Substitution for Tax reporting date

Hi,
I have created a substitution at document header level to change Tax Reporting date field.
It works correctly when I enter a fixed value or another field value, but when I enter a user exit it does not work in VF11 transaction
Which could be the problem?
Thanks

Dear expert
Problems calculating tax reporting date in VF11 transaction
user exit VF11 for accounting
Regards
  Ajeesh.s

Similar Messages

  • Tax Reporting Date for Cz Republic in report S_ALR_87012357/RFUMSV00

    Hi All,
    We activated Tax reporting date as per SAP Note 1023317. However we are not able to see in the report "S_ALR_87012357 / RFUMSV00" tax reporting date column which should show which document has which date assigned to it. I executed the report with tax reporting date.
    Please help me to find out how to get the column in this report.
    Regards,
    Abishek

    hi Giovanni Baumann  .,
             will u please tell me how u added NAME1 field to on the output list Layout on the report . please guide me on this.
    Regards.,
    S.Sivakumar

  • Tax Reporting Date(VATDATE)

    Hi All,
              We activated the Tax Reporting Date (VAT DATE)  in global parameters for a Company Code so that this field will be populated in all Financial Documents.
                  Sap had given BADI to populate this field based on Document/Posting Date but we had our own substitution logic, but we want to make this field Display only so that user will not have an impression of Input field. Now in screens(FB60,FB01) it is input field.
                      Is there anyway we could do this.

    Hello Sarat,
    May I ask how and when you substituted the logic to populate the VAT DATE?
    Thank you!

  • How to track the history of supplier sites used for tax reporting (1099)

    Hi,
    Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
    How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
    Thanks in advance.
    Regards,
    Ram

    Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

  • Activate tax reporting date (VAT due date) Spain

    Dear all,
    My Spanish customer should start using electronic VAT book, Modelo 340. If I understood correct VAT due date (activate tax reporting date) is a prerequisite for this? If I activate this functionality in their system, what affect will this have except a new field?
    Is it possible to do this during a year or should it be done in the beginning of a new year, from 1st of January? Does it matter?
    What affect will it have on already existing documents?
    If they start to use electronic VAT book, do they not need to use the ordinary Tax report, transaction S_ALR_87100833, then and use only this instead?
    Please help me to understand how to tell the customer of how this will affect them.
    BR L

    Hi Paul,
    I have already red these notes but don´t think that my questions are answered by these. Escpecially the question if ordinary tax report, program RFUMSV00 (transaction S_ALR_87100833) are replaced by Modelo 340, is not answered.
    Could you please help?
    BR L

  • Tax reporting data elemnts

    Hello experts,
    I  am trying to document list of data elements required  for TAX reporting purposes.I understand that there are certain sap reports
    I wanted to capture following process.I was wondering if I can capture the data elements  to build an skeleton so that most of the process can be covered  any advised ?
    Deferred Tax Reporting
    EC Sales Tax List
    Withholding Tax Reporting
    Sales and Use Tax Reporting
    Regards,
    Amy

    Amy-
    Here are couple of reports i can think of for taxes:
    S_ALR_87012360 - Transfer Postings for Deferred Taxes
    S_ALR_87012394 - Record of Use and Sales Taxes (USA)
    In case of withholding taxes, you can use sap line item reports like FBL1N (Vendors), FBL3N (GL Accounts) FBL5N (Customers) and enter withholding tax code in dynamic selection or play around with the layout to get some data.
    I would also look at SAP Menu --> Accounting --> Financial Accounting --> General Ledger --> Reporting --> Tax Reports.
    You will see many reports here too.
    Hope this helps.
    Shail

  • Activation of Tax Reporting Date

    Hello,
    In global paramenters, Company code data, we have "Tax reporting date active". If this is made active, then for the company code the tax Reporting date gets populated automatically in all the accounting documents whereever we use tax codes.
    My Query is "Is it possible to populate the tax reporting date only when we give the Tax code in the document?
    This has come out as requirement.
    Appreciate if you couls help me.
    Regards,
    MG

    Hi Mallikarjuna,
    Could you please share how you achieved the above requirement. Is there any standard functionality available to get it done or any ABAP customization involved. Thanks in advance.

  • Error FF786:"Enter a tax reporting date"

    Hello,
    I have activated "Tax reporting date" field in a company. I have activated in customizing "Company code global data" Tax reporting date active field and I have loaded the 5 option in "Foreign Currency Translation for Tax Items" fields.
    Then when I use FB60 transaction I have no problems, the VATDATE field is automatically filled with the posting date. But in anothe transactions as FBCJ or VF01 there is an error that says " Enter a tax reporting date"
    Why does this error appears?
    Thank you very much
    Edited by: Beatriz Amezua on Dec 31, 2008 11:04 AM

    Hi Sameek,
    Please refer the below link. Hope it helps.
    http://scn.sap.com/thread/1435286
    Regards,
    Chandan.

  • Unable to view field "Tax Report date" (BKPF-VATDATE) in accounting doc

    Hi friends,
    I am unable to get and view the field "Tax Report date" (BKPF-VATDATE) in accounting document when the invoices are atutomatically posted via SD(Transaction VF01) and MM(MIRO transactions). But we can get and view the same field if we post the invoice manually through the transaction FB60.
    Could you please let me know where is the control even to get the same field when the invoices are automatically posted through SD and MM.
    Regards,
    Srinivas

    Hi Paco
    Thank You for your response and sorry for the delay in reply for your message.
    This is solved with the help of SAP Note 1232484. We have run the SAPFACCG and RFBIPPGO and now can be able to see the the field.
    Regards,
    Srinivas

  • Tax reporter date

    Hi Experts,
      Is there any table where the tax reporter date is stored in tables or clusters; I want to know the tax reporter date for a given year.
    Thanks.

