Substitution rule has to triggered after save document in FB70 and FB75

HI,
I have a substitution rule for REFNR field and that will trigger when you make FB70 and FB75 for 2 company codes. In the user exit for subustitution we have a code to get the next object number for some other purpose. because third party will use this generated next number for their legal requirement.
The real problem comes this substitution rule is triggered before save document. due to this if i came back from the transaction without saving the document I am losing that generated number which i dont want.
I need some tips on this. is there a way in the substituion settings we will trigger this exit at save document.
I would appreciate your inputs on this.
Regards
PRasad

Hi Rob,
I would like to know.
call point 001 is document header
call point 002 is document item
call point 003 is complete document.
I am assuming 003 triggers after complete the document.
Any clue on this.
Regards
PRasad

Similar Messages

BADI or BTE which triggered after FI Document Post

Hi ,
I am looking for solution to change document in Loans module i.e. VDBEKI based on residual document created in FI. for that I am searching for BADI or BTE which will triggered after FI document post.
Thanks in Advance.
Regards
Vimal

Try using 1030 or 1050.
Regards,

Add eventlistener to catch after save document event?

How can I catch a after save document event?
Best regards
/ Pontus

http://127.0.0.1:63632/help/index.jsp?topic=%2Fcom.adobe.cside.docs%2Freferences%2Fcshalib %2Fcom%2Fadobe%2Fcshostadapter%2FIDScriptingEventAdapter.html
Harbs

What is going on with Lion???? Something has happened to my Mac Pro since I got Lion! I cannot save documents in Word and as a consequence have lost files....God knows where they are!!! HELP!

What is going on with Lion??? Something has happened to my Mac Pro since I got Lion! I cannot save documents in Word, or at least if I do I have no idea where they are after I save then, Word does not know either! I have never seen this before? As a conseqience I have lost files despite saving them in the usual way......God knows where they are! In the middle of all this I am suddenly asked for my Mobile Me password,,,,,in Word??? What is going on? Help!

Update to latest patched version that no longer relies on Rosetta and PowerPC
Visit www.RoaringApps.com for a list and table of what version is supported, can be updated and which are not.
A year ago this was news.
Hopefully people kept a boot drive with the old OS so they could dual boot for a month or two whiile sorting out the changes and updates.

SAP CRM Which BADI is triggered after SAVE

Hi All,
I am working on one Interaction center requirement. Basically I would like to know which BADI isgetting triggered after hitting the save button in Complaint tab in CRM WEB UI. I need to enhance that BADI to create transaction link to my interaction record in transaction history tab.
I appreciate your help in advance..
Thanks,
Sar.

Hi Krishnan,
My requirement is we have complaint tab configured in SAP CRM interaction center. User can create complaints in CRM UI using complaints button. After creating complaint one button is active for the user like 'Create notofication' User will click on that button it basically calls Transcation laucher in ECC visa SAP GUI to create notification with reference to this Complaint. after creating the notifcation in ECC and after hiting the back button in CRM UI we have to create a link with notification created in ECC in transcation history tab in complaint.
As I am trying to update the documnet flow in my transaction launcher class I am getting the message saying that 'Order is locked my user id'. This is becuase as I am using the SAP GUI as TL the session is still open in CRM. So I am trying to create the link after hiting the save button for the complaint IN CRM Web GUI.
I am not sure which option is better in this scenario. Enhancing the Complaints Component or writing the code in BADI or using the update task in my transcation launcher class. I am not sure how frequently we can use the update tasks in CRM not user if it works for CRM UI scenarios.
Any suggestion are helpfull..
Thanks,
Sar..

