Substitution Rule for Assessment Cycle

Hii All,
Can anybody suggest how do i define substitution rule for Assessment Cycle??
Reg
Umesh

I have created a assessment cycle thru KSU1 where i assigned SKF key , Thru SKF key i have to define allocation numbers with receiver cost centers but  before that i have to set substitution rule for cycle.
All the common expenses booked under one common cost center
For eg. Expensed booked in GL series 3 - Common Cost Center
in Cycle - Assesment CEle start with 9
In FI - Common Exp GL start with 8
Above Example , when i run the cycle expenses will be allocated in 8 series with receivers cost center
Can ny1 suggest me how to do the process,how to define the rule
REg
Umesh

Similar Messages

  • Trigger substitution rule for a background job

    Hi all,
    I ve written a subroutine in Substitution rules for FI in GGB1 tcode for F110 transaction to replace the section code (bseg-secco) while posting a fi document.
    but the substitution rule is not getting triggered as F110 runs a background job to post the document...
    The substitution is active and the activation level is active all the time.
    Could u please suggest how to get it triggered for a background job...

    Measuring External Processes
    Use
    The runtime analysis allows you to switch into work processes that are already running and to measure the runtime of dialogs running in them as though they were running in the current session. You can have up to ten external sessions, which may be of any type – for example, dialog, update, or spool. This runtime analysis variant is ideal for monitoring long-running background jobs.
    Filename and Directory
    If you do not want to use the default filename and directory to store files, you can change them using the profile parameter abap/atrapath. If the profile parameter does not contain an entry at all, an error occurs when you start the runtime analysis.

  • Substitution Rule for Payment Term

    Hi Expert,
    I have to have Substitution for payment term the following criteria:
    Company Code = '1000' AND Document Type = 'L1' AND Posting key = '14', then ... substitution bseg-zterm with certain payment term.
    Problem: there is no substitution for bseg-zterm.
    I read the post at http://sap.ittoolbox.com/groups/technical-functional/sap-acct/substitution-rule-for-payment-term-489202
    and found that I need to apply a SAP note 42615 in order to enable the BSEG-ZTERM field in Substitution Rule for Payment Term, and after that run Program RGUGBR00 to regenerate the substitution.
    But, problem again, our SAP is ECC 6.0, and the said SAP note is not applicable.
    Kindly advise is there any other way that I can enable the bseg-zterm field at substituion.
    Thanks,
    sbmel

    Hi
    1. Go to SE16N and enter Table GB01
    2. Enter &SAP_EDIT in the command prompt i..e the space where you type your T code and press enter
    3. BCL TAB = BSEG and Field = ZTERM... Execute
    4. Remove the X for the field BEXCLUDE.. SAVE....
    5. Select this entry and menu Table > Transport > Include in tr request
    6. Run RGUGBR00
    Br, Ajay M

  • Table for Substitution rules for profit center

    Can anybody help me with the table name for Substitution rules for profit centers ?
    Thanks
    Sandeep

    Hi
    Check This tables
    CEPC - Profit Center
    CSKS - Cost Center
    Ranga

  • Steps to create substitution rule for field BSEG-RECID

    MIRO generates FI document. FI document has BSEG-RECID field. I need to apply substitution for BSEG-RECID depending on the value of the RSEG-GEBER field in MIRO. The substitution must be activated only if account to be booked is PL account in FI and derived MM document based on ZNPP PO type.
    Field values are as follows:
    RSEG-GEBER     BSEG-RECID
    No value                          No value
    N                              N
    D                              D
    A                              A
    Could anyone please let me know the steps to create the above substitution rule for the FI document
    Thank You

    Hi,
    You can do it as below:
    Prerequisite : Select the document type for which you want check, here you have to select the BKPF-BLART = " " (Give the document type for the MIRO)
    Substitution: Use the User exit with the logic as you said.
    If you want you can use the user exit in both PREREQ & SUBSTITUTION. It will be applicable in your case
    VVR

  • How to define Substitution rule for Businee area

    Hi experts,
    Could you please guide me to define substitution rule for Business are.
    Below is the requiremnt :
    I want to assign different business area for this cost centre.
    While posting document in FB01, we are entering cost centre in line itme. Businee area is picking from cost centre master.
    Example : Cost centre 11310 and businee area Y020.
    Businee area Y020 is picking from cost centre 11310 while posting document.
    I want to assign different business area for this cost centre.
    For that I want to define substitution rule.
    I have defined substitution rule and activated in comapany code but it is not working. Please guide me how to define Substitution rule for the same.
    I have defined prerequisit as Comapny code = 2053 and Cost centre =11310 and transaction code = FB01 then
    Substitute business area with Y045.
    It is not working .
    Please guide me where I did mistake and how to rectify the same.
    Thanks in advance for your quick response and points will also assign for helpfull answer.
    Regards,
    Amar

    Hi Paul,
    Thaks for your reply.
    Yes, you are correct. SAP is changing this back to BA from Cost centre.
    Why can't we use Substitition for the above issue.
    Then what is solution for my issue.Please suggest any alternative solution.
    Thanks in advance for your help.
    Regards,
    Amar.