    Do U mean to say that U want to trace on which date Tax report has been used?
    If this is the case then U can setup report start log in config (V_T599R).
    Then run the T-code S_AHR_61016381
    ~BiSu

  • Tax Reporting Date Active in Documents

    Hello,
    I have activated the flag "Tax Reporting Date Active in Documents" and I want to select which data the system must take.
    I have found the option to select the Document Data instead of the Posting Data in OBCK transaction but I need to take the payment due date data, is it possible????
    Thank you very much

    Hi,
    Read OSS Note & Do the necessary process:
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1147151
    Note 1147151 - FF 786 although tax reporting date cannot be entered
    Regards
    Viswa

  • Add Vendor Name to S_ALR_87012357 (adv.return for Tax report)

    Hi All,
    Could anyone help how can I add "Vendor Name" to the Output List of S_ALR_87012357 ("advance return for Tax on sales" report)
    Thank you and Regards,
    Orly

    Hi,
    please go to Output section of report
    now click on confiure in front of Input tax line as below
    Now here you have business partner field which will give you vendor name and you have name field as well.
    Many Thanks

  • Help for Refresh report data!

    First, the CR report XML datasource without any issues.
    But, Crystal Report Viewer  pop up a warning dialog window when user click "refresh" buttion on the toolbar of Crystal Reports Viewer.(The user PC didn't install Crystall Reports 2008)
    Warning content as below:
    Failed to load database information.
    Details: The Databse connector "crda_xml.dll" could not be loaded, The correct version of the database client for this database type might not be installed.
    I'm not even sure if I'm asking question correctly.
    Anyone have any information about this question?
    Best Regards.
    Pat

    Hi,Navin
    Thank you for your help.
    To clarify what I am doing.
    I have created a report using "XML and Web Services" by specifying the xsd and xml file. To run the report using different xml data sources, at runtime the app I have created changes the LogonProperties to specify the new required "Local XML File" and the "HTTP(S) Schema URL".
    *Crystal Report 2008 runtime is missing crdb_xml.dll *
    This DLL seems to be missing from the runtime MSI and the merge module?
    Without this I am unable to utilise reports that have "XML and Web Services" connection type and refresh button  on toolbar of Crystal Reports Viewer .
    Any advice on how to achieve the same thing with "ADO.NET (XML)" would be much appreciated in VC IDE.

  • DMEE format for tax reporting - USM1 - structure RFUMS_TAX_ITEM

    Hi Sap experts,
    I'm using the DMEE format USM1, in the structure RFUMS_TAX_ITEM, I don't understand following fields:
    USER_FIELD_1     USER_FIELD_1     CHAR     40     0     First Field Entered by User
    USER_FIELD_2     USER_FIELD_2     CHAR     40     0     Second Field Entered by User
    USER_FIELD_3     USER_FIELD_3     CHAR     40     0     Third Field Entered by User
    USER_FIELD_4     USER_FIELD_4     CHAR     40     0     Fourth Field Entered by User
    USER_FIELD_A     USER_FIELD_A     CHAR     40     0     Field A Entered by User
    USER_FIELD_B     USER_FIELD_B     CHAR     40     0     Field B Entered by User
    How can we use those fields from BSEG / BKPF?
    I would like to use those fields to put additional infomations for the file generation ?
    Can you help me undestand how we can use / customise those fields?
    Thanks!
    Karim

    Any idea, experts?

  • Note 1599687 - New Model 111 for tax reporting

    Hola Buenas tardes,
    Estamos aplicando la SAP Note 1599687 pero hace falta en el PDF Manual_post_implem_steps_1599687.pdf los textos:
    - Campo S_GEN111.
    Podeis decir a Desarrollo,
    Saludos,
    Jorogape

    Buenas tardes,
    Hemos actualizado la nota 1599687 con el paso manual que estaba faltando.
    Muchas gracias por avisar,
    Carlos.

Maybe you are looking for

  • Why can't I move a song from my iPhone (bought in the iTunes Store) to my PC?

    Right, so - I hear a song I like, start up iTunes on my new iPhone 4S, and download it from the store. No problem. Then I get home, connect my phone to my PC and... find that iTunes will not, under any circumstances, allow me to move my newly-purchas

  • XSLT Using document() reference XML DB object

    I have two XML structured documents loaded in XML DB, and I use transform on x1.xml with a style sheet that contains : <xsl:apply-templates select="document('x2.xml')"/> what's the best way to reference the x2.xml found in the database using the docu

  • Problem with CE-Trial Installation

    Hello, I tried to install the trial version of NetWeaver CE from DVD which was included in the book. But when i run the sap management console there is no tree when i expand the node sap system. I cant't find the node CE1. Can anyone help me please ?

  • Characteristic combinations

    I have to implement the following scenario/ I have product as a characteristic.  But it is actually product category.  There are 8 categories.  Each category has 1 to 10 products.    How do I implement this? Product categories: x1, x2, x3, …, x8 X1 -

  • Card invalid

    My iphone 4s does not allow more updates to the apps and leaves no more downloading new software from the app store. When attempting to download applications, reports: There is a problem collecting a previous purchase. Asked to enter the password aga