Substitute mat temporarly (for one instance only)

Hi, i want to create substitute mat for item A as item B in bom of a finished mat. I have selected item A in bom, open item detail, entered alternate item group as 1, But in which field should we enter item B as substitute? whetehr it allow me to change the bom at the time of changing the prod order? pls guide the steps.

Hi,
Click on Arrow of alt.Group1 & give input as 1,,1,,2,100% in each box respectively,enter & save.
Now add line item below the First material through CS02 in same BOM & select item detail ,Click on Arrow of alt.Group 1 & give input as 1,,2,,2,100% in each box respectively,enter & save.
Now in Routing do the Comp.allocation for both the material to Single operation.
When you create Production order & there confirmation,it will show you both the material in Goods movement.
Here selection is yours,you can put the material as per availablity or Keep Blank one of them.
save the Confirmation.
Hope it will help you.
Regards,
Mukesh.

Similar Messages

Multiple Logical Systems in Partner Profile for one instance

Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System? If it is possible, can we create Logical System with respect to Plant/Country?

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

HT204019 Can I turn off the ringtone for one contact only?

Is it possible to turn off the ringtone for one contact only? The block feature won't work because I still want to be able to receive voice messages from this particular contact.

You can assign a silent ringtone to that one person. Google to find such a ringtone, sync it to the phone, assign the custom ringtone to this person and when they call, the phone will appear not to ring.

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

Is it possibel to create one connection [pool for one report only

Hi is it possibe to create one connection pool for one report only. Others report are running from the another connection pool under same DB.
Thanks,

Hi,
Why do u want seperate connectionpool for that single report?
I dont think its possible.Direct database request will be good solution for this.Try importing those columns which are used to build that report into physical layer and create new subject area.Not sure weather its right way to do.
Regards,
Srikanth

Multiple port for one instance

hello there,
Here is my requirement...
If one of my master ldap went down for couple of hours and when i bring it up... all the arrowpoint traffic is routed immediately to this server and hence whatever changes happend in the secondary server was not showing up immediately in this primary master server. To avoid this issue.. can i use a different port for replication only and once the replication is completed , then i want to allow the client to access the main port.
Is it possible? Any idea? Thank you for anyone input.
SS

1. EITHER multi-home your network card so that it has multiple IP addresses
Launch each instance of ldap with the commandline option to bind this instance to a particular IP address
2. OR provide alternate ports for each instance of ldap
This is easier to do . However, it is not recommended for production systems. Usually used in development.
If the scenario is production environment use first method.
If it is a development environment try the second.
See the port properties. Check the ldap port settings.
NOTE: ldap has a known bug. To fix this get into sun site. This bug is fixed.
Thanks
--Britto

Changing look and feel for one INSTANCE of a component

I am trying to change the look and feel of just ONE instance of a component. In particular, I want to change the color of the JScrollBar thumb on a certain JScrollPane. I want this change to not affect any other component, either before or after. How can I do this?? Any help would be much appreciated.
AC

Hi acalvin3!
I have a solution. Use the UIManagers database. You should overwrite the default settings for the resource you want to change, the code is self explaining:
      UIManager.put( "Button.margin", commonMargin );
      UIManager.put( "Button.focusInputMap", commonInputMap );
      UIManager.put( "Button.font", buttonFont );To reset values you only have to use
      UIManager.put( "Button.margin", null );
      UIManager.put( "Button.focusInputMap", null );
      UIManager.put( "Button.font", null );Set values before you create your component and reset values immedeately after you created your component, otherwise you may affect other components too.
With following code you can find out default values for the whole UIManagers database:
      Hashtable defaultProps = UIManager.getDefaults();
      Enumeration enum = defaultProps.keys();
      while (enum.hasMoreElements()) {
         Object key = enum.nextElement();
         System.out.println( "key: '" + key + "'\t value: '" + defaultProps.get(key) + "'" );
      }You just have to look for the output for the component you want to change the look and feel.
Have fun...