  • Trigger a substitution rule for a background job

    Hi all,
    I ve written a subroutine in Substitution rules for FI in GGB1 tcode for F110 transaction to replace the section code (bseg-secco) while posting a fi document.
    but the substitution rule is not getting triggered as F110 runs a background job to post the document...
    Could u please suggest how to get it triggered for a background job...

    Hi,
    Please mainatain another substitution rule.
    PREREQUISTE : 40(POSTING KEY )=SPARE PARTS(gl) and 50(posting key )=Inventory write off
    Sustitute : Dtype = VA
    Regards
    jabeen

  • Substitution Rule for F110

    Hi gurus,
    Currently, my substitution rule for tcode 'F110', is not triggered. Because I need to change the value of BSEG-AUFNR (Order Number) to blank after F110. Can you tell me if there's a workaround?
    Thanks gurus.

    Hi,
    Can you please elaborate your scenario. As per my knowledge you can not edit already posted document by using substitution rule.
    Once document is posted substitution is triggered and change that particular documnet, it will not go to any other document whcih is posted earlier and make any changes.
    You can very well go and repost the document or change the document if it is possible.
    Regards,
    Anand Raichura

  • Substitution rule for STO - changing business area.

    Hello Experts,
    We are transferring stock from one plant to another plant. Each plant is business area. We are doing stock transfer at some profit element of Rs. 250. Transfer is done from Business Area D002 to Business Area D001.
    When we do outbound delivery, it posts following entry:
    Stock A/c... Dr (Business Area D001) Rs.1250
        To Stock A/c (Business Area D002) Rs.1000
        To Profit on transfer (Business Area D001) Rs.250
    However, I want to substitute business area for third line. I want that, business area D001 should be replaced with business area D002. However, there is some substitution rule for the same. Please tell me, how this substitution can be done.
    Please help
    Deepak

    What is your price control for your material for both plant ?
    What is the process for your stock transfer ?
    However, as of my knowledge, you can't achieve this accounting entry in standard.
    See, if you are using MAP for material for both plant, then accounting entry will be
    Stock A/C debit for plant D001
    Stock A/C credit for plant D002.
    If you are using standard price for material, then accounting entry will be
    Stock A/C debit for plant D001
    Stock A/C credit for plant D002
    Price diff account credit or debit (as per the price difference for material price for both plant).

  • Asset substitution rules for mass changes

    Dear all,
    I create worklist in order to use substitution rule for mass change.
    But when running transaction AR31 I have following error message:
    No administrator found for the task
    Message no. 5W141
    I found transaction OAWF but what must I do with this?
    Thanks for your help.
    David

    Hi David,
    In sight of resolving the error 5W141 when running the workflow in AR31, maybe following information can help.
    1- Transaction OAWF: check if the responsible users are assigned to the workflow tasks
    Menu path: Basic Functions
                                   Assign tasks to agent
                                             Correct worklist
                                                      Release worklist
                                                                Correct and release worklist
    2- Then also check if the users are assigned to the workflow-tasks in the basis-component (transaction PFTC).
       Menu path: Task type: TS   - Standard task
                             Task     : corresponding task
    Also check the minimum customizing for workflow:  SWU3 => automatic customizing
    Maybe the following SAP Notes help you in addition:
    127931  Workflow for Mass change in FI-AA from 40B on
    322526  Analysis for workflow problems
    152871  Release Upgrade considerations for workflow
    Best regards,
    Brigitte

  • Substitution rule for Business area in F-02

    Dear SAP gurus,
    The client has 2 plants at different locations. 2 plants are created as business areas.
    Our requirement is, when users at bus area 1 are posting expenditure in f-02, the field business area should be automatically filled with '1000'(bus area 1). the users need not manually update the field Business area since they only operate and post in that location. Same functionality is needed at plant 2 also.
    I came to know that this requirement can be fulfilled with Substitutions in SAP.
    Can anybody please tell me how to write a substitution rule for the above requirement. Any other ideas are also welcome.
    Please help me in this issue.
    Thank you very much in advance.
    Regards,
    Vishnu
    VST-ITPW

