Substitution activation program error in SE38

Dear Expert,
When I execute the program (RGUGBR00) in SE38 I am getting error like
002 User exit UFP00 not declared in form pool ZGGBS800.
I think some note is missing.
Can anyone let me know above the issue?
Thanks & Regards
Selva

Hi,
For using exit in substitution, you need to make changes in the ZGGBS800 program at 2 places:-
(1) Defination of exit UFP00 in form pool table
(2) Defining the code for this exit UFP00.
So please check this program in SE38. (You can also refer the standard program RGGBS000 for the way to define the exit.)
Also check in V_T80D vie in SM30, whether this program ZGGBS800 is assigned properly or not.
Regards,
SDNer

Similar Messages

Program error in se38

dear Expets,
when i run the program in se38,
I got an error,
Program terminated, time limit exce
document item(s) updated
actually am being try to run this program to fill up the set up table .
kindly help me,reg this
Edited by: gadhatharan thirunavukkarasu on Oct 27, 2011 1:09 PM

hi,
i tried and i got an error no extra structre actvated and no bw connected
My extract structre in LBWE is already activated
and my bw system is well connected to ECC
then what would be the problem,
its the first time am extract the data from vistex datasources,
so for fillup/delete and delta everyting is incorporated by program
plz guide me anyone its an urgent....

Program error in activating SAPLMCEX&LMCEXTOP in SE38

Hi,
I am getting program error in activating SAPLMCEX&LMCEXTOP in SE38. I have attached the screen shot. Please check and confirm.
Regards,
VIGNESH.

Hello madhu,
I didn't made any changes. Actually the issue is i am facing one ABAP DUMP issue at that time i have check above program it is showing the above one.
If you don't mind i am forwarding the error screen shot. Please give me any solution.
Regards,
VIGNESH.

Photoshop gives "Program Error" when I try to open files while VPN

I think this may be a new one. While VPN on my company network, Photoshop CS cannot open any files. Either drag and drop, double click or even file open command. You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though. Works fine if I'm not VPN but soon as I'm on it stops opening files or even creating a new blank canvas gives that error. I checked Adobe forum and nothing there to find about this one. Anyone else have this happen?

Hi, SSI.
1. What VPN client are you using?
As a guess, your VPN client may be blocking a port that PS CS may use for license verification over the Internet. The fact that it works AOK when not using the VPN would tend to support this hypothesis. As to what port it may be attempting to use, I can't say, but you may be able to find this out from Adobe and then work with your firm's networking staff to see if this port can be opened for use when the VPN is active.
2. You noted that you "checked Adobe forum and nothing there to find about this one." Did you post to the Adobe Photoshop forum? If not, I recommend doing so.
3. You wrote: "You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though."As FYI, in cases such as this, copying down the exact text of the message is helpful.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Program error while executing query

Hi,
We are on 2004s front-end patch 700. I am able to create and change the queries but when I execute the query, I am getting short error message which says "Critical Program Error Occured, pls refer to the trace for further information".
I am not very sure where to look for this error. But when I executed the query in RSRT it is working fine.
I have also tried activating the trace but nothing is captured there too.
Can you please help..?
Thanks
Samay

Hello Samay,
I believe you are running the query in Excel.
You are in 700. I would advise to use the latest patch if possible ( > 904 ).
May be, that will solve your issue.
Otherwise, please attach the trace file details.
You can record a front-end trace as follows:
1.) Start BExAnalyzer
2.) Go To Global Settings
3.) Go to the trace tab
4.) Check "Record Trace"
5.) Close the dialog
6.) Close BExAnalyzer
7.) Reproduce the problem
After the "Critical Program Error" popup appears you find a file
BExAnalyzerTrace.txt in the %temp% folder.
Regards,
Sheik Bilal

Program Error in new install w/FontAgent Pro

Just built a new Leopard 10.5.4 system on my new 2008 Mac Pro 8 core, got my CS3 apps installed & activated. Opened up my first file in Photoshop, fooled around a bit & closed it. Everything fine, but the file needed a font that was not installed. So I opened FontAgent Pro & installed the CS3 plugin, reopened Photoshop to see if it would load my font automatically. FAP tried to load the font, but was cut off by the Program Error dialog. Tried a couple more times to open this file, no dice. This is a brand new Mac, virgin Leopard install, 10 GB RAM, no reason I can see for this error. Your suggestions would be most welcome.

Gary,
Just out of curiosity I looked at my Photoshop CS3 Plugin folder and found two FontAgent plugins: FontAgent Pro.plugin and FontAgent Pro Helper.plugin. As my auto activation works without issue I wondered if you had both plugins installed?

"Can't Save- Program Error" Update OS?