Need a report column to hold data for one row only

Hey Guys,
I have a report which has a column that links to another page in my APEX application.
There is a requirement where only one of the rows in this report needs to have a link so I need the column to show the page link for one row and one row only.
The report will have about 5 rows at a time so is there a way to just make this link appear for the one row(it will be the top row) in the column attirbute in APEX? or can this be done in the SQL for the report?
Any help is much appreciated
Thanks
-Mark

Hi
The only way (I believe) to do this is within the SQL. Then you just wrap the column in a CASE statement and if it meets your criteria then build up the link and if not then display normally.
Something like this...
SELECT ename,
       CASE WHEN empno = 7839
       THEN '<a href="f?p='||:APP_ID||':4:'||:APP_SESSION||'::NO::P4_TARGET_ITEM:'||empno||'" >'||empno||'</a>'
       ELSE TO_CHAR(empno)
       END empno
FROM empCheers
Ben

Colour profiles within PS are off for one monitor only?

Hi guys,
I'm having a very strange issue with colour management in Photoshop CS2 currently.
Photoshop seems to be calibrating all documents in a strange way on only *one* monitor. If I drag the file across to the other monitor the colour is completely different.
Of course it sounds like my monitors being off, however when dragging the file across monitors Photoshop slowly updates the colours for the next monitor. You can see it display the wrong colour at first, then correct it (hopefully that makes sense).
Another symptom of it is when I go to 'save for web'. Here, the colours revert to what I believe are correct.
b It's worth noting that this has only started to happen since some Windows updates. One being an option update from Dell for my monitor - I can't seem to find any information about it though!
My tester that I've been using is a plain white to black gradient. What I'm seeing is a lot of cyan in the middle of the gradient. I've saved off an example:
http://2dforever.com/photoshop.png
As you can see, all the greys are very green, but if you look at the gradient tool in the toolbar itself, the grey appears fine.
I'm unsure how I can adjust the colour profile from Photoshop for one monitor - am I missing something really obvious here?
Just to note: I'm on Win Xp SP2, Photoshop CS2, and I've cleared the preferences.

Since you only mention Photoshop as having a problem, this is almost
certainly, as you suspect, a monitor profile config problem.
Color profiles for individual monitors are configured in
Start>Settings>Control Panel>Display>Settings>(Advanced Button)>Color
Management.
In Settings, click on the monitor whose profile you want to verify before
clicking on the "Advanced..." button. I would start by adding and
defaulting the profile for the monitor that is causing problems.
The Microsoft XP color control panel applet makes setup easier, though it
is not really necessary. If the link below fails, google for keywords
Microsoft XP color control panel applet.
http://www.microsoft.com/downloads/details.aspx?FamilyID=1e33dca0-7721-43ca-9174-7f8d429fb b9e&displaylang=en

DFS Replication for one group only not working

I have 2 DFS Replication groups and each group contains the same 2 member servers.
One group is set to replicate one drive pair between these members, and the other group is set to replicate another drive pair between the same member servers.
Replication works perfectly for one group / folder, but it does not even start on the other group.
This proves that there is no problem with the connectivity between the members, or to the AD.
The DFS Replication Health Report for the group that does not replicate shows no error, just 2 Warnings:
WARNINGS (2 servers with warnings)(Show All)
BOG-RODC (1 warning)
Reference member returned no replicated folders.
MTL-HV-FS01 (1 warning)
This member is waiting for initial replication for replicated folder BOG-RODC_D_Drive.
This is very weird, I don't see why it does not replicate, I'm pooling my hair out. Please help
Titus

