 disk devices with the same ID.
    #iostat -Ei
    This will display your disks and IDs. If the match, you will need to do the following (this should applies for physical and virtual servers, but I have only tested it on VMware) in this example c1t0d0 and c1t1d0(secondary) are the disks with matching IDs.
    #iostat -Ei
    this shows 2 disks with the same ID
    #cfgadm -al|grep c1t
    c1::dsk/c1t0d0 disk connected configured unknown
    c1::dsk/c1t1d0 disk connected configured unknown
    #cfgadm -c unconfigure c1::dsk/c1t1d0
    #cfgadm -al|grep c1t
    c1::dsk/c1t0d0 disk connected configured unknown
    c1::dsk/c1t1d0 disk connected unconfigured unknown
    #iostat -Ei
    this shows now only one disk
    from within VMWare manager remove the secondary disk and add it back again!
    #cfgadm -c configure c1::dsk/c1t1d0
    #cfgadm -al|grep c1t
    c1::dsk/c1t0d0 disk connected configured unknown
    c1::dsk/c1t1d0 disk connected configured unknown
    #iostat -Ei
    this now showed a new disk with a unique disk ID.
    #fdisk /dev/rdsk/c1t1d0p0
    Y to the prompt to create Solaris 100% prompt
    #prtvtoc /dev/rdsk/c1t0d0s2|fmthard -s - /dev/rdsk/c1t1d0s2
    #metadb -af -c4 c1t0d0s7 c1t1d0s7
    Success! You can now setup your mirroring.
    Edited by: readlee on Sep 17, 2008 7:06 AM

  • slice overlaps with device in metadevice state database

    bash-3.00# metadb
    bash-3.00# newfs /dev/rdsk/c0t1d0s7
    newfs: construct a new file system /dev/rdsk/c0t1d0s7: (y/n)? y
    Warning: 784 sector(s) in last cylinder unallocated
    /dev/rdsk/c0t1d0s7: 103664 sectors in 17 cylinders of 48 tracks, 128 sectors
    50.6MB in 2 cyl groups (13 c/g, 39.00MB/g, 18624 i/g)
    super-block backups (for fsck -F ufs -o b=#) at:
    32, 80032,
    bash-3.00# metadb -ac3 /dev/dsk/c0t1d0s7
    bash-3.00# metadb
    flags first blk block count
    a u 16 8192 /dev/dsk/c0t1d0s7
    a u 8208 8192 /dev/dsk/c0t1d0s7
    a u 16400 8192 /dev/dsk/c0t1d0s7
    bash-3.00# metainit d20 1 1 /dev/dsk/c0t1d0s0
    metainit: unknown: c0t1d0s0: overlaps with device in metadevice state database
    bash-3.00# metainit -f d20 1 1 /dev/dsk/c0t1d0s0
    metainit: unknown: c0t1d0s0: overlaps with device in metadevice state database
    bash-3.00#
    I get the same result using raw devices.
    The root device is on slice 6 ; this slice being an LU Boot Environment.
    I'm stuck now.Any ideas?
    I'll eliminate the non allocated sectors and try again.
    Edited by: plasmichive on Nov 11, 2009 3:11 AM

    Sorry folks. I had failed to check the placing of slice 7... which I had assumed would be placed in the highest cylinder numbers... however, I used a "custom install" facility, which had placed them somewhere else... I failed to notice when I repartitioned the disk.
    The filesystem which I "newfs"ed a little chunk out of was blank anyway.
    Off to try to bite a chunk out of an operational filesystem now.... idle hands...
    Edited by: plasmichive on Nov 11, 2009 3:35 AM

  • Error with device performance report

    Hi all
    I had propblem with  Device performance report of LMS 4.0. You could see picture below about the problem. How do resolve it ?
    Thanks

