Substitution for internal order

Dear friends,
I am trying to use substitution function for an order type, while the company code is what I set in substitution, the field of plant in order master must be substituted into specific plant code. Now I finished the setting, including OKC9 to activate, but it doesn't work. Could you please tell any details I missing  or how do you think about this issue? Thank you in advance.
Best Regards,
Hanchu

I can suggest you one alternative. See how pracitcal it is in your case. If you are working with hanful of company codes and plants, then you may create a model order (KOM1) for every company code and plant combination. Maintain corresponding company code and plant in model order master. Number the model order by plant for example - that way it becomes easy for the user to remember.
While creating a new internal order, all user has to do is, to use appropriate reference model order in 'Reference order' field in first screen of KO01 transaction. System will default all the data from model order into the new order you are creating.
See if this works for you.
Regards
Subodh

Similar Messages

  • Profit center substitution with internal order when generating GL doc from

    Profit center substitution with internal order when generating GL doc from MM
    Dear expert,
    Please advise how to substitute successfully the profit center by which user-exit via FI substitution function.
    Substitutions have been set for profit centers in FI via t-code OBBH, but  the profit center will always be determined from the internal order when posting from MM subcon goods receipt
    Thanks
    James
    Edited by: Yun-Chung Yung on Jun 3, 2010 10:46 PM

    Hi,
    SAP give note 539421 - Dummy profit center with cost center
    account assignment. Looks applicable for your case.
    Solution:
    With the attached modification, you can restore the function from Release
    3.1: The directly assigned profit center remains and is not overwritten
    with the dummy profit center of the cost center.
    The problem is not caused by a program error in this case. The profit
    center is always derived from the existing CO account assignment even if
    this is the dummy profit center (see also Note 62417).
    This note applicable from release 40 until 605
    I hope this can help you. FYI, in my case, i do not create dummy profit centre, then profit centre working as sap priority.
    Regards,
    Dewi

  • For internal order settlement rule amount column is requied instead %

    Hi Gurus,
    For internal order settlement rule percentage is there but business wants  to settle from AUC to final asset by amount wise how can we do this.
    I tried to change the investment profile but it is coming amount field while saving it is not displaying.
    Please help in this regard
    Thank you.
    Ranganadh

    Hi
    Check the path
    IMG>Controlling>Internal Orders>Actual Posting>Settlement>Maintain Settlement Profile>Maintain Settlement Profile.
    Here there is a tick for amount settlement under Indicators. You need to maintain this check box for your requirements.
    Regards
    Sanil Bhandari

  • Settlement Rule for Internal Order

    Hi All
    I have Maintained Settlement rule for Internal order as under
    CAT - FXA
    Settlement Receiver - Asset
    % - 100
    Settlement type - Full
    Now after settlement of above Order in KO88 . I want again use above internal order. Hence i have trying to put Settlement rule 50% for some anther asset but system gave me following error. Please guide on this issue.
    Total = 50.00%, ( Set.Type PER / Version / Actual settlement ), period 010/2011
    Message no. KD042
    Diagnosis
    You have entered distribution rules which settle 50.00% in total. This applies for settlement view ( Set.Type PER / Version / Actual settlement ) in period 010/2011.
    When checking the percentage total, the system found one of the following errors:
    The total percentage for the distribution rules is more than 100%
    The total percentage for the distribution rules is less than 100% and this is a rule for full settlement.
    The total percentage for the distribution rules is less than 100% and the 100% check is switched on in the settlement profile.

    Hi:
            Please refer to the contents of OSS Note 45612 - IM: pre-settlement does not work, or KD042... which states
    "Symptom
        1. If a preliminary settlement rule (for example, to cost center) is entered for individual items of capital investment measures with line item management, this rule is not considered during periodic settlement. There is no settlement to cost centers.
        2. If you enter a final settlement rule for individual line items of investment measures with line item management for a partial capitalization (that is, the percentage rate is less than 100%), then you receive the unjustified error message KD042 "Total percent = xx%".
    Additional key words
    KOB5, CJ70, CJ88, CJ8G, KO88, KO8G, preliminary settlement, partial settlement, partial capitalization
    Cause and prerequisites
        1. You did not enter the settlement type ACT in the preliminary settlement rule.
        You can check this in the Line Item Apportionment transaction by choosing the menu option "Goto" -> "Overview dist. rules" to display the distribution rule groups entered so far.
        The system displays rules which have no entry in the "SetTyp" field (settlement type, field name PERBZ).
        2. The check of the percentages is incorrect.
    Solution
        1. Install the following correction. Afterwards reverse the incorrect settlement, re-enter the preliminary settlement rule and settle again.
        2. Install the following correction. Afterwards, you can maintain the settlement rule for the partial settlement.
        Note: If you want to use a default settlement rule (maintaining the settlement rule from the master data maintenance transaction), then you are required to distribute the line items at 100%. In order to carry out a partial capitalization (settlement of less than 100%), you have to use menu path "Actual postings -> Period-end closing -> Settlement -> Line item "
    Regards

  • BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT

    Hi all gurus,
    I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
    So the input should be:
    1) Version
    2) period from
    3) periodo to
    4) year
    5) internal order n.
    6) cost element n.
    7) value
    I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
    Can anyone help me on that?
    Kind Regards

    In additio  to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
    If the quoted BAPI is correct.
    I tested it filling all fields as following:
    HEADERINFO:
    CO_AREA=FFCA
    FISC_YEAR=2008
    PERIOD_FROM=001
    PERIOD_TO=012
    DOC_HDR_TX='blank'
    INDEXSTRUCTURE:
    OBJECT_INDEX=000001
    VALUE_INDEX=000004 (hope this point at Interna Order)
    ATTRIB_INDEX=000000
    COOBJECT:
    OBJECT_INDEX=000001
    ORDERID=ZO53-08IMZ
    TOTVALUE:
    VALUE_INDEX=000004
    COST_ELEM=3224048
    FIX_VALUE= 200,0000
    DIST_KEY_FIX_VAL=2
    The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
    Could anyone help me on that?
    Kind Regards

  • I am trying to find a function module or BAPI for internal order change. I

    I am trying to find a function module or BAPI for internal order change. I did come across a function module ALE_INTERNALORDER_DB_CHANGE which directly updates the internal order using insert statements. Can i use this for internal order change or this is any other Function module for updating the internal order.
    I dont want to use BDC as a option. Please suggest.

    This is possible using the Rotator Component Widget from Infosemantics.com.au but it is only compatible with  SWF output, not HTML5.
    Go to this page and scroll down to the video tutorials about the Rotator Component widget:
    http://www.infosemantics.com.au/adobe-captivate/youtube-video-tutorials

  • Report for internal order - year/period comparison

    I want to create a report for internal orders with year/period (from/to) comparison.
    For the present year/period i'm using CCA variables  1YRPERF (Fiscal Year/Period From) and 1YRPERT (Fiscal Year/Period To), created from field FISCPER, table RWCOOM.
    Now i want to creat a column fot the n-1 period (example: if selected current period as 009.2013 to 008.2014 the n-1 period will be 009.2012 to 008.2013), any suggestion what can I do about this?
    Regards
    Carlos Aguiar

    Hi Ajay
    This is for higher education institution that have to report by fiscal year (01-12 months) and by academic year (09.year1 to 08.year2). I have two maps to do this but the challenge is to have a unique map that by dates could retreive both information.
    I need a to have a column giving the total for example the Per/Yr 009.2012 to 008.2013 and other column with the Per/Yr -1.
    I've tried your first option but doesen't work at all because don't work with a period like 009.2013 to 008.2014. Then i made some adjustments: first column was setted to Yr (variable: 6-GJAHV to 6-GJAHB) and Per (variables: 1NPERIV to 1NPERIB). The second column was setted with Yr (variable: 6-GJAH2 to 6-GJAH2) and Per (variables: 1NPERIV to 1NPERIB). Seems to work with a few tests!
    Also i tried to creat new variables "1YRPERF" / "1YRPERT" to n-1, but had some problems with formula.
    1YRPERF have a formula: '#S012-999' and 1YRPERT formula is: '#S012'.
    To 1YRPERF-1 i've defined the formula '1YRPERF' -1, and for the Per to the formula '1YRPERT' -1, but seems to consider minus 1 period that the entry period. I've tried with -12 but didn't work too.
    Thatk's for the help!
    Regards, Carlos

  • Line item display for Internal Order

    Hi All,
    What is the transaction code for  Internal Order line item display.
    Thanks,
    Misbah

    Hi,
    Its KOB1 to KOB4.
    Rgds.