follow up on the above issue: Yes I did delete the group, and DFSRPrivate folder and recreated the group again, but this did not help.
Problem has been fixed by Microsoft, I had to open a case with them. Apparently the Jet database that's hidden in the "System Volume Information" was corrupted, so not only he deleted the group, but did the following, changed permissions/ownership
to access the System Volume Information, then:
D:\>cd "System Volume Information"
D:\System Volume Information>cd DFSR
D:\System Volume Information\DFSR>dir
Volume in drive D is Data
Volume Serial Number is F4CD-B05B
Directory of D:\System Volume Information\DFSR
10/10/2014 11:09 AM <DIR> .
10/10/2014 11:09 AM <DIR> ..
10/02/2014 12:01 PM 0 $db_normal$
02/04/2015 10:14 AM <DIR> Config
10/10/2014 10:49 AM <DIR> database_E6F4_CDDD_F4CD_B05B
10/02/2014 12:01 PM <DIR> Private
1 File(s) 0 bytes
5 Dir(s) 1,558,208,782,336 bytes free
D:\System Volume Information\DFSR>rd database_E6F4_CDDD_F4CD_B05B /s /q
D:\System Volume Information\DFSR>dir
Volume in drive D is Data
Volume Serial Number is F4CD-B05B
Directory of D:\System Volume Information\DFSR
02/04/2015 10:20 AM <DIR> .
02/04/2015 10:20 AM <DIR> ..
10/02/2014 12:01 PM 0 $db_normal$
02/04/2015 10:19 AM <DIR> Config
10/02/2014 12:01 PM <DIR> Private
1 File(s) 0 bytes
4 Dir(s) 1,558,344,138,752 bytes free
Then as usually recreated the replication group. I haven't seen this information anywhere on the web or in the Microsoft site.
Hope this will help other people having the same problem as myself. Proceed with care.

Two sids for One instance

Hi All,
I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
Give me the suggestions...
Cheers,
Moorthy.GS

I think you need to define your term 'database' here
In Oracle world, database is usually referred to as instance.
a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

AppleCare+ For One Year Only?

Starting with the upcoming iPhone 5s I will be upgrading my phone every year as opposed to every other year. I am trying to decide if I want AppleCare+ or ATT Insurance for my device. I understand AppleCare+ extends your warranty to 2 years from 1 (and 2 years of phone support that I do not need.) However, if I am only going to keep the device for one year is there any advantage to purchasing AppleCare+? I understand you get refunded a prorated difference from Apple. What else? Are they deductibles and quality of service for damage different

Yes, I understand you cannot just buy it for one year, I will just be upgrading every year so the second year does not matter. It does look like Apple will provide a pro-rated refund if you sell it back. Thank you for the information on the lack of accidential coverage without AppleCare+, that is exactly the type of information I was looking for.
I am also trying to decide between ATT Insurance and AppleCare+, if anyone has any experience with ATT covering accidential damage and how they compare to Apple I would appriciate it.
Thanks everyone!

DW Right-justifying the index for one site only

Dreamweaver has suddenly started showing the directory for one of my sites as right-justified:
Does anyone know how I can get this back to left-justified?
Thanks
Steve

toonbone23 wrote:
...Adobe who know exactly what causes this. Don't they ever visit the forum?.
Steve
I'm not sure they do!
This is a user forum. I htink if you want an answer to your question, you might like to consder raising a support ticket. I come here quite a bit, and I have never noticed anyone ever having the same thing happen to them.
Martin

Office web app error for one note only

There is strange error in my SharePoint 2013 farm with OWA. Everything works fine except for one note.
If you click in the notebook on the left hand side of the site, for first time everything works fine. When you try to click the same link second time, either server error comes up in chrome and nothing in IE. If i deactivate the web feature one note and
reactivate it, it works again for first time and nothing comes up for the second time. Error i see is
WOPIFrame -Unhandled exception: System.TimeoutException: The open operation did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The read
from the pipe did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.
Has anyone seen this behavior?
sachin

Hi,
According to your description, I think this issue is more related to SharePoint, I suggest that you could post it to
SharePoint forum.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Substitute mat temporarly (for one instance only)

Similar Messages

Maybe you are looking for