    Hi all
    Here is error about Device performance report. Please help me fix it. Thanks
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Servlet execution threw an exception
        org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
        com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
        com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
    root cause
    java.lang.OutOfMemoryError: unable to create new native thread
        java.lang.Thread.start0(Native Method)
        java.lang.Thread.start(Thread.java:640)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:923)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1149)
        sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:434)
        sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:166)
        sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1019)
        com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl.getOutputStream(HttpsURLConnectionOldImpl.java:200)
        com.cisco.nm.xms.ctm.client.DefaultHTTPClientImpl.getOutputStream(DefaultHTTPClientImpl.java:83)
        com.cisco.nm.xms.ctm.client.CTMCall.performBinaryRPC(CTMCall.java:782)
        com.cisco.nm.xms.ctm.client.CTMCall.performRPC(CTMCall.java:694)
        com.cisco.nm.xms.ctm.client.CTMCall.invoke(CTMCall.java:409)
        com.cisco.nm.xms.ctm.client.CTMCall.setMethodAndInvoke(CTMCall.java:449)
        com.cisco.nm.xms.ctm.client.CTMClientProxy.invoke(CTMClientProxy.java:70)
        $Proxy544.evaluateGroup(Unknown Source)
        com.cisco.nm.xms.ogs.client.OGSServerProxy.evaluateGroup(OGSServerProxy.java:900)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.evaluateGroup(DeviceSelectorTreeGenerator.java:2621)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getFirstLevelGroups(DeviceSelectorTreeGenerator.java:453)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getGroupsAndObjects(DeviceSelectorTreeGenerator.java:399)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getTreeEntries(DeviceSelectorTreeGenerator.java:192)
        com.cisco.nm.uii.hos.HOSRequestHelper.generateParameterEntries(HOSRequestHelper.java:5560)
        com.cisco.nm.uii.hos.HOSRequestHelper.constructHOSTree(HOSRequestHelper.java:1010)
        com.cisco.nm.upm.reports.devicedashboard.DeviceDashBoardAction.perform(DeviceDashBoardAction.java:65)
        org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
        org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
        org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
        javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
        javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
        org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
        com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
        com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.29 logs.
    Apache Tomcat/5.5.29

  • I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can  any one help

    I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can  any one help

    try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

  • Hello, I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13..

    Hello,
    I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
    SO PLEAZZZZZ HELP!!!!!

    An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.

  • Merging local records with device records failed

    Hi,
    I have a macbook with OS X 10.4.11 (Intel procesor)  I did install the latest Pockect mac for blackberry version (the current one in the Blackberry's page), i use to use the old one, since I did the updated I can't get that both, device and Mac SYNC any item, no contacts, no calendar... 
    The message I got last time was: 
    06:06:57:140 merging local records with device records failed. 
    Could some one with me a light on this bug?
    Thanks 

    Hi rguardia,
    Can you try synching one PIM database at a time, e.g. just Contacts by itself, so we can determine which database is experiencing the problem?  The error you are receiving is likely being caused by one specific database.
    Once you have identified the database that is causing problems, can you perform the steps listed below:
    1 - Run Data Purge on the affected database.  Data purge can be found in the following location: 
    Mac HD/users/<Home User>/Library/Application Support/PocketMacSyncManager/Additional Tools. 
    ***Please note this utility will delete all information stored in the selected database on your BlackBerry however once the information has been deleted from your device you can reimport the data to your BlackBerry from the application on your Mac.
    2 - Run Sync Clean, which can be found in the same folder as Data Purge. 
    3 - Disconnect the BB from the Mac, remove the battery from the back of the device, wait 10 seconds then reinsert it
    4 - Reboot the Mac
    5 - Reconnect your BlackBerry to your Mac
    6 - Open PocketMac and select Reset All Devices to First Sync State from the Devices menu
    7 - Configure synchronization settings for the affected PIM database, choosing the option to Overwrite Device.  If the data is successfully transferred to the device, reconfigure PocketMac back to doing a two-way sync.
    If you are still running into the same problem after performing the steps above, try synching one category of the affected database at a time. To do this, click on the tab of the database you are trying to sync, click on Advanced Preferences next to the selected application, and choose the option to sync only selected categories. Try synching with only one category selected at a time, just to see if the issue is related to data within a specific category.
    Let us know how you make out!

  • Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device

    Digital Fax to Folder Setup gives error message unable to establish 2-way communication  with device. I can s end a Fax and I can print documents. I can also, now, scan to computer. I have changed the phone line twice, restarted the router, restarted the computer, and made sure the front panel was lit when setting up the Digital Fax folder. I am on a Homegroup network, with both wireles and ethernet computers.  When I view the network, it sees both computers (wireless laptop and enthernet desktop), the printer, scanner, and router (VerizonDrive). I recently had to reinstall Windows 7, where Digital Fax to Folder Setup previously worked, and now it doesn't.  The network shows up as Network 3. When I try to view the network map, I get the error message that Windows cannot create the network map. Responses from other devices on the network are delayed or there is an  incompatible router on the network.  What am I doing wrong?

    Hello @JiffyFingers and Good Afternoon
    From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
    You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
    Hope that helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for