  • ATP for Internal orders

    Hi All,
    I'm a new Oracle user asking for your help. We are using the ATP for make-to-order items only in order to assign to the sales orders a scheduled ship date that consider the manufacturing LT set up in the "Cumulative Manufacturing" field in the org item. We receive two different types of orders- Sales orders and Internal Orders. It looks like the ATP works for the sales orders only. Could you advise if it is possible to set it up for internal orders as well?
    Many thanks

    Hi
    Thanks, but the internal sales orders will be sent to APO with a new Z ATP category. We want to know if this new Z ATP category can be used for example in the BOP also for back order processing.
    Also if there are inconsistencies, can inconsistent sales orders with the Z ATP category also be recognized in the Delta report, or do we need to make enhancements?
    I could not find a clear note which describes if you create a new ATP catagory for sales orders in APO which standard APO eports will work seamlessly with the new ATP categoy. And if the below reports should be enhanced (user exits, BADI etc) to make sure sales orders assigned to a custom ATP category will also be included in the comparisson between APO and R/3.
    Backorder processing: /SAPAPO/BOP
    Deltareport: /SAPAPO/CIF_DELTAREPORT3
    Correction report: /SAPAPO/SDRQCR21

  • Table name for Internal order group and Profit center group

    Hello Friends,
    Could any one provide me the table for Internal order group and Profit center group.
    We are developing new customized report and user requested internal order group and Profit center group in the selection criteria.
    I have checked for this tables but found only these fields in structures.
    Thanks in advance,
    Ravi Kiran.

    Or use FM [G_SET_TREE_IMPORT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=g_set_tree_import] to read the hierarchy/Group. (Read FM and FG documentation, you can also add break-point and call some S_ALRxxx transaction which use this FM for the objects you need).
    Regards,
    Raymond

  • Budget control for Internal Order

    Hi
    Can any one tell me the setting for budget for internal order to avoid excess processing for procurement ?

    You have to configure your GL accounts.
    While creating GL a/c you will have to maintain Field status group as R017   Expense Accounts -Internal Order related in Control of doc creation in co code subscreen in tab Create/bank/interest.
    Hope this will help.
    Enjoy SAP,
    Parag Mahajan

  • BW Datasource for Internal Order and Budget

    Hi Gurus,
    I would like to ask what datasource I can use for FICO specifically for Internal Orders and Budget. I have looked at all the datasources under the CO node but i can't seem to find a datasource that has the details for the Internal Order and for the Budget.
    Thanks in advance
    - Kit

    Hi,
          Check these datasources once.
    0CO_OM_OPA_8-- Orders: Budget Line Items 
    0CO_OM_OPA_2 --Orders: Budget 
    Refer this link as well.
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/de43fcf6e2154bbbbcecbc63cdf287/frameset.htm
    Regards
    Karthik

  • To set and activate 'Create Business Workspace' for Internal Order (KO02)

    Hi All,
    I have an requirement to set and activate the 'Create Business Workspace'  for Internal Order (tcode: ko01,ko02). Can anyone please provide the steps to follow the above configuration. Please find the attached screen shot for your reference.
    Thanks,
    Jamie

    Hi Mani,
    I checked in KO02 and KO03. Please find the below screen shot for your ref. The same issue occurs ie. 'create business workspace' is hidden.
    I checked the authorization for my id, I have SAP_ALL and SAP_NEW profiles so there is no issue in authorization.

  • How to reserve material for Internal order

    Hi,
    How to reserve material for Internal order?
    Please reply ASAP.
    Thanks & Regards,
    Pankaj

    Hi Eli,
    Thanks for the reply.
    I was asking for the integraing of automatic creation of reservation of material.
    please revert back if i need to give more details.
    Regards,
    Pankaj

  • Error message when doing settlement for Internal order

    Hi,
    Can someone please help me to resolve the following error:
    When trying to run settlement for an internal order, following error message is generated:
    Item 001 Order xxxxx budget exceeded
    Message no. BP603
    Diagnosis
    Budget was exceeded by xxxx amount in document item 001 Order xxxxxx.
    Also following points may be relevant:
    - System status ISBD for Internal Order is active
    - There is no PR/PO for the order, direct invoice from FI is created through tcode FB50
    - Availability control: Activation Type 1, Overall field ticked in customization
    - Tolerance  Limits:  Availability control action .... Usage 85 % - Warning message, Usage 100 % - Error message
    Thanks,
    Ankita

    Hi Loong,
    Thanks for reply.
    I have already tried drilling down the report S_ALR_87013019 , however following are the only things available from the report.
    1. There is a year independent overall budget for the order of 92500 amt.
    2. Actual in 2009 is 7870.41 and in 2010 is 77980.24. So the total actual amt is 85850.65 overall.
    3. The available budget is 6649.35. i.e Over budget minus actual utililized amounts.
    Since, in the report it shows that the budget is available then I am unable to figure out why does it give error for exceeding budget by amt 50100.65 at the time of settlement.
    Regards,
    Ankita

Maybe you are looking for