We have now twice encountered a situation where Photoshop CS5 is "unable to save file due to a program error". This occured before and AFTER I reset Photoshop prefs -which typically fixes any corruptions resulting in operating errors. We have also had PShop freezes when the SAVE dialog has been invoked. When prefs reset does not solve the problem, I tend to suspect sytem errors. I have run disk utility & repaired disk permissions. I have not yet reset PRAM.
Unit has been mostly stabile until recently. We have NOT added any software or hardware recently.
Does resetting PRAM resest Mac system prefs? Any additional basic fixes I should run?
This MacPro has a model ID: MacPro5,1 (quad core Intel Xeon 2.8GHz, 4 core, 8gb ram. Running OS 10.6.8
Should we "upgrade" the OS? Not sure if this vintage MacPro would benefit from an upgrade. (I used to have a very stable G5 which never ran well after "upgrading" to 10.5.8)
Thanks

You saw these?
http://www.bing.com/search?q=Photoshop+CS5+unable+to+save+file+due+to+a+program+ error
This:
http://feedback.photoshop.com/photoshop_family/topics/cs6_photoshop_saving_issue s
Or:
http://feedback.photoshop.com/photoshop_family/topics/photoshop_how_do_i_share_m y_system_information
http://feedback.photoshop.com/photoshop_family/topics/cant_save_due_to_a_program _error
In the meantime,
If you do go to 10.8.3 first clean out and look for anything that would use Rosetta and PowerPC, that is gone.
I would if you have the time do a clean OS install and then Migrate or use Setup Assistant. - Lion and ML do not like carrying over old items from before and nothing of PowerPC era.
PRAM and NVRAM are unlikely as they are hardware, nor does repairing permissions.
Where are you saving to? how many drives? where? what type?
Where is scratch preference set to?
how many pageouts in Activity Monitor?
You could also create a new user account and try working from there and not copy over anything until you straighten it out.
I prefer to see the system on its own drive, scratch drive or array, media drive or array for your work and media, and the user account folders other than ~/Library NOT be on the same drive as system.
8GB RAM is minimal for what you run.

Program error message - Photoshop CS4 for Mac

I started to get the message "Could not complete your request because of a program error" a little while back, but it would go away after restarting photoshop, so I wasn't too worried about it. But now I've encountered this one file that won't let me do anything to it. As soon as I open it it pops up with the error message. No amount of clicking makes it go away, and I have to force quit photoshop. Always the same thing. I read up a little about how to fix it but I haven't found anything that works (I tried the file info>copyright idea and deleting Photoshop's preferences, even getting rid of extra fonts, and clearing the library>cache.) Any ideas? I'm not sure what to do!
More info:
It's a psd file.
There are only 2 layers on the files, one is a vector smart image.
I opened the file and was able to edit it fine on a friend's computer, no error messages whatsoever - so it's not a corrupt file. (But that doesn't solve my computer's dilemma.)
Thanks in advance.

Hi,
I have this same problem. I use Font Agent Pro and I only have about 50-ish foundry fonts activated. I'm wondering if anyone else has found a fix? The second I open Photoshop I get an error message and I have to force quit, let's not even begin thinking about opening a file.
I'm on OSX 10.6.8, running CS4. This is getting frustrating. I'm considering reinstalling the whole suite, there goes my entire evening.

Photoshop CS4 program error: deleted prefs, keeps coming back instantly

I am running Photoshop CS4 extended on my Mac OS X 10.5.6 OS. Out of no where, I create a new file, try to fill a layer with a solid color, I get the generic program error message. I click OK to get rid of it, but it is erratic. I have to force quit the program.
I deleted the pref file manually as well as Apple + Option + Shift keys while loading the program and had Photoshop delete it for me.
What other files do i need to delete/reset for this to work properly again?
My computer:
Mac Pro Dual Quad (octo)
12 GB of ram
I pulled up activity monitor and it isn't using much memory.

sounds like a bad directory I would run Diskwarrior or disk utility of the OS install DVD

Item does not match schdule line ( program error ) message no . V1427

*Item does not match schdule line ( program error ) message no . V1427 .* This is the message I am getting when I am trying to display a quotation through VA23 . From here system exits the transaction .
As per my observation , when I compared VBAP and VBEP tables, there are 2 items in VBEP table with schedule lines but the same items are not present in VBAP table. User says he tried to delete these items because there is no quanity , Inspite of that these items appear in VBEP table .
The document is a reservation document where in schedule line category does TOR and availability check.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 5.0 .
What is the best way as this doc has nearly 30 items and nearly all of them have quanity confirmed .
Please provide your valuble inputs ...
Regards
Raghav..