I am needing to send a document that can be filled in from drop down fields I have created. After the document is filled and signed I need the form to be locked from further changes

I am in need of help with someone being able to fill in and sign a form in Reader that I created in Adobe Acrobat XI Pro. After that document is sign I need it to be locked from further changes. Can someone please help

Hi Suzette,
Once the document is digitally signed it will not allow further changes.
You might want to check the solution mentioned in the thread: Re: Convert editable PDF to read-only when sent in an email - JavaScript
Regards,
Rave

Previous Workitem has to disappear after save

Hi,
I have a Travel Transaction where after each
SAVE click it creates a new workitem. But it should be
updated in the same workitem until it is processed
by the Approver.
what is that i have to do?
Thank you.
Regards,
Boobalan

Hi,
I am using Fork to capture 'Changed' & 'Approved' Event.
This is for Travel Workflow.
when Approval is done from Transaction(ouside of workflow).
Before Approval status is 3.
After Approval status is 4.
Here the problem is I have to decide based on 4 some conditions for 2nd Level Approval.
But After approval also the Trip.Approval Flag is 3,
where as after i go out to see log, it is 4.
I think the first Event triggered is 3 and then 4.
could there be any way that the 'Changed' event is also the 'Approved' event. After the Approved event it is 4.
Please reply if you have any idea as the above scenario.
Regards,
Boobalan.

POWL WD: No action has been triggered after toolbar button click

Hi,
I am using standard SAP Web dynpro application POWL for creating Service entry sheet from PO.
On the toolbar we have buttons 'Create Service Entry Sheet', 'Display Service Package', 'Document tracing'.
When I click on the row with the corresponding PO and then click on above mentioned buttons nothing happens, I can see at the taskbar : javascript:Void(0), which probably means that no action has been attached to that button.
I have debugged the WD, seems to be OK, perhaps I am missing some configurations, because I've already traced my authorizations and they are OK
What could be the problem ?
Please advise !
Thanks,
Stefan
Edited by: Stefan Kolev on Mar 6, 2012 2:56 PM

Haven't gotten any response on this post and I really need to resolve this issue. Anyone can help??
Eric.

HT1918 revised credit card expiry date not updating on my account, warning box says card has expired even after i change the details and security code. anyone know how to correct this?

has anyone experienced this i want to update my card details on my account but it says card expired even when i put in the new expiry date and security codes.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then edit your payment details.
If that doesn't help, tap Settings > General > Reset > Reset All Settings. Then try again.
iTunes Store: Changing account information
iTunes Store: Accepted forms of payment

My iphone has gone dead after updating to os 6 and wont power up help

I got an update for os 6.started update but after a while the phone went dead and now it will not power up.if i cant power it up i cant restore it in itunes.any advice would be great.

Seems like you are restoring from a blank back up if it is still asking you those 3 options of set up as new, restore from itunes or icloud back up. Set the iPhone up as new then manually restore from a back up. Follow the steps foriTunes 10.7 or earlier in the article below as it is the same process for iTunes 11:
http://support.apple.com/kb/ht1766
When you do this you will be able to check for backs showing date and time. Be sure to choose a back up made before you restored to factory settings.

My iTunes Match still has not finished after 3 1/2 days and step 3's total number keeps changing, Why?

So I finally broke down and subscribled to iTunes Match just to see how it is and if it would be worth it to me. well right now im about to wig out because its been 4 days and i still have not gotten past step 3 on the proccesing...now to itunes match's defense, or iMatch as ive seen it called, i do have an emense itunes library of movies, tv shows, podcas, ringtones, and music (somewhere around 15,000 total) so I knew it would take a while, but 3 days?! And thats not even the problem, thats just a little grip I have cuz now I can't access my music on my iphone almost everything is greyed out.... i gould a back door to it where if i shuffle the album and skip to the song i want then that will work BUT! thats too much of a hassl!
Ok enough ******** cuz ima sit here just to see how long it takes and report back. Now for the real question.... I want to know that in all this waiting why does step 3 where it uploads artwork and remaining songs total number keep changing, i.e. :
this is the screen ive seen for the last 3 full days, and the total items uploaded keeps changing yesturday it said 1500 of 7000
so is it updating the number as it uploads them or what? It's confusing but im trying to give it a chance.

*Update*
ok so day 4-5 and im still not finished with the inital iMatch process.... BUT i found out that nothing was wrong its just taking for freakin ever. oh well at least i only got 1000 more to go....

Which event is triggered after a column in a gridstyle treeview datawindow has been moved or resized

Hi all,
I'm using a gridstyle treeview datawindow with 2 levels.
What I want to do now is when I move the most right column on the screen e.g. 2 columns to the left the information in the level 1 should stay at the same place but the information in the detail and the header level should move to the left.
I wrote a function that is doing what I want and it works fine if I call that function in a clicked event of a button: e.g. I move the most right column to the left and then click the button to simulate that a event has been triggerered after moving or after I resize a column and then hit the button.
So my question is what can I do to trigger my function after a column has been moved or after a column was resized?