    Hello,
    You have to do two things.
    1. First you write the substitution in GGB1
    2. Assign the substituion to your comany code OBBH
    In OBBH, write substituion at line item level of the document.
    If the plant = A
    Substitute business area with A
    Check if there are any standard substitutions are available in your system
    just for your reference.
    Hope this resolves your problem.
    Regards,
    Ravi

  • CREATE SUBSTITUTION RULE FOR u0093COPYING LINE ITEM TEXT FOR LINE ITEMSu0094

    Hi every body
    When user post transactions in FB60 we have give the line item text, Suppose no.of lineitems are there in tht instnace my client asked to create the substitution rule to “COPYING LINE ITEM TEXT FOR LINE ITEMS”
    pls tell me the processes how to create the substitution rule
    Plz can anyboby help me out...
    laxmi velaga

    sorry,
    link doesn't work:
    here's the content:
    you must add your rules at event 3 (complete document)
    in an exit of ZGGBS000:
    data htext type bseg-sgtxt.
    *find
      LOOP AT BOOL_DATA-BSEG INTO BSEG
                      WHERE    bseg-sgtxt <> space.
      move  bseg-sgtxt to htext.
      ENDLOOP.
    *copy
      LOOP AT BOOL_DATA-BSEG INTO BSEG
                      WHERE    bseg-sgtxt = space.
      move  htext to bseg-sgtxt
    *modify
      MODIFY BOOL_DATA-BSEG FROM BSEG.^
      ENDLOOP.
    http://help.sap.com/saphelp_47x200/helpdata/en/5b/d231a843c611d182b30000e829fbfe/frameset.htm
    please reward useful answers
    thanks and regards
    Andreas

  • FI substitution rule for Business area  on New GL view(FAGLFLEXA)

    Hi Gurus,
    Need a your expertise guidance.
    We have a requirement to substitute u2018Business areau2019 field on GL view(table u2013 FAGLFLEXA) for all FI postings.. I am trying to achieve this by OBBH substitution rule using user exit, Is this possible anyway??
    I have already worked with my developer, but he is not getting any clue to write a logic in the user exits available in OBBH.. can anyone please guide us..
    Actual requirement is to update u2018Business areau2019 field on all FI postings at new GL view for some of the company codes (not all), I am not sure if we can achieve it by activating document splitting by business area field.. we have document splitting active already by profit center and segmentu2026
    Please guide me..
    Many thanks in advance..
    Prasad

    HI pampana,
    If you add the Business area is document splitting char's  with Mandatory check box
    then reach and very line will update the business area value in Doc splitting.
    But you allready have profit center as a doc splitting char's
    If you want to Business area is new doc splitting char's then you need
    go for NewGL migration.
    Please refer the NewGL migration scenario 6, 7 for your case.
    please check the link
    http://wiki.sdn.sap.com/wiki/x/JghNCw    (NewGL Migration Secnarios)
    Regards
    Madhu M

  • Substitution rule for Business place and section code

    Hello Friends,
    We have a business place and a section code. I want to write a substituion rule for vendor invoice for business place and section code.
    When i see in header, i am not find BUPLA and SECCO in header. I am finding them in line item. How do i get these fields in header segment. I tried substution rule in line item, but the tds is not deducted.
    Thanks
    SK

    hi SK,
      i am not understand your problem. Previously i face one problem regarding business place and section code. While booking invoices and advance payments the user forgets to specify business place or section code and some times he specifys wrong business place also. Basing on business place or section code we cant restrict the users because there is no authorisation object.
    i created one validation that if my business area is 1000. then substitute the business place field with section code.
    we have business place individual business area wise so i created this substitution.
    Regards,
    Sankar

  • Substitution rule for AS01

    Hi
    I want to create a substitution rule to derive jurisdiction code automatically based on responsible cost center for AS01 transaction. How to achieve this. kindly help me. (Create substitution OACS)
    Thanks

    Hi Friend,
    Transaction GGB4 is very usefull.
    Click on Active Subst/Validation, the click on Asset Accounting, make an entry for substn with company code and call point (item level or header level).
    Under that substitution, create step and rule.
    At the time of creating step SAP will ask for exit or constant.
    (Be aware give prerequisite as transaction specific).
    Regards
    Krishnendu

Maybe you are looking for