Nitin,
Below are the steps to check
Transaction SE18
Definition name: BADI_SD_SALES
Menu: Implementation -> Overview
double-click on implementation: IM_CORE_CHECK
Now you will get an overview on the methods.
check whether implementation IM_CORE_CHECK is active or not.
If not Press the change button and activate
looking at the your system pack level this should be active. If it is active then the inconsistency must be modified directly at database level through Z report.
Ramesh

Item does not match schedule line (program error) in sap

Dear Expert.
Greetings!
We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
The error is occurring due inconsistency on the database tables, some Item is in table VBEP, but it is missing from table VBAP. This is what is causing the error message.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 6.0 .
Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
Bapi BAPI_SD_SALES is also active.
Please let me know if anybody has any idea on the same.
regards
Praveen

Hi,
Refer the KBA: 1464620 - Error V1427: Item does not match schedule line which explains the reason and the solution for the issue.
Regards,
AKPT

CO number range program error- Urgent

I am getting a program error while trying to maintain number ranges for CO in KANK . The program gives a dump.
The ABAP guy gave the following reason:
"Controlling area 1000 is the one giving dump. Actually the program is checking entries from the Internal table XINRG.
In the client 120( golden) , this internal table has the entries for the controlling area which we are trying to maintain. But in 140( unit testing), this internal table does not have any entries in this internal table.
In the client 140, If I select controlling area 0001 or US01, it takes me to the next screen.
Looks like for 1000, somewhere some dependency has to be maintained. "
I encountered the same problem long time back and I remeber running a report thru se38.
If anyone is aware of this pls suggest as I have to begin unit testing and without this fixed I cannot proceed.
Thanks very much.

Can you give more details:
Which screen where you in (the first with the selection of Area, Interval display/ chane, Status)?
What does the dump say? XINRG does not exist in 46c or ERP6.
Are you able to copy from another co-area?
Cheers
Hein

ABAP Programming Error when saving the Process Order confirmation in COR6N

Hello,
We have an issue related to Process Order confirmation using Tcode COR6N. When we enter all the inputs to confirm( Activity, yield and phase) and click on save it gives ABAP Programming Error (Exception condition "SEQ_NOT_FOUND" raised).
Any inputs in this regard, would be appreciated.

Hello
I can observe that you have implemented the report ZOPSECRE and that an inconsistency was found.
This repor corrects inconsistent orders which do not have an operation or a sequence, or the two of them.
The report checks whether there is at least one operation or one sequence and creates both including status objects.
Therefore, you need to have the default valus for the operation generation defined on OPJG for this order type/plant.
BR
Caetano

Active X Error when running web checkout/web reports

Hi,
I am installing BO Planning X1.5 against a SQL Server database.
However, I am getting an Active X error when trying to launch web checkout/web reports.
I get to the log on page and then get the error message:
"There was an error initializing the ActiveX client"
Do you know why this would be? (I am able to get to the web checkout/web reports from the server, however not on any client machine)
Thanks.

Hi Ravi,
from Note 917950:
Test Standard Web Template in BI (both directions)
This test will check the ABAP to Java and Java to ABAP communication. Additionally, this check will ensure that the new Java-based BEx Web runtime is working.
1. Run Report RS_TEMPLATE_MAINTAIN_70
2. Enter Template ID 0ANALYSIS_PATTERN
3. Choose Program / Execute
4. Choose Analyse / Validate
5. Choose Analyse / Execute in Debug Mode
A Web Browser is opened and you have to logon to the Portal. Finally, an empty Analysis Pattern (without data) should appear.
Error messages during executing Web Template
If only a blank screen or message "Access Denied" appears, see note 872043.
If message "Error while loading the Web template "0ANALYSIS_PATTERN" (return value "5")" appears, activate Content (see topic Additional Information below).
--> I think you have to activate the Content....
Activate Web Template of BI Content
Please perform the following steps to activate a Web Template of BI Content:
1. Logon to BI System
2. Start transaction Data Warehouse Workbench (transaction code RSA1)
3. Choose register Business Content (left pane)
4. Select Object Types
5. Expand BEx Web Template in tree (middle pane)
6. Double click on Select Objects
7. Choose 0ANALYSIS_PATTERN (or any other Web Template of the BI Content)
8. Object will be transferred to right pane
9. Press button Install / Install to activate the Web Template
Now, you can execute the activated Web Template.
Links:
"0ANALYSIS_PATTERN"
Re: template 0ANALYSIS_PATTERN returns errors
Error loading template 0ANALYSIS_PATTERN while broadacasting through WAD
917950 - SAP NetWeaver 2004s: Setting Up BEx Web
[SAP NetWeaver Setting Up BEx Web|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943]
Re: Question about Bex Web Setup
Regards
Andreas

Cannot activate, Activation Server error

I can logon to the Adobe site and have a valid Adobe ID and Password. Previous version worked fine, but I cannot get past the Authoriztion Screen on Version 2.0.   Get the error message, "Activation Server error", "code : E_AUTH_NOT_READY". Repeated attempts yeild the same problem.

For the Error : E_auth_not_ready.
Follow these steps,
1. Launch Adobe Digital Editions
2. Keeping ADE program active on your screen, Hold Ctrl+Shift+D keys (Windows), Cmd+Shift+D (Mac users).
     - you will get a prompt window to Erase Authorization (ADE 2.0) & Deauthorize (ADE 1.7.2)
     - Deauthorize ADE and Re-launch it.
3. Navigate to Help > Authorize ADE (in ADE 2.0) & Library > Authorize ( in ADE 1.7.2, usually you will be prompted to authorize when you launch the program ) .

Substitution activation program error in SE38

Similar Messages

Maybe you are looking for