Hi Thomas, Try these steps:
1. Create a ue_lbuttonup user event mapped to pbm_dwnlbuttonup in DW control.
2. Create another user event named ue_checkmodified. This is not mapped.
In ue_lbuttonup, enter the below code:
This.event post ue_checkmodified()
In ue_checkmodified event, enter:
If this.Object.DataWindow.Syntax.Modified = "yes" Then
... Your logic goes here...
End If
That's it.
HTH,
Neil

Substitution rule: (CJ20N)Move PROJ-PLSEZ to ANIA-AKTIV based on condition

Hi,
    I am facing problem in creating a substitution rule in t-code OPSN. On project save in CJ20N PROJ-PLSEZ(finish date) is to be moved to ANIA-AKTIV (activation date).
    I am aware of the client specific user exits and i have successfully created a substitution rule for some other fields(Copying standard program RGGBS000 and setting the necessary configuration in SPRO). The problem is that ANIA structure is not available in the program. Could any one please help me out in solving this problem.
Thanks in advance
Rajesh

Dear Rajesh,
   The structure ANIA is not available in Substitution rule. You have to find some other exit to achieve your objective.
   I'm sending a comprehensive list of exits in tcode OPSN. Also try finding some BADI.
Transaction Code - OPSN                     Edit PS substitution rules
Exit Name
Description
CNEX0002
PS Authorization check
CNEX0006
PS customer specific fields project definition
CNEX0007
PS customer specific fields WBS element
CNEX0009
Material components in network
CNEX0011
BOM explosion in network on component overview
CNEX0012
Derive external network number from WBS number
CNEX0014
External data for BOM transfer
CNEX0015
Change BOM data for BOM transfer
CNEX0016
PS customer-specific fields in the network headerf
CNEX0017
Customer-specific node info. in network graphic (netw. mnt.)
CNEX0018
Customer-specific node info. in network graphic (info. sys.)
CNEX0019
Customer-specific node info. in network graphic (std. netw.)
CNEX0020
Extra info in DIN field of network graphic (netw. maint.)
CNEX0021
Extra info in DIN field of hierarchy graphic (netw. maint.)
CNEX0022
Extra info in DIN field (standard network maintenance)
CNEX0023
Customer-specific node info. in the hierarchy graphic
CNEX0024
Customer-specific graphic title in Gantt chart/Proj.Plan.Brd
CNEX0025
Additional field for project summarization
CNEX0028
Check activity release
CNEX0029
Check network release
CNEX0030
Update event for BOM assignment
CNEX0033
WBS: Predefine Search and Replace String
CNEX0034
Check a New Allocation in BOM Transfer
CNEX0035
Check a Change in BOM Transfer
CNEX0036
Check deletion as part of BOM transfer
CNEX0037
Check a freshly created component
CNEX0038
Check a changed component
CNEX0039
Check deletion of a component in a network
NWTM0001
Set Field Contents for Event Date Type
NWTM0002
Display source document
NWTM0003
Structure of the Objects for Monitoring Dates
No of Exits:         31
Regards,
Deva.

Trigger a substitution rule for a background job

Hi all,
I ve written a subroutine in Substitution rules for FI in GGB1 tcode for F110 transaction to replace the section code (bseg-secco) while posting a fi document.
but the substitution rule is not getting triggered as F110 runs a background job to post the document...
Could u please suggest how to get it triggered for a background job...

Hi,
Please mainatain another substitution rule.
PREREQUISTE : 40(POSTING KEY )=SPARE PARTS(gl) and 50(posting key )=Inventory write off
Sustitute : Dtype = VA
Regards
jabeen

How can I save document.

After typing document on line and sent out, how can I save?

Give a specific example of what you are doing. The only way that I can think of to save a document that you fill out online would be to copy and paste the document into a word processing app - unless the site has some means of saving the document as a PDF file.

Substitution rule has to triggered after save document in FB70 and FB75

Similar Messages

Maybe you are looking for